As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

✓ Location: Defu Lane (Hougang)

✓ Working Hours: Monday to Friday, 9.00am to 6.00pm, Saturday, 9.00am to 1.00pm

✓ AWS

✓ Medical Benefits

Job Scope:

• Attend to customers' requests Service / Repair / Maintenance enquiries
• Quotation
• Build sustainable relationships and trust with the customers and committed to increasing customers' engagement level
• Evaluating and improving the current practices and processes as part of workshop operation
• Ad-hoc duties

Requirements

• At least 1 year related experience in workshop operation

EA Personnel Name: Nicholas Poh

EA Personnel No: R24123432

EA License No: 16C8443

Customer Service & Logistics Specialist

1 year contract, potential to renew

Come and join us!

Do you wish to work in a world-class organization trying your hands at something you have dreamt of doing?

“FIND YOUR PLACE” by joining a world-class MNC Healthcare company

Get an opportunity to explore new technology, learn new skills, enjoy the diverse and open culture, engagement and care, flexible working model, career opportunities, competitive salary and bonus, and endless amenities and benefits.

Company Description:

Our client is an MNC Healthcare company. As a focused healthcare company, with expertise in Innovative Medicine and MedTech, they are empowered to tackle the world’s toughest health challenges, innovate through science and technology, and transform patient care.

Job Purpose:

Responsible in ensuring customer satisfaction through effective management of the customer order processing function. Accountable for timely response to Customer/Customer Development/Sales team’s inquiries and resolving Order to Cash (OTC) process issues. Plan, co-ordinate and control the activities of the customer service team. To maintain and enhance customer relationships and in order to meet the organizational and operational objectives.

Duties and Responsibilities:

• Ensuring the day-to-day order management activities are executed flawlessly and timely.
• Works closely with Commercial partners to measure customer satisfaction relating to ordering process and delivery management.
• Responding to customer queries in a timely and accurate way, via phone, email or chat
• Build sustainable relationships of trust through open and interactive communication
• Order management inclusive the following:

o Processing of orders, consignment fill up, billing and returns

o Product recall handling – collection & replacement

o Generate backorder report

o Generate sales order report

• Consignment Inventory Management
• Project Management
• Participates Customer’s supply chain related meeting / review
• Actively notify management on the changing needs and recommends process changes to accommodate customer requirements.
• Responds to and resolves complex customer complaints.
• Work with 3PL/4PL to ensure service and order deliver on time to customers and collaborate on specific projects or initiatives to support business growth or process improvements
• Ensure Customer Service activities are aligned with the total Supply Chain strategies
• Participate actively in alignment and adherent to business objectives, policies and procedures
• Undertake any other duties or responsibilities deemed necessary for the advancement

Qualification:

• Degree Holder preferably in Business Management, Economics, International Studies, with minimum 1 year of Customer Service/ Supply Chain/ Order Fulfilment experience
• Experience in Healthcare sector is a plus
• SAP System knowledge, especially in “Order To Cash” process
• Basic Understanding of EDI or VMR or Order Management Process
• Basic Understanding of Return & Rejection Process
• Strong in Analytical Skill, Problem Solving and PC Literate
• Understanding of basic business finance
• Strong leadership and decision making skills
• Demonstrated ability to handle multiple tasks
• Ability to adapt to an ever- changing supply chain environment and organization development driven.
• Willing to work on Public Holiday / Extra Working Hours. Off-in-lieu/ Time-off will be compensated
• Strong application and knowledge of MS Excel, Words and PowerPoint

Interested parties, please apply through this link https://jnj-apac.talent-pool.com/projects OR click on APPLY button.

Alternatively, you can share your CV at [email protected]

EA License: 94C3609

Reg No: R1440247

job Description & Requirements

Job Objectives/Job Summary:

As a Customer Service Executive, he/she is required to ensure customers receive outstanding support and all their needs are met. He/she oversees the customer support department’s day-to-day functions as well as establishes standards and protocols to be used by the customer service team to promote customer satisfaction.

Responsibilities/Duties:

· Prepare quotations and submit to customers

· Handling/processing of customer sales order

· Monitoring of delivery status

· Logistic arrangement/coordination for local and overseas shipment

· To support sales personnel in new project coordination

· Supporting sales team in processing documentation for sales

· Ensure customer satisfactory are met

· Coordinating with internal department on job orders and requirement

· Follow standard operating procedures

· Any other ad-hoc duties as assigned by HOD

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The Candidate will be working on dynamic modelling and simulation of the powertrain of a full electric tug vessel, mainly using MATLAB/Simulink. The simulation models will be used to investigate the steady state and transient behaviour of the ship’s electric propulsion system.

Key Responsibilities

• Development of dynamic models of the ship’s electrical propulsion system including energy storage systems.
• Investigate steady-state and transient behaviours of an all-electric ship’s electrical system in various operational scenarios.
• Carry out mission-specific electrical power consumption analysis
• Electrical propulsion and ESS design optimization.
• Any other duties as assigned by the supervisor.

Job Requirements

• Bachelor's Degree or above in the areas of Electrical Engineering, Mechanical Engineering or Marine Engineering
• Other relevant disciplines are welcome to apply
• Background in programming languages and related research project experience is ideal

Job Description

• Optimize Shopee Ads core advertising strategies, such as traffic selection, smart bidding, ranking strategies and auction mechanisms.
• Provide solutions to long-term challenges like cold start, stability, and ecosystem development for the platform.
• Participate in the development and iteration of Ads algorithms by using Machine Learning.
• Enhance the efficiency of automated delivery products, combining intelligent product selection with full-chain optimisation to improve ads performance.
• Deeply understand buyer and seller demands to create incentive-compatible, mutually beneficial advertising strategies and products.
• Continuously improve the monetisation efficiency and user experience of Shopee’s advertising products, increase monetisation efficiency and driving the healthy, sustainable development of Shopee advertising

Requirements

• At least 3 years of relevant experience in algorithm-related roles
• Minimum 2 years of hands-on experience in one or more of the following areas: machine learning, recommendation systems, computational advertising, pattern recognition, data mining, or artificial intelligence.
• Hands-on experience with machine learning frameworks such as PyTorch, TensorFlow.
• Bachelor’s degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience.
• Strong communication skills, collaborative team spirit, and a product-focused, data-driven mindset.
• Experience in ecosystem construction, monetisation efficiency, or mechanism design is preferred
• Prior experience in e-commerce companies is preferred

Job Title: Arcade Amusement Center Service Crew

Position Overview

As a member of the Arcade Amusement Center Service Crew, you will be responsible for ensuring a fun, safe, and enjoyable experience for all guests. You will assist in the operation of arcade games, provide excellent customer service, maintain cleanliness and order in the facility, and perform various tasks to support the overall operation of the center.

Key Responsibilities

1. Customer Service:Greet and welcome guests upon arrival.
   Assist guests with game instructions, prize redemption, and general inquiries.
   Handle guest complaints and issues promptly and courteously.
2. Game Operation:Monitor and maintain arcade games and equipment.
   Troubleshoot and perform minor repairs on arcade machines.
   Ensure all games are operational and report any malfunctions to the maintenance team.
3. Cash Handling:Operate the cash register and handle financial transactions accurately.
   Process payments for game tokens, tickets, and merchandise.
   Balance cash drawers at the beginning and end of shifts.
4. Facility Maintenance:Keep the arcade clean and organized.
   Regularly sanitize high-touch surfaces and game equipment.
   Ensure restrooms and common areas are clean and stocked with supplies.
5. Team Collaboration:Work cooperatively with other team members to ensure smooth operations.
   Attend team meetings and training sessions as required.
   Assist in special events and promotions within the arcade.

Qualifications

• Previous experience in customer service or a similar role preferred.
• Basic knowledge of arcade games and equipment is a plus.
• Strong communication and interpersonal skills.
• Ability to handle cash transactions accurately.
• Ability to perform physical tasks, including lifting and standing for extended periods.
• Availability to work flexible hours, including evenings, weekends, and holidays.
• able to communicate fluently in English and mandarin

Personal Attributes

• Friendly and outgoing personality.
• Strong problem-solving skills.
• Attention to detail and a proactive attitude.
• Ability to work well in a team-oriented environment.
• Passion for providing excellent customer service.

5 days work week available on request

United Medicare Centre (UMC) is a leading private nursing home providing trusted care and quality life since 2003.

We are looking for a candidate to support the company mission by providing leadership for daily operations and high standard of services to our residents and their families.

Responsibilities:

• Provide leadership day-to-day operations of non-clinical activities in the company portfolio of Nursing homes including Front desk admin/clinical logistic management eg store, procurement, transport.
• Ensure compliance with all health, safety, and regulatory requirements.
• Collaborate with clinical and operation heads to ensure optimal operations within the nursing homes.
• Analyse department performance and implement improvements as needed to achieve operation and financial targets

Qualifications and requirements

• Degree or Diploma in hospitality management, Business Administration, or a related field.
• Minimum of 5 years of experience in hotel or hospitality operations management
• Excellent communication and interpersonal skills.
• Commitment to delivering high-quality service to partners and customers

We're seeking a skilled Quality Engineer to join our team, focusing on automated testing for scalable applications. As a Quality Engineer, you'll play a critical role in ensuring the reliability, performance, and scalability of our products.

Key Responsibilities

• Develop and execute comprehensive testing strategies to guarantee product quality, reliability, and scalability.
• Collaborate with cross-functional teams to validate product integration, performance, and uptime, ensuring seamless deployment and user experience.
• Design, develop, and maintain automated testing frameworks using Jest (TypeScript) for unit testing and Playwright (TypeScript) for integration and end-to-end testing.
• Implement API stress testing using Locust (Python) to identify performance bottlenecks and ensure system resilience.
• Analyze test results, identify trends, and deliver detailed reports to stakeholders, informing product development and optimization.
• Collaborate with developers, product managers, and stakeholders to create testable requirements, resolve defects, and ensure effective testing.
• Stay up-to-date with advancements in testing methodologies, tools, and frameworks, applying this knowledge to improve testing efficiency and coverage.

Requirements

Essential Qualifications

• 3+ years of experience in quality engineering, focusing on automated testing for scalable applications.
• Proficiency in TypeScript, with experience using Jest for unit testing and Playwright for integration and end-to-end testing.
• Strong knowledge of API testing tools and frameworks, with hands-on experience in Locust or similar performance testing tools.
• Proven ability to design efficient test cases, think critically about edge cases, and ensure code reliability.
• Excellent problem-solving skills, with the ability to communicate testing strategies, findings, and recommendations to technical and non-technical audiences.

Nice to Have

• Experience with applications leveraging generative AI technologies.
• Interest in data science, artificial intelligence, and machine learning

Job Responsibilities:

• Over-all project management, which includes planning and implementation of assigned projects

• Planning and monitoring of progress and timely completion of projects which includes preparation of detailed progress and status reports

• Coordination with clients & consultants to ensure smooth communication

• Directly reports to the Project Manager

• Preparation of samples according to the requirements of the project

• Ensuring smooth procurement process and timely deliveries, which includes preparation of status reports

• Coordination of deliveries on site

• Issuance delivery orders

• Attending site meetings for smooth coordination

Requirements:

• Minimum Diploma in Electrical/Electronic/Microelectronic/Mechatronic/Green Building & Sustainable or related engineering diploma.

• Minimum 1 year of experience in engineering field

• Computer knowledge in Auto CAD will be added advantage.

• Ability to plan & monitor project progress to ensure timely completion

• Ability to communicate with clients & consultants · Willingness to learn & improve personal skills through team work

• Knowledge in basic project management e.g. preparing monthly project reports, site planning, monitoring & control processes and project risk analyses.

• Good work ethics and team player

• Knowledge in lighting technology and lighting design or electrical engineering fields

• Able to start work immediately

• Design and Development:
  • Design, model, and prototype robotic systems, mechanisms, and components using CAD software (e.g., SolidWorks, AutoCAD).
  • Develop control systems for robotics, integrating sensors, actuators, and motors into functional designs.
  • Create detailed technical specifications, design documents, and test plans for robotics systems.
• Testing and Optimization:
  • Conduct performance testing of robotic systems and components to ensure they meet functional requirements.
  • Analyze test results, identify areas for improvement, and refine designs for optimal performance.
  • Troubleshoot and resolve design, mechanical, and electrical issues.
• Collaboration:
  • Collaborate with electrical, software, and manufacturing engineers to ensure seamless integration of robotic components.
  • Participate in brainstorming sessions and design reviews to innovate and improve robotic designs.
• Research and Innovation:
  • Stay up-to-date with the latest trends and advancements in robotics, automation, and related technologies.
  • Apply cutting-edge design principles and technologies to create high-performance, cost-effective robotics solutions.
• Documentation and Reporting:
  • Document design processes, test results, and modifications for future reference and continuous improvement.
  • Provide regular progress reports and presentations to management and stakeholders.

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

Application Mode

• Apply by Whatsapp +65 8522 9666

Reporting Structure: Section-in-charge

Job Responsibilities:

• To clean the kitchen areas.

1. Fryers/Stove areas
2. Working stations/cabinets
3. Walls of cooking stations/chiller
4. Kitchen floors
5. Glass windows

• To wash cutleries and ensure sufficient supplies for daily usage.

1. Cooking utensils
2. Cutlery

• To clean the dining areas.

1. Cutlery collection
2. Top up condiments
3. Prepare condiments

• General Cleaning

1. Shopfront exterior
2. Interior furnishings
3. Table/chairs/sofa seats

• To remove garbage to the designated garbage disposal area.
• To report to the Supervisor any potential hazard and/or breakages
• To comply with all safety and hygiene standards.
• To undertake any other related task/duty/assignment that may be given by the supervisor.

Personal Educational Qualification/Experience

· Minimum secondary school

• At least 1 years of operations experience in the supervisory position with proven track record of success within a Restaurant or Fast Food environment

**Variable Bonus, Merit Increment & Promotion, Staff Discount, Full Attendance Award, Referral Scheme, Grooming Allowance, Dental Benefits, Insurance, Birthday Vouchers, Festive Gift** (Terms & Conditions apply)

Summary:

• Salary structure: Basic salary + OT pay
• Basic salary up to $2500 + OT up to $1500
• 5 days work week
• Normal office hours @ 8.30 - 5.30pm
• Location: Islandwide
• Company vehicle will be provided for travelling purposes
• Locks, automatic, and security doors

Key Responsibilities:

• Carry out schedule and retrofits automatic door parts
• Troubleshoot and conduct site check on the automatic entrance and propose recommendations
• Provide site report to client for the purpose of completion of works
• Perform testing and commissioning
• Decommissioning and conduct risk assessment of all products
• Keep updated on product information for both company's and competitor's products
• Other relevant ad-hoc duties assigned by the manager

Key Requirements:

• Class 3 driving license is a must
• Must have at least some door automation related working experiences

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Summary:

Drives the design chain value proposition by generating the greatest number of Xilinx design wins in technologies and registrations for customers engaged in Xilinx based product design resulting in growing business. Interface with the engineering departments of customers and suppliers. Performs a variety of product, technical and engineering functions including but not limited to: pre/post sales support, research, design and development.

Principal Responsibilities:

• Work with sales to explore new customer base which use Xilinx products.
• Deliver technical solutions / proposals and provide product presentations to customers.
• Provide technical support to customer which are using Xilinx products from start of development to design win closure.
• Provide technical training to customers
• conduct seminars and workshops
• Willing to travel
• Must be proactive and constantly striving to keep abreast of latest advances in Xilinx technology.

Job Level Specifications:

• Must be highly motivated and able to work independently
• Strong interpersonal and communication skills.
• Good team player
• Good analytic and problem-solving skills
• Integrity & Trust
• Excellent in time management.

Work Experience:

• Minimum 3+ years work experience in Programmable Logic based design / ASIC / Processors / GPU
• Proficient in VHDL/Verilog/C++ programming
• Experience working on AI solutions development using Caffe, Tensorflow, Keras, Pytorch frameworks is a strong plus.
• Experience working on systems in one or more of the following areas is a highly desired: Software Defined Radios, Wireless Communication Systems, Artificial Intelligence,.

Education and Certification(s):

• Bachelor's or Masters Degree in Engineering or equivalent.

The Position

This position is responsible for overseeing the daily operations of the customer service team, ensuring exceptional service delivery, and fostering a positive team environment. Supporting Eye care Practitioner (ECP) by addressing any concerns and feedback may have with empathy and professionalism.

Major Responsibilities

Supervisory

• Oversee and supervise a team of assigned customer service officers and ensures comply with company guidelines particularly related to quality of service.
• Improve Customer Service Officers communication skills by conducting training on Hoya’s ophthalmic lenses and optics related topics.
• Proficiency with all the in-house systems and tools, provide training and coaching to Customer Service Officers.
• A point of contact for demanding customer inquiries or complaints that require escalation beyond the Customer Service Officers.
• Coordinate daily workload with customer service team according to operation plan.
• Continuously review standard operating processes and workflows to identify ways to improve and increase customer satisfaction.

Customer Service

• Manage incoming phone calls, identify, and assess customer’s needs to achieve satisfaction.
• Build sustainable relationships and trust with customer accounts through open and interactive communication.
• Resolve product or service problems by clarifying customer’s complaint, determining the cause of problem, and explaining the best solution to solve the problem, expediting correction or adjustment, and follow up to ensure resolution.
• Handling reports related to complaints, feedback and product issues from internal and external.
• Ensure all orders are entered in a timely, efficient, and accurate manner.

Back-end Processing

• Receive and process incoming orders through phone calls, emails, fax, and online ordering system. And ensure that customer orders are processed in an efficient, accurate and timely manner.
• Ensure proper tracking on all the orders, liaise with factory, and updates customer on the estimated delivery timing.
• Coordinate & liaise closely with various internal departments & external parties to ensure timely service delivery for customers

Others

• Other duties may be assigned as business needs arise.

Qualifications

Education:

• Diploma in Optometry or equivalent

Experience:

• Preferred 2 years of relevant working experience in optical retails
• Familiar with the use of Microsoft Office products (e.g.: Word, Excel & PowerPoint)
• Customer service experience is an advantage
• Supervising experience is an advantage

Behavioral attributes:

• Strong phone contact handling skills and active listening.
• Strong problem-solving ability
• Ability to work in a fast-paced environment.
• A team player with great interpersonal skills.
• Positive attitude.

Others:

• Able to work overtime (as needed based on business requirements)
• 5.5 days’ work week (alternate Saturday):
• Mon, 9.00am – 7.00pm
• Tues – Fri, 9.00am – 5.30pm
• Sat, 9.00am – 1pm

The Account Director serves as the primary liaison with senior clients and will manage a team of Account Managers and Account Executives.

Required Skills & Preferred Qualifications:

• Possess minimum 5 years’ experience in advertising and/or marketing communications
• Must have integrated communications experience across TV, print, radio to digital, mobile and social media
• Lead development of strategic execution plans and proposals for IMC’s
• Ability to work collaboratively with internal planning, creative and project management teams to deliver solid work
• Proactively resolve the client’s problems and provide execution ideas
• Good finance controller in quotation and project cost control
• Basic understanding of research methodologies
• Proficient in written and spoken English
• Possess excellent presentation and selling skills

Interested applicants, please send your resumes to [email protected] indicating current and expected salaries.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Order and Planning Manager to make an impact!

What will you do?

The Service Order & Planning Manager is responsible to ensure the Service Orders & Contracts are well created and booked according to the Customer’s Purchase Orders ensuring all relevant detailed information are correctly recorded in the IT system. Also responsible for scheduling the execution of Service Operations at the customer site ensuring spare-parts, tools, instructions, workforce, travel optimization, qualified Services Representatives, to allow the service execution team to properly implement the service delivery and the Customer expectations.

As a manager, he/she has to ensure competencies availability and renewal inside his/her team, work capacity, as well as people development.

Activities and areas of responsibility

• Lead Order Management team to ensure on-time order booking into ERP, PO issuance to vendors and spares expedition with Global Supply Chain team.
• Lead Planning team to ensure prompt Work Order scheduling, investigation on Deviation and delivery of spares.
• Collaborate with Service Operation teams to fulfill requirement from customer POs and recognize revenue.
• Work with Project team to ensure synchronized costing and revenue recognition.
• Collaborate with finance to monitor and drive actions to control deferred revenue.
• Liaise with sales team to manage Case Order closure and changes to Service Order requirement.
• Support marketing team on deployment of new offers, sourcing of products and corresponding flow system setups.
• Backup for Order Management and Planning teams
• Develop and maintain required Order Management and Planning competencies to ensure continuity.
• Drive improvement / transformation initiatives related to OM and Planning processes to ensure sustainability and support for business growth.
• Put in place relevant Management System to ensure perfect collaboration, and team collective dynamic.
• Track and implement ambitious People engagement action plan to ensure highest employee satisfaction.
• Ensure competency availability in long term within the team and anticipate competency evolution leveraging tools and processes dedicated to it
• Manage Headcount through dynamic sourcing and attrition plan to ensure appropriate work capability witin the team.
• Participate in the Short Interval Management leading actions under OM and Planners perimeter.

Key Success Factors

• Good interpersonal communication and relationship with others
• Understanding of impact of Services Representative utilization rate and work order management on Profit & Loss
• Proactive communication with Customers to ensure satisfaction.
• Requisite Technical knowledge on Schneider products.
• Capability and ability to escalate issues through the SIM cycles.

What qualifications will make you successful for this role?

• Diploma / University degree in any discipline.
• Managerial experience preferable 5 years or more in Customer Support industry.
• Good understanding on value creation within order booking, contract creation, invoicing, resource scheduling and process governance in overall impact to revenue / profitability of the company.
• Fluent in spoken and written English.
• MS Office (Excel, Word, PowerPoint).
• Proficiency in SAP / Oracle and bFO / bFS would be a plus.

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

1. Provide on-going application support and be involved in various stages of the SDLC.

2. Evaluate potential solutions and make recommendations to resolve business problems.

3. Involvement in the system integration testing phase prior to implementation.

4. Plan and coordinate end-user testing for any bug-fixes implementations.

5. Liaise closely with business users and build good rapport.

6. Liaise closely with the vendor (Avanade) that requires delivery of permanent fix due to PROD incidents.

7. Support the team in monitoring and tracking ticket's SLA.

8. Provide guidance and coaching to junior team members.

Requirements / Qualifications:

Candidate should have:

- At least 1-5 years of healthcare IT experience

- A team player and also able to work independently.

- Possess excellent verbal and written communication, analytical and conflict resolution skills with proven ability to translate complex, technical subjects into clear and concise communications to a variety of key stakeholders of different levels.

- Versatile in working independently as well as an effective team player.

-Ability to establish and manage processes and practices through collaboration and the understanding of business