Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Summary:

• General Practitioner Clinic
• Basic salary up to $2600
• Performance bonus twice a year
• Birthday Benefits, PH and OT pay available
• Other wellness benefits
• Location: Kovan / Tampines
• 5 days work week (rotating shift, able to work weekends), Timing: 8.00 - 4.00pm / 4.00 - 10.00pm
• Candidate looking for a jumpstart in healthcare industry welcome to apply!
• Career advancement: Senior PSA -> Clinic Manager -> Senior Clinic Manager
• Proper training and guidance will be provided

Key Responsibilities:

• Answer enquiries via phone call, whatsapp or email
• Liaise with patients about appointment scheduling
• Process prescription and dispense medication to patients accurately
• Assist doctors in consultation, examination and etc
• Handle financial counselling / cashiering duties
• Provide basic patient care services
• Any other ad-hoc duties assigned

Key Requirements:

• Able to commit shift works and weekends
• Knowledge of basic computer skills
• Bilingual in English and Chinese in order to communicate effectively with Mandarin speaking elderly patients

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Our client is a local bank.

Locations: Islandwide

Job scope:
Assist in banking branch duties
Crowd control and queue management
Other adhoc duties assigned

Attention to: Hailey

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret to inform you that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

Elitez Pte Ltd | EA Licence: 16C8004| Hailey YANG | Registration No: R1876431

Summary:

• Basic salary up to $4000
• AWS + Variable bonus
• 5.5 days work week @ 8.30am - 5.30pm, 9.00am - 1.00pm
• Women clinic
• Location: Orchard (3 minutes walkable from Orchard MRT station)

Key Responsibilities:

• Answer phone calls, and respond to inquiries
• Liaise with patients about appointment scheduling and patient registration
• Process insurance claims, manage payment collections and issue invoice
• Assist with simple procedures in the treatment room
• Perform inventory stock check and place order if necessary
• Provide basic patient care services
• Any other ad-hoc duties assigned

Key Requirements:

• Min 2 years of experience in specialised clinical setting
• Proficient in plato system, and medical insurance processing
• Bilingual in English and Mandarin in order to communicate effectively with Mandarin speaking patients

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Engineer position in the Department of Materials Science and Engineering at National University of Singapore (NUS).

With a strong focus on industrial projects, we are developing our exciting technologies beyond the lab scale. We are seeking a talented and experienced individual with expertise in material chemistry and chemical engineering to join us.

As a Research Engineer, you will contribute to industry project focusing on scaling up our electro-metallurgical battery recycling technology from lab to pilot scale. Your major focus will be developing a process to synthesize precursor materials (pCAM) with extracted metals from spent battery materials.

• Lead pCAM synthesis processes at the R&D and pilot scale by working in collaboration with engineering team.
• Able to establish process design and synthesis rules to obtain precursors with optimal composition, interfacial properties, crystal structure, particle size, morphology, and electrochemical characteristics.

Qualifications

1. Bachelor or Master in Materials science and engineering, Chemical engineering, Material chemistry, or any relevant field.
2. Minimum of 2 yrs experience in MHP, pCAM synthesis (precipitation, crystallization).
3. Prior experience in process development and piloting new technologies is highly preferred.
4. Experience with material characterization techniques like SEM/EDS, ICP, XRD, FTIR.
5. Strong analytical skills and experience in data analysis and interpretation.
6. Highly motivated, detail-oriented, and able to work independently as well as part of a team in a fast-paced academic environment

Role Summary

The role is responsible for delivering and managing cloud security and endpoint security services, assessing policies and rules, safeguarding SaaS applications, data and endpoints. You’ll collaborate with colleagues supporting network and architecture assessment, threat modeling, vulnerability assessment, and security operations. This position supports the Enterprise Security Transformation practice and is focused on engineering secure methods of utilizing cloud infrastructure services and software to improve the overall security posture. Cloud security engineers may instruct other teams on proper coding methods. They may also investigate, create, and recommend innovative technologies or other methods that will enhance the security of cloud-based environments.

Roles and Responsibilities

• Protects system by defining access privileges, control structures, and resources.
• Safeguards information system assets by identifying and solving potential and actual security problems.
• Recognizes problems by identifying abnormalities; reporting violations.
• Determines security violations and inefficiencies by conducting periodic audits.
• Consolidate root cause analysis of past pentest results.
• Upgrades system by implementing and maintaining security controls.
• Require periodic after-hours/weekend support.
• Any other duties assigned by the Team Lead/Solution Architect.

Job Requirements

• 3 years experience in AWS Cloud Security, Security Hub, Guard Duty, Inspector, etc.
• Strong understanding of SSDLC and security frameworks.
• Knowledge in OWASP Security Standards.
• In-depth knowledge of architecture, engineering, and operations of at least one enterprise IDS/IPS/SIEM platform.
• Hands on experience with vulnerability scanning and pentesting tools.
• Hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Experience with identity and access management architectures and solutions including AD, RBAC, SSO, identity lifecycle management.
• Experience in IAM, secrets management, encryption technologies, SaaS services hardening, Kubernetes and container security
• Experience with Linux administration, shell scripting, and open-source security tools.
• Knowledge of security best practices in hardening and protecting cloud environments, networks, servers, endpoints, applications, and databases.
• Certifications in OSCP / CISSP / SANS / Other relevant security certifications.
• Excellent interpersonal skills, team player and independent worker.
• Ability to operate in a fast-paced work environment and deliver under pressure.
• AWS certification will be an added advantage.

This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• Be part of the team to architect and bring up the new service infrastructure for autonomous prime mover (APM) business.
• Architect and develop large scale IoT system to track live operation data for fleet management to support live fleet operations and monitorings, Provide best data model and services for global route optimization, live monitoring, live map update, vehicle configuration, vehicle maintenance.
• Architect and develop other internal serivces to facilating R& D process.
• Bring up universal auth integration and best security practice.
• Provide common client SDK for backend services.

Required experience

• Bachelor’s or master's degree in computer science or related relevant field.
• 5+ years' experience in backend implementation and .
• Experience with RESTful API framework in Python, Java, or Golang.
• Experience with high performance backend implementation, profiling, and monitoring.
• Experience with data modeling with relational database and NoSQL database.
• Experience with docker, K8s or other containerization techniques.
• Experienced with cloud services.
• Experience with proper CI/CD setup.
• Excellent communication skills.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Description:

• Facilitate execution of project plans and utilise appropriate methods and tools to track and drive progress of projects against set plans and timelines
• Collaborate and communicate effectively with relevant internal and external stakeholders related to the projects
• Track both internal and external quality project deliverables against project schedules
• Perform dimensional and geometrical measurements and inspection of manufactured components for evaluation of acceptability
• Approve parts for next process & data analysis.
• Review inspection result or data in accordance with inspection and test plans.
• Collate information for product and process quality metric management reports and provide summary statement to customers.
• Assist with various stakeholder to classify issues by implementing corrective and preventive actions (CAPA) plans
• Manage Internal and External CAR analysis
• Manage Sub-con NC parts investigation
• Identify opportunities and propose improvement on QMS related process & procedures within own work area and assist with the implementation of workflow improvements to improve efficiency
• Identify, diagnose and resolve process related issues by applying failure analysis, FMEA, 8D or SPC methodology
• Update and present QA monthly performance reports to internal stakeholder.

Requirements:

• Possess at least ITE/Diploma in Engineering (Mechanical), Engineering (Precision Engineering) or equivalent.
• Familiar with manufacturing process, precision engineering and quality assurance environment.
• High mix low volume work environment
• Independent and task prioritization
• Knowledge on Microsoft office software.
• Basic knowledge on ISO 9001.
• Knowledge on mechanical drawing, GD&T.
• Knowledge in CAPA / 8D / Root cause analysis
• Able to use basic measuring instruments like caliper, micrometer & profile projector.
• Able to do OGP smart scope program independently.
• Good email communication skills.

Job Description:

• To lead, coordinate and work with cross functional teams such as tools suppliers, equipment engineers, process engineers, facility engineers, environment health and safety officer, contractors for tool placement plan.
• To participate in the evaluation, planning and supervision of projects including testing and commissioning.
• To provide support for new chemical and gas evaluations. Plan and execute specialty gas system release/unhooking up.
• To carry out overall cleanroom capacity modelling and planning, work with manufacturing, process and equipment engineering to ensure requirement is met.
• To review capacity model, understanding the constraints and re-lay the equipment layout in the cleanroom to maximise the cleanroom space usage.
• Management of contractor?s services to ensure fulfilment of contracts terms and agreements.
• Identify opportunities for innovation that are relevant and appropriate to the company business objectives
• To review capital and cashflow requirements, driving activities to improve capital efficiency and reduce cost.

Requirements:

• Degree, Diploma in Engineering (Chemical, Mechanical, Electrical/Electronic, Building Management) or equivalent.
• Degree with 3 years and Diploma with 5 years related experience in
• Manufacturing of Semiconductor, Wafer Fab.
• Able to work in fast-paced environment, proactive and able to work independently with minimum supervision, self-driven and self-motivate to get job done.
• Able to work in a manufacturing, production, cleanroom environment.
• Technical knowledge in Facilities Support System such as ACMV, HVAC, Scrubber, Electrical, Compressed Dry Air, Nitrogen, Hydrogen, Process Cooling Water, Ultra-Pure Warter, Chilled Water, Wastewater Treatment etc.
• Possess Project Management skills.
• Strong understanding of building codes, HSE laws, regulations and best practices and the ability to interpret/translate these into compliance activities
• Proficient in utilizing Excel, Power Point, Project, Word & Visio, AutoCAD.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existingdrawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform thefunction inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of ten (10) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skills:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

As a Non-Volatile Memory Quality & Reliability Assurance (NVM QRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analysis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., Product Engineering, Product Yield Enhancement) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode.
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local and MNC like SIA, CBRE, JLL, Certis, Engie, and many more!

Job Descriptions:

• Collaborate with clients to understand their needs and tailor solutions that align with their business objectives.
• Stay updated on industry trends, competitor offerings, and emerging technologies in the smart workspace domain.
• Conduct product presentations and demonstrations that showcase the features and benefits of our smart workspace solutions.

Job Requirements:

• Candidate must possess at least Bachelor's degree in Electrical, Electronics, Software, or related field.
• Excellent communication and interpersonal skills, with the ability to present to diverse audiences.
• Strategic thinker with the ability to identify market opportunities .
• Demonstrated ability to negotiate and close deals with a customer-centric approach.
• Strong organizational skills and ability to manage multiple priorities effectively.
• Self-motivated and results-oriented, with a proactive attitude toward problem-solving.

Rewards:

• Competitive salary
• Free lunch in office provided
• Free transport to/from office

Key Responsibilities:

• System Development, Implementation and Support
• Evaluate requirements and analyze impact to the application
• Involve in design and development stage
• Involve in application setup and deployment
• Provide guidance towards testing phases
• Provide level 3 production support to relevant open systems applications 
• Coordinate with internal teams and vendors to resolve application and system issues
• Execute tasks related to project / change request / maintenance request

Key Requirements:

• Degree in Computer Science or equivalent
• 5 years of UNIX/LINUX/SQL/Korn Shell programming experience
• Hands-on experience on Oracle database, Webserver such as Apache, Java platform / J2EE and Java web container such as WebLogic, JBoss EAP, Tomcat
• Relevant working experience with good working knowledge in cards, loyalty, remote commerce, portals or digital payment domains.
• A good understanding of API frameworks will also be desired.
• Ability to multi-task and perform well under pressure

- Respond to network appliances connectivity issues and resolve any issues within the confines of the office.

- Collaborate with partners and service vendors to ensure that the proxy, firewalls, and network appliances stay operational.

- Responsible for configuration and maintaining Routers, Switches, Firewalls, Proxy/Web Isolation, Load-Balancer and Security Patches for equipment.

- Troubleshoot, provide resolution and raising tickets when networking equipment face issues.

- Create, maintain, and update documentation as it relates to configuration, process, and service records.

- Monitoring security measures for the protection of computer systems, networks, and information

- Responsible for providing customer support in solving all phases of complex information security related technical problems.

- Reviews and recommends information security solutions to customer problems based on an understanding of products/systems test results.

Key Requirements

- L2: 3 to 5 years’ experience in Network Infra Setup and Operations and at least 3 to 5 full delivery cycle implementations of relevant projects

- Required to work on wee hours, weekends, and public holidays.

- Knowledge of routing, switching, firewall, proxy/web isolation and data center operation.

- Able to work well in a team environment and use tools like Visio and Wireshark.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering(PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 5-7 years of semiconductor fab experience in Chip package interaction and integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team-oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Working Location: Buona Vista

Working Time: 5 day work week, 8:45am - 5:30pm

Job Description

● Utilise 3D CAD design tools and perform high precision 3D printing (FDM

& DLP)

● Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32

to build simple circuit boards for sensor control and data acquisition

● Testing and assembly of electronics and mechanical parts and debugging

of software using basic tools like python or C++

● Familiar with maintenance of laboratory inventory and laboratory

administrative tasks (Procurement, equipment preventive

maintenance/repairs and safety matters)

● Enthusiastic, highly motivated, able to multitask, with excellent

interpersonal and communication skills.

● Administrative works, such as ordering and payment with SAP system.

Job Requirements

● Basic experience in 3D CAD design software, like Solidworks and Fusion360.

● Basic experience with microcontroller boards like Arduino, Esp32, STM32.

● Basic experience in handling simple electronics and basic hands-on soldering skills

● Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

● Diploma/Higher Nitec/ Nitec holders in Bioengineering, Biophysics, physics, mechatronics, electrical engineering, mechanical engineering, computer engineering, or any related fields.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei
EA Registered no.: R1543992
Recruit Now Singapore Pte Ltd
EA License no.: 21C0845

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As a Non-Volatile Memory Quality & Reliability Assurance (NVMQRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analyis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., PE, PYE) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems (example: GPSS) for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode for NOR * NAND product family
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Candidate with vast experience is also encouraged to apply.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

Summary:

• Basic salary up to $2600
• Performance bonus twice a year
• Birthday Benefits, PH and OT pay available
• Other wellness benefits
• Location: Kovan / Tampines (can choose location)
• 5 days work week (rotating shift, able to work weekends), Timing: 8.00 - 4.00pm / 4.00 - 10.00pm
• Candidate looking for a jumpstart in healthcare industry welcome to apply!
• Career advancement: Senior PSA -> Clinic Manager -> Senior Clinic Manager
• Proper training and guidance will be provided

Key Responsibilities:

• Answer enquiries via phone call, whatsapp or email
• Liaise with patients about appointment scheduling
• Process prescription and dispense medication to patients accurately
• Assist doctors in consultation, examination and etc
• Handle financial counselling / cashiering duties
• Provide basic patient care services
• Any other ad-hoc duties assigned

Key Requirements:

• Able to commit shift works and weekends
• Knowledge of basic computer skills

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]