Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Summary:

• Basic salary up to $4500
• Commission available (comm tier will be shared later on)
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic salary up to $4500
• Commission + Variable bonus
• Transport allowances or reimbursement
• 5 days work week @ 8.30 - 5.30pm
• Location: Tai Seng (walkable from MRT station)
• Opportunity to travel overseas
• Sales or engineering experience / background

Key Responsibilities:

• Identify and approach potential clients via cold calling, proposal emails, networking and etc
• Establish and maintain relationships with clients to foster long-term business
• Prepare quotes and proposal tailored to client's needs
• Use knowledge of products and services to recommend solutions
• Coordinate with internal departments to resolve operational issues
• Address customer concerns related to products
• Other ad hoc duties

Key Requirements:

• Min Nitec in Electrical / Electronic engineering or equivalent
• 2 year of sales / engineering experience
• Willing to travel overseas

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic & VB + $800 Flexi Dollars + $60 Mobile Allowance + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Develop and maintain the Warehouse Control System (WCS) application.
• Create REST API endpoints for internal and external stakeholder integration.
• Design, document, and implement REST APIs, including logic and database integration.
• Test and deploy REST APIs effectively.
• Build and implement internal APIs for interfacing with system components.
• Write and maintain documentation for internal API interfaces.
• Assist with software deployment, testing, and system integration at customer sites.
• Support WCS system deployment and manage integrations with additional systems.
• Perform DevOps tasks related to deployment and testing.
• Contribute to areas like orchestration, fleet management, task execution, and optimization within the software development team.

Job Requirements:

• Bachelor's or Master's degree in Computer Science, Robotics, Electrical Engineering, or a related field.
• Experience with software development for robotic systems, including navigation, perception, and control algorithms.
• Proficiency in programming languages such as Python and C++ for embedded systems development.
• Proficiency with Linux operating systems.
• Hands-on experience with ROS (Robot Operating System) and RTOS (Real-Time Operating Systems).
• Experience in designing and implementing IoT solution architectures and integrations.
• Proficiency in front-end, back-end, or full-stack development for web applications.
• Experience with hardware-software integration, particularly in sensing and actuation.
• Familiarity with system-level testing and debugging.
• Strong understanding of software optimization for performance and reliability.
• Experience with DevOps practices and tools, such as Jenkins, Docker, and Kubernetes.
• Knowledge of continuous integration and deployment pipelines.
• Experience with verification and validation (V&V) processes.
• Strong technical writing skills for creating comprehensive documentation, including user and service manuals.
• Ability to interact effectively with field engineers and customer service representatives to provide technical support and troubleshooting

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

Job description:

As the RFFE Module design team leader, the candidate plays key design role in development and commercialization of MEMS Based RF-FE module for consumer electronics from new concept design, verification to mass production.

Candidates will designs develop, modifies, and evaluates electronic parts, components, or integrated circuitry for electronic equipment and other hardware systems on a multinational team basis.

Responsibilities:

- Co-working with international team including China and Singapore on a cross-disciplinary team basis

- Design and development of RF-FE modules to meet customer’s specification and needs

- Lead and produce 4G, 5G, WiFi module design, fulfil product lifecycle from engineering and transfer to production team

- Coordinate with engineering teams globally to produce module samples

Qualifications/Desired skills:

- Track record in commercialization of RF-FE modules.

- Broad understanding of RF analog component performance characterization via Smith Chart, tuning via passives, etc

- Extremely familiar with module application in RF application and have the ability to use advanced modelling techniques to design modules

- Strong skill in EM modelling and RF simulation tools Solid background in resonator/filter design, simulation, finite element analysis, layout, and package design

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Summary:

• General Practitioner Clinic
• Basic salary up to $2600
• Performance bonus twice a year
• Birthday Benefits, PH and OT pay available
• Other wellness benefits
• Location: Kovan / Tampines
• 5 days work week (rotating shift, able to work weekends), Timing: 8.00 - 4.00pm / 4.00 - 10.00pm
• Candidate looking for a jumpstart in healthcare industry welcome to apply!
• Career advancement: Senior PSA -> Clinic Manager -> Senior Clinic Manager
• Proper training and guidance will be provided

Key Responsibilities:

• Answer enquiries via phone call, whatsapp or email
• Liaise with patients about appointment scheduling
• Process prescription and dispense medication to patients accurately
• Assist doctors in consultation, examination and etc
• Handle financial counselling / cashiering duties
• Provide basic patient care services
• Any other ad-hoc duties assigned

Key Requirements:

• Able to commit shift works and weekends
• Knowledge of basic computer skills
• Bilingual in English and Chinese in order to communicate effectively with Mandarin speaking elderly patients

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic salary up to $4000
• AWS + Variable bonus
• 5.5 days work week @ 8.30am - 5.30pm, 9.00am - 1.00pm
• Women clinic
• Location: Orchard (3 minutes walkable from Orchard MRT station)

Key Responsibilities:

• Answer phone calls, and respond to inquiries
• Liaise with patients about appointment scheduling and patient registration
• Process insurance claims, manage payment collections and issue invoice
• Assist with simple procedures in the treatment room
• Perform inventory stock check and place order if necessary
• Provide basic patient care services
• Any other ad-hoc duties assigned

Key Requirements:

• Min 2 years of experience in specialised clinical setting
• Proficient in plato system, and medical insurance processing
• Bilingual in English and Mandarin in order to communicate effectively with Mandarin speaking patients

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Summary:

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existingdrawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform thefunction inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of ten (10) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skills:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

As a Non-Volatile Memory Quality & Reliability Assurance (NVM QRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analysis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., Product Engineering, Product Yield Enhancement) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode.
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local and MNC like SIA, CBRE, JLL, Certis, Engie, and many more!

Job Descriptions:

• Collaborate with clients to understand their needs and tailor solutions that align with their business objectives.
• Stay updated on industry trends, competitor offerings, and emerging technologies in the smart workspace domain.
• Conduct product presentations and demonstrations that showcase the features and benefits of our smart workspace solutions.

Job Requirements:

• Candidate must possess at least Bachelor's degree in Electrical, Electronics, Software, or related field.
• Excellent communication and interpersonal skills, with the ability to present to diverse audiences.
• Strategic thinker with the ability to identify market opportunities .
• Demonstrated ability to negotiate and close deals with a customer-centric approach.
• Strong organizational skills and ability to manage multiple priorities effectively.
• Self-motivated and results-oriented, with a proactive attitude toward problem-solving.

Rewards:

• Competitive salary
• Free lunch in office provided
• Free transport to/from office

- Respond to network appliances connectivity issues and resolve any issues within the confines of the office.

- Collaborate with partners and service vendors to ensure that the proxy, firewalls, and network appliances stay operational.

- Responsible for configuration and maintaining Routers, Switches, Firewalls, Proxy/Web Isolation, Load-Balancer and Security Patches for equipment.

- Troubleshoot, provide resolution and raising tickets when networking equipment face issues.

- Create, maintain, and update documentation as it relates to configuration, process, and service records.

- Monitoring security measures for the protection of computer systems, networks, and information

- Responsible for providing customer support in solving all phases of complex information security related technical problems.

- Reviews and recommends information security solutions to customer problems based on an understanding of products/systems test results.

Key Requirements

- L2: 3 to 5 years’ experience in Network Infra Setup and Operations and at least 3 to 5 full delivery cycle implementations of relevant projects

- Required to work on wee hours, weekends, and public holidays.

- Knowledge of routing, switching, firewall, proxy/web isolation and data center operation.

- Able to work well in a team environment and use tools like Visio and Wireshark.

Key Responsibilities:

• System Development, Implementation and Support
• Evaluate requirements and analyze impact to the application
• Involve in design and development stage
• Involve in application setup and deployment
• Provide guidance towards testing phases
• Provide level 3 production support to relevant open systems applications 
• Coordinate with internal teams and vendors to resolve application and system issues
• Execute tasks related to project / change request / maintenance request

Key Requirements:

• Degree in Computer Science or equivalent
• 5 years of UNIX/LINUX/SQL/Korn Shell programming experience
• Hands-on experience on Oracle database, Webserver such as Apache, Java platform / J2EE and Java web container such as WebLogic, JBoss EAP, Tomcat
• Relevant working experience with good working knowledge in cards, loyalty, remote commerce, portals or digital payment domains.
• A good understanding of API frameworks will also be desired.
• Ability to multi-task and perform well under pressure

Hardware Engineer

Responsibilities:

• Develop of real time embedded systems
• Able to execute development project independently throughout the development implementation and manufacturing process
• Perform debugging, testing and improvement of current products
• Provide in-house/on-site technical support, documentation and technical training

Requirement:

• Degree in Embedded system/Electronics/Electric or equivalent
• Experience in Electronic hardware design inclding circuit analysis, IO interface to microprocessor and component selection for the performance enhancement on current and new product
• Experience in PCB schematics and artwork layout is highly preferred
• Experience in C and Assembly language programming

Main Responsibilities / Critical tasks

• Responsible to assist in the design of controls system and programming coding to meet the budget and time expectations as defined by Project Manager
• Able to Modify controls design and other documents according to the Mikron Processes & Standards and compliance to industry standards as according to customer URS.
• Develop specific program per customer and project requirements based on Mikron Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly

Skills and knowledge requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent; or at least 5 years related experience and/or training; or equivalent combination of education and experience.
• Minimum 3 years of related work experience.
• Must be able to travel as requested
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Knowledge in Allen Bradley and Siemens-S7 programming.
• Computer skills including intermediate to advanced Microsoft Office Tools (Outlook, Word, PowerPoint) and Excel spreadsheet experience; Microsoft Project; Design software; Internet software; Manufacturing software and SQL/Dbase Database software.

Key Responsibilities:

• Formulation Support: Collaborate with the R&D team to develop and scale up cosmetic and skincare formulations, ensuring consistency and performance.
• Process Optimization: Design, implement, and optimize chemical processes to improve production efficiency, reduce costs, and enhance product quality.
• Quality Control: Monitor production processes to ensure that products are produced according to specifications, comply with regulatory standards, and maintain high-quality standards.
• Troubleshooting: Diagnose and resolve process-related issues, ensuring minimal downtime and maintaining production schedules.
• Sustainability Initiatives: Identify and implement sustainable practices in the manufacturing process, including waste reduction, energy efficiency, and greener chemical alternatives.
• Compliance: Ensure compliance with safety standards, environmental regulations, and industry best practices (e.g., GMP, ISO).
• Cross-Department Collaboration: Work closely with the quality assurance, production, and supply chain teams to ensure smooth operations and continuous improvement.

Requirements:

• Experience: At least 1-2 years of experience in a chemical engineering role, preferably within the cosmetics, skincare, or personal care industry.
• Skills:Strong understanding of chemical processes and formulation techniques in the cosmetic/skincare industry.
  Proficiency in process modeling, data analysis, and process optimization.
  Familiarity with industry regulations and quality standards (GMP, FDA, etc.).
  Excellent problem-solving and troubleshooting skills.
  Ability to work in a fast-paced, collaborative environment.
  Strong communication and documentation skills.
  
• Desirable: Experience with sustainability practices in manufacturing, knowledge of new trends and innovations in cosmetics/skincare formulations.

As a Non-Volatile Memory Quality & Reliability Assurance (NVMQRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analyis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., PE, PYE) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems (example: GPSS) for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode for NOR * NAND product family
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering(PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 5-7 years of semiconductor fab experience in Chip package interaction and integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team-oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Working Location: Buona Vista

Working Time: 5 day work week, 8:45am - 5:30pm

Job Description

● Utilise 3D CAD design tools and perform high precision 3D printing (FDM

& DLP)

● Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32

to build simple circuit boards for sensor control and data acquisition

● Testing and assembly of electronics and mechanical parts and debugging

of software using basic tools like python or C++

● Familiar with maintenance of laboratory inventory and laboratory

administrative tasks (Procurement, equipment preventive

maintenance/repairs and safety matters)

● Enthusiastic, highly motivated, able to multitask, with excellent

interpersonal and communication skills.

● Administrative works, such as ordering and payment with SAP system.

Job Requirements

● Basic experience in 3D CAD design software, like Solidworks and Fusion360.

● Basic experience with microcontroller boards like Arduino, Esp32, STM32.

● Basic experience in handling simple electronics and basic hands-on soldering skills

● Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

● Diploma/Higher Nitec/ Nitec holders in Bioengineering, Biophysics, physics, mechatronics, electrical engineering, mechanical engineering, computer engineering, or any related fields.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei
EA Registered no.: R1543992
Recruit Now Singapore Pte Ltd
EA License no.: 21C0845

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.