JOB DESCRIPTION

Commissioning and Trouble-shooting to the all kind of air- con system,(A.C.C.U, A.H.U, F.C.U, SPLI type , WINDOW type , PACKAGE type , AND CHILLER type) check the Electrical wiring diagram to the system.

Overhauling all kind of Compressor to the refrigeration system(Carrier (5f/5h series), Daikin(c55/c58/c74/c75 series),Sabroe(cmo 20, 30 /smc 100/bf series), Bock(f-series), York( ms/mrseries), Carlyle (06ea/06ed series), Bitzer.

Mitsubishi (MS/O6B Series) open type and semi-hermetic type).

Split type air condition installation and troubleshooting.

Package type air condition installation and trouble shooting.

Re-fabricate and modify the piping to the Condenser by brazing method.

Re-fabricate and modify the piping to the Evaporator coil & steam coil by brazing.

Retro-fittings to the refrigeration system as per Environmental free zone Freon gas.

Service report maintains, & Attendant customer feed-back.

JOB REQUIRMENT

Minimum Degree or diploma in Relevant Engineering.

Minimum 10 years of experience on the relevant field.

Must have good communication knowledge.

Must have pervious Singapore experience.

Must able to work in any shift or any timing slot.

As an Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• > 2 years of experience in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals in the semiconductor industry
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations

Keen on the role? Apply now!

Job Description:

• Serve a full range of products from our beverages to delicious food.
• Introduce suitable or recommended drinks to customer according to standards.
• Handle cash transactions honestly, efficiently, and accurately.
• Manage goods' inventory and stock take.
• Maintain shop cleanliness.
• Preparation on ingredients daily.
• Serving customers with a friendly and polite attitude.
• Able to commence work in short notice will be an added advantage.

Job Requirement:

• On job training provided
• Excellent and positive service attitude
• Independent and able to multi-task
• Be able to Speak Mandarine in order to serve Chinese speaking customers.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Tender Engineer (Power System) to make an impact!

This position is accountable for preparing a response to the Request for proposal/Quotation on moderate size and complex Customer’s opportunity, from start to finish, so that the response offered the best Value Proposition. This includes reviewing the RFP/RFQ, determining the scope of works and tasks, determine the best product/equipment/software/services offers, liaising with factories and vendors, challenging the factories and vendors’ offer, costing and determining the market price level, working with various internal stakeholders, i.e. opportunity leader, business leader, project management, engineering, solution purchaser, legal, contract management, solution risk management, analyze risk and opportunities etc. To prepare/revise the offer till the closure of the opportunity, attend and support bid clarification with the opportunity leader, organized Contract Review as well as hand-over package to the project management team. This position is expected to be self-driven, taking ownership and initiative to complete the require task within the timeframe agreed with the Opportunity Leader.

What you will do:

• Take ownership of the tender process and drive the submission of the Offer
• Analyze request for proposals (RFP)/ request for quotation (RFQ) from Customer and determining the scope of works and tasks
• Liaise with factory personnel in preparing proposal packages and advising on technical matters to prospective clients / consultants
• Ensure and comply to company tendering process
• Build techno-commercial proposals by using standard tools and processes and integrating validated data provided by technical and commercial support functions.
• Prepare costing as per requirements and complete submission of Offer within deadline.
• Understand risk analysis and apply into the offer.
• Ensure compliance of Solution Risk Policy and coordinate for approval
• Conduct contract review with the required stakeholders to ensure contract alignment.
• Prepare and handover of opportunity to Execution & Project Team

What qualifications will make you successful for this role?

• Degree/Diploma in Electrical/Power Engineering
• At least 2 years of relevant experience in Tendering process and good experience and strong knowledge in Electrical Distribution equipment, systems and solutions especially Medium Voltage Switchgear
• Knowledge of Electrical industry, EPC and customers’ base in various segments such as Oil & Gas, Utilities, Commercial Buildings and other segments
• Adaptability and Teamwork oriented mindset
• Customer focused mindset and fluent in English language.
• Good communication skills and previous Commercial or Project Management experience would be an advantage.

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

We are looking for a reliable Office Admin Executive, this role will handling daily administrative duties, ensuring the office and the staff have adequate support to work efficiently.

Responsibilities

· Adjust schedules based on site conditions and propose changes for variances.

· Handle general administrative work and ad hoc duties

· Manage all work pass applications eg WP, SP, EP

· Arrange for courses eg CSOC, work-at-height, confinement space

· Managing daily routine operations such as handling phone calls & email correspondence.

· Handle enquiries on all customer service-related issue

· Ability to handle multiple tasks and prioritize effectively

· Attention to detail and accuracy in documentation

Others:

• Good team player
• Able to handle documents professionally and confidentially
• Produces meticulous and systematic work quality
• Able to manage stress of concurrent submissions

Qualifications:

· At least GCE ‘N’ Level or equivalent.

· Basic knowledge of Microsoft Office (Word, Excel, PowerPoint).

· Strong attention to detail and accuracy.

· Good organizational and time management skills.

· Ability to work independently and manage tasks efficiently.

· Expected salary: $2,500 - $3,000 per month

Working Hours:

• Monday to Friday 8.00am to 5.00pm (Including of 1 hour of lunch break)

We regret to inform that only Malaysians/SPRs will be shortlisted for consideration.

For further enquiries or submission, you may reach out to Irene (HR Executive) at [email protected]

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

Job Description:

• Research, design, and develop computer and network software or specialised utility programs.
• Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.
• Collaborate with the team to create technical designs for frontend architectures using React and React Native.
• Develop and maintain frontend components and features for our main products.
• Participate in the development of management platforms related to marketing activities.
• Optimize frontend performance and implement server-side rendering techniques.
• Contribute to the improvement of development processes and coding standards.
• Stay up to date with the latest frontend technologies and best practices.\

Requirements:

• Bachelor's in Computer Science, Engineering or a related field
• Minimum 5 years of experience in Frontend Engineering.
• Experience in React or React Native.
• Experience with frontend performance optimization and server-side rendering.
• Familiarity with build tools like Webpack and Vite.
• Knowledge of Node.js and CSS.
• Excellent problem-solving and debugging skills.
• Strong attention to detail and ability to deliver high-quality code.
• Good communication and collaboration skills.
• Passion for staying up to date with the latest frontend technologies and trends.

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.

Position Summary:

The Network Engineer supports and maintains infrastructure operations, monitors infrastructure performance and resolution of technical problems. Manage firewalls, network access control and F5 Load balancers.

Manage the firewalls (fortigate), network access control (CPPM) and F5 load balancers

Role and Responsibilities

Roles & Responsibilities:

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure

• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimization of infrastructure hardware and software components such as updates and upgrades

• Participate in infrastructure development activities

• Assist with infrastructure testing and implementation

• Gather performance and data usage statistics for capacity planning and reporting

• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution

• Assist with simulation of user problems to resolve operating difficulties

• Follow up with users to ensure problem has been resolved

• Recommend system modifications to reduce user problems

Requirements / Qualifications

- Degree in Computer Engineering or equivalent

- Minimum 3 years of Experience in Network Support

- CCNA / CCNP certification preferred

- Knowledgeable in Firewall, NAC and F5 Load Balancers

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Your main responsibilities include:

• Develop and maintain product datasheet testing and characterization test programs for NAND and NOR components
• Working with product reliability engineers to define test flows for individual products
• Provide support to operation team to ensure seamless execution for generated test flow on the tester with live product
• Perform electrical failure analysis for failure validation and characterization

You are encouraged to apply if you can demonstrate some of the qualities listed below:

• Master's or Bachelor's degree in Engineering field. Microelectronic/Electrical/Computer Engineering fields are preferred.
• Positive attitude and self-motivation towards learning and development.
• Good analytical mindset and structured personality.
• Good written and verbal communication skills.
• Hands on experience with C++/Python and Object-Oriented Programming is a plus
• Understanding Automated Test Equipment and flash memory is a plus.
• Fresh graduates are welcome to apply.

Working location:

• 990 Bendemeer Road, Singapore 339942

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

About Us:

We develop comprehensive software products and solutions ranging from IT consultancy to infrastructure and hardware setup to optimise customers' experiences. To establish ourselves as a leading provider of applications and healthcare support services for the Asian market, and partner healthcare customers to build a safe medical environment for all.

We are driven by our group philosophy as defined below:

1. Provide the best to our customers through a service-oriented culture

2. Create new value through innovation

3. Realise greater possibilities through advanced technology

Roles and Responsibilities:

• Responsible for providing technical assistance and support related to computer systems, hardware or software testing
• Responds to queries, runs diagnostic programs, isolates problem, and determines and implements solution
• Provide technical assistance and support for incoming queries and issues related to computer, systems, software, and hardware
• Respond to queries either in person or over the phone
• Write training manuals
• Maintain daily performance of computer systems
• Respond to email messages for customers seeking help
• Ask questions to determine nature of problem
• Walk customer through problem-solving process
• Install, modify, and repair computer hardware and software
• Run diagnostic programs to resolve problems
• Are required to apply information security in accordance with the established policies and procedures of the organization.

Requirements:

• Diploma or Certificate in IT/Computer Engineering with 1-2 years of working experience in technical support
• Experience in basic networking support
• Experience in supporting OS platforms such as Windows 10 and MS Office applications
• Prefer candidates who are resourceful, good working attitude & takes initiative
• Good communication skills and administrative skills

Responsibilities:

1、Responsible for the research and development of algorithms for wireless IC such as baseband algorithm, positioning algorithm, bioradar algorithm, and motor control algorithm.

2、Complete design documents, support hardware development, participate in testing, analyze and solve various problems encountered in actual development.

Requirements:

1. Majors in signal processing, microelectronics, communication, computer, control, automation, applied mathematics, etc.

2. Master's degree or above.

3. Experience in wireless IC design is a plus.

4. Good English skills, communication skills, and willingness to work with a global team;

5. Good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment.

6. Fresh MS graduates are welcome.

Position Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualification/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Experience with automation tools: Ansible, Python
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.
• 2 years contract

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

JOB SCOPES & JOB RESPONSIBILITIES

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programme.
• Liaise with Professional Engineer on civil related works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handling of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.
• Good attitude and relevant working experience.

JOB REQUIREMENTS

• Recognised Certificate in Civil Engineering.
• Minimum 5 Years experience in the construction site.
• Independent with good communication skills.
• Good organizational and planning skills.
• Effective communication and coordination skills and teamwork.
• Able to work independently and in a team.

Responsibilities:

• Install, configure, troubleshoot and support servers or virtual machines (Hyper-V / VMware) running on Windows Server operating systems.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Monitoring and implementing backup solutions for critical systems and data regularly.
• Implement and maintain IT security measures and best practices for systems and address security incidents with latest security trends.
• Assist in the planning and implementation of IT projects, ranging from system upgrades to new system deployments.
• Create and update technical documentation pertaining to systems administration for on-premise systems, Azure and Microsoft 365.
• Any related ad-hoc duties as assigned.

Requirement:

• Minimum 3 years of experience as a System Engineer or Server Administrator.
• Experience with Active Directory, Group Policy, Virtualization, Patch Management, Microsoft Entra and Microsoft 365.
• Experience in cloud platforms such as Azure and AWS.
• Possess excellent communication, problem-solving and analytical skills.
• Ability to work independently.

Job Summary:

The Applications Support Engineer provides technical support and maintenance for software applications, ensuring their optimal performance and availability. This role involves troubleshooting issues, implementing solutions, and collaborating with other IT teams to enhance system functionality. The Applications Support Engineer is also responsible for documenting processes, managing application configurations, and assisting in the deployment of software updates and patches.

Key Responsibilities:

• Application Support: diagnose and troubleshoot application issues reported by end-users or detected through monitoring tools. Provide timely and effective resolution to application problems, escalating issues when necessary.
  
• Incident and Problem Management: manage and resolve application-related incidents and problems, ensuring root causes are identified and addressed. Maintain an incident log and provide regular updates to stakeholders on the status of issues.
  
• Application Maintenance and Updates: work with development teams to deploy new versions and patches of applications and implement changes. Test and validate updates before deployment to ensure minimal disruption to users.
  
• User Support and Training: assist end-users with application-related queries and provide technical support. Conduct training sessions for users on new features or changes to applications. Develop user guides and support documentation to assist end-users.
  
• Configuration Management: manage application configurations, including settings, permissions, and access controls. Ensure that application configurations are documented and maintained in line with organizational standards.
  
• Collaboration and Communication: work closely with developers, system administrators, and other IT teams to resolve application issues. Communicate effectively with stakeholders, providing regular updates on application status and issues. Participate in project meetings to provide input on application support requirements.
  
• Continuous Improvement: identify areas for improvement in application performance and user experience. Propose and implement solutions to enhance application efficiency and reliability.
  

Requirements:

• Degree in Computer Science, Information Technology, or related field.
• Preferably 2 to 5 years of experience in application support, software troubleshooting, or a related role.
• Beneficial to have experience in an Aircraft Engine Maintenance Repair and Overhaul shop.
• Good knowledge of MS Excel, databases, SQL, and scripting languages (e.g., Python, PowerShell).
• Strong problem-solving and analytical skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong customer service orientation.
• Training provided for candidate without prior experience.

Summary:

• Salary structure: Basic salary + OT pay
• Basic salary up to $2500 + OT up to $1500
• 5 days work week
• Normal office hours @ 8.30 - 5.30pm
• Location: Islandwide
• Company vehicle will be provided for travelling purposes
• Locks, automatic, and security doors

Key Responsibilities:

• Carry out schedule and retrofits automatic door parts
• Troubleshoot and conduct site check on the automatic entrance and propose recommendations
• Provide site report to client for the purpose of completion of works
• Perform testing and commissioning
• Decommissioning and conduct risk assessment of all products
• Keep updated on product information for both company's and competitor's products
• Other relevant ad-hoc duties assigned by the manager

Key Requirements:

• Class 3 driving license is a must
• Must have at least some door automation related working experiences

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Benefits

1. Location: Work at Changi, East Region
2. Career Growth: Gain valuable experience in air freight, with opportunities to develop your skills in customer service and logistics.
3. Team Spirit: Join a supportive and dynamic team where collaboration and learning are encouraged.
4. Work-Life: Enjoy alternate Saturdays off after confirmation and 14 days of annual leave to recharge.
5. No Experience Needed: Fresh faces are welcome! Comprehensive training provided for those eager to learn and grow.

Job Description

Are you ready to embark on an exciting career in air freight? We are seeking enthusiastic and organized individuals to join our team as Air Export Customer Service Representatives. You’ll play a crucial role in managing our clients' air export needs, providing exceptional service, and coordinating with our operations team to ensure smooth shipment arrangements. This is your opportunity to thrive in a fast-paced, global logistics environment.

Roles & Responsibilities

• Support assigned customers and overseas agents by managing sales quotations, RFIs, RFQs, and inquiries.
• Book air export shipments with airlines and co-loader agents, ensuring timely follow-ups.
• Handle air export billing, invoice verification, and resolve rate disputes efficiently.
• Coordinate with clients, sales teams, overseas agents, and operations staff to ensure successful shipment arrangements.
• Perform additional duties as requested to support team goals.

Requirements

• Skills: Proficiency in MS Office (Word, Excel, PowerPoint) and data entry. Excellent command of English and Mandarin to liaise with Mandarin-speaking associates.
• Experience: Experience in air freight is a bonus, but not required. We welcome fresh candidates willing to learn.
• Attributes: Team player with a proactive attitude. Strong organizational skills and the ability to handle inquiries efficiently. Willingness to work overtime if necessary.

Additional Information

• Location: No. 9, Airlines Road, #02-16 & #02-17, Cargo Agents Building ‘D’, Changi Airfreight Centre, Singapore 819827.
• Working Hours: Monday to Friday, 9 am – 6 pm. Saturday, 9 am – 1 pm (alternate Saturdays off upon confirmation).
• Leave: 14 days of annual leave after confirmation.