Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Responsible to lead project in ship automation related equipment design, platform equipment integration and its interface with the Ship Management System (SMS), and to platform system equipment related control and monitoring logic, which includes basic and detail design :

o SMS architecture

o Generate I/O list

o Integration of third party equipment / system with SMS

o Control console design and control panel arrangement

o Control room arrangement layout

o Platform system automation design, system control and monitoring

• Responsible for function requirement design, safety and surveillance related systems, such as:

o Propulsion control system (PCS), Power management System (PMS) function specification

o Dynamic positioning system

o CCTV system, Fire Detection System

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electronics and Automation systems

• Knowledge in computer networking, control instrumentation and control system design

• Knowledge of standard communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NEMA, CANbus, J1939

• Knowledge in Autocad, Naviswork, AVEVA Marine 3D software

Requirements:

• Degree in Electrical, Automation, Mechatronic or any related engineering field

• Has 6 years working experience in Automation or Marine/offshore Industry

• Good Interpersonal Skills, problem solving skills and is a team player.

• Good time management and able to meet tight deadlines

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilties

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

How to Apply:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to diana.pang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Project: HDB at Yishun (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 3 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Join Our Friendly Team!

STOREFRIENDLY is one of Singapore's leading provider of self-storage solutions and the only provider in Singapore that has incorporated the usage of robotic self-storage technology. Our clients are mainly businesses and individuals who require clean, safe, climate-controlled and 24/7 access self-storage.

The Group expanded rapidly since its inception in 2019 and now has branches in Paya Lebar, Ubi, Bedok, Bukit Merah, Leng Kee and Clementi. To complement its suite of self-storage solutions, the Group also added moving services, wine self-storage and co-working spaces to our product offerings for customers.

The Group recently acquired its 5th building, Storefriendly Jurong East and is now recruiting more motivated, dynamic and friendly individuals to join the Team to support its expansion initiatives:

CUSTOMER SERVICE OFFICER

Highlights

• NO SHIFT - 5.25 days week - suitable for candidates with family or study commitments.
• Attractive basic salary, allowances and annual bonus
• Good peformance incentives over and above monthly salary.
• Company will consider posting to most convenient branch for candidate.
• Company structure facilitates career progression and job specialisation.

The Job

• Helping customers on-site to select suitable storage units, service and/or merchandise
• Process rental / renewal agreements, collect payment and maintain timely and accurate records
• Help customers to resolve requests or issues with their storage
• Check, report and follow-up on any maintenance issues required in the branch you are in-charge of.
• Prepare and submit reports as required

At Storefriendly, we believe that customer service is our top priority. We want our customers to feel like they're getting the best possible service. That's why we're looking for :

The Candidate

• Friendly and is good at finding solutions
• Patient and understanding
• Able to communicate with people from all walks of life
• Able to work independently and as part of a team

It will be advantageous if you also have at least 1 year working experience, especially if in sales/customer service and can start work immediately.

If you're a people person who loves helping others, then we want to hear from you! Write in now and tell us about yourself, expected salary and earliest availability.

Customer Service Coordinator

SGD $2500 - $4500

Alternate 5.5 Days/week

Job Description

• Handles customer inquiries via phone or email
• Supports customers in providing quotations and follow up on the inquiry
• Create Job order and update on amendments accordingly
• Provides post-sales support and day-to-day business liaison with customers
• Ad hoc duties assigned

Requirements

• Certificates or qualifications equivalent to Diploma Education
• Minimum of 5 years of related working experience preferred
• Proficient in written and spoken English / Chinese
• Good related customer service/sales coordination experience
• Able to multi-task and work with minimal supervision

Main responsabilités :

● To deliver or collect machines for after sale and hire fleet customers.

● Performance of repairs, servicing, preventive maintenance program and quotation job on site.

● Conduct Training for Operators on the correct method of operation and daily check maintenance of the new and hired fleet machine on site.

● Assist PE inspection for sale and hire machine fleet on site.

● Any other technical related aspects as and when required.

● Responsibility for complete customer satisfaction within the work area. Assists in planning, communicating, and coordinating support plans with customers.

● Complies with all safety procedures and consistently demonstrates safety as a value.

● General service report writing for internal and external customers.

● Ensure the excellence of services by strictly adhering to company standards and policies

● Thoroughly follow up on all open technical issues until the problems are fully resolved

● To travel and carry out machine troubleshooting, repair work or rectification and servicing jobs onsite.

● Write and submit service reports to customers based on the job done.

● Work as a team to maintain and expand customer base.

● Collaborate with the team to manage and schedule service calls effectively.

● To record and submit all service data and reports as and when required

● To provide accurate, factual reports to the team leader or technical support personnel to enable informed decisions to be made on a course of action to resolve product issues.

● To carry out machine diagnostic using special diagnostic tools such as,

-Manipad Diagnostic Tool

-I.V Special Tools

-Boom Lift / Scissors Lift Diagnostic Calibrator Tool

● To utilize Manitou, Genie, JLG & Skyjack diagnostic tools

EDUCATION:

• Higher Nitec in Mechanical or Automotive.
• Diploma in Mechanical or Automotive.

EXPERIENCE:

• Minimum of 2-3 years of field service support.
• Ability to work independently.
• Mechanical, Electrical and Hydraulic System troubleshooting skill.
• Experience working with a wide range of brands and models in the aerial equipment industry.
• Familiarity with diagnostic tools and software
• Proven experience in servicing boom lifts, scissor lifts, and other aerial work platforms.
• Ability to read and interpret schematics, technical drawings, and service manuals.
• Excellent communication skills and a customer-focused attitude.

Requirement:

• Valid driving license (mandatory).

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:

• Coordinate and process administrative activities for customer service parts ordering.
• Supporting MA group internal, ASEAN, US, EU, and Global market needs.
• Liase with vendors and MA SCM for parts ordering and fulfilment.
• Liase with internal customer engineers for parts number, drawing, and technical aspect of requirement.

Responsibilities:

• To achieve SPC part sales goals in order to fulfil business needs and support company growth.
• Familiar with the roles and responsibilities of customer service coordinator roles for order desk.
• Adhere strictly to job process defined by Makino's QEHS policy to achieve to Makino quality standards.
• Enhancement of spare parts from quotation to ordering and shipment in terms of price, response and lead time.
• Assist in spare parts pricing management and to provide weekly / monthly quotation, purchasing, sales and shipment report.
• Perform accurate update of parts in / out of system and to ensure safety stock availability.
• Filing and documentation of all spare parts sales related in terms of ISO management.
• Co-ordinating with Finance in terms of payment, shipment and PGI related.
• Share knowledge with relevant people to help create a knowledge bank and learning organization.
• Mentoring and guide junior service coordinators.

Requirements:

• Diploma / Degree in Business Admin, Supply Chain Management or equivalent
• Minimum 3 years of working experience with data entry, order processing related skills.
• Proficient in computer literate and administrative skills.
• Familiar working experience with Freight Forwarding Procedure and concept.
• Fast learner and agile, able to adapt to dynamic work environment.
• Able to work independently and self-motivated.
• SAP system knowledge will be considered for top priority.
• Able to understand technical drawing and specification will be added advantage
• Able to work in a fast paced and challenging environment.
• Fluent in English and knowledge of Chinese will be an added advantage.
• Good and effective communication skills.

Job Description

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).

Collaborate with cross-functional teams to identify and resolve production issues.

Perform root cause analysis and provide solutions to prevent future issues.

Create and maintain documentation related to production issues and resolutions via JIRA.

Implement and maintain processes and procedures to improve production support.

Provide daily, weekly, and monthly reports on system performance and issue status.

Ensure proper deployment and release of software updates & infrastructure patches/upgrades.

Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.

Deployments during silent hours.

Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

Bachelor’s degree in Computer Science or related field.

2–4 years of experience in Production Support or related role.

Strong technical skills in Java, SQL, UNIX, and scripting languages.

Ability to troubleshoot and resolve complex production issues efficiently.

Excellent problem-solving and analytical skills.

Effective communication skills to collaborate with cross-functional teams effectively.

Willingness to participate in on-call rotation.

Project: HDB at Geylang (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 5 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Responsibilities:

• Work as part of the hull maintenance team ensuring timely delivery of vessel
• Manage and execute planned and corrective maintenance activities
• Supervise and guide workers in maintenance tasks
• Coordinate with customer, suppliers, contractors when required
• Perform basic administrative works (MS words and excel)
• Any tasks as directed by Department Head.

Requirements:

• NTC or Diploma in Mechanical or Marine Engineering or related
• Those with no prior experience will be provided with training (Classroom and on the job)
• Possess understanding of how to read 2D engineering drawings
• Able to work long hours or overtime due to exigencies of work
• Willing to work under hot, dusty, and greasy environment.
• Willing to learn with a positive mindset.
• Willing to work in Changi area.
• Only Singapore Citizens need apply

Other Information:

• Location: Changi
• Company Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5-day work week
• Working Hours: 7.45am-5pm

Customer Service Coordinator

Alternate 5.5 Days/week

Job Description

• Handles customer inquiries via phone or email
• Supports customers in providing quotations and follow up on the inquiry
• Create Job order and update on amendments accordingly
• Provides post-sales support and day-to-day business liaison with customers
• Ad hoc duties assigned

Requirements

• Certificates or qualifications equivalent to Secondary Education
• Minimum of 2 years of related working experience preferred
• Proficient in written and spoken English
• Good related customer service/sales coordination experience
• Able to multi-task and work with minimal supervision

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

A Day in Your Life at MKS:

As an Application Engineer , you will partner with Sales and Customers to support FEC process activities and improvement.

You Will Make an Impact By:

• Perform characterization study on new products and document the results in customer presentations for marketing purposes
• Presentation of products capability and performance to management and customers
• Provide on-site new process installations (Beta Site Evaluation) at customers for new products de-veloped
• Provide training to customers and applicators
• Support Functional Electronic Coatings (FEC) business in the Far East by processing samples for customers, evaluations/qualifications and conducting lab scale experiments to troubleshoot cus-tomer problems
• Responsible to ensure the FEC Laboratory cleanliness and maintenance through practicing good housekeeping methods.
• Ensure work time is recorded and uploaded into the SAP platform for all projects completed and in-hand.
• Health, Safety & Environment (HSE) Responsibilities: Safety remains our number 1 priority. Making HSE as an integral part of all activities. The successful candidate must agree to comply with our in-ternal HSE & QS policy and other relevant local regulations.
• Other jobs / tasks assigned by the Application Manager and Business Manager
• Travel Requirements : 30% of travel is required

Skills You Bring:

• Degree in Chemistry or equivalent. Masters or PHD in chemistry can be considered.
• Minimum of 3 years working experience in the related function /industry.
• Good knowledge of electrochemistry and surface finishing technology
• Good command in English.
• Good communication and interpersonal skills.
• Candidate should be proactive, highly motivated, goal-oriented and customer-oriented person
• Good communication skills, resilience, good reporting
• Excellent analytical thinking, able to work under minimum supervision and independently, at the same time a highly committed team player.

Job Responsibilities:

1. Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
2. Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability. Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
3. Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently, ensuring analytical tools are in proper working condition for accurate testing and analysis.
4. Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products, offering product expertise, providing technical support for new product developments, and addressing technical emergencies.
5. Collaborate with other departments on continuous improvement projects to achieve business objectives.
6. Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
7. Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
8. As quality master to understand product quality, to ensure product to fulfill customer’s requirement.

Job Requirements:

1. Master's Degree in Chemistry with 2 – 3 years relevant working experience in QC lab or a Bachelor’s Degree in Chemistry with 5 – 6 years relevant working experience.
2. Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
3. Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, ICP/OES, NIR, and other measurement tools.
4. Excellent written and spoken communication skills in bilingual languages (English and Mandarin) to liaise with English and Mandarin-speaking associates/clients.
5. Hardworking, able to multi-task, and willing to work long hours when necessary
6. Team player with excellent interpersonal skills and a strong sense of ownership with responsibilities to achieve project and business objective
7. Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
8. Willingness to travel when required.