• Carry out project management role for the installation of telecommuication 4G/5G equipment, access points to meet project deadline.
• Business Development scope for TSI/Telecoms Package projects .
• Support Telecoms Lead Engineer in all other Telecoms activities
• Wor on Telecoms systems studies such as PAGA coverage study, radio coverage study, VSAT link calculation, fibre optic link budget, etc
• Liaise with client to resolve Engineering comments and provide solution
• Coordinate with other disciplines and contractors on systems interfaces
• Interpret schematic diagrams and possess a strong understanding of basic electronics and RF telecommunications.

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

• Provides assistance to shipyard team and foremen
• Develops departmental plans, including production and/or organizational priorities
• Directs activities in areas of safety and personnel, production, scheduling, material handling and quality and ensures compliance with all Safety, Quality, Company and Regulatory directives
• Review and interpret designs, drawings & specifications
• Directs and coordinates shipyard operations within company policies and procedures
• Responsible for providing the quantity and quality of workers to meet schedule
• Directs all phases of steel fabrication, assembly and erection, piping fabrication and installation, outfitting
• Monitors the performance of assigned supervisors
• Maintains appropriate interface and relations with customers, paying detailed attention to site requirements
• Translates company strategies into tactical plans. Creates and prioritizes necessary resources and steps required to accomplish goals on time
• Establishes all shift production schedules
• Establishes and maintains shipyard production goals to ensure production schedules are met
• Schedules and conducts meetings in conjunction with Manager and Workforce
• Ensures product quality control goals are met
• Maintains a clean and safe work site

Purpose: Provide the fabrication steps & process time to calculate the cost of the part. This includes assessing whether the design provided is machinable, the availability of machines or tools to support the requirements and proposing cost-efficient methods.

Key Areas of Responsibility:

• Provide machining process steps for quote submission to determine process cost calculation.
• Review the part drawings & specifications provided and consider the critical dimensions or process.
• Identify machining issues and provide Design for Manufacturing (DFM) slides to highlight issues; present an alternative proposal when possible.
• Generate a drawing/list of the requirements before sending the Request for Quote (RFQ) to suppliers.
• Inform suppliers of requirements & stipulate a cost breakdown list. Ensure that suppliers meet the specified timeline.
• Provide Part Cost estimation for Outsource Build to Print (BTP) parts for the Commodity team to use as a price reference.
• Mentor new hires on operations and part calculation processes to ensure they receive the information and guidance needed to perform their jobs effectively.
• Support and participate in company continuous improvement program.

Qualifications & Experiences:

• Nitec/Dilpoma/Degree in Mechanical Engineering or relevant field.
• Minimum 1 year of working experience in the Semiconductor or High precision equipment industry, with relevance to costing will be an advantage.
• Knowledge of Solidworks or other computer-aid design software.
• Application of measuring equipment and techniques
• Knowledge of geometric dimensioning and tolerancing

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Job Responsibilities:

• Knowledgeable in servicing and maintenance for refrigeration / electrical machines.
• Identifying faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submitting of daily report for servicing & maintenance functions.
• Ensure all documents are updated upon completion of work
• Ensuring all works comply with the appliance standards and Health and Safety Act.
• Perform equipment quality compliance check.
• Work closely with direct superior to maximize repair rates.
• Maintaining service vehicle in good condition.
• Maintain the work bay and workshop areas in orderly and safe working conditions and exercise good housekeeping practice.
• Any other duties as assigned.

Job Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.
• Other relevant skills or experience we will consider to be of benefit.
• Basic and/or excellent written (English)

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

General Overview

The position is part of the site Instrument, control and electrical (ICE) team that provides maintenance and technical support to the Operations and Project teams in the LNG Terminal. The incumbent is responsible for establishing, reviewing and overseeing the integrity of the on-stream continuous analyzers and quality management in the Terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Maintenance of process on-stream and laboratory analyzers
• Work on continuous improvement projects to resolve any issues related to correct functioning of process stream analyzers
• Develop and update standard operating procedures for all process stream analyzers, sampling and laboratory equipment
• Manage and oversee the laboratory operations with laboratory service provider
• Upkeep laboratory related documents such as safety, quality manuals, standard operating procedures (SOP) and laboratory logbooks delivered by vendor
• Addressing customers’ queries related to measurement and quality management

Work Experience

• 5 to 8 years of experience in maintenance of various process analyzers such as Gas Chromatography, Wobbe index analyser, HydroCarbon Dewpoint analyzer, THT analyzer, Auto-sampler etc.
• Previous experience in design, installation, commissioning, maintenance of instrumentation and analyzer systems in oil and gas/petrochemical industry/Analyzer vendor is required
• Knowledge in ISO17025 - general requirements for the competence of testing and calibration laboratories.

Education & Requirement

• Bachelor’s degree in engineering; preferably in Chemical/Electrical/Electronic or equivalent.
• In addition, the successful candidate should possess the following personal attributes:

1. Strong knowledge of various type of analyzers and sampling systems
2. Highly analytical and meticulous.
3. A team player and possess strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

Key Responsibilities:

1. Technical Support:
   • Provide first- and second-line support for hardware and software Installation.
   • Troubleshoot desktop, laptop, and peripheral problems to ensure minimal downtime.
   • Respond to service requests and incidents in a timely manner.
2. Hardware & Software Management:
   • Install, configure, and maintain desktop and laptop operating systems (Windows/Mac/Linux).
   • Install and update software applications and drivers.
   • Set up and maintain user accounts and permissions.
3. Asset Management:
   • Manage IT inventory, including desktops, laptops, and peripherals.
   • Ensure proper documentation and tracking of IT assets.
4. Network Support:
   • Assist with basic network troubleshooting (e.g., connectivity, printer access).
   • Support VPN, wireless, and LAN/WAN configurations as required.
5. Collaboration & Training:
   • Work closely with other IT teams to resolve escalated issues.
   • Provide user training for new hardware or software implementations.
6. Security & Compliance:
   • Ensure devices are compliant with company security policies and standards.
   • Conduct regular updates and patches to maintain system integrity.

Key Requirements:

Education & Experience:

• Diploma in Computer Science, Information Technology, or a related field (preferred).
• Proven experience (2+ years) in a similar desktop support or IT helpdesk role.

Technical Skills:

• Proficiency in Windows and macOS operating systems.
• Familiarity with Active Directory, Group Policy, and Office 365.
• Knowledge of basic networking concepts (DNS, DHCP, TCP/IP).
• Experience with remote support tools like TeamViewer, AnyDesk, or SCCM.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Benefits:

• Basic Salary up to $2,400 with yearly increment based on performance.
• Entry level is welcome
• Up to 14 Annual leave for first year
• Free lunch every Friday | Free fruit every Monday
• 5 days work (Monday to Friday) – 8am to 5pm.
• Saturday & Sunday rotational depending on roster (8am to 5pm)

Job Description:

This is a full time role for a Customer Service located in Tuas. Our client is a reputable waste management and recycling company in Singapore, dedicated to providing sustainable solutions for waste disposal. You will involves supporting daily operational tasks while ensuring customer orders are managed and followed up efficiently. It requires the ability to perform well under pressure in a fast-paced environment and maintain effective communication and coordination with team members. Additionally, the candidate will handle other responsibilities as assigned by the supervisor.

Qualifications:

• Customer service oriented with pleasant and polite
• Positive attitude, organized and problem-solving skills

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Responsible for management of various PLC programs and SCADAs, EMS, BMS, Various Software, Hardware, VFDs at site, Program backup and recovery as & when required. Change management etc.

· Planning & execution of all new and retrofit manufacturing equipment, packaging line related projects for the site.

· Ensuring the best available technologies are incorporated by design.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Delivering the project within the budget and timeline approved.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirements to ensure efficient, reliable, and uninterrupted operation.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure the site manufacturing equipment are kept to the highest standards for cGMP requirements, including Sterlie filling, Granulation, Compression, Packaging etc.

· Responsible for development SOPs and quality standard for site with following of site QMS procedures.

· Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep site audit ready for all the time.

· Responsible for managing a team of vendors / contractors.

· To assist on any ah-hoc duties that have been assigned / task by the immediate supervisor.

Education:

· Bachelor or Master Degree in Electrical/ Instrumentation / Automation / Mechatronics engineering or a related field.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in PLC program (ladders, function block, OPC code…etc)

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste

treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system,
• Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services,
• Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS,PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Requirements:

• Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the
• Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to
• Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure Project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

Visa’s Technology Organization is a community of problem solvers and innovators reshaping the future of commerce. We operate the world’s most sophisticated processing networks capable of handling more than 65k secure transactions a second across 80M merchants, 15k Financial Institutions, and billions of everyday people. While working with us you’ll get to work on complex distributed systems and solve massive scale problems centered on new payment flows, business and data solutions, cyber security, and B2C platforms.

The Opportunity:

We are looking for versatile, curious, and energetic Senior Staff Software Engineers who embrace solving complex challenges on a global scale. As a Senior Staff Software Engineer in the Issuing Solutions group, you will spearhead the architecture and design of a variety of projects. You will drive technical solutions that have a direct impact on the payment industry. The solutions you design will be large scale, always available, secure, fast, accessible, and globally ready with an impact measured in future years.

The Work itself:

• Deliver enterprise solutions at scale for Issuing Solutions and deliver the next generation of issuing platform.
• Design the most appropriate solution with well-understood trade-offs that meet business requirements.
• Propose new solutions to meet the fast-changing payments industry landscape.
• Play the main Lead role to understand high-level product requirements and help the team translate that to low-level engineering design for new features.
• Be able to come up with and evangelize architectural guidelines from an engineering standpoint to develop massively scalable, distributed systems.
• Review and recommend Visa and open-source/commercial libraries to deliver best-in-class software as per project requirements.
• Lead meetings and discussions with product and architecture teams.
• Lead and provide technical mentoring to a team of talented engineers and guide them on development and testing best practices.
• Leverage newer technologies and lead efforts to architect, design and implement/test various aspects of secure payment solutions.
• Understand and enhance coding guidelines and oversee code review processes.
• Review test strategy and test cases developed by test engineers to ensure optimum quality of solutions being delivered.
• Adhere to Agile/Scrum best practices and plan well in advance for sprint-based development and testing to ensure smooth releases on time and with high quality.
• Contribute towards team’s innovation agenda by leading efforts for participation in Hackathon and similar events through submission of unique ideas for payment solutions.
• Have a passion for emerging GenAI technologies, with an ability to understand and align with Visa’s strategy in this area and guiding and shaping team’s adoption plan accordingly.

The Skills You Bring:

• Energy and Experience: A growth mindset that is curious and passionate about technologies and enjoys challenging projects on a global scale.
• Challenge the Status Quo: Comfort in pushing the boundaries, ‘hacking’ beyond traditional solutions.
• Language Expertise: Expertise in one or more general development languages (e.g., Java, C#, C++).
• Builder: Experience building and deploying modern services and web applications with quality and scalability.
• Learner: Constant drive to learn new technologies such as Angular, React, Kubernetes, Docker, etc.
• Partnership: Experience collaborating with Product, Test, Dev-ops, and Agile/Scrum teams.
• Experience in delivering enterprise-class, mission-critical, commercial, and scalable products.
• Hands-on development experience in backend technologies including JAVA, J2EE, SQL, Spring Framework, Spring Boot, MongoDB, JPA/Hibernate, Kafka, and RabbitMQ.
• Strong foundation in data structures, algorithms, problem-solving, and complexity analysis.
• Experience with Application Servers and Databases such as Tomcat and Oracle, with knowledge of MongoDB, Cassandra, or Couchbase as a strong plus.
• Understanding of multi-threaded concurrent programming and non-blocking IO.
• Knowledge of various testing methodologies (functional, integration, regression, penetration, and performance testing).
• Familiarity with common application security vulnerabilities (OWASP).
• Knowledge of Continuous Integration/Delivery, Test Driven Development, and microservices.
• Experience with container platforms like Kubernetes, Docker, and OpenShift.
• Knowledge of performance analysis tools like Riverbed and monitoring tools like Splunk and Opera.
• Strong leadership skills and the ability to influence and develop relationships with key partners.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.