Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Job Responsibilities:

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors/SWCs etc
• Liaise with QP(s) for technical issues and coordinate the site activities with subcontractors
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Attend all meetings with Stakeholders such as Authorities, Subcontractors, etc
• Prepare Monthly Progress Report
• Ensure site safety and compliance to Authorities' requirements

Requirements:

• Candidate must possess at least Bachelor's Degree in Civil Engineering Recognised by the PE Board
• At least 5 Year(s) of working experience in construction of civil and structures for LTA/MRT Projects
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• Required Skill(s): Registered engineer
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

We are seeking an Assistant Marine Engineer (Shore-Based) to support the maintenance, repair, and operation of marine systems and equipment. You will assist in coordinating technical services, overseeing compliance with maritime standards, and ensuring vessel readiness from a shore-based perspective.

Key Responsibilities:

• Assist in planning and supervising maintenance and repair activities for vessels.
• Monitor and ensure compliance with maritime regulations and safety standards.
• Conduct technical inspections and troubleshoot marine systems as needed.
• Coordinate with vendors, suppliers, and ship crews for timely parts procurement and service.
• Prepare technical reports and documentation on vessel performance and maintenance.

Requirements:

• Bachelor’s degree in Marine Engineering or equivalent.
• 5-10 years of experience in marine engineering or a related field (shore-based experience preferred).
• Knowledge of maritime regulations and safety standards (e.g., IMO, SOLAS).
• Strong problem-solving and communication skills.
• Proficiency in using technical software and tools relevant to marine engineering.
• Willingness to travel occasionally for inspections and project oversight.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Responsibilities:

1. Primary Roles: Customer Service Support

a. Handles incoming enquiries, live chat.

b. Coordinate e-shop customer registration, order processing, e-marketplace coordination (Shopee, Eezee, etc)

c. Reporting and documentation for e-shop & leads

d. Coordinate with local supplier & internal procurement team to check availability of stock, pricing and delivery.

e. Coordinate with Warehouse local team to arrange local collection or delivery & with shipping department for overseas shipping arrangement.

f. Prepare necessary paperwork, such as quotations, Proforma invoices, etc.

g. Follow-up quotations & Orders

h. Onboarding customers to new Digital commerce platform

2. Secondary Roles: System Support

a) System support for systems that already go live.

b) Liaison between end-users and developers by understanding user needs, communicating issues, and facilitating effective resolutions without necessarily engaging in programming.

c) Other ad-hoc responsibilities by management

Requirements:

1. At least GCE “O” levels or equivalent

2. At least 1-2 years working experience in Customer Service or Sales experience in handling overseas customers and feels comfortable talking to them over the phone

3. Pleasant personality and Customer Service oriented

4. Able to work independently as well as in a team

5. Good communication skills

6. Proficient in MS Excel (MS Powerpoint a plus)

7. Good to have: Tech-savvy (Ability to quickly learn new tools and adapt to the fast-paced nature of the digital commerce industry)

We're looking for a Senior Manager of Engineering/Maintenance to lead high-performing teams, drive strategic initiatives, ensuring the reliability and efficiency of our systems. You'll oversee engineering and maintenance projects, mentor talents, and collaborate across departments to deliver scalable solutions that meets business needs. Join us to make an impact!

At dsm-firmenich, being a force for good is not optional. Diversity, Equity & Inclusion is a shared responsibility woven into our daily work to not only benefit our People, Customers & Communities but also drive business value. Equal access to opportunities is a given, belonging is a shared feeling, authenticity is celebrated.

Your key responsibilities

• Capital Expenditure & Project Management
• Management of Changes (MOC)
• Maintenance Management
• Continuous Improvement
• Capability Management & Development
• Compliance Management
• Team Management

We bring

• Empowerment to make meaningful contributions while upholding ethical standards.
• Recognition and celebration of your efforts and accomplishments.
• Opportunities for growth and advancement for those who embrace innovation and take initiative.
• Dedication to creating better futures for customers, communities, people, and the planet.
• Responsibility and accountability in living company values and driving sustainable solutions.
• Supportive environment where individuals are empowered to progress and contribute to meaningful change.

You bring

• Degree in Chemical Engineering or equivalent with at least 7 years of plant equipment / maintenance experience.
• At least 5 years Project management skills and experience. At least 3 years’ experience in root cause analysis.
• SAP/BMS/Traksys experience preferred. Six Sigma Black belt certified would be an added advantage.
• Leadership qualities and ability to plan ahead. Positive working attitude and good interpersonal skills.
• A can-do mindset to problem-solving, fueling innovation by seeking new solutions and perspectives. A sense of ownership, excel in compliance, people development and delivering results that matter and contribute significantly to our success.
• Accountability to decision-making, ensuring alignment with our Mission, Vision and achieving positive outcomes. A spirit of initiative and drive for progress, provide a sustainable value chain through continuous improvement.
• A commitment to teamwork, fostering trust, collaboration and respecting diverse perspectives.

Equal opportunities commitment

dsm-firmenich is fully dedicated to inclusion because when people feel engaged and empowered, their creativity and innovation drives unprecedented progress. We aim to build a workplace where opportunity really is equal, so everyone can thrive. We do not discriminate, there’s a place for everyone at dsm-firmenich.

dsm-firmenich is an Equal Opportunity and Affirmative Action Employer. dsm-firmenich people are as diverse as our customers. For us that includes a commitment to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

We are committed to providing reasonable support for disabled applicants in our recruiting process. Should you need assistance, and are comfortable to share this, please let us know.

About DSM-Firmenich

As innovators in nutrition, health, and beauty, dsm-firmenich reinvents, manufactures, and combines vital nutrients, flavors, and fragrances for the world’s growing population to thrive. With our comprehensive range of solutions, with natural and renewable ingredients and renowned science and technology capabilities, we work to create what is essential for life, desirable for consumers, and more sustainable for the planet. dsm-firmenich is a Swiss-Dutch company, listed on the Euronext Amsterdam, with operations in almost 60 countries and revenues of more than €12 billion. With a diverse, worldwide team of nearly 30,000 employees, we bring progress to life™ every day, everywhere, for billions of people.

Please note this is a direct search led by dsm-firmenich. We only accept applications from candidates, not from agencies nor subject to agency’s fees, percentages or similar.

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Summary

The Sales Engineer will be based in Singapore and is accountable to generate profitable sales revenue and increase operating income by broadening sales coverage, establishing new accounts, and providing total solutions for compressed air to customers in Singapore.

Responsibilities

• Identify and source new clients and business prospects (e.g., perform outreach to cold leads via calls and emails).
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with customers (incl. customer visits) to solicit for orders.
• Negotiate tender, contract terms and condition and prepare Sales contract.
• Prepare sales report, analysing cost and sales, quotations and maintaining and creating new client accounts.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Sales experience with industrial products such as Air Compressors, Dryers, or other similar industrial equipment.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore to meet clients or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Commissions
• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!