Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

. JOB DESCRIPTION

Job Description & Requirements

1. Experience in metal fabrication n installation works

2. Proficent in mechanical engineering drawings n autocad

3. Perform project management n supervise site works

4. Able to coordinate with customer, Vendors n fellow workers to meet project dateline

5. Posses a class 3 licence with driving experience

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Responsibilities:

• Design of heavy structures made of aluminium alloy
• Liaise with clients, vendors and third parties on technical issues
• Cooperate with project team on the project planning and execution
• Supervise/check the design drawings and material take-off
• Perform structural analysis and prepare structural analysis report

Requirements:

• Degree in structural/marine/naval architecture/civil/ engineering
• Min. 5 years experience in structural design in offshore/marine/civil industry
• Strong technically and competent in structural design and analysis
• Familiar with and experience in international structural design codes, standards and project specifications and structural design software packages
• Experience in aluminium design is not required as training will be provided
• Good written and spoken English
• Come and convince us why you are the best person for the job

Job Responsibilities:

- Perform basic and advanced machine electrical wiring works

- Develop electrical testing jigs and perform testing and validation of machines

- Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.

- Creates, implements, and monitors KPI indicators on product quality and section capability

- Provide shop floor feedback to Production Engineering and D&D Department

- Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models

- Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard

- Able to troubleshoot and resolve machine electrical non conformance

- Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality

- Prepare reports on productivity, quality, claims, etc

- Work with engineering and other departments to improve assembly processes

- Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition

- Maintain accurate records of inspection result at each electrical process

Job Requirements:

- Minimum Diploma or equivalent in Electrical required

- 2-3 years working in a machine assembly environment

- A good track record of supporting the department achieving KPI

- Strong understanding of 5S and HSE knowledge

- Able to work effectively in a fast and ever-changing stressful environment

- Maintain good Quality standards, 5S and safety discipline

- Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)

- Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

Job Description

- Work with Production Engineers, Supervisors and Technician to design, develop, and improve engineering processes.

- Planning and coordinating of production schedule and production output.

- Plan and implement improvement projects for productivity improvement

- Ensuring all monthly operating expenses stay within allocated budget.

- Support inspections of equipment and scheduling maintenance or repairs with Maintenance Dept

- Inspecting inventory and reporting inconsistencies as well as ordering more materials.

- Producing CAD drawings, nesting thru company smart system according to our standard specifications.

- Evaluating first article and processes and ensuring standardization of quality assurance measures.

- Calibrating and troubleshooting of equipment /machines as required.

- Perform time study and improve standard time hour

Job Requirements:

- A degree or minimum diploma in Engineering discipline.

- Minimum 2 years' experience in precision engineering in manufacturing industry

- Proficient in 3D drawing software – Solidworks

- Proficient in Microsoft Office

- Familiar with manufacturing quality assurance techniques

- Understand 5S discipline, TQC and other quality improvement tools

- Good interpersonal skills, problem-solving and project management skills

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Addcel has been delivering deep value to clients across Semi-con, Pharmaceutical, Data Centers & Oil & Gas industries since 2010.

Specialising in Design & Build of process utility systems, prefabrication/ DFMA, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

The Process Engineer reports to the Tender Manager and is responsible for the below:

• Design and develop industrial processes to improve efficiency and safety.
• Perform calculations for flow rates, pump sizing, temperature, and pressure.
• Develop and review process design documents and specifications.
• Utilize process simulation software to model and optimize processes.
• Collaborate with cross-functional teams, including operations, maintenance, and project management.
• Provide technical support and troubleshooting for process-related issues.
• Ensure compliance with industry standards and regulations.
• Conduct risk assessments and implement safety measures.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Min. 3 - 5 years of relevant working experience, preferably in Semi-con, Data-centre, Pharma & Oil & Gas.
• Strong knowledge of process design principles and methodologies.
• Experience in the oil & gas, chemical, or manufacturing industries.
• Experience in extracting BOQ from layout and P&ID drawings for tender preparation.
• Experience in attending technical clarification meetings and presentation
• Familiarity with Distributed Control Systems (DCS) and instrumentation.
• Strong knowledge of process utilities design (Chilled Water, Steam, Process Cooling Water, and CDA systems).
• Proficient in pipe sizing, stress analysis, pump head, and hydraulic calculations.
• Familiarity with proposal costing and tendering processes in EPC projects.
• Strong communication skills with the ability to propose alternative technical solutions.
• Detail-oriented and proficient in Excel.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work effectively in a team environment.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Unlock your potential with us! Join us as a Technical Sales Engineer who will be involved primarily in high temperature and corrosion resistant (nickel alloy) materials supporting the petrochemical, aviation, waste to energy, pharmaceutical sector. Your positivity and energy will thrive in this new, rewarding opportunity.

Responsibilities

• Work with well-established customers base in the petrochemical | pharmaceutical | aviation, and OEM industries in Singapore
• Interpret customer requirements
• Understand industry standards and specifications
• Read customer drawings and generate bill of materials
• Formulate sales proposals and negotiate directly with end users to close orders
• Negotiate procurement of materials, parts, sub-contract services and logistics

Requirements

• Degree or Diploma in an engineering discipline
• Working knowledge of industrial piping and related hardware
• Reward driven with a real desire to improve sales and business margins
• Proficient with MS Excel

Advantages

The following optional skills or work experience would be an advantage

• Familiarity with ASME | DIN | JIS and similar material specifications
• Previous experience in a plant or on-site maintenance or engineering role

Additional Information

*The position will be in an office based working environment. No outdoor sales required.

*Applicants without prior sales experience but with engineering background may be considered.

*Monthly Salary Range shown excludes commission component.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Oversee the installation, testing, and commissioning of piping systems on-site
• Ensure piping installations meet project specifications, codes, and standards
• Address any on-site technical issues related to piping and provide solutions
• Coordinate with contractors, suppliers, and other engineering teams to ensure timely and efficient execution of piping work
• Conduct inspections and tests on piping systems and prepare documentation
• Maintain records of piping activities, including work progress, testing, and inspection reports
• Any duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Mechanical Engineering
• Minimum 5 years experience in a similar role
• Candidates are required to have prior experience in power and/or industrial plant projects
• Proactive learner and ability to multi-tasks
• Ability to adapt to dynamic and challenging construction site environments
• Project Location: Jurong Island

Job Title: Procurement Engineer - Electrical & Instrumentation (E&I)

Main Responsibilities:

1. Supplier Sourcing & RFQs:Source potential suppliers in line with project specifications. Send out Requests for Quotation (RFQs) to suppliers and evaluate responses.
2. Vendor Management:Evaluate new and existing suppliers for inclusion in the Approved Vendor List (AVL). Coordinate with vendors for technical clarifications and requirements.
3. Negotiations & Purchase Orders:Perform negotiations with shortlisted suppliers to obtain the best price while ensuring timely delivery. Ensure that appropriate terms and conditions are included in the purchase orders. Prepare Bidtabs for internal approval. Prepare Purchaser’s Terms & Conditions for purchases over SGD 150K.
4. Project Coordination:Coordinate with the Project Team and suppliers for all procurement-related issues. Manage urgent purchases and ensure timely order processing. Ensure coordination with Material/Logistic Controllers for Goods Receipt/Issue (GR/GI) issues.
5. Vendor Training & Product Presentation:Organize training sessions and product presentations from vendors to ensure project teams are informed of key product specifications and details.
6. Delivery & Expediting:Monitor and ensure the timely delivery of materials and equipment from vendors. Assist in expediting deliveries when required and coordinate with Finance for invoice-related issues.
7. Return & Replacement:Coordinate with vendors for returns or replacements of defective materials. Issue Purchase Orders (PO) for replacements, as necessary.
8. Documentation & Reporting:Maintain accurate records of procurement activities and report to Supervisor on progress. Ensure all procurement documents are archived and accessible as per company requirements.

Qualifications & Skills:

• Diploma / Bachelor's degree in Engineering, Supply Chain Management, or a related field.
• Proven experience in procurement and supply chain management, especially in Electrical & Instrumentation (E&I).
• Strong negotiation skills and vendor relationship management.
• Proficient in procurement software and MS Office (Excel, Word, PowerPoint).
• Ability to work in a team and handle multiple tasks simultaneously.
• Strong organizational and communication skills.
• Knowledge of industry standards and regulations in procurement.

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Roles & Responsibilities

As a Technical Sales Engineer, you’ll use your technical know-how to help our clients find the best solutions for their dust collection needs. You’ll be the bridge between our products and the customers, making sure they get the right equipment and support. If you’re driven by problem-solving, enjoy working with people, and have a knack for sales, we’d love to talk to you. The company is entering an exciting phase of growth and we’re looking for someone who’s eager to be part of that journey.

Key Responsibilities:

· Generate new business by promoting and selling industrial dust collection systems.

· To undertake preliminary design, technical review, prepare quotation and sell industrial air filtration machines and equipment.

· Provide technical support to customers, helping them choose the right products.

· Prepare and present quotes and proposals.

· Work with the engineering and operations teams to deliver tailored solutions.

· Build and maintain relationships with new and existing clients.

· Stay informed about industry trends and competitor products.

· Attend client meetings and site visits when necessary.

· Resolve any issues to ensure customer satisfaction.

Salary Package: Basic + Commission + Allowances

Working hours: Mon-Fri, 08:00 - 17:30

Requirements

· Diploma Mechanical/Electrical Engineering or a related field.

· 2-3 years of experience in technical sales

· Strong communication and negotiation skills.

· Able to work independently and manage the entire sales process.

· Possess own transport (transport allowance provided)

Plus Points

Prior sales experience in industrial equipment, dust control, blasting, HVAC systems etc.