Job Description

• Take food order and serving of food to customers
• Attend to customers' queries and ensure quality guest services
• Have knowledge in every dish served and to provide explanations as requested
• Obtain feedback from customers and to use it to improve service
• Coordinate with kitchen staff to ensure smooth and efficient operations
• Ensure cleanliness and hygiene are kept up to standards
• Other ad-hoc duties assigned by the Restaurant Manager

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

* Manage on-site installation, repairs, maintenance and test tasks for all commercial kitchen

equipments.

* Ability to diagnose errors on technical problems and determine proper solutions.

* Produce training to customers on product usage and maintenance.

* Build positive relationships with customers by providing outstanding and excellent services.

* Positive working attitude.

* Produce detailed service report.

Service Technician Job Description

We are looking for a technically skilled service technician to our businesses to perform system repairs. The service technician will install and test products and provide customers with instructions on the proper usage of the product. To be successful as a service technician, you should have excellent technical skills.

Service Technician Responsibilities:

• Answering telephone inquiries and assisting clients.

• Installing and testing products, equipment and providing instructions to customers on the proper usage of their product.

• Using diagnostic tools to identify issues and evaluating the available information.

• Fixing defective or broken products or ordering the necessary parts to replace faulty or worn-out parts.

• Promoting the company's services.

• Maintaining your technical skills.

Service Technician Requirements:

• The ability to work independently.

• Managing overtime on service calls with patience and not rushing the job.

• Excellent customer service and communication skills.

• The ability to diagnose and solve problems based on customers' nontechnical descriptions.

• Strong working knowledge in the industry.

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

• Visit clients’ sites to perform servicing and maintenance on microscopes
• Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

Responsible for day to day facility operations which include maintaining uptime and operations of air-conditioning systems, carry out building maintenance, servicing and trouble-shooting.

Ensure all facilities service are smooth and uninterrupted at all time.

Co-ordinate and follow up with WSH Officer and Safety Manager on all statutory requirements.

Requirements:

Secondary Education or Diploma or NITEC certificate (Electrical certificate) with minimum 2 year’s relevant working experience

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Work experience in Process Instrumentation is a plus
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Maintenance and Production Operator
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8AM – 5PM, Sat: 8AM - 12PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and Packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• Able to work in a dusty environment
• On-Job training provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71458 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Position Overview

The candidate will assist the Maintenance Supervisor to conduct preventive maintenance, troubleshooting & repair of CNC machines and update maintenance records regularly.

Job Responsiblities

• Preventive maintenance and calibration of the machines according to the checklist
• Analyse machine problems and repair
• Update and maintain maintenance records and forms regularly
• Any other ad-hoc maintenance activities such as maintaining coolant and lubrication of machines
• Perform other duties and responsibilities, as assigned.

Position Requirements

• Minimum 3 years of hands-on experience in maintenance and repair of CNC metal cutting machines
• Good knowledge in Electrical and Mechanical aspects of CNC Machines
• Able to read the PLC

Responsibilities:

• Offer a professional, friendly greeting and engaging service
• Assist in monitoring the guests’ needs, check and coordinate special requests such as special menu requirements, cake or flower orders, tables’ requests, and promotional offers
• Allocate and check the table arrangement both prior and during service, ensuring special requests are met wherever possible
• Check on guests’ satisfaction, attend guests’ needs and comments with proper follow up with Manager
• Any other ad-hoc duties as assigned by the Company

Requirements:

• Able to work on split shifts, weekends, and public holidays
• PC literate, well-organized, and self-motivated
• Possess good communication and interpersonal skills

Whatsapp 91834574 for more information

JOB RESPONSIBILITES

• Assists Service Leaders in organising table seating
• Serve water and refill glasses as and when needed
• Setup, breakdown the restaurant.
• Setup, clear and help maintain tables
• Complete opening and closing sidework.
• Possess extensive and correct knowledge of menu and non-menu items, their ingredients.
• Maintain side stations stocked and clean
• Assist in cleaning up spills and table cleanliness
• Ensured the timely delivery of food / beverage orders
• Handle basic customers’ queries

Service Manager Responsibilities:

• Delegating and directing service tasks, monitoring the progress of current projects, and managing service team members to ensure the team's objectives and sales goals are met.
• Handling customer complaints or concerns quickly and professionally to maintain good customer relationships and ensure repeat customers.
• Assisting with or performing administrative tasks, such as managing and updating invoices, processing new orders, and tracking inventory.
• Setting up and maintaining a service desk and evaluating its efficiency.
• Resolving service desk problems and improving service methods to increase the service desk's productivity and customer service.
• Monitoring department issues and client complaints to create methods to lessen recurring issues.
• Auditing work and customer service to ensure the company's high standards, efficiency, and productivity goals are met.
• Maintaining strong relationships with manufacturers, dealers, and sales representatives.
• Helping to train new employees in company procedures.
• Maintaining a strong working knowledge of industry regulations, restrictions, and laws, ensuring the company's adherence to these regulations, and remaining current on the industry's standards and new innovations, materials, tools, and processes.

Service Manager Requirements:

• A bachelor's degree in business, administration, or related field.
• Previous sales and management experience may be advantageous.
• Strong industry knowledge.
• Excellent leadership, communication, sales, and customer service skills.
• Computer literacy and good organizational skills.
• Strong creative thinking and problem-solving skills.
• The ability to work under pressure and handle stress.

Responsibilities:

• Familiarity of ship owners' and shipyards' working procedures and environments
• Willing to work in local and foreign shipyards as well as in anchorage environments at irregular hours, including weekends, public holidays, and overnights, depending on vessel schedule
• Capable of inspecting, troubleshooting, and performing full maintenance on the ship's navigation equipment and main engine remote control system

Requirements:

• Relevant marine / mechanical / engineering qualification
• Sound knowledge in pneumatics / electrical control engineering
• Hands on experience in Marine Automation
• Those with minimum experience or education level will be consider for Technician

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities

Restaurant Operations

o Execute assigned area of responsibility (e.g. greeter, runner, bartender, cashier) based on SOP

o Set up restaurant for service day, which include but not limiting to checking on availability of food item and special menu, guest reservation status, service area set-up, cash register and payment machines

o Provide service to customers

o Execute proper cash management

o Preparation and serving of all drinks, beverages and dessert items

Restaurant Management & Planning

o Address customers’ complaints in accordance to guidelines and to escalate issues to supervisors when necessary

o Identify and report all potential problems and to provide recommendations pertaining to the provision of services, food quality and cleanliness

Quality Assurance & Control

o Comply with SOP and safety requirements

o Ensure quality of food is up to the prescribed standard

o Ensure safety and hygiene standards are maintained by inspecting and cleaning of all utensils and restaurant area

o Identify and report unsafe and/or non-compliant conditions and behaviors pertaining to personal and food safety

People Management

o Perform as a reliable team member and communicate clearly and audibly.

Job Description:

Technical Tasks:

• Performs installation & provides basic technical training when neccessary (Mainly Workplace infrastructure - WPI products: Medical Pendents & Lights / Gas Management solutions)
• Perform related upgrades / Technical Service Bulletin from factory instructions to ensure devices / equipment are up to date.

Service Operational Tasks:

• Escalate quality-related situation, market dynamics and issues from field to the Service management in his country
• Monitor and drive completion of monthly maintenance tasks and paperwork for assigned customers’ accounts

Service Commercial-related Tasks:

• Makes constant efforts for contract development and implementation of Service programs
• Any other additional duties deemed appropriate by Service Manager

Job Requirements:

• Minimum Nitec in Engineering/Electronics or Equivalent
• 2-3 years of technical experience preferable in after sales support in medical industry, or Workplace Infrastructure related secto

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Responsibilites

• Ensure that products assembled and tested conforms to specifications and are in accordance to the quality standard laid out.
• Performs assembly and test processess according to establised process / test instructions.
• Maintain high standard of safety and housekeeping practices (5S) at all times
• Participates in new products evaluation and transfers as assigned
• Support Quality Management System
• Supervise site team & maintain regular & effective communication with superiors and other team members

Requirments

• Degree/Diploma in Mechanical / Electrical Engineering
• Working experience with assembling in mechanical or Electrical will be advantage
• Equipment setup assembling, testing and debug of capital equipment experience will be added advantages
• Working area : Woodlands (will be clean room enviornment) / Kaki Bukit

Role & Responsibilty

• Responsible for quantity take-offs and Cost Control functions for projects.
• Subcontracts management.
• Supervisor and Plan for Daily work schedule and progress for requirement for targeted completion.
• Tracking of Subcontractors/ Suppliers obligations required as per agreement.
• Administering variations to subcontractors and suppliers.
• Preparation of progress certificates for subcontractors and suppliers.
• Assist in the preparation of the monthly cost reporting and forecasting.
• Identification and pricing of variations to the Contract.
• Assist in preparation of monthly commercial report.
• Maintaining registers of variations, extension of time claims.
• Liaising effectively with other Technician, engineers and supervisors to ensure all relevant information in relation to variations. and extension of time claims is captured.
• Any other duties as may be required by the Company.

Requirement

• Diploma / Degree
• Minimum 2 to 5 years experience as a Engineer
• Passionate about Project values of safety & care, being honesty & integrity, customer focus, working together and performance excellence.

Job Scope:

• Manage and oversee the day-to-day construction activities on the site, ensuring that work is progressing as per the project schedule and plans
• Collaborate with project managers, architects, subcontractors, and other professionals to ensure effective communication and coordination among different parties involved in the project
• Monitor construction quality and ensure that work is being carried out according to approved plans, specifications, and industry standards
• Enforce and promote safety measures and regulations on the construction site to ensure the well-being of workers and compliance
• Coordinate site logistics, including material deliveries, equipment allocation, and workforce management to ensure efficient utilization of resources
• Provide regular updates to project managers and stakeholders on the project's progress, highlighting any deviations from the plan and proposing corrective actions
• Monitor and control project costs by tracking expenses, material usage, and labor hours, and identify areas where cost-saving measures can be implemented
• Assist Project Manager in proposal and review of M&E Design and drawings
• Completing regulatory documents concerning safety issues
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Bachelor of Degree in Mechanical Engineeringor related equivalent
• 7 year of experiences as engineer in construction sector
• Strong knowledge of construction methods, materials, and processes
• Familiarity with relevant construction codes, regulations, and safety standards
• Proficiency in using construction management software and tools such as CAD and Revit
• Knowledge in safety management
• Excellent communication and interpersonal skills
• Leadership abilities to manage and guide on-site teams effectively
• Problem-solving skills to address unexpected challenges
• Attention to detail and a commitment to quality
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 Working days

We are regret that only shortlisted candidates will be notified.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results
• Ability to supervise technicians
• Focus and concentration to understand complex electrical systems
• Using industry-specific tools to analyze and test electronics
• Time-management skills for meeting deadlines
• To Project Management Coordinate with main-con &consultant for drawing submission, meeting with main-con and consultant
• Focus and concentration to understand complex electrical systems
• Self-motivation to keep up with current electrical advances using new technologies
• Ability to supervise technicians
• Prepare Electrical shop & As-buits SLD RCP drawing
• LV &HV CABLE SIZING CALCULATION &PREPARE BILL OF MATERIAL
• select appropriate electrical materials to complete designs such as MSB, DISTRIBUTION LIGHTING FIXTURES, CABLE TRAY LAYOUT,LIGHTING &RECEPTABLE LAY OUT, SINGLE LINE DIAGRAM,ELV system

Primary Roles & Responsibilities

•  The patching cabling between network equipment and client’s network
•  The installation of power cables from equipment to power supply in rack/cabinet/closet
•  The installation, troubleshooting and de-installing IT equipment (Servers / Network / Storage / etc) Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)
•  Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels
•  Act as interface between client’s associates and management
•  Provide hardware break-fix services for network infrastructure
•  Perform onsite call-through, data, voice, website and security testing
•  Perform back-up testing to ensure all systems are connected to the client’s network as directed
•  Support carrier testing of circuits
•  Assist with facilities efforts such as vendor co-ordination and vendor supervision - Power and uninterruptable
• power supply (UPS) restoral - Water problems, - Emergency cooling restoration, - Fire suppression exercises,
• restoration, and post fire events
•  Support inventory management activities - Receiving inventory, - Tagging of assets, - Tracking spares (crash
• kits), - Ordering inventory, - Updating inventory records, - Prepare and return damaged equipment
•  Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

•  Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.
•  Requires experience in working in communications closets
•  Must be able to perform rack and stack activities
•  Must be able to safely lift heavy objects
•  Must understand cable patching processes and procedures in copper and fiber
•  Experience in either or both CommScope and Corning structured cables (copper and fiber)
•  Must have a basic knowledge of data communications networking.
•  Must be able to assist in troubleshooting issues
•  Must understand network terminology
•  Requires good interpersonal communications skills
•  Must be able to explain technical issues in a way the client will understand an issue
•  Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements :

•  5+ years of experience in Data Centre operations and environment
•  Must have a basic knowledge of local and wide area networking.
•  High school Diploma or equivalent required

EA License no: 96C4864

Reg No: R23115903

A construction engineer is a civil engineer who oversees the design and construction of large building projects and works closely with architects and structural engineers to interpret building design plans and ensure that the project meets certain safety requirements.

A construction engineer is a civil engineer who oversees the design and construction of large building projects and works closely with architects and structural engineers to interpret building design plans and ensure that the project meets certain safety requirements. While they don't have direct involvement in the construction process, they're still responsible for ensuring that the process adheres to the proper construction standards and specifications. They manage multiple aspects of a construction project, including its budget and risk management processes. The infrastructure projects construction engineers assist with might include commercial or residential properties, roads, dams, bridges and airport runways.Related: What Is Construction Engineering?

What does a construction engineer do?

A construction engineer assists with construction projects to ensure that teams build in accordance with the proper plans and specifications. They also help maintain and repair infrastructure systems, such as roads, dams, water supply systems and buildings. They work with engineers and construction crews to organize and complete projects. Some of their additional responsibilities might include:

• Developing construction project budgets, ordering materials and collecting and organizing resources and personnel, including structural engineering employees, tools, machines and physical materials
• Operating machinery and using tools to design complex structures like hydraulic systems and using computer software to plan and design projects and conduct risk analyses
• Overseeing building progress and enforcing safety regulations at construction sites and submitting building permits to the proper authorities
• Assessing the viability and potential risks associated with a construction project

• Well Established Company
• Basic $3500 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Oversee outdoor and indoor repair tasks for all cleaning equipment
  Perform mechanical preventive maintenance, identify mechanical issues, replace spare parts, and carry out repairs
  Collaborate closely with service technicians to solve problems and coordinate tasks between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Possess experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492