Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Info:

• Monday to Friday 8 - 530
• Location: Ang Mo Kio

Responsibilities:

• Attend to customer enquiries and complaints, including on-site calls
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Assuage dissatisfied customers with prompt resolutions for any product or service issues
• Provide guidance and technical assistance to service teams and sub-contractors on service assignments, testing and commissioning; verify sub-contractors' jobs
• Remain actively involved in the implementation of department strategies and initiatives such as service value-chain businesses
• Update Service information system and follow up with all necessary paper work diligently, timely and accurately for smooth operation of the department

Requirements:

• Minimum 2 years of technical experience with knowledge in air-conditioning, chiller, ACMV or HVAC systems
• Resourceful with good analytical and interpersonal skills
• Strong communication skills
• Good team player with ability to lead and multi-task
• Possess Class 3 driving license will be an added advantage

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

EA License No: 24C2352
EA Personnel No: R24123724
EA Personnel Name: Tiffany Ng Xin Yi

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Due to expansion of our client's business, we continue to look for suitable candidates to work at our client's data centre site. Write to us if you are an individual who has experience in the activities listed below, and is keen to take up new challenges!

Responsibilities:

1. Planned Preventive Maintenance (PPM):

• Develop and implement PPM schedules for ACMV systems.
• Ensure compliance with manufacturers’ guidelines, safety standards, and regulatory requirements.
• Inspect and service chillers, cooling towers, pumps, air-handling units (AHUs), fan coil units (FCUs), ventilation fans, and duct systems, etc
• Monitor and maintain ACMV control systems.
• Manage the calibration of temperature sensors, humidity sensors, and pressure gauges.
• Maintain records of maintenance activities, equipment logs, and service reports.

2. Emergency Response/Corrective Maintenance:

• Develop and maintain contingency plans for system breakdowns or emergencies.
• Provide 24/7 technical support during critical issues, such as chiller breakdowns or BMS malfunctions.
• Diagnose and resolve faults or malfunctions in HVAC systems.
• Perform repairs on compressors, condensers, motors, pumps, and electrical components.
• Work closely with contractors or vendors when complex repairs are needed.
• Prepare detailed Incident reports for maintenance issues.

3. Spare Parts & Inventory Management:

• Manage inventory of spare parts, consumables, and tools.
• Coordinate with procurement for replenishing parts based on maintenance needs.
• Track equipment warranties and service contracts.

4. Coordination

• Engage with building managers and tenants to address ACMV requirements.
• Participate in site audits and inspections, ensuring quality and timeliness of maintenance work.
• Supervise on-site technicians, ensuring adherence to safety protocols and maintenance standards.

5. Compliance & Safety:

• Ensure all maintenance activities adhere to workplace safety and environmental standards.
• Conduct regular risk assessments and ensure compliance with local regulatory requirements
• Organize safety drills and routine inspections for emergency equipment like smoke extraction fans and pressurization systems.
• Ensure compliance with regulatory documentation, such as safety certifications and inspection records

Requirements:

• Diploma in Mechanical Engineering, Building Services, or equivalent.
• At least 1 year experience in ACMV system maintenance (e.g., chillers, AHUs, BMS).
• Knowledge of energy management and HVAC controls.
• Certification in workplace safety will be preferred
• Proficient in troubleshooting tools and preventive maintenance software.
• Ability to interpret engineering drawings and technical manuals.
• Good communication and coordination skills for client and vendor management

Please send your cv to

• [email protected]
• listing your personal particulars, education qualification and work experience;
• listing your current and expected salary details.

As we are hiring this position urgently, we do look forward to hearing from you VERY SOON!

Only shortlisted candidates will be notified.

EA Licence No: 22C1055

EA Personnel Registration No: R2095104

Due to expansion of our client's business,we continue to look for suitable candidates to work at our client's data centre site.Write to us if you are an individual who has experience in the activities listed below, and is keen to take up new challenges!

Responsibilities:

1. Planned Preventive Maintenance (PPM):

• Develop and implement PPM schedules for Electrical systems.
• Ensure compliance with manufacturers’ guidelines, safety standards, and regulatory requirements.
• Inspect and service Electrical Switchboard, circuit breaker, Protection relay etc
• Monitor and maintain Electrical control systems.
• Manage the calibration of power meters, current transformers, etc
• Maintain records of maintenance activities, equipment logs, and service report

2. Emergency Response/Corrective Maintenance:

• Develop and maintain contingency plans for system breakdowns or emergencies.
• Provide 24/7 technical support during critical issues, such as Electrical System down.
• Diagnose and resolve faults or malfunctions in Electrical systems.
• Perform repairs on cables, contactors, fuses, motors, and electrical controls.
• Work closely with contractors or vendors when complex repairs are needed.
• Prepare detailed Incident reports for maintenance issues.

3. Spare Parts & Inventory Management:

• Manage inventory of spare parts, consumables, and tools.
• Coordinate with procurement for replenishing parts based on maintenance needs.
• Track equipment warranties and service contracts.

4. Coordination

• Engage with building managers and tenants to address electrical requirements.
• Participate in site audits and inspections, ensuring quality and timeliness of maintenance work.
• Supervise on-site technicians, ensuring adherence to safety protocols and maintenance standards.

5. Compliance & Safety:

• Ensure all maintenance activities adhere to workplace safety and environmental standards.
• Conduct regular risk assessments and ensure compliance with local regulatory requirements
• Organize safety drills and routine inspections for emergency equipment like smoke extraction fans and pressurization systems.
• Ensure compliance with regulatory documentation, such as safety certifications and inspection records.

Requirements:

• Diploma in Electrical Engineering, Building Services, or equivalent.
• At least 1 year experience in Electrical system maintenance
• Knowledge of energy management and electrical services
• Certification in workplace safety will be preferred
• Proficient in troubleshooting tools and preventive maintenance software.
• Ability to interpret engineering drawings and technical manuals.
• Good communication and coordination skills for client and vendor management.

Please send your cv to

• [email protected]
• listing your personal particulars, education qualification and work experience;
• listing your current and expected salary details.

As we are hiring this position urgently, we do look forward to hearing from you VERY SOON!

Only shortlisted candidates will be notified.

EA Licence No: 22C1055

EA Personnel Registration No: R2095104

We are seeking a highly skilled and motivated Hotel Maintenance Technician to join our team and ensure the smooth functioning of our hotel properties. You will play a crucial role in maintaining the hotel's facilities to the highest standards and ensuring the safety and comfort of our guests and staff.

Job Description

Perform repairs & general maintenance work on various systems, including (but not limited to) M&E, plumbing & sanitary, air-conditioning, electrical/lighting, painting, and carpentry.

Troubleshoot issues and implement effective solutions.

Ensure compliance with building and fire safety regulations.

Follow established maintenance strategies and company policies for a safe environment.

Coordinate with other departments for smooth operations.

Communicate effectively with supervisors and colleagues regarding maintenance statu and issues.

Qualifications and Skills:

1 to 2 years of relevant working experiences in facilities & building maintenance.

ITE NITEC / Higher NITEC / GCE 'N' / 'O' Level / Diploma

Preferably to have hospitality background

A team player and the ability to work during weekends and on public holidays.

Job Description:

• Attend to all the maintenance & repair job required and ensure successful completion.
• Perform preventive maintenance in all production machines.
• Report and identify any defect or faults found during preventive maintenance.
• Perform routine maintenance, troubleshooting, and repairs on stamping presses, feeders, conveyors, and other related equipment.
• Inspect mechanical, hydraulic, pneumatic, and electrical systems to identify wear, damage, or potential failures.
• Develop and adhere to preventive maintenance schedules to minimize downtime and maintain equipment reliability.
• Conduct periodic inspections and adjustments to ensure machinery operates at peak performance.
• Use diagnostic tools, schematics, and blueprints to identify and resolve equipment malfunctions.
• Collaborate with engineering teams to implement effective solutions for recurring issues.
• Ensure proper operation of safety devices, sensors, and automation systems.
• Maintain detailed maintenance logs, repair records, and inventory of spare parts.
• Report significant issues, root cause analyses, and resolutions to supervisors or engineering teams.
• Ensure compliance with workplace safety regulations and company policies.
• Conduct regular inspections to verify equipment meets safety and quality standards.
• Suggest and implement process improvements to enhance equipment efficiency and reduce downtime.
• Participate in training programs to stay updated on new technologies and techniques in the industry.
• Any other duties as assigned by superior and/or management.

Requirements:

• Minimum NTC 3 in Mechanical/Electrical Fitting.
• Certification in maintenance and reliability (e.g., CMRP) is advantageous.
• 2–5 years of experience in maintenance within a stamping or manufacturing environment is highly desirable.

Responsibilities:

• Serve as the main point of contact for the maintenance project.
• Coordinate maintenance requests, receive instructions, and attend meetings.
• Ensure all works comply with the approved works program and methodology.
• Manage relationships with clients, contractors, and suppliers.
• Prepare and submit reports, quotes, and other required documents.
• Review and accept deliverables.
• Supervise the Maintenance Team.
• Arrange major contracts for services performed by sub-contractors.
• Establish service agreements, including leases and insurance for vehicles and policies related to maintenance work.
• Conduct regular reviews of the Maintenance Plan with the Project Manager.
• Submit monthly maintenance reports and attend all maintenance meetings.
• Plan and schedule routine preventive maintenance.
• Review the performance of routine preventive and corrective maintenance with Team Leads.
• Conduct regular reviews of Standard Maintenance Procedures.

Requirements:

• Relevant engineering/technical degree or diploma from a recognized university or tertiary institution.
• Must at least have 5 years of relevant working experience in the maintenance of IT or electronic systems.
• PMP certification required for diploma holders.

The Maintenance Technician is responsible for assisting in the maintenance of mechanical or electrical installations and equipment. Provides general assistance in the maintenance of the company’s plant, machinery, building and associated facilities. Carries out routine inspection and servicing of the company’s mechanical and electrical installations, building and associated facilities, refrigeration plants and air-conditioning units, plumbing and sanitary systems, machinery and equipment. Attends to complaints from users and carries out minor repairs. Monitors and keeps daily records of readings on various gauges, thermometers, pumps and other equipment and makes the necessary adjustments to correct any malfunctioning.

· Equipment in a safe and operational state of readiness at all times in order to fulfil daily operation requirements.

· Carry out preventive maintenance checks on allocated machines

· Carry out troubleshooting on the allocated machines to find the root cause and repair the defective machines to minimize downtime.

· Actively works on ongoing review, improve & monitor manufacturing capabilities to improve operational performance and efficiencies.

Requirements:

• ITE/Diploma in Electrical/ Mechanical related will be preferred
• Able to read, write and communicate in English
• Proficient in Microsoft Office preferred - outlook, excel & word
• Attention to detail and accuracy
• Has ownership and team player value
• Has Experience Industrial Electrical
• Clean up the work area after completion of the task

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Did you know KONE moves over one billion people every day? We employ over 60,000 driven professionals in over 60 countries worldwide joined together by a shared vision. As a global leader in the elevator and escalator industry, it is our mission to improve the flow of urban life.

Why this role?

KONE Singapore is embarking upon an exciting growth phase and as such we are seeking Maintenance Technicians to join our team in Singapore.

You will work in a small group of technicians attending fault calls, completing escalator/elevator repairs and servicing an allocated maintenance run.

Being part of a global organisation that actively supports your career and internal promotions, means that for the right person, this critical role could be the next step in a fantastic career at KONE.

What will you be doing?

• Responsible for accurate and real-time back reporting of work performed to ensure accuracy of customer notification
• Responsible for maintaining excellent relationships with customers
• Perform maintenance, repairs and installation in collaboration with other Maintenance Technicians
• Manages daily workload with minimal assistance from Supervisor
• Effective communication with all stakeholders
• Ensure safety at all times
• Depending on seniority, you may be required to give training/coaching to persons nominated by the supervisor

Are you the one?

• Minimum Certificate in Electrical, Electronic or Mechanical Engineering
• Possesses a service mindset
• Able to work in a fast-paced environment

What do we offer?

• Career progression in opportunities within a global organisation
• Total reward elements that engage and motivate our employees and help us make KONE a great place to work
• Comprehensive learning and development programs covering a wide range of professional skills

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Responsibilities:

• Conduct testing of equipment and systems
• Perform repair works on equipment and systems
• Monitor equipment and system condition
• Perform housekeeping of tools after maintenance and repairs
• Follow resourcing plans in support of engineering projects
• Operate equipment and systems in adherence to operational plans and Standard Operating Procedures (SOPs)
• Monitor equipment and systems performance
• Follow emergency response plans and relevant safety procedures
• Respond to emergencies as an emergency response team member
• Comply with the organisational Workplace Safety and Health (WSH) policies and Environmental Management Systems (EMS)
• Coordinate with contractors to ensure compliance with the organisational WSH and EMS standards and practices
• Report accidents and incidents in accordance with WSH and EMS standards and practices

Requirements:

• Higher NITEC/NITEC in Mechanical/Electrical Engineering/Building Services/Facility Technology or equivalent
• Minimum 1 year of relevant experience in building servicing and maintenance, preferably in hotel or serviced apartment environment
• Service-oriented
• Team player and able to work independently
• Willing to work on rotating shift, PH and weekends
• Fully vaccinated
• 5/6 days work week, 9 hours per day including 1 hour break

The Job Responsibilities:

- Responsible for performing outdoor & indoor repair, maintenance and troubleshooting work

- Where there is no outdoor repair, you are required to work within the Company workshop

What It Takes:

· Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, single-phase & three-phase, lead acid & lithium batteries, electrical control circuits, hydraulic system)

· minimum a year of customer support experience

· ability to work as part of a team and possess strong communication skills

· obtained local driving license is a plus

Job Description

• Industry/ Organization Type: Marine Spare Parts & Machinery Supplier
• Position Title: Marine Service Engineer
• Working Location: West – Gul Circle
• Working Hours: 5.5 days (Mon-Fri: 8 am-6 pm, every Sat: 8 am-1 pm)
• Salary Package: Up to SGD 5000 + Bonus + On-site allowance
• Duration: Permanent

Key Responsibilities

• In-charge of repair / service sales division
• Main Engine & aux engine repair, pumps, compressors, purifier and hydraulic at shipyard, working anchorage, OPL, follow voyage, PSA & Jurong port (ship owner, ship manager / Shipyard – DDW Pax ocean, ST Marine, Keppel / Industry – sewage treatment, Jurong & Kranji / Spares & equipment supplier / Engineer solution)
• Prepare & submit repair /service quotation to customer
• Get quotation from repairer
• Co-ordinate and arrange internal and external service team
• Co-ordinate between customer, agent & vessel for dispatching our teams to go onboard vessel to carry out repair/servicing job and or pre-work inspection
• Follow up with customer on status of our offer
• Co-ordinate with repairer & customer for any claims, dispute or complaint on work done or supply
• Prepare & submit inspection / service report to customer in accordance with ISO requirement & standard, filing of report is part of the job scope as per requirement
• Update & submit, sales report - quotation, enquiry against actual sale statistic report by weekly, monthly & yearly
• Co-ordinate between the sales team & production / service team for reconditioning work of stock item
• Coard vessel to meet Capt / Chief engineer for service & spares sales call & inspection in due course
• Carry out risk assessment for each service and observe safe work practice and regulations onboard vessels & in the workshop is part of the job responsibilities

APPLY NOW!!!

• Min. ITE in Marine or Mechanical Engineering
• Min. 3 years of working experience in the Marine industry
• Must have Hands-on experience on 2 & 4 stroke engines, purifiers, pumps, and air compressors
• Those with sailing experience are welcome

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66039 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

• Visit clients’ sites to perform servicing and maintenance on microscopes
• Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

Job Description

• Industry/ Organization Type: High Speed Networking Service Provider
• Position Title: Field Service Technician/ Engineer
• Working Location: Ubi (Nearest MRT: Tai Seng) – Company transportation provided to travel to client location
• Working Hours: Monday to Friday, 9.00 am – 6.00 pm
• Salary Package: Up to $3000 + OT (Dependent on project) + Performance Bonus
• Duration: Permanent

Key Responsibilities

Field Service Engineer

• Work as part of a team to install, test, and commission company equipment, ensuring all systems are fully operational and meet client expectations.
• Assist with the setup and configuration of network-based systems, ensuring connectivity and functionality.
• Set up and configure security surveillance systems and access control systems, ensuring proper functionality and client satisfaction.
• Install and maintain radio communication equipment, ensuring uninterrupted communication services.
• Regularly service and maintain installed equipment to ensure optimal performance, including troubleshooting and repairs when necessary.
• Assist in project planning, coordination, and execution, ensuring timely completion of assignments.
• Participate in on-the-job training under senior engineers, developing your technical skills and expanding your field of expertise.

Field Service Technician

• Perform accurate installation and laying of electrical cables to ensure proper connectivity, adhering to industry standards and safety protocols.
• Assist in the testing and commissioning of electrical systems, ensuring that all equipment is safely operational and meets performance standards.
• Conduct routine general maintenance on installed electrical systems and equipment to maintain optimal functionality and reduce downtime.
• Diagnose and fix electrical faults and malfunctions, ensuring that issues are resolved promptly to minimize disruptions.
• Follow all safety regulations and protocols to ensure a safe working environment, including the proper use of personal protective equipment (PPE).
• Work closely with other technicians and engineers to complete tasks efficiently and effectively, ensuring all project goals are met on time.
• Training & Development: Participate in ongoing training programs to stay updated on the latest industry trends, electrical techniques, and safety standards.

APPLY NOW!!!

• Min. NITEC in Electronic or Electrical
• 1 year’s experience working with security surveillance systems, access control, or radio communication equipment preferred
• Training provided for those without experience
• Class 3 driver’s license preferred

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040