We are seeking an engineer with opto-electronic product development experience, tasked with the mission of design, build and manufacturing of Si Photonics chips. The candidate must possess expertise in one of the following areas: opto-electronics, photonics, electronic circuit development, electronics board design, packaging design, or FPGA development.

Responsibilities

• Perform system-level optical and electronic test and measurements
• Prepare and develop prototype to products based on Photonics IC specifications and designs
• Source suppliers, establish supply chain and photonics manufacturing and collaborate with ODM/OEM/contract manufacturing partners

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• At least 2 years of working experience
• Candidate is expected to have experience in any one of the following areas: circuit and system, FPGA Development, or Advanced Packaging
• Experience in commercial Si Photonics product design and product engineering is preferred.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job description

• Experience in UVM verification methodology
• Experience in developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

· Ability to present ideas in business-friendly and user-friendly language appropriate to both executive and managerial audiences.

· Ability to effectively manage relationships with other implementation teams, application teams, stakeholders, business and customer representatives.

· Organizational skills with attention to task details, documentation and target dates.

· Strong written, oral, and interpersonal communication skills.

· Team orientated, willing to share knowledge and collaborate with peers.

· Proven analytical, strategic vision drawing on strong problem-solving abilities.

· Able to prioritize and execute tasks in a high-pressure environment. ·Ability to conduct research into server, storage, virtualization issues, standards, and products.

Requirement:

· VMWARE Cloud, Virtualization, Server and Storage vendor Certifications Preferred.

· 10+ years of previous Implementing / Architecting & virtualization experience, across multiple vendor and technologies.

· In-depth understanding of Cloud, Server, Storage, and Virtualization architecture design techniques, theories, principles, and practices.

· Solid experience in implementing enterprise Cloud, Virtualization, Server and Storage systems within a broad spectrum of technologies.

EDUCATION/CERTIFICATION / KNOWLEDGE:

· Excellent Knowledge of Private, Public and Hybrid Cloud environments

· Excellent Knowledge of Cloud Orchestration platforms

· Intermediate knowledge of Windows Server, Linux, in HA/DR type configurations.

· Excellent knowledge of Sever hardware platforms: x86

· Excellent knowledge & working experience of VMWare ESXi, vSphere, vSAN, vRA, VRO, VROPs, vRLI, NSX-T, Horizon View

· Excellent knowledge of SAN, NAS, DAS, RAID, SCSI, Fibre Channel, Backup to Disk, clustering, encryption technologies from multiple vendors.

· Should be extremely proficient in PowerShell, Shell scripting / Python / Ansible development

Job Responsibilities:

· Over-all project management, which includes planning and implementation of assigned projects.

· Site feasibility & Solar Systems Design and complete execution.

· Complete system designs for PV projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of BOS location and interconnection details, and labelling.

· Planning and monitoring of progress and timely completion of projects which includes preparation of detailed progress and status reports.

· Coordination with clients & consultants to ensure smooth communication.

· Provide support to technical design, review and approve engineering drawing submissions.

· Ensuring smooth procurement process and timely deliveries, which includes preparation of status reports.

· Provide technical support during installation, testing and commissioning.

· Attending site meetings for smooth coordination

Requirements:

· Minimum Degree in Electrical/Electronic/Microelectronic/Mechatronic/Green Building & Sustainable or related engineering degree.

· Minimum 2 year of experience in engineering field

· Computer knowledge in Auto CAD.

· Ability to plan & monitor project progress to ensure timely completion

· Ability to communicate with clients & consultants · Willingness to learn & improve personal skills through team work

· Knowledge in basic project management e.g. preparing monthly project reports, site planning, monitoring & control processes and project risk analyses.

· Good work ethics and team player

· Knowledge in Solar system design and electrical engineering fields

· Knowledge in PV Solar and software of PVsyst

Responsibilities

• Administer, upgrade, maintain high availability, performance, and security of Linux, Windows, storage clusters, virtualization clusters (VMWare and Kubernetes), and critical middleware services.
• Oversee, monitor, improve infrastructure and critical services health through performance optimization, security hardening, patch management, service updates, and scalability assessments.
• Drive the adoption of automated practices such as Infrastructure as Code (IaC) for provisioning, configuration, and maintaining infrastructure.
• Develop, maintain, improve automation scripts and tools to streamline continuous integration (CI) pipelines and deployment processes for software development and IT operations.
• Design and implement monitoring solutions or observability tools to track infrastructure performance, logs, and application health.

Requirements

Educational Background:

• Diploma, Degree or higher in Computer Engineering, Computer Science, Engineering, Information Technology, or a related technical field. Advanced certifications are a plus.

Professional Experience:

• Minimum 6 years of hands-on, professional experience in IT operations, infrastructure management, software development, or a closely related field.

Technical Skills:

• Proven experience in managing and supporting critical services across Linux, Windows, and middleware platforms.
• Strong background in Linux administration and management.
• Strong expertise in Windows Server administration, including AD, GP, Windows-based infrastructure services.
• Extensive experience in virtualization platforms (ESXi) and container orchestration (Docker).
• Hands-on experience in network and software-defined storage technologies (Ceph, NAS, NFS).
• Proficiency in CI/CD processes, automation tools (GitLab CI, Jenkins), deployment workflows.
• Knowledge in infrastructure monitoring, alerting, logging tools (ELK Stack, Grafana, Loki, Prometheus).
• Experience in Infrastructure as Code (IaC) tools (Ansible, Chef, Puppet).
• Strong willingness to learn, collaborate, and contribute to continuous improvement.

Preferred Skills

• Proficiency in scripting and automation with Bash, Python, Shell, PowerShell, Go, YAML.
• Strong knowledge of security protocols and best practices in infrastructure management and DevOps.
• Familiarity with hardware storage technologies (DAS, FC, iSCSI, RAID, SAS, RAID).
• Experience with common IT integrations (LDAP, SIEM, SMTP, REST).
• Knowledge in CI/CD methodologies and tools.

What We Offer

• Competitive salary, bonuses, attractive benefits package.
• A flat hierarchy with minimal bureaucracy, where all technical leads are also hands-on.
• Freedom to pursue your interests within reason.
• Learning opportunities through courses, seminars and conferences.
• A stable working environment with flexible hours.
• A chance to make a meaningful impact on society through your work.

We are seeking highly motivated Semiconductor Laser Scientist/Principal Engineers to join our team and contribute to the development of innovative chip-based laser solutions for laser-to-silicon photonics applications. The successful candidates will play a pivotal role in driving the design, development, and optimization of on-chip semiconductor lasers for Si photonics applications, collaborating with external fabs, universities, and research institutes.

Responsibilities

• Develop innovative on-chip laser solutions for advanced silicon photonics applications
• Develop and optimize on-chip laser fabrication processes, including epitaxial design, wafer processing, and packaging
• Contribute to the development of innovative laser fabrication techniques and technologies, such as heterogeneous and hybrid integration of lasers with silicon photonics platforms
• Collaborate with external fabs and research institutes to ensure efficient and cost-effective fabrication of high-quality laser devices
• Collaborate with cross-functional teams to integrate lasers into complex photonic systems
• Support the transition of laser products from research to commercialization

Qualification

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• Minimum 2 years of experience in semiconductor laser development or a related field
• Strong understanding of semiconductor laser physics, device design, and fabrication processes
• Experience with laser characterization and measurement techniques
• Proficiency in using simulation tools (e.g., Lumerical) for laser design and analysis
• Knowledge of packaging and integration technologies for semiconductor lasers and silicon photonics
• Experience in laser-to-silicon photonics applications
• Experience in commercial Si Photonics product design and product engineering is a plus.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

5. Commissioning (Cx) Engineer – Mechanical, Data Centre MEP

Role: Supports the lead mechanical commissioning engineer by conducting tests and inspections of mechanical systems critical to data center operations.

Key Responsibilities:

Assist in the commissioning and performance testing of mechanical systems, including chillers, cooling towers, air handling units, and CRAC units.

Perform functional tests of HVAC and cooling systems, ensuring compliance with design specifications and environmental requirements for continuous operation.

Document mechanical system test results and prepare reports for the Cx Lead Engineer.

Assist in troubleshooting mechanical issues, ensuring systems are optimized for redundancy and cooling performance.

Ensure that all mechanical systems meet the data center’s performance, efficiency, and reliability standards.

Skills Required: Knowledge of HVAC and cooling systems for data centers, mechanical testing and troubleshooting skills, ability to follow detailed commissioning procedures, and attention to detail in documentation.

Commissioning (Cx) Engineer – Electrical, Data Centre MEP

Role: Supports the lead electrical commissioning engineer in performing testing and validation of electrical systems critical for data center operations.

Key Responsibilities:

Execute electrical system testing, including functional tests of UPS systems, power distribution units (PDUs), switchgear, and emergency power systems.

Document test results and assist in producing comprehensive commissioning reports for electrical systems.

Support troubleshooting efforts during commissioning to resolve any performance issues in critical power systems.

Ensure that electrical components are installed and functioning according to design specifications and operational needs of a mission-critical data center.

Work closely with the lead electrical engineer to ensure all electrical systems meet performance, safety, and redundancy standards.

Skills Required: Knowledge of electrical systems in data centers, experience with testing high-voltage and backup systems, attention to detail, and technical documentation skills.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore. Be accountable for individual sales target to be determined by the Company.

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor etc.

• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.

• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.

• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.

• Track and report sales activities; submit weekly and monthly report promptly.

• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.

• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.

• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.

• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.

• Working closely with customers to find application possibilities and propose suitable technical solutions.

• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.

• Conduct product and application training.

We are looking for a Software Engineer who are inquisitive self starters that are able to thrive well in ambiguity who enjoys being at the forefront of a revolution in technology. You will be challenged with solving complex problems daily. If you are passionate about the future of decentralized finance, with strong desire to leave your mark on the Web 3.0 space, we want you!

Responsibilities:

• Design, architect and implement core features and peripheral contracts
• Design and write thorough unit and integration tests to test the developed smart contracts under various scenarios to ensure the dApp security
• Research and explore other protocols and programming models
• Maintain well-written documentation for internal and external users
• Improve development tooling and productivity in the smart contract team
• Participate in public protocol discussions on Discord or Twitter

Requirements:

• 1+ years of experience in writing smart contracts (in either Solidity, Rust, or equivalent) that have been deployed to a production mainnet.
• 4+ years of experience in software engineering. Able to develop backend and automation scripts in Typescript, Javascript, Shell and/or Python.
• Have good knowledge of data structures and optimisations
• Proficient in verbal and written communication in English
• Remote friendly but must be willing to work around GMT +8 Timezone Primarily

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

OVERALL PURPOSE OF THE ROLE:

• Participate in the development of the T&C procedures and adequate method statements based on defined specifications from the system and sub system design to meet the contractual requirements.
• Prepare, manage and lead the on-site execution of the T&C activities until final handover to the authority.
• Coordinate and lead the execution of the Integrated T&C activities (external interfaces tests) with the participating E&M contractors. • Execute the on-site testing based on the approved subsystem procedures and Method Statements.
• Troubleshoot and provide preliminary investigations report on faults identified during the site testing.
• Perform testing and reporting activities consciously with quality,
• Maintain a close coordination with the different internal stakeholders such as Engineering, Installation, V&V and metiers experts to secure the delivery of the Signalling System under commissioning.
• Ensure the application of all EHS Golden rules (AZDP) during T&C activities.

S/he reports functionally to the ATS T&C Leader and hierarchically to the T&C Manager. Maintains a close relationship with the others members of the T&C and V&V teams.

QUALIFICATIONS & SKILLS:

EDUCATION
• Bachelor degree in Engineering or equivalent experience

TECHNICAL COMPETENCIES & EXPERIENCE

• Minimum of 2 years relevant experience in engineering, V&V, T&C or maintenance for railway signaling,
• Knowledge in deployment processes of Driverless Signaling systems (or with similar complexity),
• Good knowledge in Signaling environments and railway operations principles,
• Ability to define the testing principles leading to the preparation of the tests plans and/or procedures and reports, ability to define acceptance criteria,
• Experience in leading the troubleshooting of complex issues involving various internal and external systems. Relevant experience in commissioning of complex systems (ATS, SCADA or similar),
• Knowledgeable in OPC client-server architectures, XML, COM/DCOM, Database (MS-SQL), Windows HMI design, basic network configuration, and operating systems fundamentals,
• Knowledgeable in common programming and scripting languages,
• Experience in software testing and problem troubleshooting.

2. Commissioning (Cx) Lead Engineer – Electrical, Data Centre

Role: Leads the commissioning of all electrical systems within the data center, ensuring compliance with design standards and optimal performance for mission-critical operations.

Key Responsibilities:

Develop and implement detailed commissioning procedures for all electrical systems, including backup power systems.

Oversee testing and validation of high-voltage systems, low-voltage distribution, switchgear, UPS systems, generators, transformers, and battery systems.

Coordinate with the design, construction, and operational teams to ensure electrical systems meet redundancy, efficiency, and uptime requirements specific to data centers.

Prepare commissioning reports, test results, and electrical system performance documentation.

Troubleshoot complex electrical systems and propose solutions to ensure optimal system performance.

Ensure adherence to Tier standards (Uptime Institute) and other applicable codes for data centers.

Commissioning (Cx) Lead Engineer – Mechanical, Data Centre

Role: Leads the commissioning of all mechanical systems within the data center, with a focus on achieving optimal cooling and environmental control essential for data center operations.

Key Responsibilities:

Develop and implement mechanical commissioning procedures .

Ensure systems are tested for cooling redundancy and efficiency, meeting stringent uptime and temperature control requirements.

Oversee performance testing of cooling systems, including airflow management and pressure tests to prevent hotspots and optimize cooling efficiency.

Collaborate with design and operations teams to ensure mechanical systems align with energy efficiency, environmental, and operational goals of data centers.

Troubleshoot and optimize complex mechanical systems to ensure high reliability and continuous operations.

Provide technical reports on system performance and recommendations for mechanical systems' long-term operation.

Familiarity with ASHRAE data center cooling guidelines.

Responsibilities:

1. The primary role is to serve our salespersons or clients at the customer service counter or reception counter.

2. Process documents, collect commission (cash, cheque or online payments), sale of merchandise, use POS system, and handle office equipment (nets/credit card machines, copier machines, and computer terminals at the free seating area).

3. Data entry using our in-house systems (REMSPlus2, Admin module, e-submission) and using external systems (IRAS, HDB, CEA).

4. Manage walk-ins, emails, and telephone enquiries.

5. Frank mail and deposit at SingPost.

6. Collect and distribute mail.

7. Open and close the office, meeting rooms and training rooms.

8. Perform any other ad-hoc duties as and when assigned.

Requirements:

1. GCE ‘O’ Level and above.

2. Preferably someone who has work experience in customer service duties.

3. Excellent phone etiquette and possess good communication skills.

4. Ability to multitask and handle high volume of customers efficiently.

5. Computer literate in Microsoft Office.

6. Preference will be given to candidates who are available immediately or within short notice.

Benefits

· Friendly and Progressive Work Environment.

· Great Career Progression.

· Work from Home Leave

· Annual Leave up to 21 days

· Festive Leave

· Birthday Leave & Birthday Voucher

· Dress Code : Smart Casual

Other Information

· Working Location : Toa Payoh, (HDB Hub near Toa Payoh MRT Station)

· Five (5) day work week, Monday and Friday : 8.30am to 5.30pm, 9.00am to 6.00pm, 9.30am to 6.30pm (With 1 Hour Break)

Interested candidates are invited to submit a comprehensive resume, stating the current and expected salary, date of availability via APPLY NOW button.

We regret that only shortlisted applicants will be notified.

Job Description -

Responsible for providing coordination between production and customer’s’ requirements and other administrative assistance to Sales Department to ensure smooth day-to-day operation of sales and business development.

· Effectively manage a large number of incoming enquiries on all e-commerce platforms and social media channels, phone calls, and ensure that issues are resolved both promptly and thoroughly.

· Process all digital sales orders placed on e-commerce platforms and social media channels

· Identify and assess customers’ requirements and needs

· Keep records of all customer interactions

· Enhance customers’ experience to all social media platforms

· Communicate with IT, sales and operation departments to fulfil orders

· Assist on research, implementation and coordination on all online sales and marketing strategies and ad campaigns

· Provide copywriting for all online sales and marketing strategies and ad campaigns

· Assist in inventory management and stock replenishment. Upkeep and make visible data to all stakeholders.

· Provide administrative and operational support

Job Requirements -

· Min ‘O’ level or similar and relevant experience

· Possess positive customer service orientation

· Good communication and interpersonal skills

· Possess pleasant personality

· Proactive, team player and sales-oriented

. Positive attitude, hardworking and willing to learn

As a Senior Package Design Engineering (PDE) Central Engineering System and Analytics (CESA) Engineer, you will develop integrated solutions to empower Backend Operations to make data-driven and heuristics-based decisions. You will work across Global Operations and sites to improve Cost, Scale, Quality, and Cycle Time by defining and designing data architecture and collaborating with key partners.

Responsibilities

• Yield Enhancement (YE) lots analysisLead YE lot analysis including reconstructing fuse identififaction (FID) for traceability, statistic comparison for different group
  
• Yield modelling / pareto benchmarkingIdentify actionable opportunities from YE lots
  Develop and improve Yield Models for HBM
  Periodically improve models based on actual performance
  
• Best Known Methods (BKM) DeploymentDevelop BKM’s for YE and drive implementation
  Identify/align BKMs and monitor implementation
  Works with different teams in the identification of critical metrics

Requirements:

• PhD/Masters/Bachelors in Statistics, Mathematics, or a related field; advanced degree preferred.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields
• Preferably with experienced in Package Design Engineering and Yield Enhancement
• Strong understanding and knowledge of semiconductor manufacturing processes and technologies.
• Proficiency in statistical/machine learning and statistical techniques skills will be additional advantageous;
• Experience in MRDA will be a plus
• Proven ability to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to see opportunities.
• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.