This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

Role:Service Desk Engineer L1

JD:

Must have Talent / Skills
• Minimum a diploma in Information Technology or equivalent
• Minimum 1 year of relevant working and technical IT experience
• Pleasant disposition and good social etiquette with good spoken and written English
• Good telephony and problem solving / troubleshooting skills
• Good customer service attitude
• Process Driven
• Able to liaise with Customer for daily operations
• Minimum a diploma in Information Technology or equivalent
• Minimum 2 years of relevant working and technical IT experience
• Pleasant disposition and good social etiquette with good spoken and written English
• Good telephony and problem solving / troubleshooting skills
• Good customer service attitude

Stork Gears & Services Asia Pte Ltd are an ISP for Rotating equipment from Europe which focuses mainly on Inspections, Repairs, Modifications and Overhaul of Gearboxes for both the Marine and Land based Applications. We have an OEM background, Rademakers, Conrad, Brevo, Kuypers, Jahnel Kesterman, but with an Independent service provider mind-set.

Stork is known for:

• Highly qualified and experienced engineers
• Highly Price competitive vs OEM
• In-house manufacturing critical parts
• On-site reverse engineering

Our service portfolio consists of:

• Diagnostics services
• Onsite services 24/7
• In-house engineering: design of gearboxes,
• Parts manufacturing (Impellors, shafts, gears)
• Custom built
• Workshop repair

Job description: (Field) Service Engineer

Purpose of the job

Responsible for the technical realization of projects, during the disassembly, assembly, inspection and repair, installation and commissioning of equipment, installations and related components.

Characterization

• Performs assignments/projects on the basis of requests from the project manager and project planning.
• Technical lead of the project team consisting of mechanics, (field) service engineers and subcontracted staff.
• Is responsible for maintaining the overview and ensures that the project is executed safely, in a structured manner, with a high quality standard and within planning and budget.
• Projects are performed at client sites (worldwide) or in the workshop. Often under time pressure and in unexpected or hectic circumstances.
• Flexibility: reachable and deployable, also on irregular hours.
• Realizes the most optimal technical solution and report on progress and the (technical) end result to the customer.
• Fulfills a leading role in respect of compliance with safety and environmental instructions, guidelines and policies of Stork and the client.
• Is highly specialized in installation & equipment technology and product knowledge.
• Service—oriented professional.

Tasks/Responsibilities

1. Authorizations

• Independently performing inspections, measurements, repairs, disassembly and assembly of installations, equipment and related components.
• Authorized to operate specialist machines and tools.
• Competent to specialist work based on required training.

2. Execution

• (dis)Assembly, inspection and repair of installations, equipment, related components and connected installations onsite, according to work instructions. Sets priorities on location and specific approach to the work; on site troubleshooting.
• Searches for the technical optimal solution with regard to costs and downtime.
• Responsible for the overview of the progress of the project on-site, ensuring that the project is carried out safely, in a structured manner, with a high quality standard and within planning and budget.
• Communicating the status and progress of the project to the project manager, adequately reporting possible scope changes.
• Self-starting and able to fully prepare, execute and complete the work independently both technically and administratively.
• Can deal very well with tight deadlines and can very well structure work in hectic and/or unexpected circumstances.
• Makes adequate protocols (if necessary) and technical reports.
• Works closely with other relevant departments so that the project can be delivered to the customer in accordance with the scope.
• Monitor and manage technical intellectual property if appropriate.
• Technical assistance and advice to internal and external stakeholders on use, maintenance, repairs, risks and possibly renewal of the installation.

3. Leading the team

• Managing the project team (on-site), ensuring that the project is carried out safely, in the agreed manner, with high quality and within the agreed timeframe.
• Detection of deviations, intervening if a deviation is detected.
• Coaching, supporting and guiding the project team on-site.
• Responsible for timely and adequate internal and external reporting and administration.
• Making and/or supervising correct use of: tools, machines, measuring instruments and other means of production.
• Maintaining equipment in good condition under applicable norms and regulations, timely reporting and/or solving in case of imperfections and malfunctions.
• Proactive in personal development and knowledge sharing within the team and organization.

4. Safety, quality and environment

• Is accountable for safety and quality aspects within the project.
• Meeting and monitoring the correct safety measures for a safe working environment.
• Report safety incidents and / or near misses in accordance with applicable procedure.

5. Others

• Responsible for maintaining contact with the client at an operational level.
• Actively participate in realization of additional work during development and execution of projects, technically assisting the sales department.
• Proactive relationship management; as ambassador encourage clients to purchase more services and / or products.
• Keeps knowledge up to date within his area of expertise (i.e. through keeping track of technological developments and/or professional literature).
• Assists in development of and test new methods, techniques and new services.

Knowledge and Skills

• Relevant technical education, i.e. mechanical engineering
• Relevant technical education; mechanical engineering or related
• Preferably services background
• Possesses required certifications
• Able to read schedules and mechanical engineering drawings
• Use and application of auxiliary tools and measuring instruments
• Fluent in English

RESPONSIBILITIES

• Provide comprehensive range of technical after-sales service support, installation, commissioning and repair plus preventive maintenance plans for scientific and/or biopharmaceutical equipment;
• Provide technical consultation to customers; with a focus on the refrigeration system;
• Respond to customers’ requests by troubleshooting problems and taking corrective actions within targeted timeline;
• Prepare service reports.

REQUIREMENTS

• ITE/Higher NITEC/Diploma/Degree in Electronics, Electrical, Mechanical Engineering or equivalent
• Minimum 3 years of relevant technical work experience in service/ maintenance in scientific or biopharmaceutical industry
• Possess good understanding of refrigeration systems
• Excellent communication and interpersonal skills;
• Able to work independently and a team player;
• Self-motivated, results-oriented individual with good business acumen;
• Valid Class 3 driving license and personal vehicle will be an added advantage

Next Steps:

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Garrett Lim Jun Jie, R24122758

EA Licence No: 24C2293

Job Responsibilities:

· Contractors management

· Create and Foster conducive environment for attracting, retaining and developing Service Partners

· Interview & provide training to engineers in technical skills

· Administrative support e.g. Patching, verifying of service reports & invoicing

· Follow up payment with Service partners

· Develop program to accelerate repair sales and contract retention from Service Partners

Requirements:

· Diploma/Degree in Mechanical Engineering

· Minimum 2 years of technical experience with knowledge in air-conditioning, chiller, ACMV or HVAC systems

· Experience supervising subcontractors

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Location: Ubi (Near MRT)

Salary: $2,500 - $3,000 per month (depending on experience)

Work Schedule: 5 days a week

Job Responsibilities

• Prepare and provide quotations for our products.
• Manage the packing and unpacking of products, ensuring they are handled safely.
• Check and repair products as needed to ensure quality.
• Install products at client sites and provide training on their operation.

Requirements

• Diploma in Mechatronics, Mechanical, or Electrical Engineering.
• 1-2 years of relevant experience.
• Strong organizational skills, attention to detail, ability to work independently and meet deadlines.

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

1,Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner.

2. Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.

3. Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level 4. Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

5. Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

6. Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Job Summary

The technician will assist with maintenance and repairs of electrical, plumbing, heating, ventilation, and air conditioning (HVAC), carpentry, painting, and other building systems.

Duties & Responsibilities

• Assists with the day to day operations of the maintenance department
• Evaluates systems or facilities to determine maintenance or repairs that need to be performed
• Assesses building systems to plan work assignments and project schedules
• Develops maintenance procedures and schedules
• Ensures maintenance and repair work is completed correctly and in a timely manner
• Assists with departmental budget estimates and costs of specific repair projects
• Performs other related duties as assigned

Required Skills & Abilities

• Extensive knowledge of building systems such as plumbing, electrical, and HVAC
• Excellent analytical and problem-solving skills
• Ability to identify issues and determine repairs that are needed
• Ability to plan maintenance schedules for building systems
• At least two years of maintenance experience required

Physical Requirements

• Must be able to traverse property and facility to diagnose building issues and plan repairs or maintenance
• Must be physically able to perform repairs when needed
• Must be able to lift 25 pounds at a time

The Opportunity

• Permanent role with a provider of medical and safety technology solutions
• Work location: West Region
• Work hours: Monday- Friday, 8.30am - 5.30pm
• Salary up to $3500 with AWS & VB

Adecco is collaborating with a Provider of medical and safety technology solutions. They provides cutting-edge medical and safety technology, offering solutions for healthcare, industrial safety, and workplace infrastructure, ensuring optimal performance, reliability, and protection across diverse environments.

They are looking for an Assistant Facility Maintenance Engineer to join their growing team. The ideal candidate for this role should have the experience in medical or workplace infrastructure, adept at equipment installation, maintenance, customer service, service contract management, and safety. If you are seeking to further your career in a dynamic environment, we encourage you to apply!

The Job

• Install and provide basic technical training on Workplace Infrastructure (WPI) products, including Medical Pendants, Lights, and Gas Management solutions.
• Conduct warranty services, corrective repairs, and maintenance visits, ensuring equipment stays functional and up-to-date via factory Technical Service Bulletins.
• Support sales and marketing activities, such as congresses, exhibitions, demos, and workshops, to enhance service reach.
• Escalate quality issues, market dynamics, and field-related concerns to the Service Management team for resolution.
• Monitor and complete monthly maintenance tasks, ensuring timely submission of documentation and adherence to SOPP for data hygiene and hours tracking.
• Develop and implement service contracts, striving to meet revenue targets while ensuring customer satisfaction and workplace safety compliance.

The Talent

• Minimum qualification: ITE in Engineering/Electronics or equivalent.
• 2-3 years of technical experience, preferably in after-sales support for medical or Workplace Infrastructure products.
• Expertise in handling Pendants, Surgical Lights, Medical Gas, or Industrial Refrigeration systems, including hospital compressors or related equipment.
• Class 3 driving license is preferred.
• Proficient in customer service skills, Microsoft Office, and IT-related networking skills.
• Strong ability to multitask, meet deadlines, and ensure compliance with safety standards.

Next Step

• Prepare your updated resume (please include your current salary package with a full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Apply through this application or send your resume to [email protected] in MS Word Copy. We'd love to hear from you!
• We regret that only shortlisted candidates will be notified.

Primary Objective(s) of Position
• Manage key phases of projects such as assembly, testing, installation, pre-commissioning, commissioning, troubleshooting, repairs and maintenance for the marine, power generation, petroleum, construction and industrial market segments.
• Responsible for product service support related work on both diesel and gas engines.
• Support the design and development of other aspects of projects, when required, including tendering, contract review, design, drawing, scheduling, purchasing, packing and shipment of marine and oil and gas engines, and respective associated propulsion and / or power generation systems, as per customers’ requirements.

Duties & Responsibilities
• Perform installation audit checks on engine set-ups at site and ensure equipment installations are according to manufacturer guidelines/recommendations, and generate report, as required.
• Perform pre-commissioning, commissioning and sea-trial activities (where applicable) at customer sites (in Singapore or overseas) to ensure proper equipment operation as per equipment manufacturers’ guidelines / customers’ requirements.
• Perform supervision of the assembly and packaging of engine and generator set packages at the workshop, inclusive of inspections and testing, as and when required.
• Configure engine settings and parameters to meet specific requirements.
• Utilize diagnostic tools, software and technical manuals.

Duties & Responsibilities (Cont’d)
• Investigate engine malfunctions, diagnose issues and identify root causes.
• Interpret error codes, schematics, and technical manuals to pinpoint root causes of engine malfunctions.
• Propose and implement effective solutions to resolve problems.
• Supervise the disassembly and reassembly of engines for repairs and overhauls, when required.
• Supervise the replacement of faulty components, bearings, seals and gaskets.
• Calibrate and fine-tune systems for optimal performance.
• Conduct functional tests of repaired or newly installed mechanical and electrical systems.
• Perform dyno / load testing on engines and generator set packages.
• Maintain accurate records of inspections, repairs, maintenance activities and testing results.
• Generate technical reports and service documentation for customers and internal use.
• Conduct on-site familiarisation training to operators, when required.
• Provide remote or on-site assistance for troubleshooting, technical support and guidance to customers.
• Attend / Conduct engineering and project meetings and on-site inspections both in Singapore and overseas (when required).
• Adhere to safety protocols and regulations while working on engines to prevent accidents and ensure a safe working environment.
• Other ad hoc tasks as assigned by management.

Person Specifications
• Possess a diploma/degree in Mechanical or Automotive Engineering.
• At least 2 to 3 years of working experience in related industry.
• Strong understanding of diesel and gas engine principles, components and systems.
• Proficiency in diagnosing and troubleshooting engine issues.
• Able to read and interpret technical manuals, schematics and engineering drawings.
• Attention to detail and commitment to safety.
• Good problem-solving skills and attention to details.
• Effective communication skills for interacting with customers and colleagues.
• Ability to work independently and as part of a team.
• Must be able to travel overseas as and when required.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Brilliant Engineering Pte Ltd

Office at LINK@ AMK

Service Engineers - 1 post

S$2600 to 3000 / month

Preferably with 3 to 5 years of relevant experience.

Job description

Overview

Brilliant Engineering Pte Ltd is a diversified engineering company specialise in providing MEP System Maintenance Services such as Air Conditioning, Electrical, Fire Protection & Plumbing system. Our list of Clientele ranges from Tourist Attractions, High Class Hotels, Retail shopping malls, Corporate MNC and Technology Companies and F&B restaurant.

Are you a dynamic, enthusiastic, and driven engineer looking to make a significant impact? Our company is seeking an energetic Assistant Service Engineer to join our team. In this role, you will be responsible for managing and engagement with a list diversified clients to carry out maintenance or A&A project work to the Engineering System.

Key Responsibilities:

- Key Point of Contact for the assigned clients.

- Ensure M&E Equipment are well maintain to minimize downtime due to breakdowns.

- Preparation of Quotation for Repair & Project work

- Collaborate with team members to brainstorm, plan, and execute engineering projects.

- Utilize your technical expertise to solve complex problems and drive innovative solutions.

- Actively participate in all stages of M&E Project

- Demonstrate a proactive approach to learning and staying updated on industry trends and advancements.

- Effectively communicate with stakeholders to gather requirements, provide updates, and address concerns.

- Foster a positive and collaborative work environment by sharing knowledge and supporting team members.

- Provide Supervision to a Technicians and Supervisors, ensuring the high standard of deliveries in terms of service standard, best engineering practice and Safety

- Provide Supervision to the Engineering team to ensure they conform to BEPL’s standard in terms of Servicing, Repair and Project Works

- Management of Sub-Contractors in repair, new projects and new installation (if necessary)

Qualification

- Diploma in any Engineering discipline or related field.

- 3 to 5 years of experience in Facilities/Building Services or any relevant Mechanical & Electrical related field.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to thrive in a fast-paced, dynamic environment.

Technical Knowledge

- Will require the candidate to have Basic Technical Knowledge in the Mechanical and Electrical field, namely Air-Conditioning and Electrical Systems.

- Preferably with 1 to 2-years of relevant technical field application.

- Please submit your CV with current salary, expected salary and earliest join date. We do not consider if there is no salary details indicated in your CV.

Job Description

• Industry/ Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

- To report to Head of the Department for daily job assignments.

- Carry out inspection, installation, testing, commissioning, servicing, maintenance and troubleshooting for the assigned jobs that include but not limited to:

· Electrical works

· PLC Controllers/Modules

· BMS/SCADA

· HMI

· A/C Works

- Provide internal & external trainings on electrical controls, electrical troubleshooting, PLC program writing & troubleshooting, control panel assembly and basic electrical theory.

- Produce Progress Tracking Report (PTR) for assigned jobs.

- Report and communicate with customers and Oceanmaster PIC the technical issues, status, progress and recommendations of the assigned job.

- Submit to Operations Administrator an accurate and duly signed & stamped Timesheets, Work Reports, Commissioning Checklists (if any) and Customer Satisfaction Survey Forms on every completion of assigned job.

- Produce Close-Out Report after completion of the assigned job.

- Comply with quality of work requirements of OceanMaster at all times.

- Comply with protection of environment and health & safety policies of OceanMaster at all times.

- Adhere to no wastage policy of OceanMaster in terms of materials and labour to assigned jobs at all times.

- All other duties assigned by the Managements as and when necessary.

Requirements

- Graduate of Electrical Engineering or Electronics Engineering (Bachelor’s Degree)

- Minimum 5 year experience in Marine Electrical field

- Minimum 3 year experience in Instrumentations and PLC handling and installation

- Proficient in Electrical, instrumentation and/or Electronics troubleshooting

- Proficient in written and oral English communication skill

- Proficient in material take off and labour estimate for a given Electrical project

- Proficient on electrical circuit diagram design

- Good knowledge on ladder logic programming

- Good grasp on technical writing

- Good leadership, coaching and analytical skills

- Able to work independently

- Team player

- Knowledge on Project Schedule Software or Autocad is an advantage

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

• Installation and Commissioning:Install, configure, and calibrate equipment and systems according to specifications.
  Conduct system testing to ensure proper functionality.
  
• Maintenance and Repair:Perform routine and preventive maintenance on equipment to ensure optimal performance.
  Diagnose and resolve technical issues promptly to minimize downtime.
  Replace or repair defective components, parts, or systems.
  
• Technical Support:Provide on-site and remote technical assistance to customers.
  Respond to service requests, troubleshoot issues, and document resolutions.
  Train end-users on proper equipment use and care.
  
• Customer Service:Build and maintain strong customer relationships through effective communication and support.
  Act as a liaison between the company and clients, ensuring satisfaction.
  Provide feedback to the internal team on recurring customer issues for continuous improvement.
  

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Mon to Fri - 8am to 5.30pm

• Be part of advanced technologies and solutions for power solutions.
• Be exposed to cutting-edge technologies and solutions.

About Our Client

The company provides cutting-edge tools such as battery monitoring systems, power grid monitoring solutions, and maintenance technologies designed to enhance the reliability, efficiency, and performance of utility grids and backup power systems. Serving industries such as data centers, utilities, telecommunications, transportation, and healthcare, the company enables customers to implement condition-based maintenance, ensure regulatory compliance, and extend asset lifespans.

Job Description

Key Responsibilities

• Provide technical service and support for products.
• Perform testing and commissioning, including site acceptance tests in collaboration with consultants and end-users.
• Diagnose and troubleshoot issues in customer installations and products.
• Maintain and execute service agreements with customers, ensuring adherence to contractual service levels.
• Provide guidance and expertise during new product installations and represent the company at on-site installation meetings to resolve field issues promptly.
• Conduct technical seminars for customers and channel partners, and represent the company at trade shows and special events.
• Offer feedback to Product Management regarding market conditions, product enhancements, and necessary upgrades.
• Prepare and submit weekly reports highlighting site-specific issues, customer concerns, or product performance challenges.
• Assist customers during the initial design phase and ensure proper application of Grid Solutions products.
• Deliver specialized training and operational documentation to customers to support their needs.
• Provide on-call support for customer installations and maintenance, including after-hours and weekend support as required.
• Undertake overseas travel within the Asia region for installations and maintenance projects.
• Perform other related duties as assigned.

The Successful Applicant

Requirements

• Bachelor's Degree in Electrical Engineering or a related field, or a Diploma in Electrical Engineering with relevant experience.
• At least 3 years of technical, sales, or related experience in Grid systems or the electrical industry.
• In-depth understanding of critical asset monitoring systems, including Battery Systems, UPS, and Battery Monitoring Systems, with experience in data center battery management and maintenance preferred.
• Excellent interpersonal, presentation, and communication skills to build strong relationships with customers, consultants, and end-users.
• Ability to work independently with exceptional organizational and problem-solving skills.
• Self-motivated, energetic personality with a customer-oriented approach.
• Proven ability to interpret technical instructions in mathematical or diagram form and resolve issues involving multiple variables.
• Demonstrated ability to plan and prioritize tasks effectively, including occasional support for team planning.
• Previous sales or service experience is an advantage.
• Maintains confidentiality and exercises discretion with sensitive business information.

What's on Offer

The client offers candidates an exciting opportunity to be part of a globally recognized leader in critical power grid technologies. Joining the team means working with cutting-edge solutions that drive innovation in power reliability and asset management for diverse industries like data centers, utilities, and telecommunications. Employees benefit from a dynamic, collaborative work environment with opportunities for professional growth, regional exposure across the Asia Pacific and Middle East, and hands-on experience with advanced technologies. The company provides comprehensive training, a competitive compensation package, and opportunities to represent the brand at high-profile events, trade shows, and seminars. For individuals passionate about technical excellence and customer satisfaction, the client offers a rewarding career path with significant impact on the future of energy and power systems.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-012025-6632825

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Duties and Responsibilities
With reference to the Service Lead in AGRAMKOW Asia Pacific, you will be responsible for incoming customer requests, while showcasing your specialization within the technical field. You secure urgent support, maintenance advice and breakdown repairs when needed and work independently as well as collaboratively with your world-wide colleagues.

Your open-minded and helpful approach shines, especially during on-site customer visits, where you support and advise customers in any matter regarding maintenance of equipment, installation, or commissioning of machinery.

Skills and Experience

The right candidate for the job should be equipped with a relevant technical education, such as a degree in Electronics / Electrical / Mechatronics Engineering or similar.

In addition, the following will be required:

• A minimum of 2-3 years' experience in an industrial or automation-based project environment.
• Technically trained with ability to understand PI diagram, E-plan and mechanical drawings is a must.
• Practical electrical knowledge with ability to install equipment/instrument independently.
• Familiar with IoT4.0 concepts and IIOT implementation is a plus.
• Pre-sales experience preferred.
• Experience of the HVAC industry would be desirable, but not essential.
• Strong interpersonal and communicative skills.
• Team player with collaboration with people of all levels both within and outside of the company.
• Fluent communication skill in spoken and written English is essential. Proficient level of mandarin is an advantage.

The position is based in Singapore, and you will be supporting customers mainly within the Asia Pacific Region. Comprehensive, thorough training and needed education will be provided in Singapore and at our head office in Denmark.

What We Offer
We offer an exciting workplace, within a fast-growing industry, where we honor a positive mindset and find high collaboration as a natural part of the day. We foster a culture that values individual well-being and encourages a healthy work-life-balance. We support each other and embraces creativity. We offer opportunities for personal growth and professional development, that not only values your contributions, but also invests in your continuous development, making work an enjoyable journey.

We invite candidates for interview on an ongoing basis and close the position once we have found the right Candidate for the job.

AGRAMKOW

For more than four decades, AGRAMKOW has served manufacturers of refrigerators, freezers, and air-conditioning units all over the world. Based on our vast experience we provide reliable, high-quality, end-of-line solutions to help our customers establish a key edge in fiercely competitive markets.

From individual charging, evacuation, and testing stations to complete production line information systems that integrate operating data. Our customers count on AGRAMKOW to pave the way to data-driven production resulting in continuous quality and productivity improvements and better-informed decision-making.

At the heart of the AGRAMKOW's way of working our vision, is to be the most admired company in our industry for our applications expertise, partnership, productivity technologies and SMART solutions.

We are working across the globe, building partnerships to improve quality-based performance for customers. We provide local support wherever our products are installed, and have support centers in Asia, Europe and Latin America. In addition, we have an extensive network of alliance partners worldwide.

Always in the vanguard of new performance technologies, AGRAMKOW has continually pioneered within new solutions in response to the rapidly changing needs of the consumers within commercial appliance and air conditioning industries.

• Excellent communication skills

• Interpersonal skills, active listening

• 1 year previous Service desk or equivalent experience

• Attend to Phone, Email and any other online queries where applicable

• Excellent organisational skills

• Managing incidents including business expectations and communication

• Strong knowledge of Microsoft based operating systems, MS Outlook and MS Office

• ITIL Knowledge will be a plus

• Comply to process and procedures

• Administrative tasks

Must have Talent / Skills

• Minimum a diploma in Information Technology or equivalent

• Minimum 1 year of relevant working and technical IT experience

• Pleasant disposition and good social etiquette with good spoken and written English

• Good telephony and problem solving / troubleshooting skills

• Good customer service attitude

• Process Driven

• Able to liaise with Customer for daily operations

Accel Analytics Pte Ltd is a solution provider for analytical and measurement instrumentation products. We are looking for a Technical/Service Engineer to join our Technical Team.

Roles & Responsibilities:

- Provide comprehensive after-sales support, including installation & commissioning.

- Perform maintenance and troubleshooting of gas detectors, gas analyzers & liquid analyzers.

- Offer technical consultation to customers, addressing their inquiries and providing expert guidance.

- Efficiently troubleshoot and resolve problems within specified timelines, ensuring customer satisfaction.

- Prepare accurate and detailed service reports to document work performed.

Requirements:

Minimum ITE/Diploma in relevant field

- Fresh candidates without experience and willing to learn may apply.

- Relevant training and guidance will be provided.

- Independent, responsible and willingness to learn personality.

- Class 3 driving license will be an added advantage. (Transport may be provided upon confirmation of employment)

- Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv to [email protected] along your current and requested salary.

We regret that only shortlisted candidate will be notified.

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114