Job Description

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• It is a newly established 100% owned subsidiary international Parent company. To construct a new plant to produce solution-polymerized styrene-butadiene rubber (S-SBR) in Jurong Island.Ensure all maintenance activities comply with AKSS EHS policies.Will need to work on some weekend and outside office hours monthlyPlease find the attached job description for Maintenance Mechanical Engineer. We require 1 headcount for this position.Urgent Hire!.

Job Requirement

Requirements

1. Degree/Diploma in mechanical engineering or the equivalent
2. 3-5 years of experience in Plant & facilities in chemical plant.
3. Basic understanding of maintenance technology manufacturing process plant environment.
4. Demonstrated ability to adjust contractors independently and effectively.
5. Good interpersonal and communication skills
   

• Equipment Maintenance and Troubleshooting: Oversee the maintenance, troubleshooting, and repair of container handling equipment such as cranes, straddle carriers, reach stackers, and forklifts to ensure continuous operational efficiency.
• Preventive Maintenance Scheduling: Develop and implement preventive maintenance programs to reduce downtime, enhance equipment lifespan, and optimize overall performance.
• Equipment Calibration and Upgrades: Ensure the accurate calibration of equipment systems and coordinate upgrades or retrofitting to meet technological advancements and compliance standards.
• Operational Support: Provide technical support to operations teams, assisting in diagnosing and resolving equipment-related issues promptly to minimize operational disruptions
• Safety Compliance: Ensure all equipment adheres to safety regulations and operational standards, conducting regular safety inspections and ensuring that equipment is used safely and efficiently.
• Equipment Performance Monitoring: Use diagnostic tools and systems to continuously monitor the performance of port equipment, analyzing data to identify trends, optimize performance, and prevent equipment failure.
• Budget and Cost Management: Assist in the budgeting process for equipment-related expenditures, such as maintenance costs, spare parts, and repairs, and work to control costs while maintaining operational readiness.
• Vendor and Supplier Management: Liaise with equipment manufacturers, service providers, and suppliers to procure spare parts, arrange for repairs, or source new equipment, ensuring quality and cost-effectiveness.
• Training and Development: Train and mentor port staff and technicians on proper equipment operation, maintenance procedures, and safety protocols to enhance team competence and reduce errors.
• Root Cause Analysis and Reporting: Conduct root cause analysis of equipment failures or inefficiencies and provide detailed reports with recommendations for improvements or corrective actions.

Requirements:

• NITEC/Higher Nitec/Diploma in a technical discipline
• Those without the stipulated qualifications but with related technical experience are also welcome to apply
• Willing to work outdoors, at heights and on weekends

Wong Li Qi (Jolin)

R2096313

• Service Recovery Support: Assist in the identification, diagnosis, and recovery of faulty equipment and machinery, ensuring timely restoration of service to meet customer requirements and operational goals.
• Troubleshooting & Diagnostics: Support senior engineers in troubleshooting and diagnosing mechanical, electrical, or software-related issues in equipment and machinery, using industry-standard tools and techniques.
• Preventive Maintenance: Assist in the implementation of preventive maintenance schedules to reduce equipment downtime and prevent future failures, ensuring maximum operational efficiency.
• Repair & Refurbishment: Help in carrying out repairs and refurbishments of malfunctioning equipment, ensuring repairs are made in compliance with safety standards, manufacturer guidelines, and company procedures.
• Technical Documentation: Maintain accurate records of service activities, including work performed, parts replaced, and equipment status updates. Assist in generating technical reports for service recovery actions and outcomes.
• Parts Inventory Management: Support in managing spare parts and components for equipment recovery. Assist in tracking inventory levels and ensure timely replenishment to avoid delays in repair processes.
• Customer Communication: Assist in communicating with clients regarding service recovery updates, equipment status, and timelines for repairs or maintenance, ensuring customer satisfaction.
• Quality Assurance: Help ensure that all equipment recovery actions meet company and industry standards for quality, safety, and reliability. Support post-repair testing and inspections to confirm equipment functionality.
• Training & Development: Participate in internal training programs to improve technical knowledge and stay up-to-date with the latest developments in equipment technology and repair techniques.
• Root Cause Analysis & Reporting: Assist in conducting root cause analysis for equipment failures and contribute to the development of solutions to improve long-term equipment reliability and performance.

Requirements

• Minimum Nitec/Higher Nitec or Polytechnic Diploma in any technical disciplin
• Willing to work outdoors and at heights
• Able to work 8 hours or 12 hours rotating shift

Wong Li Qi (Jolin)

R2096313

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Highlights

• Career Advancement
• Young & Passionate Teams
• Performance Bonus
• Friendly Working Culture

Job Responsibilities

• Manage all on-site technical and engineering-related matters.
• Ensure all works meet the company’s quality standards and contractual requirements.
• Participate in project planning and monitor project progress and schedules.
• Coordinate with clients and sub-contractors on all project aspects. Provide both technical and non-technical resolutions, followed by proper documentation.
• Assist the Project Manager in preparing monthly progress claims and reports.
• Supervise and guide Supervisors and Foremen to ensure compliance with client and regulatory requirements.
• Ensure Environmental, Safety, and Health (ESH) practices are adhered to at all times.
• Propose cost-saving measures and innovative engineering solutions.
• Perform other ad-hoc duties as assigned.

Job Requirements

• Degree in Civil or Structural Engineering recognized by the Professional Engineers Board (PEB) Singapore
• Minimum 3 years of Civil Engineering experience, specifically in LTA projects involving earthworks, roads, and drainage.
• Proficient in Microsoft Office and MS Project.
• Knowledge of Building Information Modeling (BIM) and Virtual Design and Construction (VDC) is a plus.
• Organized, detail-oriented, and able to work with a positive attitude and sense of urgency.
• Strong interpersonal and analytical skills.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• Able to communicate with Chinese customers and English-speaking vendors.
• A team player

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

- The Solar Photovoltaic (PV) and Energy Storage Systems (ESS) Asset Maintenance Engineer leads in the operations and maintenance of solar PV ,Hot water and ESS

- Establishes new methods to optimise system performance and improve maintenance processes.

- He/She prepares cost estimates for maintenance and verifies claims on repair works.

- He/She occasionally works outdoors at solar PV, Hot water and ESS sites.

- He/She is systematic and has good problem-solving skills in leading the operations and maintenance works

- He/She has good leadership and communication skills to engage his/her stakeholders.

- He/She is also service-oriented and ensures customers are satisfied with the services provided.

- He/She to Create Maintenance Schedules

JOB DESCRIPTION – MAINTENANCE SPECIALIST

Job Functions & Summary:

Assist the maintenance team in carrying preventive and breakdown maintenance for facility maintenance services.

Job Roles & Responsibilities

(1) Handle daily rectification and repair work in the facility such as leak, choke, lightings issue, air condition, Audio Visual and sound system, kitchen equipment, painting, etc.

(2) Respond to service call form other department personnel relating to maintenance issue to ensure prompt action and trouble shoot breakdowns and defects.

(3) Work closely with contractors to manage day to day operations.

(4) Ensure all facilities maintenance works are carried out with the least disruption to the business operations with appropriate with appropriate safety measures.

(5) Understand and abide to risk assessments.

(6) Maintain and ensure minimum supplies of technical equipment for prompt service delivery at all times.

(7) Keeping a record of all the day to day maintenance and service activities taken in the facility.

(8) Respond to all fire safety and emergency situations.

(9) Any other duties that may be assigned from time to time.

Company Welfare:

1.Annual Wage Supplement (AWS)

2.Variable Bonus

3.Annual Leave & Family Care leave & Birthday leave 1 day + Gift Vouchers

4.Duty Meals

5.Flexible Benefit & Dental Benefit

6. Lunar New Year Hong Bao

Responsibilities

• To carry out maintenance of all Mechanical & Electrical (M&E) system and Bio-medical equipment related to the Facility Management
• Responsible for all M&E works eg. Air-conditioning, Lifts, Electrical works and Fire Protection system, and the Sanitary & Plumbing works and building maintenance
• Responsible for the upkeep of biomedical equipment including wards equipment, wheelchairs and geriatric chairs
• Carries out in-house preventive maintenance (PM) for M&E system and Bio-medical equipment according to PM schedule
• Performs trouble-shooting and corrective maintenance (CM)
• Carries out installation of fixtures or replacement works required by the Facility Management
• Supervises installation / renovation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out in accordance with the contract
• Ensures proper documentation such as inspection and test records of all maintenance, repair and service activities
• Assists the Supervisor in the collection of data related to the Facility Management as and when required
• Liaises with all functional department concerning maintenance matters
• Collaborates with team members to ensure the Facility Management’s Key Performance Indicators (KPIs) are met
• Supports and guides new technicians in routine functions
• Escalates complex problems and issues to the Supervisor
• Performs any other duties as assigned by the Supervisor

Requirements

• Possesses at least NITEC course in Electrical, Air Conditioning, Mechanical, Building Services or equivalent
• Preferably with 2 to 3 years of relevant experience in a similar capacity
• Knowledge of PC skills in Microsoft Word and Excel
• Organized, meticulous, resourceful, proactive and take initiatives at work
• Able to work well independently as well as in a team

Location: Ren Ci @ Woodlands

Location: Singapore

Job Type: Full-Time

Working Hours: 5 day work week (Tuesday – Saturday)

Description:

We are seeking a motivated and reliable individual to handle window mesh installation projects.

Responsibilities:

• Perform installation tasks for household fixtures.

• Use basic handyman tools and equipment to carry out installations.

• Travel to different sites to carry out installation works.

• Attend to any defects that customers may have.

Requirements:

• Relevant practical experience will be advantageous.

• Ability to carry out installation with the use of basic handyman tools.

• Possess Class 3 driving license. Vehicle for transport will be provided.

• Training will be provided.

Job Description & Requirements

•To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.

•Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.

• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

• Support safety and EHS related activities and audits.

Duties:

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.

2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.

3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.

4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.

5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.

6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.

7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience

8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.

• Knowledge in TMP, Equipment FMEA is an advantage.

• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.

• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

• Diploma / Degree in Mechanical or related discipline

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.

• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience

• Work under pressure and multi-tasking.

• A good team player and have good interpersonal skills

Jessie Hoe Huey Miin

CEI Reg No: R1103861

EA: 99C4599

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About Company:

NEU Industries Pte Ltd is established in Singapore since April 2008, distributing medical and pharmaceutical products to hospitals, nursing homes an pharmaceutical manufacturing companies. Products include chemicals, patient trolleys, medical machines, surgical instruments medical pulps consumables, and rehabilitation products. We work closely with end users to design consumable products to meet their needs.

Headquartered in Singapore and having regional offices in Thailand and Malaysia, NEU Industries is poised to bring forth innovative products and solutions close to the hospitals and nursing homes.

Job Description:

• Response to service calls within customer's stipulated service response time

• Attend to service and repair works on site

• Test, install and commission equipment at customer's premise

• Sufficient knowledge about Company’s product to handle customer queries

• Contribute to product improvement and localization of the Company

• Inspect and test equipment, accessories and consumables

• Provide technical presentation and conduct technical trainings (if required)

• Submit weekly technical activities reports or other reports

• Support activities like technical services, exhibitions, customer visits, etc.

. Support overseas affiliated companies when required

Technical Engineer provides innovative solutions in ACMV industry. This person must be a highly skilled problem-solver who has the business knowledge and technological expertise to implement strategies, evaluate processes, and build upon an infrastructure that supports the ever-changing needs of customers. In this role, the technical engineer will work with complex systems, designing, developing, and integrating them at every stage of a project lifecycle. The ideal candidate can reliably deliver mission-critical solutions that boost accessibility, optimization, and security.

Roles and Responsibilities

• Participate and perform on site testing and commissioning for ACMV system.
• Participate and perform Integration testing and commissioning,
• Coordination of internal resources and external partners (contractors) and clients for testing.
• Provide information by collecting, analyzing, and summarizing tests results and issues.
• Support or lead Investigation activities for the problem areas
• Improve operations by conducting analysis and recommending changes in policies and procedures
• Protect operations by keeping information confidential.
• Have strong negotiation, conversational and relationship skills to manage resources, and clients.

Requirements

• Diploma / Bachelor's Degree in Mechanical Engineering or related field,
• At least 3 years of desired knowledge and/or experience - Proven working experience in T&C in ACMV
• Good knowledge of T&C processes and electrical equipment

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in promoting spare part sales, maintenance, operation, equipment installation supervision and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Promoting aftermarkets/replacement spare parts or services for existing and potential new customers

· Identify customer's needs and sales opportunities to help future growth

· Provide technical field assistance in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training or maintenance presentations to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD is a plus point.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

Responsibilities:

• Provide general administrative support to Maintenance Department.
• Maintain records of maintenance activities in the appropriate logs.
• Support preparing documentation and reports.
• Assist in regular maintenance inspection and liaise with the vendor for the schedule arrangement.
• Perform other general administrative duties assigned by Superior.

Requirements:

• Superior organizational skills and multitasking abilities.
• Strong communication skills.
• Attention to the little details.
• Problem-solving skills.
• Basic qualification or sufficient experience as an Admin in Construction Sector.

Did you know KONE moves over one billion people every day? We employ over 60,000 driven professionals in over 60 countries worldwide joined together by a shared vision. As a global leader in the elevator and escalator industry, it is our mission to improve the flow of urban life.

Why this role?

KONE Singapore is embarking upon an exciting growth phase and as such we are seeking Maintenance Technicians to join our team in Singapore.

You will work in a small group of technicians attending fault calls, completing escalator/elevator repairs and servicing an allocated maintenance run.

Being part of a global organisation that actively supports your career and internal promotions, means that for the right person, this critical role could be the next step in a fantastic career at KONE.

What will you be doing?

• Responsible for accurate and real-time back reporting of work performed to ensure accuracy of customer notification
• Responsible for maintaining excellent relationships with customers
• Perform maintenance, repairs and installation in collaboration with other Maintenance Technicians
• Manages daily workload with minimal assistance from Supervisor
• Effective communication with all stakeholders
• Ensure safety at all times
• Depending on seniority, you may be required to give training/coaching to persons nominated by the supervisor

Are you the one?

• Minimum Certificate in Electrical, Electronic or Mechanical Engineering
• Possesses a service mindset
• Able to work in a fast-paced environment

What do we offer?

• Career progression in opportunities within a global organisation
• Total reward elements that engage and motivate our employees and help us make KONE a great place to work
• Comprehensive learning and development programs covering a wide range of professional skills