Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

Benefits:

• 5 days Work
• East (required to travel Islandwide)
• Own Transpiration will be advantage
• Basic + Allowance + OT (Good Package)!

Job Scope:

• Configure, initialize, activate, troubleshoot, and restore both hardware and software systems for Digital Signage
• Deliver basic training to operators and technicians of customers.
• Oversee and manage the installation process on-site.
• Conduct system diagnostics and facilitate fault recovery.
• Offer routine and on-demand repair and system services.

Requirements:

• Candidates must have Digital Signage installation/ troubleshoot/ maintenance experience
• Candidates with own transportation is a plus

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

MNC- Oil & Gas manufacturing company

• Working day: 5 days
• Location: Tuas, shuttle provided and transport allowance is given
• Overtime pay: 1.5/2 times
• Bonus, annual leave, medical claim etc.

Job Scope:

• Execute maintenance and repairs on manual lathes and CNC machines.
• Coordinate with external service providers to manage and supervise repairs.
• Carry out routine inspections and preventative maintenance on equipment to guarantee optimal functionality.
• Identify and resolve machinery problems and implement efficient solutions.
• Keep precise records of maintenance and repair activities.

Requirements

• At least 4 years of maintenance CNC Turning/ Milling/ Manual Lathe machines.

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

E-Commerce Web Maintenance Specialist

• Regular updates and maintenance of e-commerce websites.
• Troubleshoot and resolve site issues, ensuring high functionality and user experience.
• Monitor website performance and inventory
• Update product listings, categories, and promotions as required.
• Implement software patches and updates to e-commerce platforms
• Conduct periodic backups and ensure data integrity.
• Coordinate with developers, designers, and other team members for website improvements/requirements.
• Perform Customer Chat Service Messaging
• Perform quality assurance testing after updates.
• Weekly Reports Required

Requirements:

• Proven experience in e-commerce web maintenance (min. 1 year).
• Proficiency in shopping / social media platforms
• Strong problem-solving skills and attention to detail.
• Ability to work independently and meet deadlines.
• Required to work weekend if required

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client provides advanced instruments and systems designed for high performance across various industries.

• Prepare service and spare parts quotations to customer inquiries.
• Build and maintain strong customer relationships to ensure high-quality service and support.
• Perform in-house repairs and on-site commissioning for gas and water quality analysers, CEMS, and AQMS, troubleshoot issues.
• Collaborate with customers to address service concerns and offer technical solutions.
• Support the project team in conducting FAT and SAT and deliver product training to end users and distributors.

Requirements:

• Degree in Mechanical Engineering/Environmental Science Engineering or equivalent.
• At least 2 years of experience in the analytical instruments.
• Good knowledge of gas analyzers, CEMS, and water quality analyzers.
• Customer-oriented with a positive attitude, along with excellent planning and time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Maintenance and Production Operator
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8AM – 5PM, Sat: 8AM - 12PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and Packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• Able to work in a dusty environment
• On-Job training provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71458 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

about the company

My client is a leading consumer electronics manufacturing with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Responsible for the day to day equipment maintenance
• Participate in lean and continuous improvement assignment
• Compile monthly production report( Output, Machine UPH and Yield)
• Production planning and allocation of manpower to meet delivery schedule
• Uphold housekeeping standards for employees
• Actively drive/lead continuous improvement activities to improve yield
• Manage equipment servicing contracts with suppliers.
• Ensure that all equipments are operating at optimum UPH and speed

skills & experience required

• Degree / Diploma in mechanical / mechatronics engineering / manufacturing
• Min 5 years of equipment maintenance experience
• Possess good analytical, troubleshooting, and problem-solving skills
• Willing to work in western part of Singapore (Tuas / Pioneer / Boon Lay)

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job.

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Maintenance and Production Operator
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8AM – 5PM, Sat: 8AM - 12PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and Packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• Able to work in a dusty environment
• On-Job training provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71458 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Jobscope:

A. Plant, Equipment & Facilities Maintenance

• Lead the Maintenance Department, managing all aspects of plant processing equipment.
• Conduct condition monitoring, troubleshooting, and preventive maintenance to ensure mechanical reliability.
• Collaborate with cross-functional teams to diagnose and address machine breakdowns.

B. Housekeeping & Safety

• Enforce Company Health & Safety policies, ensuring compliance across maintenance activities.
• Supervise safety measures for contractors and maintain cleanliness in machinery spaces.
• Conduct safety training and manage environmental hazard prevention strategies.

C. Process Equipment Improvement

• Analyse work methods and machine functionality to identify improvement opportunities.
• Manage maintenance schedules, ensuring timely execution of repairs and upgrades.
• Prepare detailed reports for management, offering insights and recommendations.

D. Other Responsibilities

• Maintain accurate equipment documentation and performance data.
• Participate in plant expansion projects and assist with additional duties as required.

Requirements:

• Min. Diploma or Degree in Mechanical Engineering.
• 3 to 5 years of experience in plant, equipment & facilities maintenance, and troubleshooting.
• Possess good analytical, troubleshooting, and problem-solving skills.
• Experience working in the mechanical engineering field and hands on experience.
• Fire Safety Manager certification will be added advantage.
• Project management skills will be added advantage

To apply, please visit www.gmprecruit.com

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R11092393

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Location: Tuas ($110/ month for transport allowance)

Mon - Fri 830am-530pm

1 year contract / Permanant

Job Description:

• Plan and execute corrective and preventive maintenance on facility and production equipment.
• Implement TPM programs, including autonomous maintenance and spare parts management.
• Coordinate with external vendors for service contracts and maintenance.
• Support EHS and audit activities.

Key Responsibilities:

1. Perform maintenance and document equipment and facility activities.
2. Manage spare parts inventory, support continuous improvement, and conduct ISO audits.
3. Ensure EHS compliance and participate in inspections.
4. Troubleshoot equipment issues and find quick solutions.
5. Coordinate with contractors for maintenance and ensure quality work.
6. Conduct site inspections and manage corrective actions.
7. Troubleshoot with electrical diagrams and mechanical drawings (3+ years experience).
8. Evaluate contractors and negotiate quotations.

Interested applicants may email resume to [email protected]

Jessie Hoe Huey Miin (CEI Registration No: R1103861)

Recruit Express Pte Ltd (EA: 99C4599)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

Job Highlights

• Dynamic, collaborative and positive working environment
• Medical, Dental, Phone, Transport allowances, Insurance, etc
• Opportunities for enhanced learning

Job Description

• To respond to customer calls to troubleshoot technical problems of medical devices so as to achieve customers’ satisfaction in turnaround time and minimize downtime
• To perform preventive maintenance as scheduled and highlight technical abnormalities to minimize equipment downtime
• To clearly document the technical actions of problems resolved to maintain traceability
• To manage spare parts inventory to ensure sufficient stocks on hand and smooth operations

REQUIREMENTS

Education

• Diploma or Degree in Biomedical / Electronics / Electrical Engineering

Experience

• At least 2 years of relevant experience in the medical industry (especially IVD or hospital BME departments)
• Demonstrated ability to diagnose and resolve problems on electronic and mechanical instrumentation

Knowledge, Skills, Abilities

• Ability to read, interpret and analyze schematics, assembly drawings, and wiring diagrams
• Ability to use standard test and calibration equipment including digital multimeter
• Basic software skills and computer literacy (networking experience is advantageous)
• Knowledge of service principles, practices, and procedures
• Good verbal & written communications skills
• Excellent customer service attitude
• Able to be on 24/7 on-call duty (weekly rotation basis with the team), to be activated on weekends and “off hours” as required to support clients and business needs
• Able to travel overseas for technical training by manufacturers (when international travel is permitted again)

Responsibilities:

• Familiarity of ship owners' and shipyards' working procedures and environments
• Willing to work in local and foreign shipyards as well as in anchorage environments at irregular hours, including weekends, public holidays, and overnights, depending on vessel schedule
• Capable of inspecting, troubleshooting, and performing full maintenance on the ship's navigation equipment and main engine remote control system

Requirements:

• Relevant marine / mechanical / engineering qualification
• Sound knowledge in pneumatics / electrical control engineering
• Hands on experience in Marine Automation
• Those with minimum experience or education level will be consider for Technician

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Basic information:

• Location: Woodlands
• Working hours: Monday to Friday, 8.30AM to 6.00PM

Job Description:

The role of the position to oversees the planning and all project operations. The role managed the progress of the project and ensures quality and timely delivery.

• Lead, motivate, and oversee the Project and Maintenance Team to achieve project objectives.
• Manage overall project planning, cost control, and execution.
• Conduct site inspections prior to the commencement of work.
• Oversee project tendering processes and documentation.
• Prepare and manage project schedules to ensure timely completion.
• Interpret detailed drawings, construction plans, and fabrication methods.
• Develop and adhere to annual budgets, including maintenance expenses.
• Coordinate and manage multiple project schedules and budgets simultaneously.
• Collaborate with designers, contractors, and vendors to ensure projects are delivered on time, within budget, and with high-quality standards.
• Ensure all plans and documents are approved by landlords and local authorities before work begins.
• Supervise daily site progress, resolving coordination issues with contractors, vendors, and building facility management.
• Attend regular site meetings and conduct inspections.
• Provide status updates and take corrective actions to keep projects on schedule.
• Monitor contractor and vendor performance through regular inspections and quality checks.
• Ensure on-site work complies with local authority regulations and safety standards.
• Enforce site safety procedures and manage workplace risks.
• Verify and audit the quality of completed contractor and vendor work.
• Conduct progressive snagging and defect clearance throughout the project lifecycle.
• Collaborate with the Operations Team to ensure timely handover of projects.
• Manage post-construction issues with the Operations Team, consultants, contractors, vendors, and relevant authorities to ensure timely rectifications.
• Assist in developing and managing strategic plans and program initiatives to align with the company’s goals.

Job Requirement:

• NTC / Nitec / Diploma in Mechanical, Electrical, Architecture, process engineering or related disciplines
• Proficient in MS Office and AutoCAD
• Minimum 5 years of working experience in the food industrial sector, (e.g. foodcourt and coffeeshop project and reinstatement works)
• Proven record in managing and leading a Project/Maintenance Team.
• Possess Class 3 Driving License
• Good interpersonal skills with the attributes of a team player and a keen eye for details
• Motivated and results-oriented
• Ability to collaborate and work effectively with a variety of stakeholders

For interested candidates, please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

ClearSK Healthcare Pte Ltd manages the award-winning ClearSK® chain of medi-aesthetic centres with presence in Singapore, Shanghai, Hangzhou and Kuala Lumpur. As a Singapore leading aesthetics and healthcare chain, it will be a great opportunity for you to grow and learn in a multi-disciplinary environment with medical and management professionals. You will find yourself working in a challenging environment, where your capabilities will be developed to the maximum potential.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills. The suitable candidates can expect the following attractive benefits package:

- An attractive Salary Package and 5 working days per week.

- Comprehensive on job training and professional guidance provided.

Fast-track career path for the fast learner and high performer

- Opportunity to work alongside doctors and management.

- Benefits include a generous package of free medical aesthetics treatments.

- Office near Novena and Lavender MRT station.

Job Description

The Operation Executive (Clinic Facility and Assets) is a corporate post, experienced in managing the facilities and assets for a group of clinics. The job holder reports directly to the GM and will join the headquarter team.

Maintenance:

· Troubleshoot equipment related problems to minimize equipment downtime.

· Benchmark equipment for technology advancement.

· Manage equipment suppliers to ensure that the delivery meet specification, cost and time.

· Install and setup new equipment as well as equipment connectivity.

· Provide and maintain preventive maintenance specifications to meet ISO requirements

Facilities:

· Manage the day-to-day maintenance and functional operations of assigned outlets/offices

· Ensure that contractors perform their services as per agreed KPIs

· Manage operational administrative procedures are carried out properly

· Recommend, provide justification for, and follow-through the variation of work orders within delegated authority

· Establish good relations between own team members and building owners

· Prepare and present weekly service/maintenance and monthly management reports

Requirement

· Bachelor Degree in Mechanical/ Electrical Engineering, Building/ Facilities or equivalent with 5 years of relevant work experience

• Diploma with minimum 4 years of relevant work (M&E) experience

• Experience in M&E preventive and corrective maintenance

• Proficient in English communication and writing.

• Ability to read, write, and converse in Chinese will be an added advantage as liaising with our counterparts in China and Chinese customers.

• Knowledge of IT (advantage)

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492