Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Network Operations

1. Manages the set-up and coordination of TV transmission traffic in real time.

2. Acts as the first level support, and point of contact, for equipment, and the broadcast network.

3. Fully responsible for operating Eurovision's satellite, fibre and IP network.

4. Oversees the quality of transmission signals and reports to the Senior Network Operations Engineer.

5. Detect and correct any anomalies or faults in transmissions.

6. Allocates resources and services to customer on a short notice basis.

7. Reports faults/modifications on equipment in the Eurovision Control room, or at any important technical point across the network.

8. Takes the temporary measures required in order to ensure the continuity of service.

9. Ensure customer satisfaction, and have the appropriate behaviour in all situation.

10. Assures a consistent and high quality of service, through monitoring, and ensuring service integrity.

11. Enters real transmission times used for invoicing services.

12. Is responsible for capturing incident logs in the relevant operating system in order to follow up internally with support teams, and externally for customer reporting.

13. On night shifts maintains full responsibility for network traffic and can take all necessary measures to ensure continuity in the network.

Special Projects

1. Can participate in event projects to provide technical guidance, and engineering solutions.

2. Can be required to take part in outside missions; as a technical coordinator, engineer, and engineer in charge.

3. Upon Manager request other tasks can be added.

Working Conditions

1. Shift work from 0630 – 1430 and 1400 – 2200 hrs GMT+8.

2. Will be expected to work independently most of the time.

3. Will have to support head office, regional and international bureaus.

Suitably qualified candidates are invited to submit your detailed resume indicating qualifications, working experience, current and expected remuneration package, available commencement date, and contact number.

All applications will be treated in strictest confidence and only shortlisted candidates will be notified.

By expressing an interest in joining us, you agree that personal data you submit to us may be collected, used and disclosed by the Company and our service providers and agents for the purpose of processing your job application, including evaluation of your suitability, background screening, contacting you regarding your job application, and notifying you of future career opportunities. You warrant that where you have disclosed personal data of individuals (e.g. next-of-kin, friends or referees) to us and our service providers and agents in connection with your job application, you have obtained the prior consent of such third parties for us and our service providers and agents to collect, use and disclose for the above purposes, in accordance with any applicable laws, regulations and/or guidelines. You also acknowledge that in the course of the collection, use and disclosure described above, relevant personal data may be transferred outside of Singapore.

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

RESPONSIBILITY

• Assist Product Owner and Business Analyst to craft out user story acceptance criteria • Analyse and decompose complicated software systems, and design a holistic test strategy • Conduct research on emerging technologies and develop test automation framework • Develop test suites of test scenarios and test cases • Take a risk-based approach for test automation • Perform time boxed exploratory testing • Maintain regression test suite in QA nightly build • Actively refine smoke test suite in Development CI environment • Lead system integration testing with other system owners • Manage user acceptance testing • Manage defect life cycle, test artefacts and repository • Drive continuous improvement in agile testing practices and tools • Take on secondary role as an Application Performance Engineer or Application Security Engineer EXPERIENCE AND SKILLS NEEDED • Min 3 years experience in exploratory testing and regression test automation • Strong analytical skills • Meticulous attention to details • Good interpersonal skills such as tactfulness • Good presentation and listening skills • Experience in agile development environment will be an added advantage • Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant will be an added advantageb • Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage • Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

Data Engineer - Talend ETL

• Required skills:
• Experience with Talend, Python and Spark
• Experience in Database and Hadoop (Hive, Impala, HDFS)
• Understanding of data-warehousing and data-modelling techniques
• Using the Talend ETL toolset, to create new and maintain existing ETL jobs.
• Design and implement ETL for extracting and transforming data from diverse sources, such as: Cloudera, PostgreSQL, and SQL Server databases.
• Design and develop database tables necessary along with the necessary constraints as per the requirement.
• Collaborate with Team members to understand source system structures and data retrieval methods/techniques, and tools within the organization.
• Support the development of data transformation logic using ETL tools or scripting languages like SQL, Python.
• Clean, validate, and transform data to conform to target schema and quality standards.
• Work with the Team to execute data quality improvement plans.
• Participate in troubleshooting activities to maintain data integrity and process efficiency.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Mon to Fri 9am to 6pm

Summary:

• Provide support and manage project

• Follow up with clients in timely manner

• Assist sales team with site survey & system design

• Provide onsite support to diagnose and rectify technical issue

• Outline budget based on requirements and tracking costs to deliver project on budget.

• Prepare detailed project plan to schedule key project milestones, workstreams & activities.

• Manage delivery of the project according to project plan.

• Track project and providing regular reports on project status to project team and key stakeholders.

• Manage and adjust for any changes in project scope, schedule and/or budget.

• Managing the relationship and communication with the client and all stakeholders, ensuring the project is delivered to their satisfaction.

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science / Information Technology

• At least 1 year experience in handling software projects

• Good understanding of programming , new technology trends / applications etc and with .basic cybersecurity & network knowledge.

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Good working attitude and self-motivated

Job Description:

• Identify and troubleshoot issues in circuit boards using testing tools like oscilloscopes and multimeters.
• Perform visual inspections and utilize specialized tools to find defects or faults on the board.
• Solder and desolder components to replace damaged or malfunctioning parts.
• Use rework stations and hot air tools for efficient component removal and replacement.
• Conduct functionality tests on repaired boards to confirm they meet required standards.
• Keep comprehensive records of repair work, including fault details and resolution steps.
• Capable of adjusting PCB design to address component obsolescence.
• Keep current with new repair methods and tools.
• Engage in training sessions and workshops to advance technical skills.
• Parts teardown, re-assembly, re-certification and qualification
• Troubleshoot PCB Electronics

Requirements:

• Miniumum Diploma / Degree in Electronic/Electrical Engineering
• At least 4 years of experience in troubleshooting of PCB Re / Semiconductor Components.
• PCB repair and maintenance in a huge advantage.
• Strong diagnostic and troubleshooting skills.
• Excellent communication and customer service skills.
• Ability to work independently and in a team environment.
• Familiarity with industry standards and best practices for PCB maintenance.

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

2-4 years of in-depth knowledge and experience in front-end and backend development

Ability to solve complex development problems and produce high-quality code while pushing the technical boundaries.

Proficiency in one or more programming languages; we use Python, Javascript and TypeScript.

Knowledge in frontend frameworks such as React, Next.JS, FastAPI, REST API or similar frameworks.

Experience with Docker/Kubernetes, DevOps, CI/CD, Github

Experience with Linux operating system (Ubuntu, RHEL, etc.)

Experience working on Agile projects and Agile methodology in general

Excellent problem solving, communications, and teamwork skills

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Build and optimizing ‘big data’ data pipelines, architectures and data sets.

To support migration of data from Hadoop platform to Snowflake.

Performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.

To support and develop Data modeling, Data mapping activities.

Strong analytic skills related to working with unstructured datasets.

Build processes supporting data transformation, data structures, metadata, dependency and workload management.

Manipulating, processing and extracting value from large disconnected datasets.

Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.

Perform CI/CD Activities, Deployment activities in both cloud and on premises or as required.

Requirements

Experience with Data engineering tools (Python, Spark (Scala or Python), Hadoop).

Experience with relational (oracle, MySQL, MS Sql) or NoSQL databases, including Postgres and Cassandra.

Experience with data pipeline and workflow management tools.

Experience with stream-processing systems: Storm, Spark- Streaming, etc Experience with object-oriented/object function scripting languages: Python, Java, C++, Scala,etc

Experience on Cloudera/ Data bricks/ Snowflakes platforms will be added advantage

Experience with Cloud (Aws, Azure or Google).

JOB SCOPE

Responsible for executing the company projects in mechanical & electrical works in building construction which covers:

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M & E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works
• Ensure quality of works is achieved and safety & environmental regulations are complied with
• Ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum 5 years relevant experience of M & E works
• possess a degree from universities in mechanical or electrical engineering, recognized by the Professional Engineer Board to be overall in charge of all M&E trades.
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office
• Good communicative skills, able to interact with people of all levels and teamwork

Our clien is looking a experience analog chip designer engineer, this candidate must have at least 3 year work experience in similar role.

Your job responsiblities are:

-Use simulation tools to predict circuit behavior, identify potential issues.

- Design and develop high performance digital standard cell libraries tailored to meet critcal design specification, performance, power consumption.

- Work closely with layout design team to ensure accurate and efficient implementation of the physical layout of both analog and digital standard cells.

- Competent in PERL, TCL, Python and C++.

- Proficiency in schematic Capture & Simulation ( Cadence Virtuoso, Spectre)

• Build and optimizing ‘big data’ data pipelines, architectures and data sets.
• To support migration of data from Hadoop platform to Snowflake.
• Performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• To support and develop Data modeling, Data mapping activities.
• Strong analytic skills related to working with unstructured datasets.
• Build processes supporting data transformation, data structures, metadata, dependency and workload management.
• Manipulating, processing and extracting value from large disconnected datasets.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Perform CI/CD Activities, Deployment activities in both cloud and on premises or as required.

Requirements

• Experience with Data engineering tools (Python, Spark (Scala or Python), Hadoop).
• Experience with relational (oracle, MySQL, MS Sql) or NoSQL databases, including Postgres and Cassandra.
• Experience with data pipeline and workflow management tools.
• Experience with stream-processing systems: Storm, Spark- Streaming, etc Experience with object-oriented/object function scripting languages: Python, Java, C++, Scala,etc
• Experience on Cloudera/ Data bricks/ Snowflakes platforms will be added advantage
• Experience with Cloud (Aws, Azure or Google).

Overview

Microsoft Cloud Operations and Innovation (CO&I) is the team behind the cloud. Within CO&I, the Datacenter Engineering (DCE) team is responsible for delivering core datacenter infrastructure for Microsoft’s cloud business. The MS portfolio consists of complex, multi-disciplinary, large scale, multi-year datacenter construction and lease projects. We are looking for a passionate, high-energy individual to help build the cloud datacenters that power the world’s largest online services.

In alignment with our Microsoft values, we are committed to cultivating an inclusive work environment for all employees to positively impact our culture every day.

Responsibilities

The APAC Datacenter Engineering Senior Mechanical Engineer will be part of the team responsible for the development of Microsoft’s industry-leading datacenter designs.

This position is a Subject Matter Expert providing key input to other organizations and stakeholders. The successful candidate will be a professional mechanical engineer with extensive experience in datacenter mechanical engineering (HVAC, Plumbing, Fire Protection, Fuel Oil and BAS systems), design, construction, and operations. This individual will also review and coordinate the delivery of complex datacenter mechanical systems, associated controls, and overall topology.

The SME will be responsible for:

• Design decisions related to datacenter projects including new construction, expansions, retrofits and upgrades and standards upgrades in the APAC region.
• Detailed understanding of mission-critical datacenter HVAC cooling systems, cooling equipment selection, plumbing systems, fire protection systems, fuel systems and mechanical Building Automation System (BAS) controls.
• Responsible for overseeing the specification and drawing development detailing all mechanical systems
• Critical assessments of designs and decisions and support in applying the required standards and country-specific regulations to make the best design choices.
• Engage and manage external design consultants, run design workshops to ensure they deliver a design to meet the requirements of the Basis of Design (BOD).
• Collaboration with Global Technical Excellence team, Global Strategy team and DC Operations teams to develop datacenter designs from Basis of Design (BOD) to Issue For Construction (IFC) and through the Construction Administration phase of the datacenter until handover for new project build outs.
• Interface closely with the procurement team, the manufacturers, and the global and local engineering teams to deliver the mechanical solutions needed for each project.
• Assisting Operations teams with mechanical system solutioning and working with Operations and equipment vendors for implementation as well as assisting in commissioning activities to validate performance, quality, and reliability.
• Some travel to sites for “Factory Witness Testing”, consultant/vendor interaction in the design process, as well as for final commissioning of the installed systems.
• Collaboration with internal and external customers, lead the direction of the mechanical designs and oversee the delivery of multiple, concurrent, complete datacenter design solutions aligned with scopes, schedule and budgets of the projects.
• Supporting requests, liaise with customers to develop specific project design requirements, liaise and collaborate with other Microsoft engineering teams and Operations providing support as and when required for new and existing datacenters.

Qualifications

• Bachelor's Degree in Mechanical Engineering, or related field AND 4+ years related technical engineering experienceOR Master's Degree in Mechanical Engineering, or related field AND 3+ years related technical engineering experience OR Doctorate in Mechanical Engineering, or related field OR equivalent experience.
• Related technical experience in consulting engineering / construction / operation which involves design, engineering, construction, operation or maintenance of large scale and complex mission-critical mechanical (HVAC, Plumbing, Fire Protection, Fuel Oil, BAS) systems
• Technical understanding of mission critical environments.
• Strong experience with the operation and maintenance of building cooling and related mechanical systems (HVAC, Chilled Water, DX Refrigerant, Evaporative, and related controls systems)
• Knowledge of construction techniques and terminology including the ability to read and interpret blueprints, construction drawings and documents is essential.
• Familiarity with CFD modelling
• Sound knowledge of building codes and regulations.
• Ability to perform complex business case analysis to justify technical decisions
• Ability to lead teams of engineers in advanced engineering and operational processes and procedures as they relate to large datacenter environments
• Must possess strong leadership competencies and willingness to collaborate and work cross- functionally to maximize business results and positive customer experiences
• Experience managing both internal and external vendors, with a proven ability to manage and monitor progress to ensure objectives are achieved for outsourced project efforts
• Strong interpersonal, communication, and presentation skills at varying levels of business up to and including business executives
• Ability to manage, prioritize and successfully execute multiple concurrent mission-critical infrastructure projects
• Excellent analytical and organisational skills.
• Be a person of integrity, be methodical, detailed-oriented with a strong work ethic.
• Excellent problem solving, judgement, team building and decision-making skills.
• Ability to travel domestically and internationally.

Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to, the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.

While not required, we also look for the following Preferred Qualifications:

• Bachelor's Degree in Mechanical Engineering, or related field AND 8+ years related technical engineering experienceOR Master's Degree in Mechanical Engineering, or related field AND 6+ years related technical engineering experience OR Doctorate in Mechanical Engineering, or related field AND 3+ years related technical engineering experience OR equivalent experience.
• Professional Engineer or Registered Engineer

Benefits/perks listed below may vary depending on the nature of your employment with Microsoft and the country where you work.

Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations.

What will you do?

• Takes ownership for validating the project’s statement of work and contract terms with the customer, including both technical and commercial elements, becomes lead contact for customer for balance of project order. (Project Initiation).
• Develops a project schedule and communicates with the customer to ensure expectations are being met. Direct engagement with internal manufacturing facilities and third party vendors. (Project Planning).
• Monitor the execution of the customer’s project order, verifying execution of the project through kick-off meetings, communication to all parties and exchange of technical requirements and project plan information, performance of factory acceptance, site acceptance, site energization preparation. (Project Execution)
• Lead the monitor and control of the performance of the customer’s project through its lifecycle. Key activities include task completion verification, project team monitoring, managing the exchange of project updates across the project team members, schedule reporting, issue resolution, and contract administration. (Monitor and Control Project Work)
• Lead the closeout of the customer’s project to include financial reconciliation, verification of job site equipment arrival, installation, start-up, and training support completion through review of internal system information, contact with the customer, and coordination with support services such as field services, after-shipment support, and training functions. (Project Close)
• Compares/differentiates/propose alternate products with additional customer value compared to competition.
• Solves problems with customer interaction that results in positive feedback and improved relationship.
• Utilizes a base knowledge of Schneider Electric products and their use would be an advantage and demonstrates an understanding of the fundamental knowledge, processes and terminology needed for effective project management.
• Manage, control and supervision of site activities, including preparation of method of statement, site risk assessment, liaise with customer’s safety personal and provide guidance and instruction to vendor for installation, testing and commissioning

What qualifications will make you successful?

• Diploma / Degree in Electrical Engineering or Equivalent.
• 3-5 years proven track record in managing electrical equipment and package projects
• Familiar with standards and regulatory requirements.
• Commercial and legal implications of contracts.
• Good understanding of budgeting and financial implications, including cash flows
• Proficient in English and computer literate.
• Good knowledge of contract law and trade documents, project management.
• Good knowledge of electrical distribution systems and standards.
• Proactive & able to work independently.

• Hand on install automation machines & systems with meeting planned project & production schedule.
• Maintain and suggest improvement for existing automated production lines.
• Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.
• Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.
• Coordinate with internal team (Sales, Quality, Project, Production, maintenance) and external supplier to make projects successful.
• Participate of root cause analysis of product failure within cross functional team.
• Prepare machines preventive maintenance check list and train operation & maintenance staffs.
• Monitor automation system performance and provide support & perform service production automation line when necessary.
• Any other duties as and when assigned.
• Adhere to workplace health and safety. Abide by all EHS policies and procedures

Requirements

• Diploma of Engineering in Automation / Mechanical /Mechatronics / or equivalent. Fresh graduates are welcome, on job training will be provided.
• ITE with serval years’ experience are welcome.
• Experience in automation machine design are advantages.
• Hands-on experience of electrical and mechanical assembly & installation
• Knowledge on Mechanical/Mechatronics/Electrical components.
• IT skills (MS Office)
• Communicate well in English

DUTIES

· Plan and manage manufacturing processes from raw material receipt to finished

· part shipment.

· Create or revise work instructions and develop new processes according to

· Engineering drawings and standards.

· Design Jig & Fixture to support CNC section.

· Develop Advanced Product Quality Planning, carry out associate training and a

pre-production trial project.

· Assist Production in fulfilling technical and quality requirements.

· Manage technical changes to fulfill customer requirement.

· Providing assistance with the RFQ proposal process and development.

· Any other ad hoc duties as assigned.

REQUIREMENT

· Diploma/Degree in Mechanical / Precision Engineering or other relevant discipline.

· Minimum 3 years of experience as a process engineer in the Manufacturing

industry or equivalent.

· Experience with Master-CAM Programming are preferred.

· Experience of hands-on CNC Milling/Turning fabrication.

· Good problem-solving skills.

· Proficient in Microsoft Excel functions.

· Systematic and meticulous in approach.

· Good communication skills & acts as a team player in a small dynamic team.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for QA/QC Engineer (Contract) to make an impact! In this role, you will be accountable to build and drive the quality processes, execution and teams for its Data Centre projects in APAC. You will work closely with the project sponsors and project management team to define the project objectives, create a plan for executing those objectives. Dependant on the systems demand, the role will include working on multiple projects or directly on a single specific project in APAC.

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Ensure Quality-related activities on the Project are compliance to Corporate, Project, and other applicable Regulatory requirements.
• Implement BIM360 QA/QC dashboards to show overall KPI metrics and status, and manage documentation tracking, distribution and submission through various collaboration tools.
• Generate Project high-level Plans/Guidelines to provide roadmap for key Quality related activities.
• Ensure knowledge transfer / lessons learnt of execution issues to local customer & SE teams. Ensure compliance to overall program.
• Ensure adequate and suitably qualified Quality team resources are available to support Project Quality requirements.
• Involve in Project Review in conjunction with Engineering/Construction phases of the Project and ensure appropriate closure of observations/issues raised from review, generation of final review closeout report.
• Ensure Project SOP’s/Plans/Guidelines are appropriately authorized for implementation and adequate training provided.
• Develop, implement and manage an effective Audit Schedule focusing on the key work processes, and design activities undertaken during the project lifespan.
• Review and approve Quality Records/Reports, Engineering Drawings, Change Notices/Design Modifications, Quality Plans, Inspection Test Plans, etc.
• Conduct and maintain training program for relevant project personnel for Project SOP’s/GDP/GEP applications.
• Continually identify and proactively manage project risks and issues, ensure execution of corrective action plans up to closure.
• Implement systematic documentation turnover system for all Project Quality related documentation.
• Manage day-to-day activities of the Project walk down teams.
• Plan, prepare, review and execute project system walk down packs to transfer punch items into Master Punch list database (BIM360), approval and issuance of Construction Completion Certificate.
• Provide support and advice on Quality-related issues and resolution of engineering-related disputes.
• Responsible for any other related QAQC matters as requested by management.
• Be seen as the trusted advisor for our customer.

What qualifications will make you successful?

In this role practical experience will carry a high weighting than formal qualifications: -

• Bachelor’s Degree in Engineering or any other related discipline from recognized university.
• Minimum of 5 years of relevant work experience in BMS, HVAC, or Industrial Controls / Automation industry.
• Has an excellent working knowledge of the technical and operational environment in which the project deliverables are created and in which they are used.
• Must be an excellent communicator at all levels both internal and external in the project environment, be proactive and exhibit strong leadership qualities and be able to adapt to a dynamic and geographically disbursed environment.
• Position is to be base at client’s site.
• Able to commit to the full duration of the contract

What's in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee
• Worldwide Employee Stock Ownership
• ...... and more!

Let us learn about you! Apply today.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

PROGRAMMES EXECUTIVE (EVENTS)

As our Programmes Executive (Events), you will report to the Manager, Recreation Programmes & Engagement and Assistant Manager, Programmes. This position involves planning, administering, organising and executing of recreation programs for our members.

Responsibilities:

• To assist in the planning, coordination, organising and execution of all social events, activities and programmes for our Club member.
• To support in the promotion and engagement of a wide diverse range of social programmes to interests the members to sign up for the programme related events and outreach efforts.
• To support in the marketing and promotion strategies to help raise the awareness and participation rate of the programmes.
• Assist in the contributing more new social programmes and event ideas that attracts all demographic.
• To adhere to the Club rules and regulations when organising social programmes and events.
• Work closely with the team and events/programmes partners, instructors and sponsors.
• To assist in all the administrative work of organising social programmes.
• To assist the Club’s members on the inquiries of all social programmes.
• Perform any other duties as assigned by the Manager and Assistant Manager, Programmes.

Requirements:

• Min. Diploma with at least 1 year of relevant working experience in an event organizing or co-ordination
• Able to concurrently plan & organise multiple events / activities to meet deadlines
• Willing to work extended hours including weekends and public holidays when necessary
• Good planning, organising and customer service skills
• A team player
• Able to start work within short notice (an advantage)

Starting salary will commensurate with qualifications and relevant work experience. We regret that only shortlisted candidates will be notified.

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Mission Software & Services

Our Mission Software & Services business provides leading-edge mission critical command, control, and communications (C3) systems with secured IT infrastructure and managed services. We support our client’s innovation journey through design thinking, analytics, and AI-enabled decision support with our full suite of cloud computing solutions. We provide intelligent, actionable insights and sustainable solutions to our valued partners in diverse industries including defence, government, and commercial sectors.

Together, We Can Make A Significant Impact

We are seeking for a highly motivated Cloud DevOps Engineer with a strong passion for automation to join our team. The ideal candidate should have experience in building and managing AWS infrastructure and should be proficient in Infrastructure as Code and automation tools to enhance security, availability, and drive efficiency.

You will be a key technology partner to our customers in the Defence sector to thrive on developing the next breakthrough for the defence and security of Singapore. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a development team to develop, test and deploy system/network infrastructure as part of an overall project implementation.

Be Part of Our Success

• Design, build, and maintain AWS infrastructure using infrastructure as code (IaC) tools like GitLab, Terraform, Sentinel and Ansible.
• Improve efficiency and robustness of Control Tower/Landing Zone pipelines, workflows, Lambda functions and CloudFormation stacks/stacksets.
• Continuously improve operation excellence and efficiency by automating routine tasks using AWS native tools like AWS Lambda, Step Functions, and AWS Systems Manager.
• Collaborate with Enterprise Application engineers to ensure that automation tasks are aligned with business requirements.
• Troubleshoot and debug issues related to AWS resources and infrastructure.
• Implement security measures to protect AWS resources.

Qualities We Value

• 3-5 years of relevant working experience
• Strong technical knowledge on RHEL or Windows Operating System
• Proficient in automation tools like AWS Lambda, Step Functions, and AWS Systems Manager
• Experience in CI/CD and Infrastructure as Code tools like Gitlab, Terraform, CloudFormation and Ansible
• Familiarity with scripting languages like Python, Bash, and PowerShell
• Strong understanding of security best practices in AWS
• Cloud certification (AWS / Azure / GCP) will be advantageous
• Knowledge in Active Directory, Public Key Infrastructure or Networking will be advantageous
• Excellent communication and collaboration skill

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

What You’ll Do

We are seeking a Solutions Engineer - Artificial Intelligence (AI) to join our dynamic sales team. As an SE (AI), you will drive the adoption of our AI solutions across various industries. You will identify potential clients, understand their specific needs, and provide tailored AI solutions that enhance their business operations. This role requires a deep understanding of AI technologies and experience relaying technical concepts to a diverse audience.

Who You’ll Work With

The Cloud + AI Infrastructure team delivers one scalable strategy with local execution for data center customer transformation and growth. We are the worldwide go-to-market compute and data center networking engine gathering market transitions and allowing sellers to expand growth for customers and Cisco. Alongside our colleagues, Cloud & AI Infrastructure builds the sales strategy, activates sellers and technical communities, and accelerates selling.

Who You Are

You will build awareness, fostering education and driving energy for AI with both internal and external team members, partners, etc. You will also act as a link between technical teams, account teams, executives, partners/customers. In addition, you will show case AI solutions/products, its potential and promote its tactical and technical responsibilities. You will play an important role in the design, development and promotion of AI Solutions and address challenges. You will need to travel as needed to meet with clients and attend industry events.

Minimum Qualifications:

• 6+ years of technical presales experience selling Compute, Storage, and Network solutions.
• Proficiency in Python (must), MySQL, Github, Git, GO, ETL, OLAP, RDBMS, Scribus, AWS, Azure, Google, IBM Cloud, or other platforms and programming languages.
• Experienced with databases (Oracle, PostgreSQL, MySQL, MongoDB, Cassandra, Redis, Snowflake, BigQuery) and AI/ML frameworks (scikit-learn, TensorFlow, PyTorch, Hugging Face).
• Ability to provide detailed and consumable documentation of standard methodologies for deployment around application acceleration, automation/management efficiencies, enterprise edge, and AI/ML solutions.

Preferred Qualifications

• Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering, or related field. Advanced degree is a plus.
• Excellent presentation skills – ability to deliver engaging workshops to both technical and non-technical audiences on AI topics
• AI experience with Nvidia, IBM, Microsoft, Dell, NetApp, HPE, and/or other AI vendors
• In-depth understanding of language models, including but not limited to GPT-3, BERT, or similar architectures.
• Expertise in training and fine-tuning LLMs using popular frameworks such as TensorFlow, PyTorch, or Hugging Face Transformers.
• Experience in deploying LLM models in cloud environments (e.g., AWS, Azure, GCP) and on-premises infrastructure.
• Familiarity with containerization technologies (e.g., Docker or equivalent experience) and orchestration tools (e.g., Kubernetes) for scalable and efficient model deployment.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Why Cisco?

#WeAreCisco. We are all unique, but collectively we bring our talents to work as a team, to develop innovative technology and power a more inclusive, digital future for everyone. How do we do it? Well, for starters – with people like you!

Nearly every internet connection around the world touches Cisco. We’re the Internet’s optimists. Our technology makes sure the data traveling at light speed across connections does so securely, yet it’s not what we make but what we make happen which marks us out. We’re helping those who work in the health service to connect with patients and each other; schools, colleges, and universities to teach in even the most challenging of times. We’re helping businesses of all shapes and sizes to connect with their employees and customers in new ways, providing people with access to the digital skills they need and connecting the most remote parts of the world – whether through 5G, or otherwise.

We tackle whatever challenges come our way. We have each other’s backs, we recognize our accomplishments, and we grow together. We celebrate and support one another – from big and small things in life to big career moments. And giving back is in our DNA (we get 10 days off each year to do just that).

We know that powering an inclusive future starts with us. Because without diversity and a dedication to equality, there is no moving forward. Our 30 Inclusive Communities, that bring people together around commonalities or passions, are leading the way. Together we’re committed to learning, listening, caring for our communities, whilst supporting the most vulnerable with a collective effort to make this world a better place either with technology, or through our actions.

So, you have colorful hair? Don’t care. Tattoos? Show off your ink. Like polka dots? That’s cool. Pop culture geek? Many of us are. Passion for technology and world changing? Be you, with us! #WeAreCisco

• Oversee the installation, configuration, and upkeep of computer hardware, networks, and systems.
• Provide technical assistance and resolve issues related to hardware, software, network connectivity, and printers for end-users.
• Collaborate with users and IT vendors to deliver IT services and solutions effectively.
• Manage and implement data protection protocols and cybersecurity measures, ensuring robust security configurations and regular maintenance.
• Assist in the acquisition, procurement, and documentation of IT assets.
• Offer support for IT infrastructure, including system setup, software upgrades, and the installation of system patches.
• Configure and manage Microsoft 365 services like Exchange, SharePoint, and OneDrive, including user setup, licensing, and essential functions.
• Apply and maintain Microsoft 365 security policies and tools, such as Entra ID, Intune, Purview, Cloud Defender, and Multi-Factor Authentication (MFA).
• Hands-on experience managing Microsoft Windows environments, providing troubleshooting and email support.
• Perform other tasks as delegated by management.

Job Requirements:

• Min Diploma in Computer Science or relevant Degree qualification in a related discipline
• Strong working experience with Microsoft 365 administration
• 4 years of relevant working experience

Check out Aber Care Website for more details.

Interested applicants please email your detailed resume to [email protected]

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504|