As a GQ (Global Quality) Package Reliability Process Engineer, you will be responsible to setup new product package reliability requirement. This includes board level reliability to emulate customer PCB design. As process engineer, you are required to ensure the process control during package reliability and establish procedures to the operation team for execution. Process improvement is also required to ensure cost and productivity gain.

Coordinating with various functional parties and ensuring the reliability process is compliance to industrial standards such like JEDEC and this will not limit to Micron specification. Additionally, you will respond to inquiries from internal and external customers as a subject matter expert for package reliability activities.

Responsibilities and Tasks

Package Reliability Process Development

• To work with engineering team for enablement of new product (NPI)
• Ensure hardware readiness for package reliability process like Temperature Cycling, HAST, HTS and etc.
• Modify and improve reliability process for existing products

Evaluate and Improve Processes, Materials, and/or Equipment

• Identify, investigate, and document process deviations.
• Troubleshoot process deviations using systematic troubleshooting techniques.
• Perform risk assessment at all decision points within the qualification cycle
• Develop Process Reliability Methodology and Qualification

Lead development/improvement of Process, Equipment and/or Material

• Establish engineering evaluation (DOE)
• Identify factors that impact process quality and propose solutions
• Identify and evaluate interactions between equipment, processes and resolve potential issues
• Identify and implement equipment process control methods
• Develop process limits and capabilities (CpK) and lead process improvement

Introduction of New Process and Process Changes to Operation

• Implement new standard to align with changes of industrial standard for reliability process procedure.
• Conduct training/briefing for operation team on operation procedures
• Develop process reliability tests to assess new process failure mechanisms
• Ensure that test methodology follows industry standards, such as the Joint Electron Devices Engineering Council (JEDEC)
• Define process sampling plan and instruction.
• Strong trouble shooting skill using 8D
• Analyze and report results
• Analyze failures and coordinate failure analysis
• Develop process monitor plan
• Support Excursion Material Disposition

Establish documentation and procedure

• To establish document for new process and revise existing procedure whenever applicable.
• To ensure compliance to internal and external audit
• Observe all established EHSS policies, requirements, and procedures
• Follow EHSS guidelines included in work instruction

Education

Required

Bachelors Degree or equivalent experience

Engineering – Electronics/Electrical

Engineering - Materials Science

Engineering - Mechanical

Related field of study

Experience

Required

• Fresh graduates are welcome.

Familiarity with basic semiconductor processing, device physics, quality, and reliability fundamentals

The high degree of self-initiative and ability to think and act independently

Good multi-tasking and problem-solving skills

The ability to work under tight timeframes and prioritize competing activities

Excellent organizational and management skills and outstanding interpersonal and teamwork skills

The proven ability to collaborate well with team members and drive for results

Strong verbal and written communication skills

The ability to collaborate with cross-functional teams to understand needs and translate them into actionable plans, deliverables, and resource requirements

The ability to effectively interact with a wide range of personalities

The ability and willingness to travel when required.

We are looking for a passionate and motivated individual for this position.

• Welcoming the customers
• Introduction of Food and Beverage Menu
• Taking of orders & cashiering
• Serving of food & beverage
• Preparing basic food & beverage items

Requirements:

• Min 1 year of relevant experience
• Customers oriented
• Enjoy interacting with customers
• Familiar with industry's best practices
• Positive and energetic personality
• Able to multitask and work efficiently under pressure

Desktop Engineer

• Install, upgrade, support and troubleshoot Windows 7 ,Windows 8.1, Windows 10 and Microsoft Office
• Dealing with hardware and application support queries and issues reported to the support desk and escalated to the Desktop Support Engineers
• Provide user data and application recovery
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software
• Use tools and methodologies to load, copy and customize operating system configurations for deployment
• Responsible for tracking hardware and software inventory
• Familiarize end users on basic software, hardware and peripheral device operation
• Take ownership and responsibility of queries, issues and problems assigned to the Desktop Support Engineers
• Works with vendor support contacts to resolve technical issues within the desktop environment
• Escalate issues and involve experts wherever required in order to resolve issues as quickly as possible and any other authorised desktop applications & Microsoft or related security patches/Policies
• Install, upgrade, support and troubleshoot for printers, computer hardware and any other authorised peripheral equipment
• Performs general preventative maintenance tasks on computers, laptops, printers and any other authorised peripheral equipment
• Performs remedial repairs on computers, laptops, printers and any other authorised peripheral equipment
• Customize desktop hardware to meet user specifications and site standards
• Provide VIP support (Preferred)
• Resolve and update incidents with in SLA and also update stakeholders for P1 cases
• Update KB with solution provided

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

Outbound Call Associate

• Proactive contact and engage customers to gather critical information through survey, telemarketing activities
• Meet and achieve the individual and company’s key performance indicators
• Acquire a strong knowledge of the products and services, culture and processes
• Provide quality customer service and prompt follow-up to customers over the phone and/or email
• Listen to customers’ needs, probe to redirect to the intent of the question and offer alternative solution
• Resolve customer queries efficiently and escalate issues promptly
• Submit regular reports to Team Lead and propose new ideas and strategies to improve work performance
• Other duties as assigned by Team Lead and/or Branch Head

Front-Desk Support

• Flexible to be deployed to various locations around Singapore (North/East) occasionally

• Proactive manage all front desk duties over the counter, phone and email

• Identify, profile and tier customers to the types of services that are relevant to their needs

• Ensure smooth customer transactions at all times and provide quality customer services

• Perform administrative duties, manage appointments and register customers

• Prepare room logistics and necessary materials

• Other duties as assigned by Team Lead and/or Branch Head

Requirements :

• GCE 'N' level/ Nitec/Diploma
• 1-2 years customer service experience.

Interested candidates, please click on “Apply Now”. Alternatively, you may email us detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Daniel Lee / EA Reg. No : R1989151

Responsibilities

• Ensure Glory meets all contracted obligations, response times, repair times, Preventive Maintenance, minimise repeat call
• Get involved with day to day Repair activities when the workload suggests an SLA breach
• Support both domestics and regional customers’ repairs

Qualifications:

• Recognised technical qualification

Experience:

• Minimum 3 years’ experience in a technical support role handling complex technical issues
• Customer facing experience

Skills and Attributes:

• Excellent communication (written and verbal) and interpersonal skills
• Ability to work independently and set priorities to meet customer and organisational expectations
• Proven problem solving and analytical skills
• Excellent organisational skills
• Strong customer service orientation
• Ability to handle high-pressure situations
• Self-motivated with the ability to meet deadlines
• Commercial awareness
• Ability to engage and motivate team members

Job Description:

• Responsible for projects detail design, prototype, commissioning and testing completed systems
• Liaise with Customer and internal team members to ensure good co-ordination, planning and meeting project schedule
• Coordinate and manage factory testing in both company premises and customer’s site.
• Responsible for integration of both hardware & software work as well as implementation
• Carry out proper execution of the integration/engineering/maintenance work and QA Technical checks throughout project execution
• Handel application programme change management, hardware deployment management & documentation
• Implantation of SCADA project from concept to design and programming
• Interface with SCADA & PLC programming
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently

Job Requirement:

• At least Degree in Electrical/Electronic or related discipline
• With at least 3-5 years of experience in SCADA
• Able to read and interpret electrical schematics, plans, drawing etc.
• Able to work under pressure, multi task and good coordination of tasks
• Good interpersonal skills, able to work both independently and in teams

Sales and Program Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diplomas in Mechanical / Mechatronics Engineering
• Minimum 2 to 3 years in managing and developing local/oversea Sales accounts in the Automation, Semiconductor or Consumer Electronic industries.
• Relevant technical experience in manufacturing process, automation & semiconductor industries an added advantage.
• Regional travelling is expected

Jobs Scope:

You are responsible for the sales & program management of multi- million dollars automation equipment business and providing excellent customers fulfillment, meeting quality and cost goals.

• To provide Sales Projection and Forecast
• Identify business opportunities to expand customer base
• Identify and develop potential customer to increase market share and sales revenue.
• Conducts sales calls, prepares and performs product presentations and RFQ process.
• To formalize the quotation, submission to customer and follow up.
• Develop a sales strategy plan for business expansion and attending industry events to build relationships with key prospects
• To provide leadership and organization skills in coordinating activities of various teams.
• Maintain the effective communications and coordination with customers and within the company
• To establish rapport, relationships with customers and providing excellent customers management services
• To maintain constant communication and liaison with customers on future projects

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Mechanical Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Prepare equipment specifications, requisitions, and conduct technical bid evaluations.
• Review and assess vendor bids and documentation for technical suitability, providing valuable recommendations.
• Collaborate with the Process Discipline and review equipment process data to ensure consistency.
• Foster effective communication and information exchange with other design groups, offering technical support as needed, and ensuring seamless interfaces between relevant drawings.
• Ensure compliance with the Client's Standards and Engineering Practices, following the Project Coordination Procedure diligently.
• Exercise control over Vendor's drawings and documents, ensuring adherence to PO requirements, and facilitating information exchange with other disciplines.
• Review and provide constructive feedback on various documents, including flow sheets, P&ID, equipment lists, plot plans, performance curves for pump, motor, and air blower, equipment foundation drawings, etc.

Requirements:

• Minimum of Bachelor Degree in Mechanical Engineering
• Minimum of 5 years hands on experience in handling Basic and Detail Engineering jobs for Oil & Gas or Offshore & marine industry.
• Good knowledge and hands on experience with international codes & standards
• Knowledge of Microsoft Office 365, AutoCAD LT and Navisworks

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Customer Service Executive | Toa Payoh

Salary: $2,500 - $3,000

Working hour: Monday - Friday (8:30AM – 6:00PM)

Working location: Toa Payoh

Job Responsibilities:

• Answer customer calls and register them in the service management system following the call management process and quality compliance requirements
• Assign and dispatch Field Services Engineers (FSE’s) to assign service orders based on the advice of the FSE with helpdesk / response center duty or the Team Lead Field Services (or Service Delivery Manager) in the district
• Coordinate inbound / outbound delivery of parts, and local shipment to customer site
• Plan & coordinate the Preventive Maintenance schedule with customers & FSE.
• Escalate to CS Delivery Manager for non-compliance
• Prepare services and spare parts quotations to customer following the Quotation Process and process customer purchase order for services and spare parts
• Compile service reports, parts delivery notes and other supporting documents for the purchase order invoicing
• Create quote based on requested services from a customer and send the approved quote to the customer.
• Follow up delivery status of ordered spare parts. Identify delivery issues and take corrective actions timely by working closely together with suppliers and physical distribution to resolve the issues
• Knowledge in using vlookup and pivot table in Excel is added advantage
• Any adhoc duties assigned by Superior from time to time.

Job Requirements:

• Minimum GCE "O" Levels or above
• At least 2 years of relevant experience
• Proficient in SAP, MS Office Applications and possess good knowledge of Excel (Pivot table and vlookup)

For complete list of jobs opportunities please visit

Supreme Full Jobs List

Part Time / Contract Staffing Telegram Group

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Responsibilities:

• Serve as the first point of contact for customer inquiries via phone, email, or chat, providing prompt and courteous responses.
• Efficiently address customer concerns and issues, striving to achieve satisfactory resolutions and ensuring customer satisfaction.
• Manage customer complaints with professionalism, track progress, and provide regular updates until resolution.
• Maintain a deep understanding of our company services, pricing, contracts, and environmental initiatives.
• Maintain accurate and organized records of customer communication, service requests, and issue resolutions.
• Gather customer feedback to identify areas for improvement and provide input for service enhancements.
• Assist the sales team in coordinating customer meetings and follow-ups, supporting the sales process when required.
• Generate and compile reports on customer inquiries, complaints, and feedback to inform management and improve service quality.

Requirements

• Minimum Diploma in Business / Business Administration or equivalent
• At least 1 year of relevant customer service experience
• Good communication and analytical skills
• Able to work well in a team
• Good incentive scheme

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number:17C8690

Please Provide:

1) Availability
2) Current/ Expected salary
3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Our client is a one of the leading players in the FMCG industry. Due to business needs, they are now recruiting a Automation Engineer to be part of their Logistics team to support their business needs. They are located in the West - easily accessible.

Job Description:

• Oversee the testing, operation, and upkeep of automated machinery.
• Contribute to the development and execution of Logistics System enhancements.
• Compile project materials, conduct cost analyses, estimate annual retrofit budgets, and manage spare parts inventory.
• Sustain the performance and reliability of all automation and network systems within the automation layer.
• Analyze equipment reliability using error logs, event reports, and data from computerized maintenance systems.

Requirements:

• Diploma/Degree in Mechatronics, Engineering, or a related field
• Experience with automation control products such as Siemens IPC, PLC etc.
• Comfortable with rotating day and night shifts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Responsibilities:

• Welcoming customers, informing them about specials or new items, take customer orders and preparing food and beverages to their specifications and accepting payments.
• Grilling, cooking, and frying foods.
• Constantly learn about Japanese teas and desserts and presentation techniques to improve beverage and dessert quality.
• Planning and managing work orders to ensure all items of an order are finished and served at the same time.
• Performing simple food preparation tasks
• Ordering supplies and stocking the shelves.
• Making ingredients
• Cleaning food preparation equipment and areas.
• Adhering to all food safety regulations and quality controls.
• Ensure and maintain store and personal hygiene
• Other ad-hoc duties are required

Job Requirements:
• Keen on continuous learning about food and beverage preparation.
• Exceptional listening and communication skills.
• Availability to work around peak hours, including nights, mornings, weekends, and public holidays.
• A polite and engaging personality.
• Commitment to customer satisfaction and service excellence.
• Willingness to work as part of a high-energy, efficient team in a fast-paced environment.

• Daily Update of Project/Operation Progress to immediate superior
• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime
• Attend complete orientation, introduction of superior, JSJD, clear scope of work and necessary drawing or documents on First day of work on site
• Coordinate with client and other Contractors for the project interface activities
• Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met
• Managing project deliverables in line with the project plan
• Managing project scope and change control with commercial or without commercial impact
• Monitor and ensure supervisor plan and instruct and monitor in DWI
• *Monitoring project progress and performance
• Plan monthly works schedule and set productivity to be achieved
• Prepare MSRA
• Prepare Tender Review Checklist Part 1, 2 & 3, ATQ & Notice of Tender Inquiry & Tender submission
• Prepare Vendor/Sub-Contractor Pre-qualification document & check list
• Prepare and update MRMS
• Project Planning, Progress Reports and Claims
• Proposed training for worker on live cable handling
• Providing status reports to the management
• Request and plan min Two days in advance for full PPE (if applicable), schedule of SIC, site location and contact Personal on the first day of work
• Responsible & accountable to ensure compliance with company, regulatory and client's policies and procedures. Ensure local regulations policies and procedures are incorporated into the business unit plan
• Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data
• To fulfill and achieve higher weekly and daily target
• To monitor the progress of projects against planned
• To plan, monitor and ensure manpower, materials, equipment and tools are ready for day to day work activities
• To take on additional appointments from time to time assigned by the company's authorized officer, and carry out the duties of such appointment duly and diligently to enhance the company image and to improve the company's business opportunities
• To verify technical specifications for adequacy
• Update and report daily progress status and look ahead minimum 3days plan
• Working closely with main contractor and client to ensure the project meets the required needs
• Supervising the project at all stages and providing solutions to problems
• Collaborating with site managers, surveyors, engineers, site worker and other professionals

about the company

My client design and manufacture of equipment, precision components. As a result of ongoing and continued success in both Singapore & internationally, they are recruiting for talented candidates to join them for their expansion.

about the job

• Set up AOI & vision inspection machine
• Machine alignment & testing
• Machine troubleshooting & T&C
• Equipment maintenance & installation
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents
• Product improvement

skills & experience required

• Degree/Diploma / Higher NITEC in Electrical / Mecahnical Engineering / Manufacturing or relevant courses
• Min 3 years of experience in setting up & troubleshoot AOI/Machine Vision/Optical Inspection equipment
• Technical support on AOI / vision inspection related issue
• Working experience in semiconductor industry will be a plus
• Experience in any programming language (C++ or C# or Python) is a plus

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Implement IC design development of products, Logic Synthesis and Static Timing Analysis
• Manage DFT related activities - Scan Insertion, ATPG, Pattern Validation
• Assist in debug & correct any functional issues found in taped-out devices

Requirements:

• Degree in Electrical/Electronics Engineering or equivalent
• At least 5 years of digital IC design experience using EDA tools (Cadence, Synopsys)
• Proficiency in Verilog HDL and VHDL RTL design, Logic Synthesis, DFT, ATPG, Timing Closure

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

About the role

CGS-CIMB Securities International Pte. Ltd is one of the leading integrated financial service providers in Asia. With a global presence in over 20 countries, and backed with an award-winning research team, the Company is well-positioned as Asia’s leading financial gateway, providing well researched and in-depth analysis of financial products.

You will be part of the Infrastructure Team responsible for managing CGS-CIMB network infrastructure to ensure high standards of performance as well as security and availability.

Job Responsibilities:

• Providing 24/7 on-call and office, hours on-site administration and operational support for all network equipment
• Ensuring all network support services are delivered within service level agreements
• Responsible for network design and implementation
• Managing of Cisco router, Arista wireless controller, firewalls, VPN gateways, proxy servers
• Configuration of cloud network services, network, application load balancers, VPC, provisioning, transit gateway attachment
• Perform system hardening and patch deployment
• Work on network related budget and workplan
• Management of network related contracts
• Explore new technology that could improve the workflow
• Automation of the network work process to enhance operation efficiency
• Good knowledge of troubleshooting, problem identification, problem resolution, debugging network-related problem
• Ability to self-manage projects and provide timely update on progress
• Understand latest network/security threats and issues and mitigation solutions
• Work on any other responsibilities/tasks as assigned by the management

Job Requirements:

• Diploma/Degree in any IT related fields
• Minimum 3 years of experience in network operations
• Proficient with products from Arista, Fortinet, Juniper, and Palo Alto
• Strong knowledge of OSPF, BGP routing protocol, IPSEC VPN and TCP/IP Networking
• Certification in CCNA is a must and CCNP is preferred

Responsibilities:

• Assist senior project managers in coordinating and managing solar PV projects, ensuring they are completed on time and within budget.
• Participate in project planning activities, including creating project schedules, timelines, and resource allocation plans.
• Collaborate with cross-functional teams, including engineering, procurement, and construction, to ensure seamless project execution.
• Help identify and mitigate potential risks that could impact project timelines or quality.
• Support the preparation and submission of project documentation, permits, and regulatory compliance requirements.
• Assist in monitoring project progress, tracking milestones, and reporting on key performance indicators.
• Contribute to effective communication with internal and external stakeholders, providing updates and addressing inquiries as needed.
• Participate in site visits and inspections to gain hands-on experience and understand project challenges.
• Learn to use project management software and tools to organize tasks and monitor project status.

Qualifications:

• Bachelor's degree in Engineering, Business, or a related field is preferred.
• 0-3 years of relevant working experience. Fresh graduates are welcome to apply.
• Strong interest in renewable energy and solar PV technology.
• Excellent organizational skills and attention to detail.
• Strong communication and interpersonal abilities.
• Ability to work well in a team-oriented and collaborative environment.
• Basic understanding of project management concepts is a plus.
• Proficiency in Microsoft Office suite (Word, Excel, PowerPoint).

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 3 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Description & Requirements

· Be responsible for managing day to day lifting operations for the project.

· To coordinate and oversee all lifting operation within the work site ensuring compliance with WSH Regulations & project’s HSE procedures.

· Adhere to the Company's Health, Safety & Environment policies, procedures and standards.

· Coordinate and supervise all lifting activities and ensure that the lifting operations are carried out in a professional, safe & environmentally friendly manner at all times.

· Ensure lifting equipment and lifting accessories are fully inspected, certified and maintained to a high standard.

· Ensure all relevant lifting equipment certification are recorded accurately for input to the Company's data recording system.

· Ensure that the ground conditions are safe for any lifting operation to be performed by any mobile/crawler crane

· Work closely with Lifting Supervisor and the Safety Department to identify specific training needs.

Requirement:

· Minimum 5 years of Engineering Experience with Degree in Civil Engineering or its equivalent

· Proactive, independent, able to work with minimum supervision and also work well in a team

· Must have a Lifting Engineer certificate from The Institute of Engineers Singapore, 5-Day Course for Appointed Person - Lifting Operations

This is a 12 months contract assigned to our client

Work Location: Victoria Street

Salary Range : $2,300-$2,600

Weekday shift

Shift 1 08:00 - 17:00

Shift 2 09:30 - 18:30

Shift 3 11:00 - 20:00

Saturday tentative.1 weekday off after 2 Saturdays

Shift 1S 08:00 - 12:00

Shift 2S 13:00 -17:00

Technical Helpdesk

1) Issue Management

a) Log all incoming calls and email and record sufficient information to facilitate effective incident

processing.

b) Identify the impact, urgency, and priority of incidents

2) Provide initial troubleshooting and support for incidents.

3) Escalate incidents that cannot be resolved by the service desk to the appropriate Application

Maintenance team and monitor progress.

4) Seek confirmation for closure from the user when resolution is provided.

5) Serve as the first point of contact for all incidents

6) Prepare issues statistic for reporting purposes.

7) Prepare daily, weekly and monthly report Daily monitoring

8) Liaise with client to clarify issue and assign issue to team for resolution.

9) Track and report on issues resolution.

10) Assess common issues and suggest improvement points.

11) Track and report on day-to-day operations to maintain system stability

Job Responsibilities :

• Assist Project Manager in supervising and coordinating all services and complete within programme
• Work closely to the clients, consultants and sub-contractors on technical matters
• Supervise and Coordinate M&E services work and work closely with other department staff to meet the project timelines
• Conduct in detailed, M&E coordination with all specialist contractors
• Coordinate with all BIM modelers, coordinators and Project Engineers/Project Managers of various M&E contractors
• Carry out testing and commission of M&E work
• Manage sub-con/in progress production planning & build
• Execute mechanical and electrical works in construction
• Supervise day-to-day site works
• Handle the project supervision and documentation
• Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress
• Prepare Coordinated Services Drawing (CSD), penetration drawing and coordinate with BIM team
• Ensure timely prepare and submission of CSD
• Attend progress/site/MEP meeting
• Compliance with all necessary standards, code of practice and safety regulations
• Ensure of quality of works is achieved and safety regulations are complied with
• Any other ad hoc duties assigned

Job Requirements:

• Diploma / Degree in Mechanical & Electrical Engineering or equivalent
• 3-5 years of relevant experience in M&E works
• Able to work independently
• Good safety knowledge and attitude
• Ability to liaise with statutory authorities

Job Responsibilities:

• Overall in charge for all site coordination relating to mechanical, electrical and plumbing (MEP) matters of the project. Overall responsible for all the MEP works installation and progress of work to meet contractual and specifications requirements.
• Leading in design coordination with consultants / client and authorities.
• Attend client, consultants and sub-con meetings.
• Review of shop drawings / materials / Method of Statements.
• To ensure drawing registry is maintained and latest drawings / BIM models are available for all parties involved (site staff, suppliers and subcontractors). To ensure transmittal forms / emails are issued for latest drawings / BIM models.
• Ensure that all the submittals are carried out timely and closely monitoring the progress and status.
• Resolve technical issues on drawings and liaise closely with all trades and authorities.
• Take lead in VDC for MEP related matters. Cross check BIM model with contract drawings and other disciplines, such as architectural, structural, etc.
• Review of contract documents and scope of works.
• Establish and implement quality control measures for MEP works after consulting with PM and Quality and Service Dept.
• To work with PM and Site Manager in planning and executing temporary works, in particular, the temporary services.
• To ensure all MEP submissions (as-built, COS etc) are done for RI (M&E) and TOP. To ensure that the project is ready for the RI and TOP inspections.
• Other ad-hoc duties as assigned by the immediate supervisor / management.

Job Requirements:

• Degree in Electrical Engineering /Mechanical Engineering /Building Service.
• Candidate with proficiency in BIM software such as Autodesk Revit will have added advantage.
• Minimum 5 years relevant experience in coordination and supervision of MEP works in local building construction. Preferably in high rise building projects.
• Good knowledge of MEP specifications, code of practices, standards and BCA quality requirements.

ÜberGard Pte Ltd began its operations in 2009 to provide a one stop centre for research and development of Smart Security Control System and web enabled building facilities system. Leveraging on our experience and commitment, we have successfully developed the innovative product - Intelligent Key Lock Application System (iKLAS) and have won several numbers of contracts in the area of security systems.

Job Responsibilities

• Organise the scheduling of maintenance service jobs and preventive maintenance works at customers’ sites
• Provide customer service support to inform customers the details of scheduled maintenance works at their premises and apply for clearance where necessary
• Manage the issuance of and follow through to ensure information from service reports are properly recorded and filed
• Assist with the processing of purchase orders received from customers
• Assist with goods receipt and goods stock out / delivery orders
• Follow up with generation of invoices for ad-hoc service jobs and parts used to send out to customers
• Answering of phone calls and transferring calls to relevant parties
• Manage stock inventory for replacement parts held by maintenance support team
• Other ad-hoc jobs as required

Requirements

• Minimum Diploma in Business Studies or equivalent
• Minimum 2 years’ relevant working experience
• Proficient in English and Chinese
• Good customer service skills
• PC proficient and well-versed in MS Office applications
• Preferably possess knowledge of Globe3 software
• Responsible, meticulous and able to work with tight deadlines
• Able to work independently with little supervision and be a team player

Please bring along testimonials and certificates.

Job Description

As a Senior/ Infrastructure Engineer, you will assume the responsibility of conceptualising and crafting cloud and infrastructure solutions, ensuring seamless integration into diverse on-premise or SaaS environments. Leveraging comprehensive expertise across vertical and horizontal technologies, your focus will be on refining, fortifying, and providing solutions to our clients. This entails overseeing the holistic technical design, encompassing infrastructure elements, integration, connectivity, and hosting.

Roles and Responsibilities

• Managing the project lifecycle of infrastructure setup and implementation for our clients.

• Designing and implementing infrastructure solutions, incorporating multi/hybrid cloud design principles.

• Continuously researching and evaluating new solutions and technologies, integrating insights and recommendations into the development process.

• Demonstrating expertise in the products and solutions of major Cloud Service Providers.

• Specialising in best practices for the design, operations, and support of private/public/hybrid cloud infrastructure, covering Network, Storage, Compute, and Security.

• Identifying potential and emerging technologies with relevance to innovation for the company.

Qualifications and Requirements

• Diploma/Bachelor's degree in Computer Science, Computer Engineering, Information Technology, or a related discipline.

• A minimum of 4 years experience in the design, implementation, and consulting of private/public/hybrid cloud infrastructure solutions.

• Hands-on experience and robust technical skills with a proven track record in IT infrastructure and/or emerging IT technologies engineering, specifically in Platform, Storage, Virtualisation, and Cloud infrastructure.

• Strong working knowledge and the ability to apply architecture concepts, frameworks, and methodologies to projects.

• Experience in business and technical analysis, architecture design, and project

• Possession of PMP and ITIL certifications is considered an added advantage.