Job Description:

• Perform the maintenance service in a proper and correct manner as stated on the checklist.
• Attend emergency breakdown service as instructed by the team leader.
• Carry out testing & commissioning for A&A work and run the small size of project.
• Provide technical support to the Application Team.
• Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader.
• Attend joint testing with Project/ Application Dept, if required upon instruction from the Team Leader.
• Liaise with sub-contractor to perform site survey for A&A work and provide detailed information on equipment quantity and method for the installation to the senior to prepare quotation.
• Ensure workmanship and quality of any equipment to be installed at site.
• Conduct in-house training when is required.
• Perform standby duty and other ad hoc duties as assigned.

Job Requirements:

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

1.Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner.

2.Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.

3.Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

4.Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

5.Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

6.Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

JOB DESCRIPTION:

To carry out field service attendances to troubleshoot & repair cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

To carry out field service attendances to troubleshoot & repair cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

The successful candidate will have solid working experience with Crane and repair machinery makers such as:

MacGREGOR

IHI

MITSUBISHI

LIEBHERR

TTS

TSUJI

HATLAPA

PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE ALSO:

1. Experience in Inspection and Troubleshooting:

minimum of 3 years of experience in inspecting, troubleshooting, and repairing hydraulic systems, which is relevant to process industries that often utilize similar hydraulic machinery for operations.

2. Knowledge of PLC and Electro-Hydraulic Systems:

In-depth knowledge of PLC-controlled electro-hydraulic systems, as process industries frequently employ automation and control systems to enhance operational efficiency.

3. Reading Technical Diagrams:

The ability to read and comprehend electric and hydraulic diagrams, where understanding complex systems is essential for maintenance and troubleshooting.

4. Independent Problem Solving:

Stress the capability to independently troubleshoot electrical, hydraulic, and mechanical problems, which is vital in process industries where downtime can lead to significant losses.

5. Supervisory Skills:

The experience in supervising a team of mechanics and leading large repair projects can be translated to managing teams in process industries, ensuring that projects are completed efficiently and safely.

6. Technical Reporting and Communication:

The ability to write technical reports and communicate effectively with stakeholders is important in process industries for maintaining compliance and ensuring that all parties are informed about project statuses.

7. Additional Skills:

Mentioning experience with variable frequency drives (VFD) is particularly relevant, as VFDs are commonly used in process industries for controlling motor speeds and improving energy efficiency.

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Job Description:

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.
• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.
• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.
• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.
• Manage all orders efficiently until fulfilment stage, by working closely with Service team.
• Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.
• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Job Requirements:

• NTC2 or Diploma in Electrical/Electronic/Process Instrumentation / /Mechatronics Engineering
• Preferably experience in service/engineering position in Oil & Gas / Process industry

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Main Accountabilities:

• Commissioning of both Industrial AC and DC power systems, battery maintenance, discharging and health checks. Timely completion and reporting of commissioning documents and relevant site paperwork. Use of I.T for uploading and downloading of configuration files.

• Routine maintenance of UPS and battery systems. Timely completion and reporting of documents and relevant site paperwork. Us of I.T for uploading and downloading of configuration files.

• To liaise with other departments and engineers to ensure site visits are carried out in a professional and safe manner.

• Training of customers to use equipment and understand basic user functions.

• To cover call out rota to support customers with 24/7 Powercare cover. To work unsociable hours i.e. Night work and weekends as required.

• Expenses and time sheets to be completed and submitted in a timely manner.

• Promote AEGPS maintenance contracts and Service wherever possible

• Technical knowledge and experience brought in

• Efficiency in carry out service activities

• Number of commercial leads (improvement suggestions)

• On time service reports including timesheets

• Compliancy with health and safety measures

• Quality and accuracy of technical training and instructions given to customers and third parties

• Customer Satisfaction

Personal characteristics:

• Good interpersonal and communication skills

• Real team player

• Strong attention to detail and accuracy / following strict procedures

• Ability to effectively organize work functions

• A high degree of initiative, flexibility and ability to work in a team

• Must be willing to travel across Asia Pacific region including India, China and the Middle East. Some work may involve off shore. Candidates must have a flexible approach to travel at short notice, work irregular hours with well-developed customer care skill.

Education, knowledge and working experience:

Diploma or Degree in Power Electronics or Electrical Power disciplines

• 1-3 years of relevant experience within the industry

• Good knowledge of industrial power systems products/applications/solutions

• Diagnostic and problem solving skills

• Good base knowledge of PC (J Bus / Profibus / Modbus and other communication media) and programming skills

• Fluent in spoken and written English

• Electrical and Electronic Engineering background is a must

Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner. 2. Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions. 3. Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level 4. Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded. 5. Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature. 6. Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status. 7. Any other adhoc duties as assigned

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Key Responsibilities:

• Interacts with clients on site and remote to meet complex requirements of a solution.
• Escalates unresolved problems and issues to the relevant third parties.
• Responds to escalated client requests.
• Escalates complex problems to the relevant third parties.
• Writes reports and proposals and completes and maintains project documentation.
• Assists with the documentation of standard operating procedures relating to installations and fixes.
• Acts as coach and mentor to more junior Implementation Engineers and Technicians.
• Assumes responsibility for the coordination of the activities of the junior Engineers, in line with performance targets.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Performs any other related task as required.

Knowledge and Attributes:

• Seasoned understanding and appreciation of technical design and business principles.
• Seasoned project fundamental and administration ability.
• Seasoned project skills which are demonstrated in the execution of installations and other assignments.
• Excellent customer engagement skills
• Demonstrate relevant domain specialist knowledge.
• Excellent verbal communication skills.
• Client focused and displays a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.

Academic Qualification and Certifications:

• Bachelor's degree or equivalent in Information Technology or Computing or a related field.
• Professional level certification in different Networking technologies such as Cisco, Juniper, Aruba, F5, CCNP, JNCIS, ACMP etc.
• Cisco Dev Net certification

Required Experience:

• Seasoned work experience in technical implementation engineering, specific to Networking technologies.
• Seasoned experience engaging with clients and conducting presentations.
• Seasoned report writing experience.
• Seasoned project management
• Seasoned experience in Networking technologies such as routing, switching, Wireless, SDI distribution, core and access layers
• Seasoned experience in diagnosis and troubleshooting

Job Description

• Able to read design drawings and operate generator control panel and switchgear.
• Able to plan and arrange commissioning work at site.
• Design customized power generator control circuits with PLC programming, networking, HMI and switchgear layout.
• Work closely with Service Engineers to handle factory test in workshop and commissioning at customer's site.
• Provide assistance to Sales Engineers in technical specification and attending technical meetings at customer's site.
• Able to support and troubleshoot control issues through phone and email, remotely.
• Able to coordinate with Site Engineers and Superintendents on site commissioning.
• To handle factory internal testing in workshop.
• To handle Factory Acceptance Test in workshop in the presence of customer.
• Provide technical assistance to Sales Engineers.
• Coordinate with customer for technical issues to meet customer's technical requirements.
• Able to support and troubleshoot programming issues throught remote internet/computer device.
• Monitor projects through completion, providing corrections, modifications or assistance to other department as needed.

Qualifications & Requirements

• Degree in Electrical or Engineering equivalent.
• Minimum 5 years of design experience in either power generation controls and/or electrical switchgear or automation control.
• Proven experience with low-voltage and medium-voltage switchgear design, control panel development, and power system studies.
• Proficiency in AutoCAD, E3, or other CAD tools.
• Demonstrate above-average electrical engineering skills, preferably within the power generation industry or closely related field.
• Ability to manage multiple projects simultaneously, meet deadlines, and coordinate across teams.
• Generator control knowledge is a plus.
• Strong written and verbal communication skills for creating documentation and liaising with cross-functional teams and clients.
• Excellent analytical and troubleshooting abilities to resolve complex electrical design challenges.
• Experience in PLC and HMI (touchscreen and/or IPC) programming.
• Knowledge in network communication and SCADA is a plus.
• Ability to read and interpret electrical schematics, plans, drawings, prints or similar job write-up.
• Willing to travel overseas as frequent global site visits is expected.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Job Description:

• Responsible for maintaining, troubleshooting, and repairing all plant machinery.
• Perform regular check on mechanical equipment to keep equipment functioning at optimal efficiency.
• Insured the continuous implementation of a preventive maintenance program to control maintenance cost and improve equipment performance.
• Work closely with section manager in detailed planning, design and implementation of the mechanical system upgrade.
• Train technician teams in performing maintenance work according to protocols.
• Document Maintenance and Repairs in Daily Log.
• Perform other duties as assigned..

Job Requirement:

• Good interpersonal and communication skill
• Strong hands on maintenance and troubleshooting skill
• With related experience in process plant environment preferred
• Able to work independently and with a team to completion of tasks

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

We are looking for an Asst Engineer / Engineer to be part of one or more teams in supporting and maintaining systems, keep them up and running smoothly 24/7. The Asst Engineer / Engineer should have broad technical skills and a working background in the System-Level Maintenance in the following disciplines, Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS.

Responsibilities:

• Involve in one or more teams in supporting and maintaining systems, keep them up and running smoothly
• Report to the Team Lead/Service Delivery Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement.
• Assist Team Lead/Service Delivery Manager to deliver contract obligation within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.
• Liaison with procurement and equipment vendors.
• Perform 24/7 off-site standby for fault activation after office hours.
• Arrange and attend monthly meeting with customers.
• Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management.
• Provide solutions to technical problem associate with RF communication systems.
• Required to travel to sites for work

Requirements

• Minimum of Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns)
• Preferably with experience in System-Level Maintenance in the following disciplines is highly preferred (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in written, verbal and interpersonal skills
• Proficient in MS Office (Words, Power-point & Excel)

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing (Shipbuilding)
• Position Title: Mechanical Service Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Mon – Fri, 8.30 AM – 5.30 PM)
• Salary Package: Basic salary up to $3,200 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Assist in the design, analysis, and troubleshooting of mechanical systems and components for marine applications.
• Collaborate with cross-functional teams on the installation and commissioning of mechanical equipment and systems on vessels and offshore structures.
• Perform regular inspections and maintenance to ensure mechanical systems function properly and adhere to safety standards.
• Work alongside senior engineers to enhance mechanical systems for optimal performance and efficiency.
• Contribute to the creation of project specifications, documentation, and technical reports.

APPLY NOW!!!

• Diploma or Degree in Mechanical Engineering or related field
• Effective communication and teamwork abilities
• Able to work on vessel
• Candidates without experience are welcome to apply. Training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66153 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Additional Information:

• Mon to Fri (8am to 5pm)
• Transport provided from Jurong East MRT
• Chemical Manufacturing Plant
• New headcount for expansion

Responsibilities:

• Generate spare parts list for the equipment, reliability for critical spares, work with IT department to transfer the list into BOM list, ensure physical and SAP system count are tally.
• Drive and lead the spare parts management process with contractor resources.
• Knowledge of SAP for scheduling maintenance work activities.
• Work with stakeholders to ensure the work task to be planned, scheduled and performed.
• Coordinate and engage operations to ensure all job requests are clear & concise and maintenance work orders are prioritized.
• Carry out site checks & planning of work orders end to end process, maintenance activities into tasks with resources, parts/material, craft/manpower and sequences for optimal work execution.
• Planning of work orders issue to the relevant engineers/contractors for execution.
• Compliant with EHS standards and accountable for all assigned activities.
• Support the project in pre and commissioning activities such as verifying site check and witness commissioning activities.
• Responsible for material procurement and availability prior to execution of all maintenance works.
• Create and maintain EHS, corrective maintenance activities.
• Actively monitor the actual work execution in terms of cost, resource, schedule and update the equipment plans accordingly.
• Accountable for ensuring that preventive/corrective maintenance compliance and timely closure of work orders.
• Initiate EHS plans/job safety analysis for the planned work orders to ensure safe execution of work.
• Ensure maintenance plans are scheduled accordingly and executed before their due dates.
• Accountable to ensure no overdue of all prevention/correction work including the necessary materials procure and availability.
• Assist in budget planning based on past years cost trending and provide inputs to improve contract strategy.
• Contribute and participate actively in site reliability improvements.
• Use Computerized Maintenance Management System in compliance with the global maintenance and business processes.

Requirements:

• Degree/Diploma or equivalent preferably in Mechanical Engineering.
• At least 5-10 years relevant field experience as Plant Engineer preferably with Mechanical Engineering background.
• Experienced in chemical process plant preferred.
• Prior relevant knowledge in EHS, Risk Management, Plant Operations, Reliability, Process Technology, MOC Management, Budgeting and RCA
• Strong communication and written skills
• Prior work experience using SAP system is preferred.

Interested applicant, please submit your application now!

We regret that only shortlisted candidates will be notified.

EA License No.: 23C1461

EA Reg. No.: R24120207 (Soh Yan Cheng Andrew)

By submitting your personal information and/or resume, you are deemed to consent to CareerVisors Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Well Established Company
• Basic $3000 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

[Order Number: 707232-R]

Responsibilities

• Act as the main point of contact between customers and internal teams, ensuring effective communication and timely resolution of technical and maintenance issues.
• Provide hands-on troubleshooting and maintenance for power plant systems, including root cause analysis and resolution of operational and mechanical issues.
• Plan and oversee scheduled and unscheduled maintenance activities, coordinating with customers, technical advisors, and vendors to ensure efficient execution.
• Monitor and report key performance metrics, including reliability, availability, and maintainability (RAM), and present findings and recommendations to customers.
• Identify and mitigate operational risks, support system improvements, and collaborate with remote monitoring hubs and technical support teams to enhance system reliability.

Requirements

• More than 3 years of experience as a Mechanical Maintenance Engineer in the petrochemical or chemical industry.
• Previous site work experience in Long-Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or rotating equipment in industrial plants is preferred.
• Strong troubleshooting skills, with expertise in mechanical systems and components, instrumentation, controls, and plant operational aspects.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working day: Monday to Friday
• Working house: 8am to 5pm

Job Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day-to-day activities
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors
• To manage all Mechanical & electrical Instruments spare parts and tools

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Min 2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg