Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Perform thorough system maintenance.
• Supervise sites and assist hands-on when necessary.
• Troubleshoot and resolve issues as they arise.
• Communicate and oversee contractors on safety and work tasks.
• Execute tasks assigned by the Engineer or Shift Engineer.
• Complete reports for completed tasks.

Requirements:

• Diploma/Higher Nitec in Mechatronics, Electrical or Electronics
• Experience in electrical and electronic works.
• Experience in basic Microsoft office.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Understand basic Window system.
• Willing to work at height on outdoor public road
• Must have Singapore Class 3 Driving License (Unable to consider Class 3A)

Additional info:

• 2 years direct contract, renewable

To apply, please visit www.gmprecruit.com and search for Job Reference: 24824

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Licensed Aircraft Engineer B1/B2

• Perform/Certify aircraft maintenance tasks
• Attend to aircraft routine transit/daily/weekly/monthly checks and other line maintenance duties
• Inspect, troubleshoot, and repair aircraft and/or engines and all associated aircraft systems
• Inspect finished work, operation/functional tests and aircraft defect rectification
• Sign-off all tasks performed and comply with Airworthy Release
• Manage and maintain tool & equipment store and provide recommendations, if applicable
• 70% Base, 30% Line, depending on workload

Requirements:

• Prefer EASA, FAA or related licence

• Wide body aircraft rating preferred

• At least 5 years of B1 or B2 Engineer experience

Permanent, Thomson road, 5.5 days

• · Oversee maintenance and operations for mechanical and electrical (M&E) systems in building facilities.
• · Supervise internal team members and external contractors.
• · Collaborate with the facilities team, contractors, and clients to resolve technical issues.
• · Attend M&E-related meetings and prepare reports.
• · Assist in planning, coordinating, and controlling M&E works.
• · Schedule, monitor, and supervise work progress.
• Handle client inquiries.

Requirements:

1. Diploma in Engineering, Building, Real Estate, Facilities Management, or related fields.
2. 3 years of experience in facilities maintenance operations
3. 5.5-day work week.

Work location :Thomson Road

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment.

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position.

We regret that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Reporting to the Manager in the Engineering Department, the selected incumbent shall assist the Engineering team in the following tasks:

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.

Note:

Candidate MUST BE willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Roles & Responsibilities

· Assist Maintenance Engineer in overseeing all maintenance and works

· Attend to complaints call of equipment breakdown from clients

· Supervise sub-contractors and service contractors at site

· Perform any other duties assigned by the Maintenance Engineer

· Maintain and follow up on Service Contracts, Service Reports and Checklist

· Plan, schedule and manage the project efficiently and to ensure timely completion

Qualifications / Requirements

· At least Nitec in Engineering

· 2-3yrs of working experience in air-conditioning and related M&E systems

· Self-motivated and a good team player

We are seeking a highly skilled and motivated Hotel Maintenance Technician to join our team and ensure the smooth functioning of our hotel properties. You will play a crucial role in maintaining the hotel's facilities to the highest standards and ensuring the safety and comfort of our guests and staff.

Job Description

Perform repairs & general maintenance work on various systems, including (but not limited to) M&E, plumbing & sanitary, air-conditioning, electrical/lighting, painting, and carpentry.

Troubleshoot issues and implement effective solutions.

Ensure compliance with building and fire safety regulations.

Follow established maintenance strategies and company policies for a safe environment.

Coordinate with other departments for smooth operations.

Communicate effectively with supervisors and colleagues regarding maintenance statu and issues.

Qualifications and Skills:

1 to 2 years of relevant working experiences in facilities & building maintenance.

ITE NITEC / Higher NITEC / GCE 'N' / 'O' Level / Diploma

Preferably to have hospitality background

A team player and the ability to work during weekends and on public holidays.

Job Description:

• Attend to all the maintenance & repair job required and ensure successful completion.
• Perform preventive maintenance in all production machines.
• Report and identify any defect or faults found during preventive maintenance.
• Perform routine maintenance, troubleshooting, and repairs on stamping presses, feeders, conveyors, and other related equipment.
• Inspect mechanical, hydraulic, pneumatic, and electrical systems to identify wear, damage, or potential failures.
• Develop and adhere to preventive maintenance schedules to minimize downtime and maintain equipment reliability.
• Conduct periodic inspections and adjustments to ensure machinery operates at peak performance.
• Use diagnostic tools, schematics, and blueprints to identify and resolve equipment malfunctions.
• Collaborate with engineering teams to implement effective solutions for recurring issues.
• Ensure proper operation of safety devices, sensors, and automation systems.
• Maintain detailed maintenance logs, repair records, and inventory of spare parts.
• Report significant issues, root cause analyses, and resolutions to supervisors or engineering teams.
• Ensure compliance with workplace safety regulations and company policies.
• Conduct regular inspections to verify equipment meets safety and quality standards.
• Suggest and implement process improvements to enhance equipment efficiency and reduce downtime.
• Participate in training programs to stay updated on new technologies and techniques in the industry.
• Any other duties as assigned by superior and/or management.

Requirements:

• Minimum NTC 3 in Mechanical/Electrical Fitting.
• Certification in maintenance and reliability (e.g., CMRP) is advantageous.
• 2–5 years of experience in maintenance within a stamping or manufacturing environment is highly desirable.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Job Description

• Industry/ Organization Type: High Speed Networking Service Provider
• Position Title: Field Service Technician/ Engineer
• Working Location: Ubi (Nearest MRT: Tai Seng) – Company transportation provided to travel to client location
• Working Hours: Monday to Friday, 9.00 am – 6.00 pm
• Salary Package: Up to $3000 + OT (Dependent on project) + Performance Bonus
• Duration: Permanent

Key Responsibilities

Field Service Engineer

• Work as part of a team to install, test, and commission company equipment, ensuring all systems are fully operational and meet client expectations.
• Assist with the setup and configuration of network-based systems, ensuring connectivity and functionality.
• Set up and configure security surveillance systems and access control systems, ensuring proper functionality and client satisfaction.
• Install and maintain radio communication equipment, ensuring uninterrupted communication services.
• Regularly service and maintain installed equipment to ensure optimal performance, including troubleshooting and repairs when necessary.
• Assist in project planning, coordination, and execution, ensuring timely completion of assignments.
• Participate in on-the-job training under senior engineers, developing your technical skills and expanding your field of expertise.

Field Service Technician

• Perform accurate installation and laying of electrical cables to ensure proper connectivity, adhering to industry standards and safety protocols.
• Assist in the testing and commissioning of electrical systems, ensuring that all equipment is safely operational and meets performance standards.
• Conduct routine general maintenance on installed electrical systems and equipment to maintain optimal functionality and reduce downtime.
• Diagnose and fix electrical faults and malfunctions, ensuring that issues are resolved promptly to minimize disruptions.
• Follow all safety regulations and protocols to ensure a safe working environment, including the proper use of personal protective equipment (PPE).
• Work closely with other technicians and engineers to complete tasks efficiently and effectively, ensuring all project goals are met on time.
• Training & Development: Participate in ongoing training programs to stay updated on the latest industry trends, electrical techniques, and safety standards.

APPLY NOW!!!

• Min. NITEC in Electronic or Electrical
• 1 year’s experience working with security surveillance systems, access control, or radio communication equipment preferred
• Training provided for those without experience
• Class 3 driver’s license preferred

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

The Job Responsibilities:

- Responsible for performing outdoor & indoor repair, maintenance and troubleshooting work

- Where there is no outdoor repair, you are required to work within the Company workshop

What It Takes:

· Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, single-phase & three-phase, lead acid & lithium batteries, electrical control circuits, hydraulic system)

· minimum a year of customer support experience

· ability to work as part of a team and possess strong communication skills

· obtained local driving license is a plus

Job Description

• Industry/ Organization Type: Marine Spare Parts & Machinery Supplier
• Position Title: Marine Service Engineer
• Working Location: West – Gul Circle
• Working Hours: 5.5 days (Mon-Fri: 8 am-6 pm, every Sat: 8 am-1 pm)
• Salary Package: Up to SGD 5000 + Bonus + On-site allowance
• Duration: Permanent

Key Responsibilities

• In-charge of repair / service sales division
• Main Engine & aux engine repair, pumps, compressors, purifier and hydraulic at shipyard, working anchorage, OPL, follow voyage, PSA & Jurong port (ship owner, ship manager / Shipyard – DDW Pax ocean, ST Marine, Keppel / Industry – sewage treatment, Jurong & Kranji / Spares & equipment supplier / Engineer solution)
• Prepare & submit repair /service quotation to customer
• Get quotation from repairer
• Co-ordinate and arrange internal and external service team
• Co-ordinate between customer, agent & vessel for dispatching our teams to go onboard vessel to carry out repair/servicing job and or pre-work inspection
• Follow up with customer on status of our offer
• Co-ordinate with repairer & customer for any claims, dispute or complaint on work done or supply
• Prepare & submit inspection / service report to customer in accordance with ISO requirement & standard, filing of report is part of the job scope as per requirement
• Update & submit, sales report - quotation, enquiry against actual sale statistic report by weekly, monthly & yearly
• Co-ordinate between the sales team & production / service team for reconditioning work of stock item
• Coard vessel to meet Capt / Chief engineer for service & spares sales call & inspection in due course
• Carry out risk assessment for each service and observe safe work practice and regulations onboard vessels & in the workshop is part of the job responsibilities

APPLY NOW!!!

• Min. ITE in Marine or Mechanical Engineering
• Min. 3 years of working experience in the Marine industry
• Must have Hands-on experience on 2 & 4 stroke engines, purifiers, pumps, and air compressors
• Those with sailing experience are welcome

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66039 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Info:

• Monday – Friday, 8.30am – 5.30pm
• Basic + Mobile Allowance + Standby Allowance + AWS + VB
  Transport claim: $800/month on mileage claim
• Annual leave 12 days
• Location: Toh Guan, West Region

Key Responsibilities:

• Address equipment faults at customer locations.
• Coordinate with customers and subcontractors for project tasks.
• Supervise work progress to uphold schedule and quality benchmarks.
• Ensure prompt delivery of materials and equipment for site installations or fault repairs.
• Perform routine maintenance for clients.

Requirements:

• Diploma in Electronics and Electrical Engineering
• Hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc
• Standby duty is required
• Possess a valid class 3 driving license

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Chan He Guang | EA Personnel No.: R23117560

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Serve as the main point of contact for the maintenance project.
• Coordinate maintenance requests, receive instructions, and attend meetings.
• Ensure all works comply with the approved works program and methodology.
• Manage relationships with clients, contractors, and suppliers.
• Prepare and submit reports, quotes, and other required documents.
• Review and accept deliverables.
• Supervise the Maintenance Team.
• Arrange major contracts for services performed by sub-contractors.
• Establish service agreements, including leases and insurance for vehicles and policies related to maintenance work.
• Conduct regular reviews of the Maintenance Plan with the Project Manager.
• Submit monthly maintenance reports and attend all maintenance meetings.
• Plan and schedule routine preventive maintenance.
• Review the performance of routine preventive and corrective maintenance with Team Leads.
• Conduct regular reviews of Standard Maintenance Procedures.

Requirements:

• Relevant engineering/technical degree or diploma from a recognized university or tertiary institution.
• Must at least have 5 years of relevant working experience in the maintenance of IT or electronic systems.
• PMP certification required for diploma holders.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

Responsibilities:

• Install, service, and repair equipment onboard vessels
• Load and update software and use technical knowledge to address a variety of technical problems.
• Use the company’s schematics, block diagrams, and manuals to diagnose the fault and recommend relevant spare parts to be changed.
• Work closely with senior engineers as a start but will require to be independent after training
• Upon completion of the service job, write a service report for submission to the ship management or ship owners.

Requirements:

• Min Diploma requirement In Engineering related,
• Min. 1-year working experience
• Positive can-do attitude
• Willing to work overtime
• Experience in MS Office
• Team Player

Queenie Chua

R24125459

Job Description

• Industry/ Organization Type: Marine Spare Parts & Machinery Supplier
• Position Title: Marine Service Engineer
• Working Location: West – Gul Circle
• Working Hours: 5.5 days (Mon-Fri: 8 am-6 pm, every Sat: 8 am-1 pm)
• Salary Package: Up to SGD 5000 + Bonus + On-site allowance
• Duration: Permanent

Key Responsibilities

• In-charge of repair / service sales division
• Main Engine & aux engine repair, pumps, compressors, purifier and hydraulic at shipyard, working anchorage, OPL, follow voyage, PSA & Jurong port (ship owner, ship manager / Shipyard – DDW Pax ocean, ST Marine, Keppel / Industry – sewage treatment, Jurong & Kranji / Spares & equipment supplier / Engineer solution)
• Prepare & submit repair /service quotation to customer
• Get quotation from repairer
• Co-ordinate and arrange internal and external service team
• Co-ordinate between customer, agent & vessel for dispatching our teams to go onboard vessel to carry out repair/servicing job and or pre-work inspection
• Follow up with customer on status of our offer
• Co-ordinate with repairer & customer for any claims, dispute or complaint on work done or supply
• Prepare & submit inspection / service report to customer in accordance with ISO requirement & standard, filing of report is part of the job scope as per requirement
• Update & submit, sales report - quotation, enquiry against actual sale statistic report by weekly, monthly & yearly
• Co-ordinate between the sales team & production / service team for reconditioning work of stock item
• Coard vessel to meet Capt / Chief engineer for service & spares sales call & inspection in due course
• Carry out risk assessment for each service and observe safe work practice and regulations onboard vessels & in the workshop is part of the job responsibilities

APPLY NOW!!!

• Min. ITE in Marine or Mechanical Engineering
• Min. 3 years of working experience in the Marine industry
• Must have Hands-on experience on 2 & 4 stroke engines, purifiers, pumps, and air compressors
• Those with sailing experience are welcome

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66039 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

• Visit clients’ sites to perform servicing and maintenance on microscopes
• Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820