Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Repairs, preventive maintenance and trouble shooting of precast automatic production machines and overhead cranes
• Able to interpret electrical circuit and mechanical drawings including pneumatic and hydraulics system
• Sound knowledge in PLC, inverter drives and direct-on-line controls
• Able to oversee maintenance team

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 1 year experience in maintenance of mechanical equipment
• 2-3 years experience in production machinery and industrial equipment
• Possess good written & spoken communication in English
• Able to work independently
• Working location : Tuas South

• Prepare and give technical presentations to explain to customers how the products and services work.
• Work with the customers and Engineers to ensure the equipment meets the system requirements.
• Communicate with the sales team to understand consumer demands and offer sales support where necessary.
• Secure orders, guarantee product standards and assure product delivery.
• Establish customer rapport and acceptance.
• Plan for modifications to products to meet consumer demands.
• Help clients to solve problems with product usage.
• Recommend new and improved products to the customers and explain how the equipment will be more cost-effective.

Responsibilities:

• Repairs, preventive maintenance and trouble shooting of precast automatic production machines and overhead cranes
• Able to interpret electrical circuit and mechanical drawings including pneumatic and hydraulics system
• Sound knowledge in PLC, inverter drives and direct-on-line controls
• Able to oversee maintenance team

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 1 year experience in maintenance of mechanical equipment
• 2-3 years experience in production machinery and industrial equipment
• Possess good written & spoken communication in English
• Able to work independently
• Working location : Tuas South

Responsibilities:

• Manage and monitor systems and infrastructure
• Install, configure, test, and maintain OS, software, and system tools.
• Ensure system availability and performance optimization.
• Monitor application performance, identify bottlenecks, and implement fixes.
• Maintain security, backup, redundancy, and BCP strategies.
• Participate in the design of operational support systems .
• Collaborate with vendors and IT teams for issue resolution.
• Manage VMware environment and support cloud Microsoft Azure & RedHat Linux
• Provide support for HPE and Hitachi environments.
• Provide 24/7 support, including on-call rotation (1 week/month).

Requirements:

• Diploma/bachelor’s in computer science or equivalent.
• 5+ years’ experience with VMware vCenter, security technologies, system monitoring, backup & recovery.
• Knowledge of Windows Server OS, AD, DNS, GPO, Clustering, and SAN storage (Hitachi Virtual Storage Platform is a plus) .

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440

Responsibilities:

• Developing and optimizing processes, including production flow, assembly methods, and equipment
• Ensuring efficient and profitable manufacturing processes
• Carrying out risk assessments of all equipment and processes
• Writing reports based on data collected and presenting findings to higher-ups
• Coordinating manufacturing launch of new or revised products
• Help with change control, test script writing

Requirements:

• Min Degree in related study
• 1-2years experience in Pharma engineering

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Job Description:

• Oversee post-sales activities Cybersecurity products.
• Participate in large-scale project implementations at both local and regional levels.
• Provide on-site implementation services, including testing, deployment, and documentation.
• Offer technical support to ensure customer satisfaction.
• Analyze and address customer queries by troubleshooting and consulting existing knowledgebase articles and known issues.
• Be available for 24x7 maintenance support calls on a routine standby basis.
• Any other ad hoc duties as assigned by supervisor.

Requirements:

• Candidates with no prior relevant experience are also encouraged to apply
• Bachelor’s Degree or Diploma in Cyber Security, Computer Science, Computer Engineering, or a related field.
• 1-3 years of relevant experience in IT, particularly in network support and administration.
• Knowledge and experience in networking, including routing and switching technologies.
• Capable of working independently as well as part of a team.
• Willing to work diligently and eager to learn about new technologies.
• Strong analytical and troubleshooting abilities.

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

As a Metrology/ Real-Time Defect Analysis (RDA) Engineer in MSB, you have the opportunity to work with a multi-functional team from different areas of the plant/ process areas to understand their tools and processes so as to create measurement recipes that can provide quick and accurate feedback on the product integrity, thus ensuring quality output. As technology advances, you will be constantly challenged with the need to innovate for newer, faster and better modes of monitoring. You will collaborate closely with vendors to explore best known methods to maintain high tool performance and embark on possible ways of cost reduction to ensure our product retains its competitiveness in the market. Additionally, you are required to work in both clean/non-clean room environment

Enable production Metro/RDA needs.

• Provide first level of support for engineering requests, recipe maintenance, tool recovery and basic troubleshooting of tool issues
• Set daily priorities and enable efficient communication.
• Schedule and perform preventive maintenance on assigned tool sets
• Ensure all Special Work Requests (SWRs) are processed correctly and in a timely manner
• Optimize tool maintenance schedules and utilization
• Resolve sampling strategy to meet business requirement

Ensure all Metro/RDA tool meet measurement and inspection standards.

• Set up tool qualification criteria, implement, supervising through SPC.
• Make decisions on how to address tools and products that are out of control for established SPC rules for both process and defect related issues
• Develop and handle projects designed to reduce cost, reduce tool measurement variability, improve availability, and find solutions to ongoing problems
• Partner with Process, Equipment Owners and vendors for equipment upgrades/enhancements to improve tool performance
• Perform periodic assessment, tool-to-tool matching and GR&R, etc. to ensure tool measurement accuracy.
• Evaluation and enable next generation tool to close metrology gaps.
• Partner with the metrology/inspection tool vendors to develop new hardware, software, and technologies.
• Perform tool evaluation and buy-off

Seek and drive methodology breakthrough to improve efficiency in metro/RDA function.

• Drive process improvement through new recipe creation that helps to provide accurate and faster feedback to the line, thereby improving the confidence level of the product.
• Participate in world-wide discussions for continuous improvement on the toolset(s) assigned across Micron sites.
• Set up processes, design and implement process monitoring, control methodologies.
• Establish business process standards, specifications and documents.
• Work with peer groups to test and vet new or continuously improve the Reaction Mechanisms and Procedures based on feedback from the end users.
• Write and publish reports that summarize projects, detection capability improvements, manufacturing productivity and cost reduction work.

Requirements:

• Bachelors in engineering/science/Statistics
• More than 2 years’ experience in Metrology/RDA in Semiconductor industry
• Knowledge of semiconductor Metrology/RDA equipment and understanding of Statistical Process Control (SPC), process control and its reaction mechanism
• Strong problem solving and critical thinking skills and able to identify root causes
• Ability to facilitate meetings and achieve cross area engagement /empower a group of people toward a common goal / work and lead team project.
• Good documentation skills with strong attention to details
• Validated strong analytical and data summary skills
• Experience in MSA (Measurement System Analysis) is an added advantage
• Experience in Python and Tableau is an added advantage
• Good communication skills

Keen on the role? Apply now!

Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Execution of Contracts & Installation progress
• Liaise with Client/Consultant/contractors to ensure efficient and timely delivery of assignment.
• Report and monitor of progress of project to Project Manager.
• Supervise works are in accordance to the contract drawings and specifications.
• Prepare method statement, shop drawings, installations / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.
• Coordinate with subcontractors and consultants on preparation and submission of shop drawings.
• Coordinate / prepare technical submissions with suppliers / subcontractors.
• Assist negotiate on procure materials, equipment and labour in accordance to budget.
• Meeting with various stakeholders to resolve technical / site issues.
• Work with stakeholders on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

Requirements:

• Diploma/Degree in Electrical / Mechanical Engineering or equivalent.
• Minimum 3 years’ experience in construction industry.
• Experience in working at Data Center or in DFMA.
• Familiar with VAV / VRV / cooling tower / Chillers / chilled water pipe / A&A works.
• Familiar with retrofit / renovation / lighting control / BMS.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

As a Central PIE Yield Engineer / Senior Engineer / Principal Engineer at Micron Technology, Inc., you will be responsible for providing leadership to the global Micron network to drive yield, product quality improvement, new product introduction (NPI) through technical expertise, business process management and project execution.

This role needs to centralize the project information, including achievements, design requirements and testing difficulties from multiple departments located in Japan, Taiwan, Singapore, US; and drive the project to meet specs within defined tight schedule.

Responsibilities and Tasks

• Promote worldwide alignment for improved benchmark performance and efficiency gains through global project management and execution, network BKM leveraging and enhancement, and business process creation and re-engineering.
• Drives yield breakthroughs by understanding the comprehensive test flow across steps, testing conditions, product design/operation and propose an effective solution for yield versus reliability requirements.
• Foster innovation to solve yield issues with the help of generating ideas from characterizing the device fail-modes using the deeper expertise in device architecture, physics, and available testing knobs.
• Lead a multi-functional team to build frontiers in the areas of yield improvement by demonstrating the knowledge of test flow, device, bench characterization, fab process and technologies.
• Strong collaboration with Product, Test, Quality and Fab Engineering to develop best in class process, BKMs and work towards alignment across fabs, tech-nodes and technologies to achieve benchmark yield performance.
• Maintain and improve knowledge and technical expertise, explore innovation opportunities with critical thinking and detailed approach.
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Fab, Technology and Development, Product, Test and Quality Engineering.
• Communicate and respond to issues in a timely manner.
• Demonstrate ability to give effective presentations to both small and large groups on project updates and new initiative proposals.
• Periodically follow up with manager to ensure all type of goals are met and get assistance to remove obstacles.
• Travel to Micron Fab locations as necessary for face-to-face work.

Requirements

• Bachelor’s / Masters / PhD in Electrical Engineering, Microelectronics, Physics, or related field of study.
• Knowledge in Semiconductor Device Physics, DRAM/NAND/Logic product operations, parametric/electrical test, and probe yield.
• Experience in Product, Test, Yield, Design Engineering will be added advantage.
• Experience on DRAM High Bandwidth Memory will be a plus to this job position.
• Good data analysis, debugging, problem solving, reporting and presentation skills.
• Good multi-tasking, verbal, and written communication skills.
• Strong interpersonal skills and customer/co-worker relationships. Validated teamwork skills with a strong focus on developing good team dynamics.
• Good organizational capabilities and ability to work effectively with minimal direction.
• Intermediate to advanced PC skills including Microsoft Office.
• Ability to be flexible with job responsibilities and take the initiative to assume added responsibilities.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

• Well Established Company
• Basic $3000 - $4500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working hours : Normal working hours
• Training provided for those without/lesser experience

Job Responsibilities:

• Manage project and site activities, attend project meeting
• Perform equipment set up, start-up and commissioning
• Project implementation to ensure the successful and smooth delivery of systems/projects through effective planning, management, and deployment of resources
• Provide technical support and troubleshoot equipment faults after project handover
• Familiar with Singapore safety regulations and process. Prepare and submit project safety documents
• Manage project-related submission and paperwork by ensuring all necessary materials are current, properly filed and stored
• Works closely with the Project Team, Manufacturers and Vendors to deliver Customer’s expectation within timeline
• Involves in technical specifications review of the project scope
• Provide operational and maintenance training to customers
• Any ad hoc duties as assigned

Job Requirements:

• Minimum ITE/Diploma/Degree in Mechanical Engineering or its equivalent
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Summary:

• Basic up to 6k
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Title: Sales Engineer (ID5039)
Location: Tuas
Working Hours: Mon to Fri, 8.30am to 6pm
Salary: $3400 to $4800

Job Description:
• Generating new customers base & maintaining relationship with existing customers
• Proactively identifying new business opportunities, developing, negotiating and closing commercial deals with customers
• Perform costing and submit quotation to customers which may include negotiating on tender, contract terms and sourcing for raw materials
• Providing the technical solution required to address client requirements
• Prepare sales order and necessary manufacturing documents
• Work closely with project management team in managing the project progress
• Participate in marketing efforts by the sales team through coordinating or attending trade shows and conferences
• Liaising with other members of the sales team, engineers and other technical experts

Requirement:
• Interested in sales
• Prior experience in the welding / oil & gas industry preferred
• Good interpersonal, communication
• Ability to read technical drawings
• Good in mathematics
• Strong desire and ability to learn quickly and acquire new skills
• Comfortable working independently

ob Description

• Industry/ Organization Type: Cleaning Service
• Position Title: Restroom Cleaner
• Working Location: Aljunied (Near MRT Station)
• Working Hours: 6 days (36 hrs/week)
• Salary Package: $1,800 + BONUS + INCREMENT
• Duration: Part time
• Mon to Fri: 11am to 4pm (1 hr break)
• Sat to Sun: 9 am to 6pm
• Off day once every week to be discussed with interviewer

Key Responsibilities

• Perform general toilet cleaning duties
• Wash and clean restroom for every level by schedule
• Empty trash bins
• Monitor and touch up restroom when needed
• Adhere to a regular cleaning schedule as outlined by the supervisor.
• Cooperate with other staff members and perform additional tasks as assigned.

APPLY NOW!!

• Proven experience as a cleaner or similar role.
• Knowledge of cleaning chemicals and supplies.
• Good physical stamina and positive attitude
• Singaporean / PRs / LTVP
• Join in bonus!

Key Responsibilities

1. Assist on all project administrative matters.
2. In-charge of project tracker and update master record.
3. Liaise with client on claim, invoicing and payment issues.
4. Assist & support on purchasing.
5. Generate business reports on a monthly basis.
6. Support on daily site safety matters and risk assessment control.
7. Manage social media accounts and marketing / PR matters.
8. Other ad hoc duties.

Requirements:

• 1-2 years’ experience in an administrative

• Fast learner and able to multi-task

• Positive working attitude and willing to learn

• Proficient in using Microsoft Office

• Able to work independently

• Ability to maintain confidentiality.

We are seeking a highly skilled and motivated Hotel Maintenance Technician to join our team and ensure the smooth functioning of our hotel properties. You will play a crucial role in maintaining the hotel's facilities to the highest standards and ensuring the safety and comfort of our guests and staff.

Job Description

Perform repairs & general maintenance work on various systems, including (but not limited to) M&E, plumbing & sanitary, air-conditioning, electrical/lighting, painting, and carpentry.

Troubleshoot issues and implement effective solutions.

Ensure compliance with building and fire safety regulations.

Follow established maintenance strategies and company policies for a safe environment.

Coordinate with other departments for smooth operations.

Communicate effectively with supervisors and colleagues regarding maintenance statu and issues.

Qualifications and Skills:

1 to 2 years of relevant working experiences in facilities & building maintenance.

ITE NITEC / Higher NITEC / GCE 'N' / 'O' Level / Diploma

Preferably to have hospitality background

A team player and the ability to work during weekends and on public holidays.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

ob Description

• Industry/ Organization Type: Cleaning Service
• Position Title: Cleaner
• Working Location: Waterloo Street (Near MRT Station)
• Working Hours: 6 days (48 hrs/week)
• Salary Package: $2,250 + OT + CONFIRMATION INCREMENT + SIGN UP BONUS
• Duration: Permanent

Key Responsibilities

• Perform general cleaning duties as scheduled
• Clean and sanitize office space, synagogue, prayer room, common areas, corridor, lift, toilets and other designated spaces.
• Perform ad-hoc cleaning or touch up when needed.
• Monitor and replenish cleaning supplies as necessary.
• Adhere to a regular cleaning schedule as outlined by the supervisor.
• Cooperate with other staff members and perform additional tasks as assigned.

APPLY NOW!!

• Proven experience as a cleaner or similar role.
• Knowledge of cleaning chemicals and supplies.
• Good physical stamina and positive attitude
• Hardwoking and task oriented
• Singaporean / PRs / LTVP

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

As a Package Development Engineering Key Equipment Group (PDE KEG) engineer, you will be primarily responsible for identifying, selecting, evaluating new equipment (highly automated and computerized) / new technology to support current and future requirement for advantage packaging technology. You will also be responsible for installation and qualification of new equipment platform and handover to production group (Equipment Maturity Index, EMI). In addition, tasks include maintaining a matrix of key equipment platform capability and constraints (Tool of Records, TOR) on current and new equipment platform, collaborating with production group on upgrades of existing production equipment through continuous improvement projects

JOB RESPONSIBILITIES:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines

As an Manufacturing Central Team Assembly and Test Automation Project Engineer Automation Project Engineer, you are member of the Global Operations Team responsible for the worldwide portfolio of Automation projects aligned to Assembly and Test Operations objectives and corporate strategies and initiatives. You will develop, facilitate, and/or lead data-driven program management capabilities during Initiation, planning, and execution phases. You will identify risks early, manage issues, and drive initiatives to closure.

Job Responsibilities

• Collaborate with network teams - site automation, central/ site Process and Equipment Engineering, procurement, safety EHS in managing the automation projects
• Identify Project partners and manage expectations
• Identify and manage program projects dependencies
• Collect and document partner requirements
• Identify and resolve issues and conflicts
• Control project scope
• Communicate project expectations to team members and partners
• Coach, mentor, motivate, supervise, and provide recognition for projects
• Maintain project support through interaction with senior leaders
• Promote Program Management value and business practices to the organization
• Develop and deliver progress reports, proposals, requirements documentation, and presentations
• Identify potential crises, and develop and implement resolution plans
• Facilitate transition of system and business processes from project closure to long term sustainment
• Follows Company/Department Policies and Group expectations.
• Maintains a clean and safe working environment by proactively assessing the work (and surrounding) area and submitting work orders as needed.
• Recognizes and reacts to safety alarms (EES, fire alarm, MDA, etc.)
  Remains within Micron’s attendance policy.
• Displays a positive attitude toward Micron and its policies
  Holds self and other team members accountable for adherence to all company-wide safety procedures (PPE, EIPS).
• Observe all established EHS policies, requirements, and procedures.
• Understand and follow EHS guidelines included in work instructions.

Requirements:

- Bachelor's in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.

- Minimum 3 years working experience in engineering semiconductor project management field

- Strong verbal and written communication skills

- Capability to lead teams and manage project team members

- Project Management Certifications are preferred

- Knowledge in automation, semiconductor process and systems are beneficial

- Experiences in supporting and leading global teams/projects