1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Responsible for taking orders and serving food and beverages to guests
• Polite friendly and well grown
• Verifying the identification and of any customers who order alcoholic beverages
• Submit food orders to the kitchen staffs
• Ensure customers satisfied with their meal
• work with kitchen staffs to resolve any complaints and process customer payments

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities:

• Offer a professional, friendly greeting and engaging service
• Assist in monitoring the guests’ needs, check and coordinate special requests such as special menu requirements, cake or flower orders, tables’ requests, and promotional offers
• Allocate and check the table arrangement both prior and during service, ensuring special requests are met wherever possible
• Check on guests’ satisfaction, attend guests’ needs and comments with proper follow up with Manager
• Any other ad-hoc duties as assigned by the Company

Requirements:

• Able to work on split shifts, weekends, and public holidays
• PC literate, well-organized, and self-motivated
• Possess good communication and interpersonal skills

Whatsapp 91834574 for more information

You will be part of the team responsible for the operational support of Authority's Service Desk and expected to work independently. Your primary responsibility is to ensure system functionality, availability, data security, and compliance with industry standard.

Responsibilities:

a. Providing level 1 technical support and respond to user inquiries via phone, email and ticketing system.

b. Hardware – installation, maintenance and trouble-shooting.

c. Diagnose and resolve hardware and software issues for end-users.

d. Escalate complex issues to higher-level support teams as necessary.

e. Maintain and update service desk documentation and knowledge base articles.

f. Proactively identify and manage potential problems

g. Conducting regular checks to ensure all endpoints are patched to the latest version.

h. Conducting regular checks to ensure all endpoints and communication devices in meeting rooms are working properly.

i. Collaborate with other IT team members on projects and initiatives.

j. Provide training and guidance to end-users on IT systems and software.

You will be working closely with the Service Delivery Manager and other Workplace Technology support team to ensure that all endpoints and communication devices are provision for properly and all incidents and service requests are resolved in a timely manner.

• · Remodels and repairs cabinets, counters, shelves, tables and furniture as required.
• · Replaces and repairs door closures and locks.
• · Builds and repairs walls, partitions, doorways, window frames, stairs and roofs.
• · Installs window glass and screens.
• · Applies wall and floor covering materials.
• · Installs and repairs ceramic and other tiles.
• · Refinishes furniture and paints and stains building interiors and exteriors.
• · To repair and service roller shutters
• · Provide supervision to less skilled carpenters.

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Performing quality checks on HVAC, air conditioning, plumbing, and electrical systems

Checking and responding to security and safety issues

Testing and recommending new maintenance products

Coordinating deliveries from vendors and suppliers

Keeping documents of inspections and problems

Doing landscaping, pool maintenance, and pest control

Keeping an inventory of cleaning and repair supplies

Able to speak English and communicate with supervisor

Need Class 3 Driving license, able to pick up and drop workers on construction site.

Able to work rotating shifts.

Able to work weekends.

Follow safety guidelines at all times

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

We are a modern Asian restaurant looking for a friendly and proactive Service Supervisor to join our team! If you genuinely enjoy working with people, have the experience and confidence in leading a team, and a passion for providing excellent customer service, then we’d like to hear from you!

Our Service Supervisor will oversee daily service, train and supervise Front of House staff, and ensure compliance with safety/sanitation regulations. The perfect candidate is an excellent team player, reliable, empathetic and handles difficult situations respectfully.

Salary: S$ 4,000 - $5,000 depending on work experience

Benefits:

• 5 Days Work Week
• Monthly Sales Incentive $250 to $500
• Staff Meals Provided
• Birthday Benefits

Responsibilities:

• Ensure that an impeccable customer experience for guests is maintained
• Manage guests’ expectations and attending to complaints, ensuring that service recovery takes precedence over most considerations
• Assist the Restaurant Manager to ensure that all Front of House team members are well-versed in company’s SOPs, and knowledge of the restaurant’s brand positioning
• Coordinate and ensure proper communication between Front of House and Back of House operations teams
• Organise, supervise and roster shifts
• To maintain a healthy work environment for all team members and assist to resolve any issues between team members
• Assist the Restaurant Manager in overseeing the beverage programme
• Assist Restaurant Manager in monthly inventory and Beverage Perpetuals, and keep track of monthly COGs
• Managing and maintaining the POS software systems
• Supervise execution of all delivery orders
• To assist the Events team with the operations and project management of client events held at the restaurant including Weddings and Corporate Events
• To assist in building a database of regular clients and providing them with efficient and professional customer service

Requirements:

• At least 2 years of hospitality experience in leading and managing a team of restaurant professionals
• Positive mindset and approachable demeanour
• Natural people skills
• A desire to deliver an experience beyond guests’ expectations
• Excellent communication skills, both written and verbal
• Confidence with handling POS systems
• Great time management and problem-solving skills
• Ability to stay calm, organised, and efficient under pressure
• Has great initiative and team leadership skills

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

TikTok LBS Platform's goal is to build a global high-quality LBS database and high-performance LBS services that connects TikTok users with nearby merchants and local services.

- Build a global POI (Point of Interest) database, multi source POI integration and POI nearby search service to support TikTok local services.

- Build geocoding database, geocoding service, and IP Location service to support TikTok local services and monetization product

- Participate in the analysis/mining of location-based data based on compliance requirements, and build a location-related data warehouse

- Develop global general location based service (LBS) with high concurrency and low latency.

- Improve system design and architecture to ensure high stability, performance and reliability of the product.

- Collaborate with multiple cross-functional teams to deliver high quality work in rapid product development.

Qualifications

Minimum Requirements

- Bachelor/Masters in Computer Science or related major

- Proficiency in building backend services for large-scale consumer-facing applications

- Proficient in at least one of the following languages: Go, Python, Java, C++.

- Deep understanding of computer architectures, data structures and algorithms.

- Familiar with common components such as MySQL, Hive, Redis, Spark, ElasticSearch, Message Queue and RPC.

Preferred Qualification:

-Experience in R&D of geographic location-based data is preferred, such as POI(Point of Interest) data, Geocoding related data.

-Experience in big data、data warehouse、streaming data flow and real time data processing system is preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

TikTok LBS Platform's goal is to build a global high-quality LBS database and high-performance LBS services that connects TikTok users with nearby merchants and local services.

- Build a global POI (Point of Interest) database, multi source POI integration and POI nearby search service to support TikTok local services.

- Build geocoding database, geocoding service, and IP Location service to support TikTok local services and monetization product

- Participate in the analysis/mining of location-based data based on compliance requirements, and build a location-related data warehouse

- Develop global general location based service (LBS) with high concurrency and low latency.

- Improve system design and architecture to ensure high stability, performance and reliability of the product.

- Collaborate with multiple cross-functional teams to deliver high quality work in rapid product development.

Qualifications

Minimum Requirements

- Bachelor/Masters in Computer Science or related major

- Proficiency in building backend services for large-scale consumer-facing applications

- Proficient in at least one of the following languages: Go, Python, Java, C++.

- Deep understanding of computer architectures, data structures and algorithms.

- Familiar with common components such as MySQL, Hive, Redis, Spark, ElasticSearch, Message Queue and RPC.

Preferred Qualification:

-Experience in R&D of geographic location-based data is preferred, such as POI(Point of Interest) data, Geocoding related data.

-Experience in big data、data warehouse、streaming data flow and real time data processing system is preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Resolve equipment faults at customers' premises and ensure timely resolution.
• Coordinate with customers and sub-contractors to manage add-on project activities.
• Track work progress closely to ensure adherence to schedules and quality standards.
• Guarantee timely delivery of materials and equipment for site installation or fault rectification, and conduct periodic maintenance for customers.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent,
• At least 2 years of experience in troubleshooting of card access systems, alarm systems, CCTV etc.
• Possess valid class 3 driving license.
• Comfortable with stand-by duty.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Location: Tuas (Company pick up available - West & North)
• Salary: $3,000 - $4,000 + OT + AWS + Performance bonus
• Working days: Monday - Friday
• Working hours: 8:30am – 4.30pm

Job Description:

• Product delivery training to distributors and customer
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.

Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess valid Class 3 Driving License

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Responsibilities

· The essential tasks of Assistant Field Service Engineer consist of, but are not limited to the following:

· Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

· Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

· Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.

· Manage all orders efficiently until fulfilment stage, by working closely with Service team.

· Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

· Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency. To provide support to other service activities that may be assigned in the course of work

· Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

· To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Requirements

· NTC 2 or Diploma in Electrical/Process Instrumentation/Mechanical/Mechatronics Engineering.

· Preferably 3-5 years’ experience in service/engineering position in oil & gas, process industry.

· Knowledge in Electrical & instrumentation is pre-request.

· With class 3 driving license (not 3A).

· Candidates without relevant experience are welcome to apply.

To apply, please visit to www.gmprecruit.com

To find out more about this opportunity, please contact Lionel Liew at [email protected].

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

• MNC Company
• Basic $5200 - $6200 + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 9am to 5.45pm
• Working Location: Science Park

Job Responsibilities:

Lab

• Analyse/Evaluate samples based on customer’s request. For example, it will be conducted by microscope, microtome, DSC, FT-IR, retort sterilizer and Oxtran
• Conduct food storage test and coordinate lab tour/demonstration/seminar when outside company visits
• Support the management of technical centre with Technical Service/Market
• Development manager such as budget management, maintenance and task allocation
• Based on analysis/evaluation result, make report and promotion tools, reviewing result from other lab team members
• Collaborate with outside company to get better results

Technical Service/Market Development (TS&MD)

• Troubleshoot, investigate, and resolve technical problems and support new development at customers
• Promote our new products that will meet customer needs
• Explore new application and launch new development project
• Promote our products to whole value chain not only direct customers but also indirect customers such as brand owners, machine makers, raw material makers to enhance our market presence and create new projects
• Investigate market trend such as brand owner’s direction, sustainable packaging design and potential market size

Requirements:

• Bachelor’s Degree in Food Science and / or Chemistry
• More than 5 years experience in food and/or food packaging industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Roles & Responsibilities

Plan, lead and supervise upgrading works, addition and alteration works

Lead a team of supervisors and workers and oversight of manpower for project execution

Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices

To attend site matters / discussions to resolve technical / site issues and progress matters

Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management

Monitor and control project schedule, materials delivery and budget etc

Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met

To supervise and ensure works are in accordance to the contract drawings and specifications

Establish and maintain a detailed tracking and filing system of all documents

To prepare, submit Variation Claims with instruction documents & part-plan from client

Maintain all filing systematically & uploading of softcopies in the system

To place materials order to Purchaser in advance as per Order list as per site requirement

Responsible for ensuring implementing safety measures

Only qualified candidates will be notified for interviews.

Job Description & Requirements

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

1. Degree in engineering specialization in electrical and electronics engineering.

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA, AUTO CAD

· At least 6 years’ experience in local project

Job Description:

• Conduct preventive, corrective maintenance & installation on monitoring systems, minimizing downtime and ensuring optimal system functionality.
• Proficiently interprete engineers' 2D drawings provided by Design engineer, ensuring accurate assembly procedures.
• Execute hands-on machine assembly setups, demonstrate precision and attention to details throughout the process.
• Conduct panel wiring for product testing, ensuring functionality and adherence to specifications.
• Possess extensive knowledge in wiring AC/DC, relay systems and PLC, contributing to efficient and reliable system operations.
• Apply expertise in panel and PLC wiring setups at production lines, ensuring seamless integration and functionality.
• Employ observational analysis to identify root causes of operational issues in devices, contribute to efficient problem-solving strategies.

About the Role:

As a CBRE Contract Support Associate, you will provide exceptional customer service and administrative support to a large Business Unit, Facility, or Account. This job is part of the Contract Quality Management job function. They are responsible for managing the delivery of contractual services to ensure requirements are fulfilled.

What You’ll Do:

• Respond to client inquiries and concerns and ensure timely and quality service delivery and follow-up to ensure satisfaction.
  Understand the scope of the contract and make sure that all work is carried out accordingly.
  Be a financial and operational systems champion.
• Suggest efforts to put in place cost-saving opportunities to maximize customer and financial savings targets.
  Coordinate and onboard vendors for reactive and planned works and manage sub-contractor paperwork.
  Review processed invoices and ensure accurate cost center coding. Coordinate the billing application, calculating margins, raising invoices, and submitting to clients.
• Work closely with site teams and head office, ensuring accurate processing of quotations and purchase orders.
• Review and approve maintenance billing invoices and projects as per contracted agreements. Ensure consistent delivery of core operational and financial outputs on the account.
• Respond to inquiries on financial reports for Accounts Receivable, Payable, and open POs.
• Deliver monthly reporting support on Contract and Business Unit Reviews.
• Assist in ensuring compliance with Health & Safety requirements, including HSE reporting and promoting a safe work environment.
• Maintain QHSE documentation and ensure it is available using company systems.
• Gather and analyze data to identify and solve complex problems that arise with little or no precedent. May recommend new techniques.
• Impact own team and other teams whose work activities are closely related.
• Suggest improvements to existing processes and solutions to improve the efficiency of the team.
  
  What You’ll Need:
• High School Diploma or GED with 3-4 years of job-related experience.
• A comprehensive understanding of a range of processes, procedures, systems, and concepts within own job function is required.
• Ability to evaluate and communicate unusual and/or complex content in a concise and logical way.
• In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Organizational skills with an advanced inquisitive mindset.
• Advanced math skills. Ability to calculate advanced figures such as percentages, discounts, and markups.

Key Responsibilities:

• Responsible for MEP Design, taking off BOQ, sourcing the quotation and prepare quotation.
• Lead the development and submission of high-quality M&E tenders, ensuring compliance with all client requirements and deadlines.
• Attend site visit for tender briefing.
• Interpretation of tender specifications, client requirement, drawings and any other relevant documents; not limited to Project Presentation, Schedule of Rates, Technical Data, Risk Assessment, Bill of Quantity and documents needed for Tender Submissions.
• Understand how to do MEP design to comply with Singapore Standard
• Liaise with suppliers and contractors to get proposals/quotations and carry out evaluation
• Able to assist client for Value Engineering
• Conversant with Singapore building codes and regulations
• Demonstrate effective communication and consultative skills
• Strong in communication skills and a team player
• Provide guidance and support to project teams in the implementation of successful M&E practices.
• Ensure adherence to company policies and procedures throughout the tender process.

Job Requirements:

• Preferably hold a Diploma or Degree in Electrical Engineering
• At least 2 years of relevant working experience in Interior Fitting Out M&E Works
• Preferably have knowledge on how to prepare M&E technical design, technical write-up, prepare tender specifications and presentation slide for tender interviews
• MUST understand the process of tender preparation and submission
• MUST have experience in project costing and estimating
• MUST know BCA Green Mark Requirement
• Strong in Tender Presentation Skill
• Highly self-motivated, good working attitude with high level of professionalism & integrity
• Well-versed in MS offices tools i.e. Words, Excel and PowerPoint
• Strong understanding of M&E methodologies and best practices.
• Excellent written and verbal communication skills.
• Requires travelling to various worksites in Singapore
• Requires to perform night work/weekends when need arises
• Candidates with more experience may be considered for a senior role.
• This position is only open to Singapore citizens and Permanent Residents.