ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Able to perform corrective Mechanical Maintenance for all Power Plant Stationary and Rotary Equipment located in Banyan CCP3 and BWWT as assigned by Mechanical Engineer /Supervisor.

Key Roles and Responsibilities

• Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing and calibration of Mechanical Equipment.
• Conduct disassembling and assembling of Mechanical Equipment and of Gas turbine, Steam Turbine, HRSG, BOP and BWWT for repairs/rehabilitation.
• Hands on experience of valves, pumps, compressors, piping, safety valves, control & shutoff valves etc
• Assist the Maintenance Mechanical Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.
• Assist the Maintenance Mechanical Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant
• Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant
• Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities
• Withdraw and prepare spares from warehouse for job execution.
• Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Qualification, Skills and Experience

• Min ITE in engineering field
• Preferably minimum 3 years of experience in the relevant maintenance fields in a power plant / petrochemical industry

Behaviour/ Traits:

• Organized, detail oriented and ability to multi task.
• Good team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Independent with initiatives, resourceful and positive attitude.
• Possess good leadership skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

· Institution-first Mindset – Put the interest of the Group ahead of individual interests.

· Collaboration – Deliver through collaborating across markets, businesses and functions.

· Accountability – Hold team and self accountable to deliver on our commitments.

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

1. Carry out site inspection at job sites
2. Troubleshoot technical issues at job sites
3. Prepare reports and quotations
4. Maintain existing customer base and provide quality csutomer service
5. Ensure prompt follow up to customer enquiries , work progress and defects work
6. Ensure smooth operation at sites and assurance to customers on quality
7. Develop new business opportunities and new networking
8. Any other Ad-hoc duties assigned.

• Min Diploma or Bachelor in Construction or Civil Engineering.
• Fresh graduates are welcome.
• Enthusiasm in soloving problem techincally
• Customer oriented attitude and good team player
• Possess good analytical skills and processing skils.
• Proactiveness and responsible
• Able to work independently and can handle stress
• Class 3 driving license with personal vehicle

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment

- Execute emergency breakdown protocols

- Assist in resolving downtime issues

- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs

- Collate and coordinate maintenance work, at times need to work with contractor

- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment

- Able to perform ad-hoc duty when require

- Basic electrical and refrigerator knowledge

- Prepare maintenance reports/records in relation to the work assignedRequirements

- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing

- “O” leave / NTC3 or NITEC in Mechanical Enginnering

- Able to performance Shift- Willing to learn new skills

- Positive work attitude

Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Requirements:

• Bachelor degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

• Role: Senior Maintenance Manager
• Industry: Chemical Plant
• Working Hours: 5days (Mon-Fri), 8 am to 4.30 pm.
• Work Location: Jurong Island (Transport Provided at Jurong East)
• Basic Salary Up to $9000 + 15 AL + AWS + VB

Requirements:

• Degree in related discipline.
• Experiences in the chemical plant / chemical industry Singapore as Manager or Assistant manager.
• Experiences and knowledge about maintenance of mechanical rotating equipment and static facilities.
• Experiences as Electrical and Instrumentation, E&I Process / Maintenance Engineer at chemical plant or manufacturing facility.
• Knowledge about and to be familiar with high voltage power supply / MCC, control panel and / or DCS design and system to manage establishment will be an advantage.

Responsibilities：

• Management of annual/specific Project and Maintenance activities/budgets (both Mechanical and E&I) throughout fiscal year to achieve department goals.
• Ensuring that the relevant maintenance strategies as well as industry best practices are applied to the activities for maintenance and modifications in the plant to achieve reliability and availability of plant equipment of the highest level.
• Ensures all plant and equipment is maintained to the highest level of safety for work to avoid lost time accidents, with immediate response and thorough investigations and corrective actions for all hazardous occurrences and accidents.
• Ensure all Mechanical and E&I maintenance activities are carried out in accordance with the Company’s HSEQ Standards, statutory requirements, Company Maintenance & Management System, and best industry maintenance practices.
• Ensuring that there are adequate procedures and systems put in place for maintenance activities conducted within the process plant.
• Oversee all facilities planning and operations/functions including the maintenance, modification control of equipment, space allocation, move and construction.
• Works with counterparts in parent and subsidiary companies on technology transfers to raise maintenance performance standards.
• Line management responsibility for Maintenance team members.
• Approval of all work requests for equipment maintenance and modifications related to improvements and safety of process and plant.
• Approval of requisition for new equipment and maintenance spares.
• Approval of Contractors’ daily timesheets.
• Approval of the daily maintenance activities and modifications in the plant.
• Approval of grade change maintenance activities, in consultation with production department
• Planning and managing the shutdown maintenance.
• Provide training needs of Maintenance team members to ensure that they have the necessary skills and competencies to carry out their work in an efficient manner.
• Assessment and review of in-house contractors’ performance and the contract.
• Undertakes special assignments or projects as directed by the Manufacturing Director

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing of Mechanical Equipment.

Key Roles and Responsibilities

· Conduct disassembling and assembling of Mechanical Equipment & Familiar with Boiler statutory inspections

· Hands on experience of valves, pumps, compressors, piping, safety valves, control & shutoff valves etc

· Assist the Maintenance Mechanical Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.

· Assist the Maintenance Mechanical Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant

· Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant

· Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities

· Withdraw and prepare spares from warehouse for job execution.

· Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)

· Flexibility in supporting other Sembcorp plants whenever required.

Qualification, Skills and Experience

· Min Higher- Nitec or Diploma in Mechanical engineering field

· Preferably minimum 5 years of experience in the relevant maintenance fields in a power plant / petrochemical industry

· Be familiar with Computerized maintenance management system.

· Good team player and able to work well with other members and stakeholders.

· Strong interpersonal, communication and management skills.

· Outcome driven and able to deliver results within tight deadlines

· Good planning, organizing, and problem solving skills.

· Creative and critical thinking skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

· Institution-first Mindset – Put the interest of the Group ahead of individual interests.

· Collaboration – Deliver through collaborating across markets, businesses and functions.

· Accountability – Hold team and self accountable to deliver on our commitments.

Job Title: Senior Maintenance Engineer (ID8358)
Location: Bukit Batok, Singapore
Working hour: Monday to Saturday, 8am to 8pm, however sometimes may required to work at off duty hours according to operation arrangement
Salary: $5500 - $6000

Job Description:
-Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimize downtime.
-Ensure the proper functioning and maintenance of machinery and equipment (such as genset, excavator etc) to support production and operational requirements.
-Coordinate tasks and resources across machinery & equipment maintenance team, and logistics & operations team to meet operational goals and deadlines.
-Oversee and ensure the Operations and Logistics adhere to safety measures during operations.
-Address operational issues and challenges, implementing solutions to maintain efficiency and productivity.
-As team leader in performing daily task, inclusive of daily reporting.
-Prepare & maintain machinery reporting & documents.

Requirement:
- Minimum of 2 – 5 years of experiences in excavator, heavy land machinery and equipment field.
· Possess knowledge on the procedures in maintenance of equipment & land machinery.
· Possess knowledge in logistics and operations will be advantages.
· Basic IT knowledge on software operating.
· Proficient in Microsoft Office application (Word, excel, powerpoint etc).
· Valid class 3 driving license (optional).
· People oriented, task oriented and possess positive work attitude.
· Strong organisational and communication skills.
· Ability to multitask, prioritize tasks, and manage time effectively.
· Problem-solving abilities and attention to detail.
· Willingness to travel to various project sites as required.

• Well Established Company
• Basic $2000 to $3000 + AWS + VB
• Working location: Hougang / Site (Island Wide)
• 5 days’ work week (8:30am to 5:30pm)
• Communications equipment (Radio; Network; Wireless)
• Training Provided

Job Responsibilities:

• Carry out daily preventive maintenance and corrective maintenance of Radio, Network and Wireless equipment at site, including inspection, troubleshooting and replacement of faulty equipment
• Run tests and interpret results to ensure equipment is operating functionally
• Assist engineer in-charge to supervise site works
• Communicate with customers and various stakeholders of the project
• Supervise subcontractors for site works

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

Responsibilities:

• Develop and implement department procedures, ensuring compliance with safety regulations and standards
• Oversee and coordinate the daily engineering operations, including conducting routine inspections and maintenance of machinery
• Manage the maintenance budget, ensuring efficient allocation of resources
• Supervise engineering staff, including hiring, training, and performance management
• Prepare preventative and maintenance schedules
• Identify and address potential issues before they result in equipment failure or downtime
• Collaborate with other departments to prioritize maintenance needs and manage work orders
• Manage inventory of maintenance equipment
• Prepare and present reports on maintenance operations and costs
• Keep abreast of advancements in maintenance and repair technologies

Requirements:

• At least Diploma or Degree in Mechanical Engineering / Chemistry or equivalent
• 3 to 5 years of relevant working experience in Chemical Industry
• Strong knowledge of chemical plant management and ESH regulations
• Strong planning, people management, analytical, and problem-solving

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Perform preventive and corrective maintenance on radio, network, and wireless equipment.
• Run tests, troubleshoot, and replace faulty equipment as needed.
• Assist in supervising site works and subcontractors.
• Communicate with customers and stakeholders about project updates.
• Be available for 24/7 standby and adapt to changing work schedules.

Requirements:

• ITE/Diploma in Electrical/Electronic Engineering or related field.
• Experience with radio, networking, and wireless equipment.
• Strong troubleshooting skills, especially in remote locations.
• Ability to read and understand technical documents and drawings.
• Proficiency in MS Word and Excel.
• Possess a valid Class 3/3A driving license and own vehicle

This position ensures that all aspects of building and facilities maintenance in the Schools is at optimum operational condition and conforms to up to date regulatory and safety requirement at all times.

Job Responsibilities:

• Preventative maintenance and ensure all facilities operate efficiently and conform to operating standards.
• Hands-on in meeting urgent repairs/complaints on electrical services, plumbing and sanitary requests.
• Proper maintenance of interior and exterior walls of buildings, appliances and equipment in the building.
• Conduct day to day inspection activities/ checking building wear & tear and defects
• Mobilise and supervise contractors on major / rectification works.
• Ensure compliance with all regulatory and safety regulations
• Comply with company safety guidelines and procedures
• Ensure accurate updates/reports are done for all work progress and completion.
• Monitors and controls expenses within all areas of the department.
• Lead and mentor a team of maintenance technicians.
• Any other duties that is assigned, inclusive of support for new school projects.

Requirements:

• Relevant Diploma/Higher Nitec/Nitec with 3 years relevant experience or
• 5 years of relevant working experience in major building maintenance/construction projects
• Possess a class 2B/3 license with own transport.

We offer a competitive remuneration package plus benefits to the right candidate. Suitably qualified applicants are invited to send your updated resume in MS Word via APPLY NOW button.

Please include cover application letter and detailed CV with current and expected salary and copies of qualifications and testimonials. On appointment original copies must be provided for verification.

• Well Established Company
• Basic $2200 - $2700 + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• 5.5 Working days

Job Responsibilities:

• To conduct final sample preparation in final sampling room
• To conduct laboratory analysis and reporting
• To assist chemist in technical development project
• To maintain the inventory of all laboratory facilities/ equipment
• To check, record and report on the inventory of all laboratory supplies
• To carry out calibration and maintenance of all laboratory equipment as per schedule or instructed
• To ensure good housekeeping in the laboratory
• To follow the existing system and documentation as per the procedures
• To update the relevant records

Requirements:

• At least ITE or Diploma in Chemistry/Chemical Process Technology/Material Science or equivalent
• Working experience in precious metal/ base metal is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3000 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Kaki Bukit
• Working hours: Normal Working Hours

Job Responsibilities:

• Carry out maintenance, repair and overhaul work on heavy vehicles
• Conduct service maintenance on trucks, including:
• Power steering diagnostics and repair
• Engine overhaul
• ESCOT control housing, gearbox, and rear axle overhauls
• Advanced multimeter measurements and wiring repairs
• Emission-related system repairs
• Electrical fault tracing, repair, and calibration using Tech Tool
• Carry out mechanical, electrical, and electronic repairs
• Any other ad hoc duties as assigned

Job Requirements:

• Possess minimum Certificate and/or NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or related field with at least 2-3 years of relevant experience
• Possess Class 3 driving license would be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working day: Monday to Friday
• Working house: 8am to 5pm

Job Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day-to-day activities
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors
• To manage all Mechanical & electrical Instruments spare parts and tools

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Min 2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Machine Operator (Maintenance & Production)
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8 AM – 5 PM, Sat: 8 AM - 12 PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• On-Job training provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67062 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Maintenance Technician
• Working Location: Senoko
• Working Hours: 5.5 working days (Mon to Fri 8.30 AM – 5 PM, Sat 8.30 AM – 12.30 PM)
• Salary Package: Basic Salary + OT + Rental Allowance + Meal Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform monthly preventive maintenance job as per planned schedule
• Support production machinery with troubleshooting and repair work
• Liaise with external vendors to resolve major machine issues
• Assist superior with new production equipment installation and commissioning
• Comply with food safety and workplace safety and health (WSH) requirements
• Any ad hoc duties as assigned

APPLY NOW!!!

• Minimum NITEC in Engineering or equivalent
• At least 1 year of working experience in the maintenance field of the food industry

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66084 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Mondays to Fridays, 8am to 5pm

Requirement:

• English-speaking
• Physically fit
• Experience in office cleaning

Scope of Work:

• Vacuuming and mopping of floor
• Spot cleaning of glass panels, doors and windows
• Upkeep of office workstation cleanliness
• Maintain meeting rooms and pantry cleanliness
• Serving of drinks to guests and management staff
• Clearing of waste disposal bins
• Collection of mails from letterbox

Working location: Church Street

Interested applicants, please contact us at 93713648 (office) or 86602259 (Manager)

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

• MNC Company
• Salary $2500 - $3000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tai Seng
• Working hours: Normal Working Hours

Job Responsibilities:

• Install electrical appliances, using hand tools or measuring instruments
• Build, calibrate, maintain, troubleshoot, or repair electrical or mechanical instruments
• Inspect electrical appliances for quality control and assurance
• Identify solutions to on-site technical design problems involving electrical and mechanical systems equipment
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum GCE ‘O’ level with at least 1-2 years of relevant experience
• Possess Class 3 driving license with own vehicle will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492