Job Description:

• Routinely inspecting electrical and instrumentation systems such as wiring, fixtures, and appliances.
• Identifying faults or hazards.
• Troubleshooting system failures.
• Reviewing blueprints to understand wiring placement.
• Testing of electrical systems with oscilloscopes, voltmeters, and ohmmeters.
• Testing of instruments, DCS loop and field calibration.
• Conducting maintenance repairs on faulty fixtures.
• Responding to fault requests
• Providing suggestions for equipment replacement.
• Writing electrical maintenance reports.
• Installing new electrical appliances in the building.
• Adhering to safety and performance standards.

Job Requirements:

• Min Diploma / Bachelor's degree in Electrical Engineering or related field
• Minimum 5 years of working experience, preferably in a Process Plant setting, with at least 2 years in a supervisory role

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description:

- Assist camp manager to manage daily operation according to Preservation contract requirement.

- Schedule of work and loading for team members.

- Assist manpower allocation if given a team to manage.

- Supervise a group of ground support staff.

- Guide and train junior technician.

- Perform corrective or preventive maintenance on equipment that are managed by us.

- Conduct inspection of equipment according to contract requirement.

Job Requirements:

- NITEC or equivalent in relevant engineering field with at least 5 years of working experience.

- Possess Class 3 driving licence

- Ability to work independently.

- This position require to work in Nee Soon and Selarang camp.

- Working experience on repairing military equipment / vehicle is preferred

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Senior Admin Manager (Specialised in Vehicle Import and Export )

A Senior Admin Manager/ Senior Admin Executive who can handle full set of export and import of vehicle fleets and compliance with LTA rules and regulations.

Here are the detailed roles and responsibilities associated with the position:

1. Export and Import of Vehicle Fleet

• Coordination of Fleet Export/Import: Responsible for managing the entire process of importing and exporting vehicle fleets, including paperwork, logistics and coordination with customs, transport agencies, and freight forwarders.
• Regulatory Compliance: Ensure compliance with all local, national,international laws and regulations related to vehicle import and export (such as tariffs, taxes, duties, import/export documentation and environmental standards).
• Documentation Management: Prepare and maintain accurate documentation for all vehicle imports and exports, including:
• Bill of lading
  • Customs declarations
  • Vehicle inspection reports
  • Registration and licensing forms
  • Certificates of origin, emission, or other required certificates
  • 
    
• Customs Clearance: Ensure timely and efficient clearance of vehicles through customs, resolving any issues related to documentation or regulatory compliance.
• Inventory Management: Maintain an updated inventory of vehicles, ensuring proper tracking and reporting of vehicles in transit or awaiting export/import.
• Shipping and Freight Coordination: Work closely with shipping companies, logistics providers, and freight forwarders to coordinate transport arrangements for the vehicles.
• Vendor and Stakeholder Relations: Build and maintain strong relationships with external vendors, government bodies, customs officers, and other key stakeholders involved in the export/import process.
• Cost Control and Budgeting: Monitor and control costs associated with vehicle import/export activities, ensuring budget adherence.
• Risk Management: Identify and mitigate risks associated with vehicle exports/imports (such as damage during transit, delays, or non-compliance issues).

Skills and Qualifications:

• Education: A bachelor’s degree in Business Administration, Logistics, or a related field. A master's degree or certification in logistics, supply chain management, or a similar area is preferred.
• Experience: Significant experience in fleet management, logistics coordination, or administrative management, especially within export/import operations.
• Regulatory Knowledge: Strong understanding of import/export regulations, customs processes, and vehicle registration procedures.
• Strong Organizational Skills: Ability to manage multiple tasks, track large amounts of data, and handle complex logistical processes.
• Communication Skills: Excellent written and verbal communication skills, particularly in dealing with external stakeholders like customs officials, shipping companies, and regulatory bodies.

Work Location : Funan, Near City Hall MRT

Full Time, Permanent Position

6 days work week

$5,000 - $6,000 per month (based on experience)

Looking for a cheerful and driven person to join our rapidly expanding team.

A perfect setting to gain experience in an industry with a high demand for manpower, you should be able to recruit and administer admin related matters consistently while being meticulous with the relevant paperwork.

Craft and post job listings on job recruitment boards and other websites to attract applicants.

Conduct interviews and recruitment

Able to work in a fast paced, challenging environment.

Aggressive, friendly, proactive, and responsible person

Possess basic computer skills and knowledge

Handling of daily administrative work (eg. preparing documents etc)

Able to negotiate

Posses strong drive to learn

Assist HR Manager

Any other ad-hoc duties as assigned

Accessible, conducive, pleasant and friendly working environment.

Benefits:

• Basic Salary up to $2,500 with yearly increment based on performance.
• Working pattern (4/3/4/3)
• Working timing 8:30am to 9:00pm
• Fixed attendance allowance of $200 per month
• Guaranteed AWS + OT pay eligible
• Performance bonus
• 1 year cash completion bonus
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Preventive Maintenance Technician (Semiconductor) located in Woodlands. Our clients are headquartered in the USA and established as the global key leader in the Semiconductor industry. You will be following the daily preventive maintenance schedule, managing the arrangement and logistics of new and old parts, and preparing and maintaining PM jigs and tools. Key tasks involve performing preventive maintenance on robots, such as cleaning and greasing parts, and replacing sensors, motors, and motor drivers. The role also requires the installation of vacuum valves, fore line pipes, and heater jackets. Additionally, the individual will assist tool owner engineers with technical activities like troubleshooting, modifications, installations, and de-installations in the fabrication area. Support for 6S practices, including parts cleaning, organization, labeling, and housekeeping, is also a significant part of the job.

Qualifications:

• Min. NITEC or Diploma in any Engineering field or equivalent certification
• Willing to do hands-on work and comfortable to be in cleanroom suit
• Work experience in semiconductor industry will be an added advantage

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Lift servicing and maintenance is considered by the Government as an essential service and a job that last forever.

Join the trade and earn high salary with CPF, Medical, Annual leaves and other benefits governed by MOM Employment Acts.

Job Scope:

· To carry out monthly services/maintenance on lift/elevator

Requirements:

· Minimum Nitec qualifications

· Healthy and like doing hands-on job

· Experience in lift maintenance is preferred but no necessary. Training will be provided FREE.

Earn up to $3000/month

Apply / Contact us now to find out more.

• Carry out inspections of all roads and road-related facilities.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Minimum 3 years experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary

Regularly performs the full range and scope of maintenance and housekeeping services that include, but not limited to: the upkeep of buildings, grounds, fixtures, equipment, NEXCOM Hospitality Group (NHG) guest rooms, public spaces, etc. Assignments include simple painting, plumbing, carpentry,

electrical repairs, maintenance using various equipment, etc. Takes initiative to ensure all aspects of the facility are working correctly.

Duties & Responsibilities

• Performs work in at least two of the following trades in the maintenance and repair of buildings and related fixtures. Maintains work order log and follows up as required. Reports status to supervisor. Logs trouble calls with contractor, as appropriate.
• Plumbing: Makes basic plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, shut-off valves on washing machines and water supply which can be accomplished by removing, cleaning, resealing, replacing defective parts or units, installing water heaters, garbage disposals, faucets and sinks.
• Washer/Dryer repair: Performs routine maintenance on washers and dryers to include cleaning lint ducts and vents, replacing hoses and fittings as required, and referring more complex problems to supervisor for action.
• Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units as appropriate.
• Electrical: Recognizes and reports electrical problems making repairs as appropriate. Replaces fluorescent and incandescent ballasts, bulbs and tubes.
• Carpentry: Measures, cuts and constructs or repairs wood or wood substitute items. Conducts basic carpentry repairs such as repairing or replacing screens; window and door frames; molding and trim; and repair and replacement of drywall or similar products.
• Painting: Preparation of areas and standard coating methods such as brushing, rolling and spraying and ensure surfaces are fully coated, protected and free from drips and runs.
• Responsible for a variety of semi-skilled and unskilled tasks involving standard methods related to the operation and maintenance of facilities.
• Work assignments (completed and in-progress) are spot-checked on a daily basis via documented inspection reports to assure that work practices, techniques, records, and other functions are technically accurate and in compliance with instructions. Recurring assignments (e.g. follow-up on maintenance requests reported by guests, housekeeping, or front desk) are carried out independently without specific instructions.
• Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, commonly used chemicals and basic safe work practices is required.
• Complete all required safety/security training.
• Required to do considerable standing, bending, walking, pushing, pulling, and climbing. Must have ability to perform moderately strenuous physical labor as unassisted lifting, moving, and carrying of supplies and equipment weighing up to 45 pounds (100 pounds assisted) is required. Must be able to climb/descend stairs and ladders, stoop, bend, kneel and work in uncomfortable positions.
• Work involves normal risks or discomforts associated with property operations, facility management, and/or mechanical systems. Work is performed both indoors and outdoors with potential exposure to extreme weather or temperature conditions. Occasional exposure to dusty or dirty conditions exists when visiting rooms or facilities undergoing repair, maintenance, or renovation. Personal Protective Equipment (PPE) is provided.
• Incumbent is expected to perform daily work on own initiative and carry out assignments in accordance with DOD and Navy regulations. Situations involving unfamiliar problems not covered by instructions are referred to the supervisor for resolution.
• Typically employee uses routine instructions and work methods that are common to the trade and may be general in nature. Where available the incumbent will rely on blueprints, manufacturer's instructions, manuals, and maintenance specifications.
• May be required to possess a valid state driver license, as travel to other facilities may be required within the normal scope of duties. Applicants will be notified when this is a requirement for appointment.
• This position is subject to the possibility of workdays on weekends and holidays, as well as, rotating shifts, often consisting of other than normal duty hours. May be recalled to duty and/or required to work overtime, including on an emergency basis.
• Performs other related duties as assigned

Education & Qualifications

• Technical certification
• Minimum two years of experience with demonstrated skill in two areas (Carpentry, Plumbing, HVAC, Electrical, Painting).
• Knowledge in the applicable combination of trades sufficient to perform the duties of the position.
• Basic knowledge of trade practices sufficient to complete tasks using common skills.
• Familiarity with safe use of common hand and powered tools.
• Possession of, or ability to obtain a valid driver's license is preferred but not mandatory.

Required Documents

• A copy of highest education certificate.
• A copy of full transcripts of corresponding education used to support this application.

Conditions of Employment

• Satisfactorily complete and maintain clearance of a Local Agency Check (LAC).

Benefits

• Eligibility to accrue leave, be placed in a comprehensive employee group insurance program and enjoy a one-month annual wage supplement.

How To Apply

• Applicants must apply via MyCareersFuture for consideration.

Full-Time Cleaners Wanted! (SG or PR ONLY)

诚聘全职清洁工!（SG 或 PR)

Salary: $1650-$1740+ Yearly Bonus

薪资：$1650-$1740 + 年终花红

Working Hours: 7:00am to 3:00pm，*Saturday 7:00am to 11:00am

工作时间：早上 7:00 至下午 3:00, *星期六早上7:00至11:00

Working Days: Monday to Friday (5 days) or Monday to Saturday (5 & half days)

工作日：周一至周五 （五天）or 周一至周六 （五天半）

Location: Near Joo Koon MRT

地点：裕群地铁站附近

Job Description: 职位描述：

• Easy general cleaning of indoor premises
• 轻松进行场所的总体清洁
• Sweeping and mopping of floors
• 扫地和拖地
• Clean 3 x Small Toilet daily
• 每天清洁 3 个小间厕所
• Clearing of rubbish

Interested please call or WhatsApp +65 8768 5091

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Machine Operator (Maintenance & Production)
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8 AM – 5 PM, Sat: 8 AM - 12 PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• On-Job training provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67062 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Maintenance Technician
• Working Location: Senoko
• Working Hours: 5.5 working days (Mon to Fri 8.30 AM – 5 PM, Sat 8.30 AM – 12.30 PM)
• Salary Package: Basic Salary + OT + Rental Allowance + Meal Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform monthly preventive maintenance job as per planned schedule
• Support production machinery with troubleshooting and repair work
• Liaise with external vendors to resolve major machine issues
• Assist superior with new production equipment installation and commissioning
• Comply with food safety and workplace safety and health (WSH) requirements
• Any ad hoc duties as assigned

APPLY NOW!!!

• Minimum NITEC in Engineering or equivalent
• At least 1 year of working experience in the maintenance field of the food industry

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66084 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• MNC Company
• Salary $2500 - $3000 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm
• Training provided for those without/lesser experience

Job Responsibilities:

• Responding to calls for scheduled and unscheduled maintenance service request in accordance with the Company’s Service Agreement
• To trouble-shoot and repair any system abnormality during maintenance service call at the customers’ premises
• To supervise and control sub-contractors’ work quality for maintenance work
• To render technical support to the other departments’ staff
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Higher Nitec and/or Nitec in Electronics and/or Electrical Engineering or relevant field
• Possess Class 3 Driving License will be an added advantage
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

about the company

Our client is a leading global tank storage company serving primarily the manufacturing and energy markets. They have facilities and terminals globally and are now looking for a reliable and experienced Maintenance Manager to lead their maintenance team.

about the job

• Responsible for leading and managing the maintenance function in the terminal operations to ensure efficient and effective maintenance of asset reliability and integrity.
• Lead department in the overall installation, maintenance and repairs of all terminal assets, necessary for the continuity of operations and the safety of terminal personnel.
• Manage maintenance contractors and service providers
• Plan and manage the department's resources and budget to meet the company's objectives.
• Contribute to the development of annual and longer-term business plans, forecast performance against business key performance indicators, develop business case for new projects and estimate financial and resources required
• Manage department resources on supporting terminal or company on ad hoc projects and activities
• Monitor maintenance on site is carried out in accordance with safety, health, environment and loss preventive policies, rules, regulations and according to company’s standards.
• Drive relevant processes to ensure execution of projects and identify continuous improvement opportunities
• Lead maintenance engineers in project management of CAPEX projects or commercial inquiries
• Manage Sustaining and Service CAPEX projects.
• Provide leadership and manage people competencies and development

job requirement

• Diploma/Degree equivalent in engineering
• Minimum 10 years of relevant maintenance experience in oil terminal storage environment
• Knowledge of safety, health and environment practices
• Demonstrated leadership and people management skills
• Positive stakeholder management capabilities with strong communications skills
• Project Management skills
• Able to communicate in Bahasa Indonesia,Malay fluently due to the need to serve Bahasa Indonesia-speaking customers / stuffs who cannot speak english
• Able to be based permanently around Batam area (Mon to Fri)

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description:

• Perform Robot PM: Parts cleaning and greasing, replacement of sensors, motors, motors drivers etc
• Installation of Vacuum valves, foreline pipes, heater jackets
• Support tool owner engineer to do technical activities in fab; trouble shoot, modification, installation, de-installation
• Support 6S & logistic activities ( parts cleaning, arrangement, labelling, housekeeping )

Job Requirements:

• Min Nitec in any engineering or relevant discipline
• Willing to do hands-on work and comfortable to work in Clean room suit
• Able to commit to the shift hours required

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

• Position : ALL WELCOME - Maintenance Specialist (Deep Hole Drilling for metal products in oil and gas industry)
• Location : Tuas
• Working hours : 5 days - Monday - Friday: 7:30am to 5:15pm
• Salary (commensurate with experience) Up to $4800 (Basic up to $4000 +$110 Transport Allowance) + Performance Bonus
• Duration : Permanent
• Industry : MANUFACTURER AND REPAIR OF MACHINERY

Main Responsibilities:

• Monitor the machines and company equipment operational performance and condition
• Conduct preventive maintenance to machine and company equipment as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipment
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Requirements

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years’ experience in machine repair and maintenance
• Have training with Quality Management and its related Quality Procedures is an advantage
• Knowledge to repair and maintain machines e.g. CNC Turning, Milling, Honing, Drilling is an advantage.
• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.