• Carry out inspections of all roads and road-related facilities.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Minimum 3 years experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Job Summary

Regularly performs the full range and scope of maintenance and housekeeping services that include, but not limited to: the upkeep of buildings, grounds, fixtures, equipment, NEXCOM Hospitality Group (NHG) guest rooms, public spaces, etc. Assignments include simple painting, plumbing, carpentry,

electrical repairs, maintenance using various equipment, etc. Takes initiative to ensure all aspects of the facility are working correctly.

Duties & Responsibilities

• Performs work in at least two of the following trades in the maintenance and repair of buildings and related fixtures. Maintains work order log and follows up as required. Reports status to supervisor. Logs trouble calls with contractor, as appropriate.
• Plumbing: Makes basic plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, shut-off valves on washing machines and water supply which can be accomplished by removing, cleaning, resealing, replacing defective parts or units, installing water heaters, garbage disposals, faucets and sinks.
• Washer/Dryer repair: Performs routine maintenance on washers and dryers to include cleaning lint ducts and vents, replacing hoses and fittings as required, and referring more complex problems to supervisor for action.
• Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units as appropriate.
• Electrical: Recognizes and reports electrical problems making repairs as appropriate. Replaces fluorescent and incandescent ballasts, bulbs and tubes.
• Carpentry: Measures, cuts and constructs or repairs wood or wood substitute items. Conducts basic carpentry repairs such as repairing or replacing screens; window and door frames; molding and trim; and repair and replacement of drywall or similar products.
• Painting: Preparation of areas and standard coating methods such as brushing, rolling and spraying and ensure surfaces are fully coated, protected and free from drips and runs.
• Responsible for a variety of semi-skilled and unskilled tasks involving standard methods related to the operation and maintenance of facilities.
• Work assignments (completed and in-progress) are spot-checked on a daily basis via documented inspection reports to assure that work practices, techniques, records, and other functions are technically accurate and in compliance with instructions. Recurring assignments (e.g. follow-up on maintenance requests reported by guests, housekeeping, or front desk) are carried out independently without specific instructions.
• Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, commonly used chemicals and basic safe work practices is required.
• Complete all required safety/security training.
• Required to do considerable standing, bending, walking, pushing, pulling, and climbing. Must have ability to perform moderately strenuous physical labor as unassisted lifting, moving, and carrying of supplies and equipment weighing up to 45 pounds (100 pounds assisted) is required. Must be able to climb/descend stairs and ladders, stoop, bend, kneel and work in uncomfortable positions.
• Work involves normal risks or discomforts associated with property operations, facility management, and/or mechanical systems. Work is performed both indoors and outdoors with potential exposure to extreme weather or temperature conditions. Occasional exposure to dusty or dirty conditions exists when visiting rooms or facilities undergoing repair, maintenance, or renovation. Personal Protective Equipment (PPE) is provided.
• Incumbent is expected to perform daily work on own initiative and carry out assignments in accordance with DOD and Navy regulations. Situations involving unfamiliar problems not covered by instructions are referred to the supervisor for resolution.
• Typically employee uses routine instructions and work methods that are common to the trade and may be general in nature. Where available the incumbent will rely on blueprints, manufacturer's instructions, manuals, and maintenance specifications.
• May be required to possess a valid state driver license, as travel to other facilities may be required within the normal scope of duties. Applicants will be notified when this is a requirement for appointment.
• This position is subject to the possibility of workdays on weekends and holidays, as well as, rotating shifts, often consisting of other than normal duty hours. May be recalled to duty and/or required to work overtime, including on an emergency basis.
• Performs other related duties as assigned

Education & Qualifications

• Technical certification
• Minimum two years of experience with demonstrated skill in two areas (Carpentry, Plumbing, HVAC, Electrical, Painting).
• Knowledge in the applicable combination of trades sufficient to perform the duties of the position.
• Basic knowledge of trade practices sufficient to complete tasks using common skills.
• Familiarity with safe use of common hand and powered tools.
• Possession of, or ability to obtain a valid driver's license is preferred but not mandatory.

Required Documents

• A copy of highest education certificate.
• A copy of full transcripts of corresponding education used to support this application.

Conditions of Employment

• Satisfactorily complete and maintain clearance of a Local Agency Check (LAC).

Benefits

• Eligibility to accrue leave, be placed in a comprehensive employee group insurance program and enjoy a one-month annual wage supplement.

How To Apply

• Applicants must apply via MyCareersFuture for consideration.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Maintenance Technician
• Working Location: Tuas (Transport Provided)
• Working Hours: Monday – Friday (8.15 AM to 5 PM)
• Salary Package: Basic Salary up to $2,200 + OT + AWS + Bonus + Transport Allowance + Attendance Allowance
• Duration: Permanent

Key Responsibilities

• Assist the Maintenance Engineer in maintaining plant machinery and facilities.
• Perform scheduled and preventive maintenance tasks.
• Respond to machinery breakdowns and assist in repair work.
• Carry out welding and fabrication duties.
• Install equipment and fixtures.
• Support new projects, electrical wiring, and engineering tasks.
• Update and maintain records of plant equipment and machinery.
• Manage the spare parts inventory.
• Prepare monthly reports on utility usage.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum O-level/NITEC qualifications
• Candidates who have welding certificates/experience are an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67713 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Jobscope:

Perform job planning & scheduling and manage execution of facility maintenance activities:

• Work Planning & Coordination: Develop detailed job plans, sequence tasks, and allocate required manpower, scaffolding, and insulation. Identify and order necessary materials from stock or external suppliers. Conduct walkdowns to develop job plans and explain the scope to stakeholders.
• SAP Management: Handle SAP work orders, ensuring proper planning, scheduling, and closure. Manage work order backlogs, prioritize them, and maintain proper documentation. Familiarity with SAP modules like notifications, work orders, maintenance plans, and material management is crucial.
• Documentation & Reporting: Develop and maintain work packages, track work order backlogs, and generate reports on maintenance effectiveness and costs. Manage calibration records and support risk assessments and root cause analysis.
• Facility Support: Work closely with engineers and various departments to plan and support facility maintenance during normal operations and turnarounds. Lead the turnaround schedule and provide updates.
• Training: Provide technical training and equipment introductions to contractors.

Requirements:

• Diploma and/or Bachelor’s in relevant engineering (Mechanical or E&I or Mechatronics)
• 5 years of experience as a facility technician/executive.
• Know-how in facility maintenance processes and equipment covering: HVAC, blowers, fans, compressors, chillers, Fire Systems, Security access and monitoring systems, Basic electrical and communication equipment
• Experience with SAP
• Ability to understand technical drawings and equipment documentation
• Strong communication and organizational skills and ability to work under pressure
• Ability to analyze situations, make decisions and provide related technical solutions to maintenance challenge.
• Willing to work in Jurong Island

To apply, please visit www.gmprecruit.com and search for Job Reference: 24941

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R1109239

Additional Information:

• Mon to Fri (8am to 5pm)
• Transport provided from Jurong East MRT
• Chemical Manufacturing Plant
• New headcount for expansion

Responsibilities:

• Generate spare parts list for the equipment, reliability for critical spares, work with IT department to transfer the list into BOM list, ensure physical and SAP system count are tally.
• Drive and lead the spare parts management process with contractor resources.
• Knowledge of SAP for scheduling maintenance work activities.
• Work with stakeholders to ensure the work task to be planned, scheduled and performed.
• Coordinate and engage operations to ensure all job requests are clear & concise and maintenance work orders are prioritized.
• Carry out site checks & planning of work orders end to end process, maintenance activities into tasks with resources, parts/material, craft/manpower and sequences for optimal work execution.
• Planning of work orders issue to the relevant engineers/contractors for execution.
• Compliant with EHS standards and accountable for all assigned activities.
• Support the project in pre and commissioning activities such as verifying site check and witness commissioning activities.
• Responsible for material procurement and availability prior to execution of all maintenance works.
• Create and maintain EHS, corrective maintenance activities.
• Actively monitor the actual work execution in terms of cost, resource, schedule and update the equipment plans accordingly.
• Accountable for ensuring that preventive/corrective maintenance compliance and timely closure of work orders.
• Initiate EHS plans/job safety analysis for the planned work orders to ensure safe execution of work.
• Ensure maintenance plans are scheduled accordingly and executed before their due dates.
• Accountable to ensure no overdue of all prevention/correction work including the necessary materials procure and availability.
• Assist in budget planning based on past years cost trending and provide inputs to improve contract strategy.
• Contribute and participate actively in site reliability improvements.
• Use Computerized Maintenance Management System in compliance with the global maintenance and business processes.

Requirements:

• Degree/Diploma or equivalent preferably in Mechanical Engineering.
• At least 5-10 years relevant field experience as Plant Engineer preferably with Mechanical Engineering background.
• Experienced in chemical process plant preferred.
• Prior relevant knowledge in EHS, Risk Management, Plant Operations, Reliability, Process Technology, MOC Management, Budgeting and RCA
• Strong communication and written skills
• Prior work experience using SAP system is preferred.

Interested applicant, please submit your application now!

We regret that only shortlisted candidates will be notified.

EA License No.: 23C1461

EA Reg. No.: R24120207 (Soh Yan Cheng Andrew)

By submitting your personal information and/or resume, you are deemed to consent to CareerVisors Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Maintenance Coordinator

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

To coordinate Maintenance Activities between Production and Technical department. Support GCM/SDM MA & MO activities. Support work permit and authorization activities.

Responsibilities:

• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan.
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed.
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well.
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage.
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up.
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production.
• Support work permitting and work authorization activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Related working experience in the chemical industry.
• Diploma/Degree in relevant field.
• Minimum 2-3 years of experience in maintenance planning and coordination.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

About our client: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station)

About the role:

• To Coordinate maintenance activities between the Production and Technical departments and assist with GCM/SDM MA & MO activities.
• Support work permit and authorization processes.
• Attend daily operation and maintenance meetings to provide updates on progress and maintain alignment with planned activities.
• Oversee all maintenance tasks, including safe permit issuance, lockout-tagout preparation, GSAP approval, and assisting relevant teams to ensure successful completion of maintenance work.
• Prepare equipment for the transition from maintenance to commissioning, ensuring that all tasks are completed effectively.
• Support Capital Projects/MOC activities, ensuring that blanking, isolation, LOTO, and flushing procedures are followed for safe handling.
• Collaborate with Maintenance Engineers during the planning and commissioning stages of transition and turnaround activities.
• Prepare markup PIDs for all GCM activities during the transition period to ensure safe and timely start-up.
• Work with shift team supervisors to ensure maintenance tasks, such as cleaning, washing, and follow-up jobs by technical or in-house contractors, are completed before handing over to production.
• Assist with work permitting and work authorization activities.
• Perform other duties and assignments as directed by supervisors.

About you:

• Relevant experience in the chemical industry.
• Diploma or degree in a relevant field.
• A minimum of 2-3 years' experience in maintenance planning and coordination.
• Strong communication and teamwork skills.
• Ability to work independently and collaborate effectively with all levels of the organization.
• Proficient in MS Office applications (Word, PowerPoint, Excel).
• Strong time management skills with the ability to prioritize tasks effectively.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Location: 81 Beach Rd, Singapore 189692

Working days : 6 days ; 8 hours/day

Salary : $2000 - $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

[Order Number: 707232-R]

Responsibilities

• Act as the main point of contact between customers and internal teams, ensuring effective communication and timely resolution of technical and maintenance issues.
• Provide hands-on troubleshooting and maintenance for power plant systems, including root cause analysis and resolution of operational and mechanical issues.
• Plan and oversee scheduled and unscheduled maintenance activities, coordinating with customers, technical advisors, and vendors to ensure efficient execution.
• Monitor and report key performance metrics, including reliability, availability, and maintainability (RAM), and present findings and recommendations to customers.
• Identify and mitigate operational risks, support system improvements, and collaborate with remote monitoring hubs and technical support teams to enhance system reliability.

Requirements

• More than 3 years of experience as a Mechanical Maintenance Engineer in the petrochemical or chemical industry.
• Previous site work experience in Long-Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or rotating equipment in industrial plants is preferred.
• Strong troubleshooting skills, with expertise in mechanical systems and components, instrumentation, controls, and plant operational aspects.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Operation Technician, Team Leader (Chemical Plant/Incinerator)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working day: Monday to Friday
• Working house: 8am to 5pm

Job Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day-to-day activities
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors
• To manage all Mechanical & electrical Instruments spare parts and tools

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Min 2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)