Maintenance Manager

Responsibilities:

• Serve as the main point of contact for the maintenance project.
• Coordinate maintenance requests, receive instructions, and attend meetings.
• Ensure all works comply with the approved works program and methodology.
• Manage relationships with clients, contractors, and suppliers.
• Prepare and submit reports, quotes, and other required documents.
• Review and accept deliverables.
• Supervise the Maintenance Team.
• Arrange major contracts for services performed by sub-contractors.
• Establish service agreements, including leases and insurance for vehicles and policies related to maintenance work.
• Conduct regular reviews of the Maintenance Plan with the Project Manager.
• Submit monthly maintenance reports and attend all maintenance meetings.
• Plan and schedule routine preventive maintenance.
• Review the performance of routine preventive and corrective maintenance with Team Leads.
• Conduct regular reviews of Standard Maintenance Procedures.

Qualifications:

• Relevant engineering/technical degree or diploma from a recognized university or tertiary institution.
• At least 5 years of relevant working experience in the maintenance of IT or electronic systems.
• PMP certification required for diploma holders.

Office Location : West

Working Location : Singapore

**Only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

Maintenance Engineer | 5 Days | Up to $4k | Tuas

Location: Tuas Avenue
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Overview:

The Building Maintenance Handyman is responsible for performing various general maintenance tasks to ensure the smooth functioning of the building’s systems and infrastructure. The role includes troubleshooting, repairing, and maintaining the physical condition of the property, addressing maintenance issues as they arise, and performing preventive maintenance to minimize downtime and ensure the safety and comfort of building occupants.

Key Responsibilities:

• General Maintenance: Perform basic repairs and maintenance work for plumbing, electrical, HVAC, carpentry, painting, and general building upkeep.
• Troubleshooting & Repair: Diagnose and fix issues related to doors, windows, light fixtures, plumbing, heating/cooling systems, locks, and other building systems.
• Preventive Maintenance: Conduct routine inspections of building facilities, equipment, and systems to identify and address potential issues before they become significant problems.
• Safety & Compliance: Ensure that all work complies with safety standards, building codes, and legal requirements. Maintain a clean and safe work environment.
• Emergency Repairs: Respond to emergency maintenance requests and prioritize repairs to minimize disruptions to building operations and occupancy.
• Inventory & Supplies: Monitor and manage inventory of maintenance tools, parts, and supplies. Order supplies as needed to ensure adequate stock.
• Collaboration: Work closely with building management and other maintenance staff to coordinate maintenance schedules, improve building systems, and address tenant concerns.
• Documentation: Keep records of maintenance work, repairs performed, and parts used for tracking purposes. Provide regular reports to management on building status and repairs.
• Special Projects: Assist in larger-scale maintenance or renovation projects as needed, following proper protocols and safety measures.

Requirements:

• Experience: Proven experience as a maintenance worker or handyman in a commercial or residential building environment.
• Technical Skills: Knowledge of building systems, including HVAC, electrical, plumbing, and mechanical systems. Ability to handle a wide range of general maintenance tasks.
• Problem-Solving Skills: Strong diagnostic and problem-solving abilities. Ability to troubleshoot and resolve issues effectively and efficiently.
• Physical Stamina: Ability to perform physical labor, including lifting, bending, standing for extended periods, and working with various tools and equipment.
• Safety Awareness: Knowledge of safe work practices and the ability to work with a variety of tools and equipment in a safe manner.
• Communication Skills: Good verbal and written communication skills to interact with building management, tenants, and contractors.
• Certifications (Preferred): Relevant certifications (e.g., HVAC, electrical, plumbing) are a plus but not required.
• Availability: Ability to work flexible hours, including evenings and weekends, in case of emergencies.

Physical Demands:

• Work in various weather conditions, including outdoor tasks during.
• Ability to climb ladders, work in confined spaces, and perform tasks at heights.

Work Environment:

• The position requires working in a variety of environments, including commercial, residential, or industrial buildings.
• May involve exposure to hazardous materials or chemicals (with safety precautions).

Responsibilities:

• Maintain Troubleshoot, repair, services & maintain.
• Perform on-site and in-house Conyrol and services / repair.
• Complying with service standards, work instructions and customers' requirements.
• Servicing works (maintenance service, chemical treatment, overhaul treatment and etc.)
• Carry out preventive and breakdown maintenance.
• Trouble shoot and resolve technical issues.
• Testing and commissioning of the equipment.
• Report all problems identified during preventive maintenance and carry out repair works.
• Ensure drain pipe is free of dust/dirt and draining properly.
• Performing jobs promptly and efficiently.
• Lead the team of technicians to carry out work efficiently.
• Send workers from Place of Stay to various work sites and vice versa.
• Purchase, collection and delivery of materials/goods from supplier or vendor to sites.
• Perform loading and unloading of goods/materials.
• Ensure timely delivery of goods/materials to sites.
• Perform basic maintenance / upkeeping of vehicle.
• Any other duties as assigned.

Requirements:

• Preferably at least 4 years of relevant supervisory and hands-on experiences in maintenance, troubleshooting and systems.
• Must be independent and must be able to lead the team of technicians.
• Able to work under pressure and in a fast-paced environment.
• Physical work required and be able to work long hours.
• Class 3 with forlift licence.
• Diploma/Degree education on field.
• All races welcome.

• · Remodels and repairs cabinets, counters, shelves, tables and furniture as required.
• · Replaces and repairs door closures and locks.
• · Builds and repairs walls, partitions, doorways, window frames, stairs and roofs.
• · Installs window glass and screens.
• · Applies wall and floor covering materials.
• · Installs and repairs ceramic and other tiles.
• · Refinishes furniture and paints and stains building interiors and exteriors.
• · To repair and service roller shutters
• · Provide supervision to less skilled carpenters.

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

CHAN KAM HUI (R24125233)

EA Recruitment Pte Ltd

EA License No: 21C0492

1. Salary range: $2,400 - $2,800 Basic; Mon-Fri, 8am - 5pm

• Prepare weekly job progress reports for submission
• Follow up on all audit reports ( ISO, safety, energy and water efficiency & saving) with audit team.
• Issuing P/R and following up on J/R reports.
• Tracking and managing monthly purchasing and expense reports.
• Nitec/Higher Nitec/Diploma in any discipline
• Proficient in in Excel and PowerPoint.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Machine Operator (Maintenance & Production)
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8 AM – 5 PM, Sat: 8 AM - 12 PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• On-Job training provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67062 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

whatsapp:85986715

Apartment hotel maintenance personnel (two days of trial work, with subsidized)

Job content: wall painting, silicone corners in the bathroom, plumbing (unclogging the basin, clogged toilet), water heater leakage, adjusting loose door closers, repairing electrical appliances such as vacuum cleaners, etc

Apprentice salary: $2,500, $100 for transportation, $100 for meals

Salary for skilled worker: S$2800-3200, salary to be determined after trial work

9 a.m. - 6 p.m. (Monday to Friday)

9 a.m. - 1 p.m. Saturday, public holidays require work

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

This role will ensure the smooth operation of all production equipments through maintenance of repair records, collaboration with internal and external teams, and compliance with Food Safety requirements. The role involves coordinating maintenance tasks, managing inventories, analyzing data for process optimization, and maintaining documentation for audits and inspections.

Key Responsibilities:

• Database Management: Maintain an organized database of repair and maintenance records for all equipments, ensuring all documentation is up-to-date.
• Asset & Inventory Records: Track and maintain the equipment's spare parts inventory, ensuring availability for repairs.
• Vendor Coordination: Work with internal teams and external vendors to schedule and coordinate repair, maintenance, and inspection tasks.
• Schedule Monitoring: Oversee maintenance and calibration schedules, ensuring all preventive tasks are completed within established timelines.
• Process Improvement: Review and update maintenance procedures and checklists to improve efficiency in collaboration with the maintenance team.
• Data Analysis & Reporting: Compile and analyze maintenance data, generating reports to identify trends and opportunities for optimizing maintenance processes.
• Cross-functional Collaboration: Work with various teams to implement best practices for maintenance and ensure effective communication across departments.
  

Requirements:

• Possess a Degree in Engineering
• Possess at least 2 - 3 years’ Equipment Maintenance experiences
• Strong understanding of maintenance systems.
• Excellent organizational and communication skills.
• Ability to work with cross-functional teams and external vendors.
• Strong analytical skills and attention to detail.

Interested may sent your cv/resume to 84597671

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

MNC- Oil & Gas manufacturing company

• Working day: 5 days
• Location: Tuas, shuttle provided and transport allowance is given
• Overtime pay: 1.5/2 times
• Bonus, annual leave, medical claim etc.

Job Scope:

• Execute maintenance and repairs on manual lathes and CNC machines.
• Coordinate with external service providers to manage and supervise repairs.
• Carry out routine inspections and preventative maintenance on equipment to guarantee optimal functionality.
• Identify and resolve machinery problems and implement efficient solutions.
• Keep precise records of maintenance and repair activities.

Requirements

• At least 4 years of maintenance CNC Turning/ Milling/ Manual Lathe machines.

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Scope:

• Maintain assigned facilities to ensure they are in optimal condition.
• Supervise, plan, and implement all maintenance activities effectively.
• Conduct periodic inspections to identify and resolve potential issues.
• Diagnose problems and initiate timely corrective actions for maintenance issues.
• Plan and schedule routine maintenance, including managing shutdowns and turn-ons.
• Attend to maintenance requests and provide 24/7 emergency standby support.
• Issue work orders and provide status updates to the Facilities Support Coordinator.
• Undertake additional tasks assigned by the Company as appropriate.

Requirements:

• Minimum Diploma in Electrical, Mechanical, or Building Services Engineering, or equivalent.
• At least 1 year of relevant experience in mechanical & electrical installation and facility maintenance.
• Basic computer proficiency, including Word, Excel, and AutoCAD.
• Strong interpersonal skills with the ability to work independently and stay self-motivated.

• Work on delicate Radar System for preventive and corrective maintenance on sites.
• Execute maintenance tasks within the committed TAT, Ops availability and good quality
• Liaise with customer for maintenance activities
• Perform maintenance activities and ensure tasks are performed accordingly to requirements
• Monitor and activate replenishment of consumables at reorder level
• Schedule and perform calibration of tools and equipment
• Provide inputs and prepare documentation required to complete job
• Manage inventory of authority furnished spares
• Perform housekeeping
• Response to customers’ requirements

Requirements

• Diploma/ITC in Engineering in Electronics or equivalent
• Knowledge of EO/Radar maintenance experience would be advantageous
• Able to perform 24/7 stand by
• Physically fit and able to lift heavy loads
• Good team player and yet able to work independently.
• Valid Class 3 driving license would be advantageous.

Technician (Facilities Maintenance)

We are looking for an experienced FM Technician to manage the day-to-day operation & maintenance facilities services.

What will you do:

• Responsible for the maintenance of building facilities services like electrical, mechanical, and facilities equipment.
• Responsible for minor work repair and rectification to building and equipment and defect rectification works.
• Responsible for conducting regular preventive maintenance programs for building equipment and services.
• Work with contractors and vendors to carry out schedules and supervise work on-premises to ensure quality cost-effective repairs.
• To provision engineering services on weekends, public holidays, or extended hours (if required).
• To standby 24 hours on duty roster (will provide additional standby allowance)

Requirement

• Minimum 1-year experience in facilities management or a similar role.
• Minimum ITE Certificate / Diploma in Mechanical Engineering, Electrical Engineering, and Facilities Management.
• Hands-on experience in Mechanical (ACMV) and Electrical maintenance, troubleshooting, and repair work.
• Able to perform shift work.
• Experience in critical environments (e.g. Data Centre / Cleanroom / Semi-conductor plant) is an added advantage.
• Good communication and teamwork.
• Proficient in MS Excel & Word.
• Good understanding of facility M&E systems.

Other

Rotating Shift hours:

• Shift 1 (7am - 2pm)
• Shift 2 (2pm - 10pm)
• Shift 3 (10pm - 7am)

• Install and configure electrical network systems, ensuring all connections and components are correctly set up for optimal performance.
• Perform routine maintenance checks and repairs on electrical network infrastructure to prevent and address any issues that arise.
• Diagnose and resolve technical issues within the electrical network, minimizing downtime and service interruptions.
• Assist in upgrading electrical network systems and infrastructure, ensuring seamless integration and improved efficiency.
• Maintain accurate and detailed records of installations, maintenance activities, repairs, and system configurations.
• Provide support and assistance to users regarding the operation and maintenance of electrical network systems.
• Ensure all work is performed in compliance with safety standards and regulations, maintaining a safe work environment.
• Conduct regular testing and inspection of electrical network components to ensure they meet operational standards.
• Manage inventory of network components and spare parts, ensuring the availability of necessary materials for maintenance and repairs.
• Coordinate with vendors and service providers for the procurement of electrical network components and services, ensuring timely delivery and quality assurance.

Job Requirements:

• Nitec or Higher Nitec in Electrical Technology (Power & Control) or Integrated Mechanical & Electrical Design
• Willing to work outdoors and at heights

Wong Li Qi (Jolin)

R2096313

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Join a Leading Global Japanese Burger Brand!

Are you someone who enjoys hands-on work and thrives in a fast-paced environment? Are you passionate about keeping things running smoothly and ready to learn on the job? If so, we want YOU to join our team!

We're a globally recognized Japanese hamburger chain, known for our commitment to quality and innovation since 1972. As we expand rapidly, we are looking for a Mechanical & Electrical Executive who can ensure our outlets stay in top shape while supporting exciting new projects.

Your Role: What You’ll Be Doing

• To provide maintenance service of all equipment, buildings and facilities.
• Ensure that plant equipment and utilities are operating smoothly with good performance.
• Carry out planned maintenance and breakdown maintenance as instructed by Line Manager.
• Lead repairs, improvement projects implementation and liaise with vendors/contractors on scope of work.
• Provide emergency / unscheduled repairs of production equipment. Perform redesign and improvements to equipment for better capability, performance and ensure compliance to management of change process.
• Keep track of spare part and inventory usage to maintain spare part / inventory control.
• Lead Root Cause Failure Analysis and ensure action follow-up to prevent recurrence of breakdowns.
• To prepare Safety Risk Assessment (SRA), Work Instruction (WI) and Troubleshooting Know-How and other training materials when needed.
• To identify opportunity and drive continuous improvements in cost saving, quality and yield.
• Ensure compliance of company QHSE policy & local EHSS Legislations.
• Participate actively in Quality Health Safety & Environment (QHSE) activities (E.g. Trainings, Concern Reporting, Safety Risk Assessment (SRA) Review, correction of QHSE hazards and unsafe conditions).
• Plan and perform preventive maintenance on all production equipment according to company’s ISO, GMP, HACCP and QHSE requirements.
• Conduct housekeeping in work area and ensure compliance of site safety regulations to prevent accidents.
• Any other duties and responsibilities as assigned to you from time to time.
• Experience in a process plant maintenance.
• Experienced in Rotating equipment, centrifugal, pumps, agitators, compressors, statics, vessel, pressure, tanks, preventive, predictive, major repair & major overhaul.
• Advantages Skills/Certifications : Work At Height(WAH), Confined Space, Vibration, Welding, Forklift, SAP Plant Maintenance(PM) Module, spare parts inventory warehouse management & Risk assessment,