Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our company is a forward-thinking organization dedicated to leveraging technology to drive innovation and excellence. We are seeking a talented Software Development Engineer with additional responsibilities in network maintenance and app development using no-code platforms to join our dynamic team.

Job Description:

We are looking for a skilled Software Development Engineer who excels in coding and software development, with additional experience or interest in network maintenance and app development using no-code platforms. The ideal candidate will have a strong foundation in software engineering principles, experience in maintaining and optimizing network infrastructure, and proficiency in developing and publishing applications using no-code tools.

Software Development:

Design, develop, and maintain high-quality software applications.

Write clean, efficient, and well-documented code.

Troubleshoot, debug, and optimize software applications.

Collaborate with cross-functional teams to define, design, and ship new features.

Network Maintenance:

Monitor and maintain network performance to ensure reliability and efficiency.

Perform routine network maintenance, including updates and security patches.

Troubleshoot and resolve network issues, including hardware, software, and connectivity problems.

Implement and manage network security measures to protect company data.

App Development and Publishing:

Develop and deploy applications using no-code platforms such as AppSheet or similar tools.

Design user-friendly interfaces and ensure seamless functionality of no-code applications.

Publish and maintain applications, including handling updates and bug fixes.

Collaborate with stakeholders to gather requirements and translate them into effective app solutions.

Additional Responsibilities:

Stay current with industry trends and emerging technologies to continuously improve network, software, and app development practices.

Document technical processes, procedures, and best practices.

Qualifications:

Bachelor’s degree in Computer Science, Information Technology, or a related field.

Proven experience in software development with strong coding skill.

Hands-on experience with network maintenance, including knowledge of network protocols, hardware, and security.

Experience with app development and publishing using no-code platforms such as AppSheet.

Strong problem-solving skills and attention to detail.

Ability to work independently and as part of a team in a fast-paced environment.

Excellent communication skills and the ability to convey complex technical information clearly.

What We Offer:

Competitive salary and benefits package.

Opportunities for professional growth and development.

A collaborative and innovative work environment.

Flexible working arrangements [if applicable].

How to Apply:

Please send your resume and cover letter to [email protected] with the subject line "Software Development Engineer - [Your Name]."

We look forward to reviewing your application!

An equal opportunity employer and values diversity in the workplace. We encourage all qualified individuals to apply.

Responsibilities:

· Preventive maintenance on all the equipment in plant as per instruction

· Inspect and do corrective action on the equipment.

· Updating of preventive maintenance records like checklist history card

· Recording Jobs on log book day to day activities

· To minimize break down and down time of the equipment by problem

· identification

· Overhaul and service fans, blowers, different types of pumps/motors and other equipment

· Installation of new equipment and inspection for reliable operation

Requirements:

· ITE/Diploma in Mechanical or Electrical Engineering

· At least 2 years of maintenance experience in Process Plant

· Hands on skills required

Remuneration:

· Entitled Overtime / shift

· Working hours: Monday to Friday (8am – 5pm); Sat (8am – 12pm)/ Shift Work (Day: 8am – 8pm, Night :8pm – 8am)

· Company Transport / Transport Allowance ($120) if candidate possess own transport

Job Description

Responsibilities include but are not limited to:

- To perform this job successfully, an individual must be able to perform each duty satisfactorily.
- Installation and/or modification of chemical processing equipment as well as the repair and troubleshooting of auxiliary equipment associated with all chemical processing equipment and other facility equipment.
- Assist in promoting safety and organization in the maintenance team.
- Reviewing and updating of Work Instructions.
- Recommended preventative maintenance intervals based on repair data.
- Responsible for the execution of the Preventative Maintenance Program and the Monitoring and Measuring Devices Program.
- Specialize in Engineering improvement construction projects, ensuring that projects have a well-defined scope and schedule which has been reviewed by all affected parties.
- Ability to form an effective working relationship with external contractors, ensuring works performed are completed satisfactorily.
- Recommended spare parts inventory levels.
- Be able to write Purchase Requisitions for needed parts.
- Be able to perform all component rebuilds and calibrations.
- Understand and follow the process flow within chemical processing equipment.
- Understand and perform valid leak checks.
- Follow all work instructions and safety protocol.
- Organize and sort information using available computer software.
- Successfully complete all assigned training.

- Ability to wear a full face tight fitting respirator and a fully encapsulated (Level A) ER suit, Self Contained Breathing Apparatus (SCBA), or any other tight-fitting and/or supplied air respirators (SAR)

Required Qualifications And Competencies

Required Qualifications:
- Diploma in Mechanical, Electrical and Electronic or Mechatronic Engineering.
- 3+ years Industrial Maintenance experience, preferably in chemical industry or industry related to fluids systems Gas (Pressure) system component theory and operation
- Fitness for duty, including but not limited to: ability to lift loads and climb ladders
- Able to read and construct from a P&ID or Engineering drawing
- Basic electronic, carpentry, plumbing, PLC and/or electrical skills
- General Maintenance skills
- Tube bending skills
- Effective communication skills

Preferred Qualifications:
Gas (Pressure) system component theory and operation
Vacuum system component theory and operation

Location: Nearest MRT @Tanah Merah

Working hours: 5 day work week, 5:30am to 3:30pm (Mon) / 5:30am to 2:30pm (Tue, Thu & Fri) / 5:30am to 9:45am (Wed & Sat only)

Salary: $1600 - $1900 with monthly laundry allowance

Job scope:

• Handle the servicing and repair of malfunctioning equipment and buggies.
• Perform preventive maintenance on all equipment.
• Inspect, diagnose, and repair mechanical issues in diesel-powered equipment
• Keep detailed records of equipment maintenance.

Requirements:

• Minimum NITEC in Mechanical Engineering or equivalent with 1-2 years of relevant experience
• Must be prepared to work long hours during weekends and public holidays when required

☎ WhatsApp 8949 2590 to apply https://wa.me/6589492590 now and quote 'Technician'

Jacqueline Neo (R1104548)
The HR Ecology Pte Ltd (13C6391)

Job Info:

• Salary: Basic up to $2800 + AWS + VB
• Working Hour: Monday - Friday (7:50am - 4:55pm)
• Location: Tuas Link
• 1-year-contract (Renewable & Extendable)

Job Scope:

• Collaborate with the team to maintain mechanical and electrical installations and equipment
• Assist in the installation, operation, and maintenance of the company's plant machinery, building, and associated facilities
• Conduct inspections and servicing of the company's mechanical and electrical systems, building facilities, air-conditioning units, machinery, and equipment
• Address user requests and complaints, performing minor repairs as needed
• Coordinate with and assist external contractors during major repair or installation projects

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

THE OPPORTUNITY

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on The Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.
• Our Company is committed to provide patients and customers with a reliable supply of high-quality, safe and effective medicines and vaccines. Our global supply strategy relies on manufacturing capabilities and expertise to achieve this mission. Singapore is one of the key strategic manufacturing sites for our Company and patients. The local site operates multi-product facilities that manufactures active pharmaceutical ingredients, oral solid dosage, inhalation and sterile drug products.
• Looking for a change? The following presents an opportunity to work in the Packaging team.

Our Engineers support internal and external manufacturing operations remain operational, continuously improve and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

In this role, you will:

• Act as subject matter expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and also ensure that all relevant engineering CAPA are completed within agreed timeline.
• Lead and manage change control on project activities or act as technical advisor for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Assist in overseeing testing, commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Familiar with current applicable our standard & external standard for clean room/building environment and HVAC. When required, will also be familiar with other standards to provide full end to end support.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and develop Business and GMP processes, formalized them into site procedures required for startup and commercial launch.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today

Roles & Responsibilities

Job Description & Requirements

Good safety and supervisory attitude. Good levels of written and spoken communication in English language.

Clear understanding of personnel behavioural and team issues.

Appropriate standard of supervisory, technical, and professional knowledge as defined by competences.

Practical familiarity with standard 'Office' software package. Operation and use of Internet and electronic mail system.

Familiarity with Maintenance Management System packages AMOS/Maximo etc.

As Supervisor will exhibit good, supervisory and safety behaviours and will specifically ensure that all aspects of Engine Room operation and maintenance are carried out safely, through careful delegation and control of responsibilities.

As Supervisor is specifically responsible for the operation and maintenance of Engine Room equipment and Process utility systems controlled by the Engine Room and also for the guidance and familiarisation of those under his immediate supervision. Mechanical Technicians, Visitors, Vendor Technicians, and sub contractors

Typical Responsibilities & Standards

Engine Room Equipment and Systems and Utilities Operation and Maintenance

Prepare Engine Room and Utility Systems for start-up.

Start and Monitor Engine Room and Utility Systems.

Prepare and Shutdown Engine Room and Utility Systems.

Isolate and reinstate Engine Room and Utility Systems for Maintenance.

Perform Maintenance activities (For UMS Units)

Perform scheduled and unplanned maintenance safely and effectively under PTW Risk Assessment and Management System procedures.

Ensure work is correctly and accurately identified, recorded and communicated.

Roles & Responsibilities

Job Description & Requirements

Job Summary

Good safety and supervisory attitude. Good levels of written and spoken communication in English language.

Clear understanding of personnel behavioural and team issues.

Appropriate standard of supervisory, technical, and professional knowledge as defined by competences.

Practical familiarity with standard 'Office' software package. Operation and use of Internet and electronic mail system. Familiarity with Maintenance Management System packages AMOS/Maximo etc.

As Supervisor will exhibit good, supervisory and safety behaviours and will specifically ensure that all aspects of Engine Room operation and maintenance are carried out safely, through careful delegation and control of responsibilities.

As Supervisor is specifically responsible for the operation and maintenance of Engine Room equipment and Process utility systems controlled by the Engine Room and also for the guidance and familiarisation of those under his immediate supervision. Mechanical Technicians, Visitors, Vendor Technicians, and sub contractors

Typical Responsibilities & Standards

Engine Room Equipment and Systems and Utilities Operation and Maintenance

Prepare Engine Room and Utility Systems for start-up.

Start and Monitor Engine Room and Utility Systems.

Prepare and Shutdown Engine Room and Utility Systems.

Isolate and reinstate Engine Room and Utility Systems for Maintenance.

Perform Maintenance activities (For UMS Units)

Perform scheduled and unplanned maintenance safely and effectively under PTW Risk Assessment and Management System procedures.

Ensure work is correctly and accurately identified, recorded and communicated.

Roles & Responsibilities

Job Description & Requirements

Job Summary

Good safety and supervisory attitude. Good levels of written and spoken communication in English language.

Clear understanding of personnel behavioural and team issues.

Appropriate standard of supervisory, technical, and professional knowledge as defined by competences.

Practical familiarity with standard 'Office' software package. Operation and use of Internet and electronic mail system. Familiarity with Maintenance Management System packages AMOS/Maximo etc.

As Supervisor will exhibit good, supervisory and safety behaviours and will specifically ensure that all aspects of Engine Room operation and maintenance are carried out safely, through careful delegation and control of responsibilities.

As Supervisor is specifically responsible for the operation and maintenance of Engine Room equipment and Process utility systems controlled by the Engine Room and also for the guidance and familiarisation of those under his immediate supervision. Mechanical Technicians, Visitors, Vendor Technicians, and sub contractors

Typical Responsibilities & Standards

Engine Room Equipment and Systems and Utilities Operation and Maintenance

Prepare Engine Room and Utility Systems for start-up.

Start and Monitor Engine Room and Utility Systems.

Prepare and Shutdown Engine Room and Utility Systems.

Isolate and reinstate Engine Room and Utility Systems for Maintenance.

Perform Maintenance activities (For UMS Units)

Perform scheduled and unplanned maintenance safely and effectively under PTW Risk Assessment and Management System procedures.

Ensure work is correctly and accurately identified, recorded and communicated.

Job Description:

• Reviews tags (work requests) for quality and priority (gatekeeping
• Plans & prepares WO's (scope, tasks, resources, materials, tools).
• Manages task lists
• Requests materials in line with the inventory and supply work processes.
• Manages tools for maintenance execution.
• Schedules WO's (considering downtime, part- and services availability).
• Conducts the Spare Part Coordinator activities and execution of the brewery in case of Brewery does not have a Spare Part Coordinator.
• Plans/prepares and schedules WO's in such a way they can safely be executed on time in full (OTIF).
• Plans/prepares and schedules legal related maintenance tasks in such a way they can safely be executed OTIF.

Requirements:

1. 2-5 year experience in maintenance or operations.
2. Affinity with planning & scheduling; ability to effectively plan ahead.

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the Engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s mechanical equipment

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Perform daily inspection on equipment.

· Analyze breakdowns, diagnose faults and execute the required rectification process. ]

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Mechanical or Electrical

· Minimum 8 years’ experience in Waste to Energy Plant

· Boiler Attendant / Steam Engineer Certification will be a plus

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 5.5 days a week and if required, including public holidays and weekends.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

· Process Plant WSH Supervisor Certificate and above.

· Confined Space Supervisor and above.

· Work At Height Supervisor and above.

Job Responsibilities:

Ø Complete maintenance jobs in accordance with the highest standards of efficiency.

Ø Must have rotating equipment service maintenance experience in process industry

Ø Review and assign work to maintenance employees

Ø Maintain schedule compliance and priority

Ø Supply reporting to the maintenance coordinator on repair jobs including consumption of tools, materials, man hours and skills

Ø Develop and execute training plan for maintenance workers

Ø Monitor and manage the maintenance budget, ensuring cost-effective operations and adherence to financial guidelines

Requirements:

Ø Promote communication as well as good relations between the production and the maintenance departments

Ø Must have possession of relevant technical knowledge

Ø Must possess clerical ability

Ø Candidate must have at least a NTC or Diploma degree.

Ø Minimum 5+ years of experience in related operations

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• 5 days, Jurong West, Transport provided
• $2400 - $2800, allowances
• AWS, performance bonus, medical/dental benefits
• Good leadership skills
• Warehouse environment

Description

• Supervise maintenance and production workers, as well as contract workers
• Troubleshoot production machines and electrical systems in the company
• Operate production machine

Requirements:

• Minimum ITE in Electrical and Mechanical Engineering
• Minimum 1-3 years experience in electrical and mechanical
• A hands-on person
• Independent, fast learner with a positive attitude and able to multi-task

Interested applicants, please send your applicants to [email protected]

Job Description

Job Responsibilities:

• Carry out regular preventive maintenance, troubleshoot & repair factory equipment
• Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issue
• Perform routine checking, housekeeping and maintenance of tools and kits for equipment
• Tracks and compiles report on equipment performance in assigned shift and area
• Recommends and implements alternative source for spare, modification if equipment or improvement in procedure to save cost
• Keep work area clean and tidy
• Other ad-hoc duties assigned

Job Requirements:

• Candidate must possess at least a NTC Electronics/Diploma in Electrical Engineering
• At least 2 year(s) of working experience in the related field is required for this position

Assist and Support the site supervisor and construction manager in all aspects of works, including:

o Reviewing electrical and signalling system drawings and specifications

o Planning and scheduling work

o Assigning work to sub-contractors and overseeing their work.

Major work is power/control/Signal/FO cabling, equipment installation, testing and commissioning associated with LRT project.

o Ensuring compliance with standards, codes, and safety regulations.

o Troubleshooting electrical problems.

o Developing reports and records

o Maintaining accurate records and documentation.

· Perform routine tasks, such as:

o Conducting pre-task Toolbox Meeting/ Safety briefings.

o Issuing work permits.

o Arranging LOTO

o Assisting QA/QC works

o Assisting testing and commissioning works

o Arranging materials and equipment.

o Arranging special tools etc

· Communicating effectively with the electrical site supervisor, project manager, other subcontractors, and inspectors.

· Communicating with various stake holders e.g. other contractors (System Wide Contractors), SBST, LTA.

· Any other ad-hoc works assigned by project manager and construction manager.

Requirements

· Diploma or ITE in Electrical and Electronics

1. Person-in-charge of an in-house trailer repair/ maintenance workshop
2. Guide supervisor and staff on the allocation of work and deployment of staff
3. Verify repair quotations from vendors on prime movers and company’s vehicles
4. Conduct inspections on vendors sites to ensure repairs works are completed timely and meet our satisfaction expectations
5. Ensure staff is equipped with relevant skills, knowledge and certifications to perform necessary work.
6. Ensure timely completion of work as per target set by management.
7. Work closely with Transport department to ensure trailers and prime movers are in time for LTA inspection
8. Work closely with Procurement department to control inventory availability and cost.
9. Prepare statistics and reports to review performance and make recommendations on operational and procedural enhancement / improvement
10. Attend to drivers’ feedback / call and recommend next course of action
11. Ensure supply of safety kits/ PPE to staff and ensure adherence to safety regulations and safe work practices
12. Ensure availability of tools, material, spare parts and proper upkeep of inventory and assets
13. Ensure cleanliness of work premises and ensure good housekeeping for a cleaner workplace.
14. Ensure quality through supervision of work and stage inspections
15. Verification of timely and proper opening and closing of job cards
16. Adhere to statutory/ company’s safety and health policies, procedures and regulations
17. Assist HOD and Management in any work assigned
18. Any other duties and responsibilities assigned from time to time

Requirements:

1. Diploma holder in mechanical engineering or related field
2. Possess Class 3 driving licence.
3. At least 5 years of technical experience in automotive industry, preferably in heavy/ commercial vehicles
4. Strong technical competence and experience in prime mover and trailer
5. Good interpersonal skills and goal oriented
6. Able to handle stress and work within a tight schedule

Others Information:

1. Mon – Fri (8.30am – 5.30pm); Sat (8.30am – 12.30pm)
2. Daily meal subsidy
3. Medical, dental & insurance benefits
4. Company Transport: 2 ways from Jurong East

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Reporting to the Manager of Engineering, the Technician will provide maintenance and engineering support in the manufacturing plant.

Our Manufacturing Operations teams are the people that make our products. We work in the manufacturing plants with a “Safety First, Quality Always” mindset striving for continuous improvement. We work in the local plant connected to our global manufacturing network to ensure the highest quality of raw materials, intermediates, and finished products.

WHAT YOU WILL DO

Your responsibilities will include but are not limited to:

• Performs scheduled calibrations and preventive maintenance on all types of industrial instruments and electrical devices and mechanical equipment.
• Executes work request from process plants for equipment, instruments and electrical breakdown.
• Operates and maintenance of utilities and facilities.
• Performs modifications, fabrication, fittings, and installation for minor projects.
• Performs equipment/system testing, commissioning and/or qualification (IQ, OQ, PQ).
• Performs basic trouble shooting of the PLC, BMS, EMS and FAs system.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Min NITEC Diploma in Mechanical, Mechatronics, Electrical or instrumentation and control engineering
• Min 2 years' experience in maintenance field preferably from oil and gas or semiconductor industries
• PUB electrician license will be an advantage

This is a career conversion program under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with more than 2 years working experience
• Open to two years contract
• 12 hours rotating shift (day/night) including Sat/Sun. Shift allowance will be provided
• Work location Tuas (shuttle bus provided)

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Pharmaceutical Manufacturing.
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated to providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Responsibilities:

• Responsible for machine operation, breakdowns, troubleshooting, preventive maintenance, equipment servicing, and routine daily servicing.
• Conduct daily for routine maintenance works that execute by engineering engineer or manager.
• Daily update and record machine checklist for machinery and utility equipment.
• Conduct weekly spare parts checking and update to superior.
• Daily cleaning of workshop area.
• Weekly assist to conduct air conditioning & cooling tower cleaning and checking.
• Weekly conduct cleanroom machine and automation equipment greasing and cleaning.

Requirements:

• Preferably at least NITEC in Electrical / Mechanical / Mechatronic Engineering/ Facility Management or related course
• Minimum 1-3 years relevant working experience in building/ facilities servicing and maintenance

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Tan Zhi Ning

Registration Number: R23116771

EA License No: 18C9027

Job Description & Requirements

• Responsible for planning and managing food preparation in restaurant/cloud kitchens.
• Develop new menu options based on seasonal changes and customer demand.
• Assist with the preparation and planning of meal designs.
• Ensure that kitchen activities operate in a timely manner.
• Interaction with the customers and resolving the problems and concerns personally.
• Monitor and record inventory, and if necessary, order new supplies.
• Provide support to junior kitchen employees with various tasks including line cooking, food preparation, and dish plating.
• Train the new kitchen employees to meet kitchen standards.
• Create schedules for kitchen employees and evaluate their performance.
• Adhere to and implement sanitation of kitchen utensils and regulations and safety regulations.

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368