Responsibilities:

• Provide technical support in process engineering to facilitate production operations.
• Advice, support and carry out machine acceptance tests, qualification, and validation of production processes and equipment.
• Lead or participate in the investigation, troubleshooting, and root cause analysis for various production events and equipment failures; ensure that all relevant CAPAs are completed timely.
• Ensure adequate preventive & predictive maintenance to reduce equipment failures while maintaining quality and productivity; ensure adequate spare part inventory to meet the critical maintenance requirement.
• Work with and supervise vendors/contractors to ensure installation, repairs, or maintenance works are carried out timely and with minimal disruption to operations.
• Ensure compliance with GMP, regulatory requirements, ISO standards, EHS standards, and other relevant policies/standards.
• Ensure workplace safety and be responsible for notifying Management in a timely manner of EHS/GMP deficiencies.
• Support plant automation, Industry 4.0, and digital manufacturing initiatives.
• Any other duties and responsibilities as assigned by the Manager.

Requirements:

• Tertiary education in Electrical/Mechanical Engineering
• Minimum 3 years of related experience as a manufacturing process engineer in a Cosmetic, Food, or Pharmaceutical Manufacturing environment
• Well versed in GMP
• Good experience in automation and Industry 4.0 plant will be useful for work.
• Good communication and interpersonal skills
• Systematic and able to work under pressure
• Excellent analytical and good engineering problem-solving skills, workload resource planning, and prioritization skills
• An independent self-starter and a strong team player

- NITEC / Higher NITEC / Diploma in Engineering (PLC programming knowledge /experience a plus point)

- Willing to be hand-on in Maintenance / Engineering elated work in factory environment

- Suggest and implement continuous improvement in any area such as quality, cost and safety

- Will be involved in all machinery / equipment maintenance, repair, testing, calibration, documentation etc.

Responsibilities

• Using Solidworks to produce mechanical design, simulation, and various engineering solutions
• Design machine automation, and produce the necessary drawing with detailed measurements and specifications for fabrication
• Produce, maintain and update 3D/ 2D renderings, and bill of material (BOM) list, with detailed descriptions
• Review and evaluate machine designs/ design solutions vis-à-vis requirement/ specs
• Produce detailed parts drawing & BOM for fabrication
• Work alongside fabricator and provide support in production/ design modifications
• Perform/ conduct/ lead engineering meetings/ presentations/ discussions
• Select suitable components/ parts for various designs, based on sound engineering understanding and knowledge
• Actively coordinate between customer, vendors and production to deliver product(s) as per customer’s requirements and on schedule
• Liaise with vendor for technical information and specification
• Produce operational/ instructions manual for end users

Skills

• The ability to grasp and solve complex and dynamic problems
• The capacity to explain, apply and innovate engineering solutions
• Effective communication skills both technical and in layman’s terms
• The ability to work in team settings and be an effective team member, and also to work independently
• Leadership and management qualities
• Good organizational and administrative skills
• Patience and resilience
• Passionate and willing to go the extra mile

Qualifications

• Solid command of SolidWorks (3D) software
• At least 2 years relevant experience and knowledge in equipment/ automation design

Benefits:

• Basic Salary up to $2,800 with yearly increment based on performance.
• Company’s medical insurance coverage
• 5.5 days (Monday to Friday) – 8.30am to 5.45pm / (Saturday) – 8.30am to 12.30pm

Job Description:

This is a full time role for a Maintenance Technician (Utilities & Facilities) located in Senoko Drive. Our client is creating a new and sustainable way of supplying fresh fruit and vegetables to Singapore. The role involves supporting the QA Manager by managing and maintaining facilities in a cold chain supply environment. This includes handling the maintenance and repair of air-conditioning and mechanical ventilation (ACMV) systems, building infrastructure, electrical wiring, lighting, fire safety systems, and other essential components within GMP and GHP standards. The technician plans and performs daily maintenance, troubleshooting, and inspections for facilities and fire safety. They also coordinate with departments to address maintenance priorities, supervise contractors on-site to ensure compliance with regulatory and safety requirements, assist with machine and PLC troubleshooting, and handle additional tasks as needed. Record-keeping and report preparation are also key aspects of the role.

Qualifications:

• NITEC/ITC/Diploma in electrical, mechatronics, civil industrial or related professional certificate on related skill.
• At least 3 year(s) of working experience in the food & beverage or manufacturing industry is required for this position.
• Preferred hands on working experience in utilities and facilities maintenance.

Job Title

Production Technician

Job Description & Requirements

• Participate in daily productivity activities and work health safety
• Perform installation/maintanence/repair of machinery and equipment
• Carrying out routine inspection and servicing of machinery and equipment
• Assists in the company's maintenance schedule
• Update maintenance report & calibration report
• Maintain Spare parts and upkeep of Production floor
• Read and write machine manuals in Chinese and English
• Perform ad-hoc duties as assigned

Requirements

• Minimum SPM / TVET Programs / ITE Engineering or equivilent in Precisison/Electrical/Mechanical Engineering
• Minimum 2 year of machine maintenance works
• Able to work independently
• Self motivate, proactiveness and objectives driven
• Work place is in Senoko area
• 5.5 days work week

****NO AGENTS PLEASE***

Requirements

• at least 3 years of working experience, project management environment
• Minimum "O" Levels education
• Willing to work overtime
• Islandwide locations
• Wrok in weekends
• Day/night shift (eg.3am-12pm)
• 24/7 respond to emergency
• Good communication skills, fluency in any dialects will be an advantage
• Class 3 license would be a plus
• Able to work under pressure
• Committed and service-oriented team player

Responsibilites.

• To respond on emergency (standby 24/7 calls ) attend project sites while on duty and off duty.
• To communicate assigned cleaning duties to the cleaning team.
• To ensure teams adhere to safety measures during cleaning operations.
• To supervise, coordinate and manage work activities of cleaning staff.
• To assist the cleaning staff in resolving working issues with clients.
• To implement operation plans to improve work processes and service quality.
• To attend site meetings with operation team.
• To assist in coordinating and liaising with clients at project sites.
• To respond to emergency calls while on duty and off duty (standby 24/7)
• To perform other ad hoc as assigned.

Requirements

• at least 3 years of working experience, project management environment
• Minimum "O" Levels education
• Willing to work overtime
• Islandwide locations
• Wrok in weekends
• Day/night shift (eg.3am-12pm)
• 24/7 respond to emergency
• Good communication skills, fluency in any dialects will be an advantage
• Class 3 license would be a plus
• Able to work under pressure
• Committed and service-oriented team player

Responsibilites.

• To respond on emergency (standby 24/7 calls ) attend project sites while on duty and off duty.
• To communicate assigned cleaning duties to the cleaning team.
• To ensure teams adhere to safety measures during cleaning operations.
• To supervise, coordinate and manage work activities of cleaning staff.
• To assist the cleaning staff in resolving working issues with clients.
• To implement operation plans to improve work processes and service quality.
• To attend site meetings with operation team.
• To assist in coordinating and liaising with clients at project sites.
• To respond to emergency calls while on duty and off duty (standby 24/7)
• To perform other ad hoc as assigned.

Requirements

• at least 3 years of working experience, project management environment
• Minimum "O" Levels education
• Willing to work overtime
• Islandwide locations
• Wrok in weekends
• Day/night shift (eg.3am-12pm)
• 24/7 respond to emergency
• Good communication skills, fluency in any dialects will be an advantage
• Class 3 license would be a plus
• Able to work under pressure
• Committed and service-oriented team player

Responsibilites.

• To respond on emergency (standby 24/7 calls ) attend project sites while on duty and off duty.
• To communicate assigned cleaning duties to the cleaning team.
• To ensure teams adhere to safety measures during cleaning operations.
• To supervise, coordinate and manage work activities of cleaning staff.
• To assist the cleaning staff in resolving working issues with clients.
• To implement operation plans to improve work processes and service quality.
• To attend site meetings with operation team.
• To assist in coordinating and liaising with clients at project sites.
• To respond to emergency calls while on duty and off duty (standby 24/7)
• To perform other ad hoc as assigned.

Requirements

• at least 3 years of working experience, project management environment
• Minimum "O" Levels education
• Willing to work overtime
• Islandwide locations
• Wrok in weekends
• Day/night shift (eg.3am-12pm)
• 24/7 respond to emergency
• Good communication skills, fluency in any dialects will be an advantage
• Class 3 license would be a plus
• Able to work under pressure
• Committed and service-oriented team player

Responsibilites.

• To respond on emergency (standby 24/7 calls ) attend project sites while on duty and off duty.
• To communicate assigned cleaning duties to the cleaning team.
• To ensure teams adhere to safety measures during cleaning operations.
• To supervise, coordinate and manage work activities of cleaning staff.
• To assist the cleaning staff in resolving working issues with clients.
• To implement operation plans to improve work processes and service quality.
• To attend site meetings with operation team.
• To assist in coordinating and liaising with clients at project sites.
• To respond to emergency calls while on duty and off duty (standby 24/7)
• To perform other ad hoc as assigned.

Job Description & Requirements

Assist & Report to the QA Manager with hands-on operational facilities management and maintenance works in the supply cold chain environment.

Responsibility

• Responsible for Air-con Maintenance & Mechanical Ventilation (ACMV), repair work on building & infrastructure, building services management including wiring, doors, lighting, painting, office, fire protection system and related work in a GMP and GHP environment.
• Schedule Planning and manage hands on daily facilities work, troubleshooting and repair.
• Perform Daily Facility and Fire Safety Inspection.
• Liaising with all departments concerning maintenance matters, prioritizing and action in a timely manner on planned and unplanned maintenance.
• Supervising servicing / suppliers/ contractors who are on site, to ensure that all maintenance work is carried out in accordance with the contract, government regulatory requirements and Food Safety policy.
• To assist on machine troubleshooting, PLC troubleshooting and repair as and when required.
• To perform other ad-hoc duties as and when assigned by superior.
• Record all works, ad-hoc projects and report writing.

Requirement

• NITEC/ITC/Diploma in electrical, mechatronics, civil industrial or related professional certificate on related skill.
• At least 3 year(s) of working experience in the food & beverage or manufacturing industry is required for this position.
• Preferred hands on working experience in utilities and facilities maintenance.

Information:

Working Hours : 8am~8pm / 8pm~8am (Rotating Shift)

Shift Pattern : Work 4 Days, Rest 3 Days

Meal Allowance and Shift Allowance provided

Responsibilities:

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.
• Report to Manager in Engineering Department

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.
• PPE Requirements : Jumpsuit and Mask in Production Area

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Reporting to the Manager in the Engineering Department, the selected incumbent shall assist the Engineering team in the following tasks:

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.

Note:

Candidate MUST BE willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Job Summary

Regularly performs the full range and scope of maintenance and housekeeping services that include, but not limited to: the upkeep of buildings, grounds, fixtures, equipment, NEXCOM Hospitality Group (NHG) guest rooms, public spaces, etc. Assignments include simple painting, plumbing, carpentry,

electrical repairs, maintenance using various equipment, etc. Takes initiative to ensure all aspects of the facility are working correctly.

Duties & Responsibilities

• Performs work in at least two of the following trades in the maintenance and repair of buildings and related fixtures. Maintains work order log and follows up as required. Reports status to supervisor. Logs trouble calls with contractor, as appropriate.
• Plumbing: Makes basic plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, shut-off valves on washing machines and water supply which can be accomplished by removing, cleaning, resealing, replacing defective parts or units, installing water heaters, garbage disposals, faucets and sinks.
• Washer/Dryer repair: Performs routine maintenance on washers and dryers to include cleaning lint ducts and vents, replacing hoses and fittings as required, and referring more complex problems to supervisor for action.
• Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units as appropriate.
• Electrical: Recognizes and reports electrical problems making repairs as appropriate. Replaces fluorescent and incandescent ballasts, bulbs and tubes.
• Carpentry: Measures, cuts and constructs or repairs wood or wood substitute items. Conducts basic carpentry repairs such as repairing or replacing screens; window and door frames; molding and trim; and repair and replacement of drywall or similar products.
• Painting: Preparation of areas and standard coating methods such as brushing, rolling and spraying and ensure surfaces are fully coated, protected and free from drips and runs.
• Responsible for a variety of semi-skilled and unskilled tasks involving standard methods related to the operation and maintenance of facilities.
• Work assignments (completed and in-progress) are spot-checked on a daily basis via documented inspection reports to assure that work practices, techniques, records, and other functions are technically accurate and in compliance with instructions. Recurring assignments (e.g. follow-up on maintenance requests reported by guests, housekeeping, or front desk) are carried out independently without specific instructions.
• Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, commonly used chemicals and basic safe work practices is required.
• Complete all required safety/security training.
• Required to do considerable standing, bending, walking, pushing, pulling, and climbing. Must have ability to perform moderately strenuous physical labor as unassisted lifting, moving, and carrying of supplies and equipment weighing up to 45 pounds (100 pounds assisted) is required. Must be able to climb/descend stairs and ladders, stoop, bend, kneel and work in uncomfortable positions.
• Work involves normal risks or discomforts associated with property operations, facility management, and/or mechanical systems. Work is performed both indoors and outdoors with potential exposure to extreme weather or temperature conditions. Occasional exposure to dusty or dirty conditions exists when visiting rooms or facilities undergoing repair, maintenance, or renovation. Personal Protective Equipment (PPE) is provided.
• Incumbent is expected to perform daily work on own initiative and carry out assignments in accordance with DOD and Navy regulations. Situations involving unfamiliar problems not covered by instructions are referred to the supervisor for resolution.
• Typically employee uses routine instructions and work methods that are common to the trade and may be general in nature. Where available the incumbent will rely on blueprints, manufacturer's instructions, manuals, and maintenance specifications.
• May be required to possess a valid state driver license, as travel to other facilities may be required within the normal scope of duties. Applicants will be notified when this is a requirement for appointment.
• This position is subject to the possibility of workdays on weekends and holidays, as well as, rotating shifts, often consisting of other than normal duty hours. May be recalled to duty and/or required to work overtime, including on an emergency basis.
• Performs other related duties as assigned

Education & Qualifications

• Technical certification
• Minimum two years of experience with demonstrated skill in two areas (Carpentry, Plumbing, HVAC, Electrical, Painting).
• Knowledge in the applicable combination of trades sufficient to perform the duties of the position.
• Basic knowledge of trade practices sufficient to complete tasks using common skills.
• Familiarity with safe use of common hand and powered tools.
• Possession of, or ability to obtain a valid driver's license is preferred but not mandatory.

Required Documents

• A copy of highest education certificate.
• A copy of full transcripts of corresponding education used to support this application.

Conditions of Employment

• Satisfactorily complete and maintain clearance of a Local Agency Check (LAC).

Benefits

• Eligibility to accrue leave, be placed in a comprehensive employee group insurance program and enjoy a one-month annual wage supplement.

How To Apply

• Applicants must apply via MyCareersFuture for consideration.

Manager must be able to diagnose vehicle, do repair works, attend to customers and do some sales. Be able to speak/read chinese and english. Able to do stock taking and do ordering from suppliers. Working hours be monday to saturday 9 to 6.30pm. Facilitiate the smooth transition of workflow among work operations.

Job Description & Requirements

Responsibilities for operation technician

· Maintain operational logs all alerts and requests, recording and classifying all related messages

· You will Participate actively in each Majors Operation, supervising all the steps, preparation, coordination, execution, and reporting

· Responsible for all aspects of all equipment related to this process

· Analyzing, ranking and troubleshooting alerts and error conditions on the network

· Dependably, independently and reliably perform operation, monitoring and maintenance of wastewater treatment and brine solidification pilot plants

· Monitor plant processes to ensure control parameters are within desired ranges; monitor and review laboratory results and instrument readings to make adjustments as necessary

· Maintain and update records, forms, and reports in various automated systems, formats, and software for accuracy to ensure data integrity and adherence to manufacturer and internal controls, policies and practices

· Provide recommendations to assist in the development and implementation of procedures for improved pilot plant operations

· Collect samples for analysis and project reporting using prescribed methods and techniques

Key Responsibilities

· Ensure proper housekeeping and maintain cleanliness of the building premises

· Attend to all types of repairs and perform minor maintenance task, i.e., replace damage light bulb, replace filters, replace broken windows, repair doors, door locks

· Performs scheduled inspection to ensure the pest control process of the manufacturing facilities environment is effective

· To perform general cleaning and provide facility maintenance support

· Daily inspection of physical facilities and equipment to ensure

· Maintain records and data for tracking and analysis

· To conduct daily cleaning to all the production areas, which include warehouse, office

· Performs administrative tasks as assigned such as submission of incidence reports, updating of facilities, cleaning records, etc.

· To conduct routine facility inspection, maintenance and building touch up

· Assisting in conscientiously helping the Company to ensure minimum wastage (materials and/or change/replacement of parts etc)

· Ensuring compliance with all safety measures as per established best industrial practices and as instructed by your superiors (and/or other) to be strictly adhered to

· Any other job-related ad-hoc duties / projects as assigned by Management

Job Requirements

· At least 2 years relevant working experience with similar capacity, preferably in food manufacturing production-related field

· Team player with proven performance in problem-solving and a track record of being able to work independently and multi-task in a fast-paced environment

· Able to work on normal and shift work

· Good coordination and organisation skill

Qualifications

· NITEC / Diploma in Mechanical/ Electrical or equivalent

Carrry out preventive maintenance of mechanical and electrical doors system. Physical hand-on works including night works when MRT stations are closed. Able to read, understand and write servicing report. Able to understand and pass training course by client to carry out works on train tracks. A team player of 3 or 4 man working per job lead by Engineer or Supervisor to work safely and as per requirement.

Responsibilities:

· Repair of semiconductor equipment's electrical/ electronic parts.

· Generate incoming and outgoing test reports.

· Generate repair procedures and checklist.

· Maintain high repair quality and standard.

· On site support to assist customer in the installation of the repaired items.

Requirements:

· Diploma/Nitec or equivalent in Engineering (preferably electrical or electronics)

· Fresh graduates with a good attitude are welcome to apply

· Good hands-on skills

· Good analytical & problem-solving skills

· Good comprehension of engineering literature and specifications

· Strong passion and willingness to work hard to overcome engineering challenge

· Singaporean/PR

Bus Repair Mechanic

- Experienced bus mechanics (Must have 3-5 years)

- knowledge for repair Bus Yutong, Zhong Tong, Higer, King Long

No Agent

Call: 9238 2338 / 9688 6887

• Perform installation/maintanence/repair of machinery and equipment
• Carrying out routine inspection and servicing of machinery and equipment
• Assists in the company's maintenance schedule
• Update maintenance report & calibration report
• Maintain Spare parts and upkeep of Production floor
• Read and write machine manuals in Chinese and English
• Participate in productivity activities and work health safety
• Perform ad-hoc duties as assigned

Requirements

• ITE Engineering or equivilent & above in Mechatronics/Electrical/Mechanical Engineering
• Minimum 2 year of machine maintenance works
• Able to work independently
• Self motivate, proactiveness and objectives driven
• Work place is in Senoko area
• 5.5 days work week

*If you have the experiences, but do not have the necessary academic qualifications, write in with your resume to [email protected]*

Job Descriptions

• Perform installation/maintanence/repair of machinery and equipment
• Carrying out routine inspection and servicing of machinery and equipment
• Assists in the company's maintenance schedule
• Update maintenance report & calibration report
• Maintain Spare parts and upkeep of Production floor
• Read and write machine manuals in Chinese and English
• Participate in work health safety
• Perform ad-hoc duties as assigned

Requirements

• ITE Engineering or equivilent & above in Mechatronics/Electrical/Mechanical Engineering
• Minimum 2 year of machine maintenance works
• Able to work independently
• Self motivate, proactiveness and objectives driven
• Work place is in Senoko area
• 1 days work week [Can be any day from Monday to Saturday]

*If you have the experiences, but do not have the necessary academic qualifications, write in with your resume to [email protected]*