Job Description:

- Perform maintenance, repair, overhaul and servicing (Mechanical)

- Perform lubricant replacement, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, re-routing of harnesses, cabling repair and system testing (Electrical)

- Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine & STE etc.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

Job Requirements:

- NITEC/Higher NITEC in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Competent in use of hand tooling

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

Workshop Technician role reporting to Operations Manager performs critical Testing, Repair and Troubleshooting of Flight Control Actuations ensuring that final products are safe and meet customer expectations while keeping the repair process as effective and cost-efficient as possible.

Responsibilities include:

· Test, Repair and Troubleshooting Tasks

· Shop Process Control and Monitoring

· Safety Management and Human Factors

· Documentation and Data Input

· Preventive Maintenance of Equipment

· Continuous Improvement Initiatives

Experienced level position with candidates undergoing extensive training and qualifications. Diploma or NITEC in an Aerospace/Aviation science or engineering discipline. Aviation background and experience preferred, aviation regulatory papers a plus.

• Analytical skills – need to be able to spot problems quickly and find the underlying causes so changes can be made
• Critical thinking – once problems are identified, solutions and improvements must be found. This might involve thinking about a process, procedure or problem in a completely new way.
• Attention to detail – as the people responsible for the technical work performed, as well as the people who notice and report on problems, every detail must be noticed and acted upon when necessary
• Numerical skills – statistical analysis and data analysis
• Communications skills – strong written and verbal communication skills are key. Must be able to relay potentially complex ideas to a wide range of audiences – both in personal consultations but also through company SOPs and technical documentation
• Team working skills – working as part of the operations team, and in close coordination with other teams throughout the facility (as well as potential for interaction with suppliers and customers)

Company Description

Cogent Holdings Pte Ltd is a subsidiary of Cosco Shipping International (Singapore) Co., Ltd and has a wide range of clientele ranging from local SMEs to multinational companies. Cogent owns one of Singapore's largest one-stop integrated logistics hub, Cogent 1.Logistics Hub. It offers warehousing, freight forwarding, container and ISO tank depot, automotive logistics and transportation services in Singapore. It also operates warehousing and container depot businesses in Malaysia.

Role Description

This is a full-time, on-site role for a Senior Maintenance and Repair Executive at Cogent Container Depot Pte Ltd. The incumbent will be responsible for overseeing maintenance and repair (M&R) activities for the container depot while ensuring compliance with company standards, operational excellence, and customer satisfaction. Key responsibilities include managing M&R operations, supervising teams, maintaining cost control, and building strong stakeholder relationships.

1. Oversee the repair and maintenance of containers in line with company policies and strategies.

2. Ensure the commissioning and operational maintenance of the container fleet to meet customer demands.

3. Direct full-spectrum operations, including container surveys, estimations, repairs, and release processes.

4. Maintain high service quality and compliance with safety and operational standards.

5. Lead and manage the M&R team, setting and monitoring individual and team goals to improve performance.

6. Conduct regular depot audits to ensure adherence to processes and standards.

7. Manage the M&R budget and identify opportunities for cost reduction.

8. Negotiate with partners to agree on rates and improve operational processes.

9. Build and maintain strong relationships with customers, transporters, and shipping companies.

Requirement

1. Degree or Diploma qualifications in Logistics, Supply Chain Management, or related field

2. Minimum 5 years in container depot operations or related fields

3. Technical knowledge of container equipment.

4. Possession of an IICL certification is advantageous.

5. Strong team management and leadership skills.

Others:

1. Saturday half day working requirements

2. Subsidized lunch

3. Medical, dental & insurance benefits

4., Company Transport: 2 ways from Jurong East

Copier Technician

5.5 alternate Saturday

Monday - Friday :8.00am -5:00pm

Saturday 8.00am - 1.00pm

$1800-$3000 ( Depends on experience)

Geylang

Job Role (Responsibilities & Duties)

-Setup and commissioning of copiers and software solutions at customer's premises

-Provide technical support, and attend to monthly servicing and maintenance of copiers and printers

-Troubleshooting and replacement of spare parts and consumables

-Attend to ad-hoc service and repair calls

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Ensure the team adhere to Quality and Safety standards. Conduct periodically quality walks, safety walks and safety inspections. Coach team on safety behaviour, and be a role model.
• Assist the manager to create development opportunities.
• Coordinate subcontractor works and audit their work quality standards.
• Carry out site survey and standardisation repair project for lifts and escalators according to customers’ requests, industrial trend and code of practice requirement.
• Coordinate with factory and/ or suppliers and contractors to implement new systems or repair existing ones on Schindler equipment, per customers’ requests.
• Support in the preparation of reporting for internal or external usage.
• Carry out ad-hoc assignments, such as, conduct training, attend customer meetings, etc.
• Liaise with customers on their complaints and take the lead in follow up actions.
• Coordinate, monitor, execute actions on operation problems and lift technical problems.

• Minimum 2 years of technical experience in lifts or related Technical Service industry.
• Good spoken and written English
• MS Excel, Word, Powerpoint, SAP experience an advantage but not necessary.

Estimating:

• Prepare detailed and accurate estimates, along with the final bid documents (tenders), for various types of vessels.
• Conduct vessel inspections when necessary and engage with Owners’ Representatives to discuss technical and commercial details.

Invoicing:

• Monitor vessels’ drydocking and repair activities in the yard.
• Discuss technical and commercial aspects with Owners’ Representatives, negotiate and finalize variation orders, and manage invoicing.

Requirements:

• Diploma or equivalent in Marine, Mechanical, or Electrical Engineering, or relevant training in a reputable shipyard or offshore industry.
• Assertive and courteous personality, with strong organizational and negotiation abilities.
• Proficiency in English, both written and spoken, is essential.
• Technical expertise and prior experience in a similar role within the shipping or offshore industry, or sea-going experience.
• Willingness to travel overseas occasionally, including visits to shipyards for vessel inspections and project discussions.

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

ASEANet Manpower Consulting Is a boutique search firm and our founder and consultants have years of experience from various industry and businesses background. Our expertise include Executive Search, Permanent Placement , Career Transition and Talent Development.

We connect outstanding people with the best Innovative Companies.

ASEANet Manpower Consulting offer different specialisms including:

Accounting & Finance, Admin & Secretarial, Banking, Construction, Engineering, Events, Education, Financial, F&B , Healthcare & Medical. , Supply Chain & Logistics, Manufacturing, Retail, and Information Technologies. With our professional recruitment service, we can assist you with your desired career path.

Contact us for a FREE Consultation.

We believe that YOUR SUCCESS - IS OUR MISSION.

Our client are looking for next team members to join their growing team:

Job Description:

•Maintain housekeeping of workstations and daily upkeep of equipment

•Perform cleaning, masking, blasting, painting and oven stoving of aircraftparts

•Maintain housekeeping of workstations and daily upkeep of equipment

•Perform fittng, bonding, dressing riveting and cleaning of aircraft engine components

Requirements:

•Minimum Nitec / Diploma preferably in Engineering or relevant certificates.

•At least 2 years relevant working experience•Good interpersonal skills

•Candidates with welding, paint shop, NDT, Inspection skills will be an added advantage

Chua Mui Khim

( EA Registration Number : R22104766)

ASEANet Manpower Consulting Pte Ltd

(Co Reg : 202141565E / EA License: 21C0866)

We regret to inform that only shortlisted candidates will be notified

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a good focus on customer satisfaction.
• Meals provided daily.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Perform repair processes such as plasma spray, water jet, shot peening, heat treatment, cleaning, masking, blasting, sheetmetal etc
• Meet repair production schedule and delivery requirements
• Participate in cost control initiatives and continuous improvement projects/events
• Any other duties as assigned

Requirements:

• NITEC or equivalent, preferably with experiences in the component overhaul/repair industry
• Knowledge and skills in any repair process, e.g. plasma spray, water jet, shot-peening, heat treatment etc
• Able to perform rotating shift work, and support overtime, if required

Key Responsibilities

• Repair and soldering of PCB boards.
• Handle repair works of electronics / electrical components of equipment
• Handle parts teardown, re-assembly, re-certification and qualification
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

Requirements

• Minimum GCE O Level/NITEC
• Experienced in troubleshooting Electronics / Electrical component
• Soldering experience is advantageous

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a good focus on customer satisfaction.
• Meals provided daily.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Service Engineer (Semiconductor)

5 days, 9am- 6pm, may need to support short term night shift

Salary: $2700- $3800

Address: Woodlands

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a good focus on customer satisfaction.
• Meals provided daily.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Min 2 years of mobile Apple or Android repair experiences

• Able to work retail hours, 6-day work week, weekends, and public holidays

• Self-motivated. and team player

• Repairing of mobile phones / Macbook, LCD, Battery, spare parts replacement

• Diagnose, troubleshoot, and repair devices

• Able to Diagnosis & Repair Motherboard

• Provide actual diagnosis for clients,Ensuring work area are clean

• Ensure that all repairs meet CMS Repair quality standards

• Keep track of all devices and inventory while safeguarding all store stock

• Assist customers with their enquiries

• Able to comply with company rules and regulations.

Roles and Responsibility

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
• Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS 130000 and Rolls-Royce's SARRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from Customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source control Repair schemes, and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer/end user requirements.

Job Requirement

Bachelor’s degree in mechanical / Aeronautical / Material or other relevant Engineering discipline with Min. 5 years of Repair development or repair design experiences.

Technical Expertise

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good to have expertise in Nozzle Guide Vanes and Stator Vanes repair.

The performance of the onsite engineer will be evaluated based on:

• Timeliness and quality of repair schemes developed.
• Feedback from team members and stakeholders.
• Compliance with regulatory and internal quality standards.

Roles and Responsibilities

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
• Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS 130000 and Rolls-Royce's SARRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from Customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source control Repair schemes, and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.

Job Requirement

Bachelor’s degree in Mechanical/Aeronautical/Material or other relevant Engineering discipline with Min. 5 years of Repair development or repair design experiences.

Technical Expertise

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good to have expertise in Nozzle Guide Vanes and Stator Vanes repair.

The performance of the onsite engineer will be evaluated based on:

• Timeliness and quality of repair schemes developed.
• Feedback from team members and stakeholders.
• Compliance with regulatory and internal quality standards.

Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

• MNC Company
• Salary $2500 - $3000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tai Seng
• Working hours: Normal Working Hours

Job Responsibilities:

• Install electrical appliances, using hand tools or measuring instruments
• Build, calibrate, maintain, troubleshoot, or repair electrical or mechanical instruments
• Inspect electrical appliances for quality control and assurance
• Identify solutions to on-site technical design problems involving electrical and mechanical systems equipment
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum GCE ‘O’ level with at least 1-2 years of relevant experience
• Possess Class 3 driving license with own vehicle will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

1. Team Leadership

• Lead, supervise, and mentor a team of air conditioning repair and maintenance technicians.
• Provide ongoing training and development opportunities for the team. Foster a positive and collaborative work environment.

2. Service Coordination

• Develop and implement efficient repair and maintenance schedules.
• Coordinate service calls, prioritize tasks, and allocate resources effectively.
• Ensure prompt response to emergency repair requests.

3. Technical Expertise

• Stay updated on industry trends, new technologies, and advancements in air conditioning systems.
• Identify opportunities for process improvement and implement best practices.
• Provide technical guidance and support to technicians in troubleshooting and resolving complex issues.

4. Customer Satisfaction:

• Establish and maintain strong relationships with clients.
• Address customer inquiries, concerns, and ensure high levels of satisfaction.

5. Budget Management:

• Develop and manage the departmental budget, ensuring cost-effective operations.
• Monitor expenses, analyse budget variances, and implement cost-saving measures.

6. Compliance and Safety:

• Ensure compliance with industry regulations, safety standards, and company policies.
• Implement and enforce safety protocols to ensure the well-being of employees and customers.

7. Inventory Management:

• Manage and control the inventory of spare parts and equipment.
• Coordinate with suppliers to ensure the availability of required materials for repairs.
• Generate regular reports on repair and maintenance activities, including key performance indicators (KPIs).

8. Reporting:

• Provide updates to senior management on departmental performance and challenges.

Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum diploma in Electrical, Mechanical or Electronic field.
• At least 3 years of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified.

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform Non-Destructive Testing and its related duties in accordance with the written instructions and specific calibration requirements.

Essential Responsibilities:

• Perform specific calibrations, NDT, and specific evaluations for acceptance or rejection of parts
• Correct interpretation and understand the inspection operation sheets and work instruction
• Organize, sort and prepare the parts for NDT inspection
• Load, unload, and operate either the real-time XR, UT or auto FPI line effectively
• Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets
• Ensure the equipment operation readiness always
• Assist the Engineer for any inspection evaluation and reporting
• Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents
• Prepare and clean parts before and/or after inspection
• Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements
• Perform scheduled maintenance & housekeeping tasks

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible to set up and operate machines such as CNC machines in Milling, Grinding and Lathe; Electrical Discharge Machine (EDM); Surface Grinding; VT Lathe and various conventional machines and specialized equipment to perform machining operations. 

Essential Responsibilities:

• Set up and operate all types of conventional or CNC machines such as electrical discharge machine, laser machine, lathe, radial grinder, reciprocal grinder, milling machine, drilling machine, and specialized equipment to perform machining operation of the most complicated nature in the making of jigs, fixtures, tools, dies, gauges, test equipment and product parts, and their rework or modifications
• May follow a particular product through the machine shop using a variety of machine tools to complete the finished product
• Use all types of standard and special gauges, various hand tools
• Maintain pertinent records; work according to technical drawings and instructions
• Perform scheduled maintenance & housekeeping tasks
  

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read and understand the manufacturing operation sheets and standard operation procedures in English
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• Good mechanical aptitude
• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Aircraft Electronic Repair Technician (Aviation)
• Working Location: Seletar – Nearest MRT: Khatib
• Working Hours: Monday to Friday, 8.30 am – 5.45 pm (May need to work Saturdays depending on duty)
• Salary Package: Up to $2700 + Performance Bonus (Min. 1 month)
• Duration: Permanent

Key Responsibilities

• Regularly inspect, test, and troubleshoot avionics systems, including radar, navigation, communication, and flight control systems, ensuring they function correctly and comply with safety standards.
• Use specialized diagnostic tools and software to identify electronic malfunctions or system failures, isolating faults to efficiently carry out repairs.
• Conduct repairs, replacements, and adjustments to aircraft electronic systems such as autopilot, radio systems, GPS, and onboard computers.
• Install new electronic equipment or upgrades, such as advanced communication systems, navigation aids, or flight control systems, ensuring they integrate properly with existing aircraft systems.
• Inspect and repair aircraft wiring, ensuring proper electrical connections and shielding to prevent system failures or electrical fires.
• Calibrate, test, and adjust avionics instruments and sensors, ensuring the accuracy of crucial systems like altimeters, airspeed indicators, and flight data recorders.
• Log all diagnostic tests, repairs, installations, and inspections accurately in the aircraft's maintenance records to ensure compliance with aviation regulations and company policies.
• Follow all relevant aviation safety regulations, including FAA, EASA, or local aviation authority guidelines, ensuring all electronic systems meet strict airworthiness and operational standards.
• Ensure that avionics systems are running the latest software versions by performing regular updates and troubleshooting new software issues that may arise.
• Monitor and maintain the integrity of the aircraft’s electrical power supply to avionics systems, ensuring uninterrupted power flow and system reliability.

APPLY NOW!!!

• Min. Diploma in Aerospace Engineering or related
• Min. 1 year of relevant work experience in the aviation industry
• Training provided for candidates with no experience
• Preferably should have experience in workshop repairs
• Candidates with CAAS Aircraft Maintenance Certificate Preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70290 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a good focus on customer satisfaction.
• Meals provided daily.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Maintenance Engineer |

Location: Tuas
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant