Main Responsibilities

Maintain and monitor complex clients’ systems:

• Responsible for technical support for complex systems and problems, ensuring performance of the asset (client) is maintained throughout the course of the contract
• Collate and evaluate statistical data related to the performance of the assets
• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

Manage responses to emergency situations:

• Facilitate responses to emergency situations and recovery activities
• Evaluate and provide fast resolution to critical field performance issues
• Visit sites to diagnose BBP operational issues and develop resolution plans for complex cases that cannot be easily resolved
• Review and approve recommended repair works for major equipment and system failures
• Check performance deviations and define root cause for any performance issues and to escalate to either Engineering or Performance team, as needed.

Provide oversight on maintenance work:

• Responsible for the planning of corrective, preventive and predictive maintenance activities to ensure BBP equipment and client systems are fully functional and in optimal operating condition, preserving BBP energy savings
• Optimise maintenance plans and schedules for inspection, testing, repair and predictive maintenance of equipment and systems to minimise downtime and costs
• Provide technical guidance on equipment and systems maintenance
• Endorse resourcing requirements to achieve operational state in accordance with BBP expectations
• Drive internal and subcontractor compliance with the health & safety standards and practices

Support Customer Support/Business Development teams in creating further business opportunities:

• Foster close collaboration with Customer support team to ensure client performance and satisfaction
• Advise customer support team to correct inefficient uses of energy, both technically and procedurally and to support with data justification
• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

Organise and develop the team:

• Coach and train Central Maintenance engineers
• Drive talent recruitment and development for the department in alignment with organisational strategy

Qualifications

• Diploma/Degree in Electrical or Mechanical Engineering, Controls, Energy or Environmental Engineering.
• Possess people management experience
• 2-5 years’ experience in an Energy or Mechanical Engineering is an added advantage
• Professional Energy/Sustainability related certification a plus
• Qualification in Refrigeration and Air-conditioning and Energy Management will be an added advantage
• Well versed with HVAC systems, basic knowledge, good understanding on ACMV system and equipment
• Ability to understand piping and ducting and to oversee installation of instrumentation works (power meters, temperature sensors, and pressure sensors).
• Strong written and oral communication skills for customer interaction and report writing
• A willingness to learn and work in a team environment with extensive contact with clients
• Strong communication skills with the ability to work autonomously
• Self-starter with strong analytical and troubleshooting skills
• High level of initiative with the ability to work under pressure and extended hours, if required to meet deadlines

• Responsible for planning and managing food preparation in restaurant/cloud kitchens.
• Develop new menu options based on seasonal changes and customer demand.
• Assist with the preparation and planning of meal designs.
• Ensure that kitchen activities operate in a timely manner.
• Interaction with the customers and resolving the problems and concerns personally.
• Monitor and record inventory, and if necessary, order new supplies.
• Provide support to junior kitchen employees with various tasks including line cooking, food preparation, and dish plating.
• Train the new kitchen employees to meet kitchen standards.
• Create schedules for kitchen employees and evaluate their performance.
• Adhere to and implement sanitation of kitchen utensils and regulations and safety regulations.
• Expert in making traditional south Indian dishes mainly porota, Vadai, sadhya, south indian desserts

Overview

As a Maintenance Technician, you are responsible to optimize the performance of mechanical products, machinery, and equipment. You will assist the Maintenance Supervisor to analyze performance results and maintain mechanical equipment and machinery, which also covers maintaining electrical, plumbing, mechanical and related systems.

Responsibilities

1) Support maintenance function within the production department.

2) Perform in improvement project on regular basis.

3) Attend to all breakdowns of equipment.

4) Update maintenance records.

5) Determine material, equipment and supplies to be used and raise Purchase Requisition accordingly.

6) Carry out repair work within the factory for all machineries and facilities within capability.

7) Schedule maintenance of factory’s machineries and facilities.

8) Liaise with Company’s contractors and vendors for all repairs of machineries and maintenance of facilities.

9) Perform routine tasks such as machineries and equipment quality inspection system verifications and conformity to establish standards.

10) Maintain clean and orderly work areas.

11) Comply with safety regulations and Company’s standards.

12) Ensure that all ISO documentations relating to Technical / Maintenance of plant machineries and facilities are up-to-date.

13) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) At least ITE Certificate in Mechatronics / Mechanical / Electrical Engineering.

2) Minimum 3 years relevant working experience in manufacturing industry.

3) Experience in manufacturing and construction industry will be an advantage.

4) A good team player.

5) Physically Fit & Healthy.

6) Hardworking and driven.

7) Computer literate with MS Word, Excel, Power Point etc.

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Job Description

• Industry/ Organization Type: Manufacturing and Production
• Position Title: Maintenance Technician / Service Technician
• Working Location: Gul Circle
• Working Hours: 5 days (Mon – Fri, 8 am – 5.15 pm), OT on Alt Sat 8 AM - 4:30 PM
• Salary Package: Basic salary + Fixed Allowance $60 + Transport Allowance + Attendance Allowance + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Ensure smooth supply of facility to production section
• Maintain and ensure reliability of machines
• Ensure the equipment is in good operating condition after inspection, service and repair
• Follow according to the maintenance schedule
• Filing of all machine maintenance life history
• Safety of all machines for production and quality
• Calibration of machines
• Other general maintenance works

APPLY NOW!!!

• At least 1 year of relevant work experience
• Good interpersonal & communication skills.
• Physically fit

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65731 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Gul area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul

• FULL TRAINING PROVIDED
• Basic $ 1800 to $ 2800 + AWS + VB
• Working location: Northeast
• 5 days’ work week (Normal Working Hours)

Job Responsibilities:

• Involve in maintenance of CCTV / PA / Access Control / SCADA System, Integrated Security System and Power Systems including system design and coordination work
• Plan the project schedule with customers or vendor to conduct work at site
• Follow the schedule commitment and make sure that Project Engineer are updated on delays or problems
• Site supervision when project team or vendor is carrying out site work

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Summary:

• Basic up to: $3800
• AWS + VB
• Medical Insurance + Dental Benefits
• Working Days and Hours: Mon - Sat, 5.5 Days (Rotating Shift)
• Location of work: Mandai Link
• Good Career Progression

Job Responsibilities:

· Will be working on Warehouse Facilities and Automated Storage Retrieval System (ASRS)

· Working closely with a team of maintenance colleagues to ensure all jobs are performed according to the specifications and SOPs.

· Monitor and supervise the servicing and maintenance work carried out by external contractors to ensure works are completed according to specifications.

· Perform maintenance and repair with machinery equipment Etc., Refrigerant Systems indoor/outdoor units, compressor, evaporator, condenser, cooling tower.

· Perform maintenance Fire Detection System, Ammonia Plant and Oxygen Reduction System.

· Work as a Team/Individual depending on the work assignment.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Toh Cheng Jie (Martin)

Registration Number: R23117397

EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Job Description & Requirements

1. Carry out daily inspection for facility plant equipment.
2. Carry out periodic maintenance of machines & ensure that all potential environmental impact associated with the machineries are minimized & mitigated.
3. Carry out schedule and preventive maintenance works.
4. Attend to breakdowns and assist in repair works, and escalate calls for vendor support if necessary.
5. Update and maintain records of plant equipment and machinery.
6. Upkeep the spare parts list and ensure purchases requisitions are made.

Competence Requirement

· Preferred to have NTC/ Diploma in Mechanical / Mechantronics / Electrical Engineering field.

• Fresh may be considered, but preferred with 1 – 2 years of related experiences in Maintenance of Equipments.

Job Description

• Industry/ Organization Type: Freight Transport
• Position Title: Fleet Maintenance & Repair Representative
• Working Location: HarbourFront
• Working Hours: 5 days (Mon – Fri, 9.00 am – 6.00 pm)
• Salary Package: Basic up to $5,000 + AWS + $100 Mobile Reimbursement
• Duration: Permanent Role

Key Responsibilities

• Evaluating and negotiating incoming Maintenance & Repair estimates with the respective repair vendor/depot
• Ensure the best possible M&R quality in a most cost-effective manner
• Checking incoming Equipment Check reports (ECR) upon plausibility and correctness
• Registering and maintaining tank database in in-house VistaMare system
• Assist in negotiating M&R terms and conditions with regional service provider
• Ensure adequate depot performance based on guidelines and requirements by conducting regular depot visits and audits
• Monitor depot Turnaround times
• Point of entry for the M&R service provider (in- and external)
• Assist operative Business units with technical expertise
• Accurate and timely maintenance of all necessary data in the respective systems (i.e. Vista Mare, Monitor)
• Ensure proper cost allocation and handling of claims/liabilities

APPLY NOW!!!

• Nitec/Diploma/Degree in Engineering or related discipline
• Possess technical knowledge in the tank container industry
• 1-2 year’s experience in similiar job function
• Good communicator with fluency in English
• Good IT skills
• Self-confidence and basic negotiation skills
• Willing to travel for visiting customer and/or supplier

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66048 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Prefabricated Steel
• Position Title: Maintenance Technician / Mechatronics Technician
• Working Location: Jurong West
• Working Hours: 5.5 days, Mon - Fri (7 am - 4 pm) / Sat (7 am – 11 am)
• Salary Package: Salary up to $3,900 (OT inclusive)
• Duration: Permanent Role

Key Responsibilities

• Conduct regular inspections and maintenance of machinery, equipment, systems, and infrastructures.
• Respond promptly to machine breakdowns, employing troubleshooting and fault-finding techniques to identify and resolve issues.
• Ensure that all industrial machinery and equipment operate smoothly and reliably to minimize downtime.
• Plan and execute scheduled maintenance tasks to prevent unexpected failures and optimize performance.
• Perform daily housekeeping duties to maintain a safe and clean work environment.
• Carry out any additional tasks and duties as assigned by supervisors.

APPLY NOW!!!

• Completion of ITE/NTC program in electrical, mechanical, mechatronics, or a similar discipline.
• A minimum of 2-3 years of hands-on experience in troubleshooting and repairing industrial automation machinery.
• Willingness to work overtime as needed to meet maintenance demands.
• Knowledge of PLC (Programmable Logic Controller) and drive control systems is preferred.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65736 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Industrial Machinery/ Equipment
• Position Title: Auto Mechanic/ Car Repair Mechanic
• Working Location: Sin Ming
• Working Hours: 6 Days, Mon to Fri (9 am – 6 pm), Sat (9 am – 4 pm)
• Salary Package: Basic (Up to $2,800) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Diagnose and repair automotive vehicles, including identifying problems with vehicles using diagnostic equipment.
• Perform routine vehicle tune-ups, maintenance, and inspections.
• Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks).
• Keep equipment available for use by inspecting and testing vehicles.
• Completing preventive maintenance such as engine tune-ups, oil changes, tire rotation and changes, wheel balancing, and replacing filters.
• Maintain a safe and clean working environment.
• Collaborate with the team to diagnose problems with vehicles and plan repairs.
• Maintain accurate records of each repair performed on vehicles.
• Other ad hoc tasks as assigned.

APPLY NOW!!!

• Proven experience as an auto mechanic.
• Good knowledge of mechanical, electrical, and electronic components of vehicles.
• Ability to handle various tools (e.g., pliers) and heavy equipment (e.g., lift).
• Effective communication skills to explain complex technical information to clients in a clear and straightforward manner.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65246 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic , other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will commensurate with skill and experience

5 days work week

Position Summary

Preparation of tender and/or invoice for ship-repair and/or conversion projects on the basis of manhours, materials and subcontractor costing both prior to / after award of contract. Discuss with customers/subcontractors/trades regarding scope of work and settle the invoice.

Tasks and Responsibilities

• Understand and evaluate Technical Specification. Preparation and timely submission of comprehensive quotation according to technical specification requirement.
• Preparation and timely submission of Repair Invoice to Owners according to the work carried out. Discuss, negotiate and close out invoices with owners. Following up of ongoing work and updating of Cost and Budget.
• Sourcing of sub-contractors/vendors for ship-repair works and Issue Purchase Order, including negotiation of Subcontractors/vendors Invoices’.
• Maintain proper order of Estimating and invoicing filing.
• Keeping in close contact with Owners and Production alike for updates on repairs on board.
• Close follow up on estimated manhours and actual manhours. Discuss with relevant trade supervisors and revise and/or control the manhours.
• Negotiate with vendors for equipment purchases related to Repairs and Conversions, prepare Sales Agreements / Invoices.
• Prepare and submit profit and loss reports for management reporting.

Job Requirements

• Minimum (2) years working experience in the field of ship repairs.
• Minimum (2) years working experience in the Commercial Department of a medium sized Shipyard.

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Technical Officer (Maintenance- Instrumentation & Control)

West – Jurong Island, pick-up near Jurong East MRT Station

Responsibilities:

• Carrying out Preventive and Corrective maintenance in accordance with maintenance plans and as work requests raised in the system.
• Maintaining accurate and up-to-date records of all activities performed in the associated systems.
• To perform all jobs in accordance to safe working practices followed in the plant.
• Interact with Operation Staff on maintenance works.
• To assist, supervise contractors assigned for specific works.
• Contributing to the development of asset maintenance plans
• To monitor and take appropriate action to maintain critical spares.
• Assist in liaising with external agencies for all regulatory compliances.
• Responding to emergencies in plant

Requirements:

• Preferably Degree or Diploma in Electrical or Electronics Engineering or equivalent College degree may be waived if equivalent, extensive related experience can be demonstrated.
• Skill sets required – through knowledge on types of process instruments, calibration of instruments/gauges, understanding of control/instrument drawings pneumatic/hydraulic circuits, computers, knowledge in PLC and DCS would be added advantage
• At least 3 to 5 years of relevant experience in a similar capacity, within a Power plant or related Industries.
• Self-motivated independent and has sound analytical and communication skills and is a team worker.
• May be required to work beyond office hours & weekends.

Others:

• Working location: Jurong Island
• 5-day work week
• Company transport provided from Jurong East MRT

Interested applicants, please forward your detailed resume including your last drawn salary, expected salary and date of availability to:

[email protected]

Please indicate the position that you are applying on the subject.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”) or to [email protected], you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

Work Location : Suntec/ City Hall

Work Hours : Monday to Saturdays 9.00am to 6.00pm ) Sunday and PH Not Required off.

Job Responsibilities:

General Maintence of the area.

General upkeep and minor repairs and keep the are building clean.

Keep detailed records of job.

performing preventative maintenence.

Follow safety rules.

Others Adhoc job that assign to you.

Job Requirement

-At least N level or cert in building

-manitenance/ electrical engineering

have similar work experience.

Salary : $2500-3500

22C1322 Maxhunt Resource Pte Ltd

R23115755 Choy Sin Ern Nicole

Job Description & Requirements

1. Carry out daily inspection for facility plant equipment.
2. Carry out periodic maintenance of machines & ensure that all potential environmental impact associated with the machineries are minimized & mitigated.
3. Carry out schedule and preventive maintenance works.
4. Attend to breakdowns and assist in repair works, and escalate calls for vendor support if necessary.
5. Update and maintain records of plant equipment and machinery.
6. Upkeep the spare parts list and ensure purchases requisitions are made.

Competence Requirement

· Preferred to have NTC/ Diploma in Mechanical / Mechantronics / Electrical Engineering field.

• Fresh may be considered, but preferred with 1 – 2 years of related experiences in Maintenance of Equipments.

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Production Maintenance Technician/ Chemical Process Technician
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $2,500 + Transport Allowance + Code of Conduct Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct hydrogen peroxide purification to meet targets and quality standards.
• Operate ammonium hydroxide mixing processes within set targets and quality norms.
• Manage operations including Ultra-Pure Water System maintenance, Waste-Water System upkeep and Utilities Equipment operations (Chillers, Water Tanks, Compressors, FFW, etc.)
• Troubleshoot and repair process equipment.
• Perform routine preventive maintenance on production items.
• Calibrate production instruments and equipment.
• Enhance process efficiency and operation lines.
• Compile and prepare progress and statistical reports using checksheets and datasheets.
• Inspect production areas and take corrective action as needed.
• Execute additional tasks as directed by superiors.

APPLY NOW!!!

• At least Nitec in any Engineering.
• Preferably with minimum 1 year of related experience. However, inexperienced candidates are welcome to apply as training will be provided.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65941 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Duties & Responsibilities:

1.1. Set department objectives and targets to support the achievement of company goals and objectives.

1.2. Responsible for ensuring that overall plant facility and equipment are well maintained and in good working condition. This covers production machineries, building safety, electrical distribution system, air conditioning, lighting, piping, compressors and scrubbers, sewage and WWTP systems.

1.3. To organize and lead workshop safety and health committee meeting

1.4. To lead in 5S implementation in the factory

1.5. Plan and ensure that preventive maintenance for facilities and equipment are carried out as scheduled.

1.6. Oversee jobs and projects related to facilities, equipment and machine maintenance from planning, installation to completion and use including obtaining the required permits and approvals in carrying out the activities.

1.7. Ensure compliance of the plant and activities to applicable legislation on safety, environment and health.

1.8. To liaise with government agencies regarding water, electricity, discharge of trade affluent matters and submission of accident reports, water efficiency management reports (WEMP) to respective agencies

1.9. Develop contingency plans for utility interruptions to ensure uninterrupted facility services to operations.

1.10. Coordinate and troubleshoot facility, equipment and machine related problems with sense of urgency.

1.11. Monitor and improve performance/efficiency of equipment.

1.12. Manage and control equipment spare parts inventories to optimum level.

1.10. Perform other duties as deemed necessary by the superior.

1.11. To identify training needs and development for staff under his care

Qualification:

Diploma/Degree in Electrical or Mechanical Engineering or equivalent

Job Requirements:

Minimum 5 years working experience, preferably in a manufacturing industry.

Good maintenance planning skill and sense of urgency

Knowledge in plant utilities supply system

Familiar with Environmental Pollution Act, Safety and MOM requirements

Reporting Level:

Senior Manager / Head of Production

Job duties:

• Conducting repair and soldering PCB boards tasks
• Perform a variety of inspection and gauging operations to ensure good quality standards.
• Provide the support to another employee or other shift upon the demanding
• Ensure productivity and quality are met

Requirements:

• NITEC in any engineering related
• 0 to 1 year PCB board repair by using microscope equipment
• Willing to work in cleanroom environment

Monday to Friday, office hours + Overtime

Basic Up $3000 + Overtime + AWS + Performance bonus + Other allowances

Location: Kallang

For a confidential discussion, please forward a copy of your latest CV in Word format to [email protected]

Please include the following details in your resume:

• Expected salary

• Notice period

We regret that only shortlisted applicants will be notified.

Tan Lee Fong, Grayson | Reg No.R1441412| EA License No. 02C3423 |

Position Summary:

The Maintenance Technician will analyze production results to increase efficiency while maintaining quality for short term containment and long-term resolutions. He/she will demonstrate skill in managing projects to completion on time and within budget, as well as completing mechanical work to implement those projects.

In accomplishing the work of this position, the Maintenance Technician must be able to read and understand electrical schematics, blue prints, flow diagrams, technical specifications, and equipment manuals to assist in the design and build of manufacturing processing equipment. Proficiency with hand and power tools, and other manufacturing tools is a requirement.

Expected Results:

• Perform maintenance tasks to keep production equipment operational
• Perform work at the highest safety levels, promote safety internally and work directly with contractors on safety procedures
• Work with cross functional teams to identify and insure sound maintenance processes are develop for capital projects

Accountabilities:

• Maintain, repair and troubleshoot all plant equipment
• Schedule and perform preventative maintenance. Participate in 5S and TPM teams.
• Assist in developing new equipment or plant expansion projects
• Contact, direct and promote the safety of contractors to perform specific inspections or maintenance work
• Maintain accurate and up to date maintenance records.
• Work safely around and appropriately handles hazardous chemicals around plant.
• Perform mechanical PM & CM of Plant engineering Utilities, Facilities & Manufacturing equipment’s in a timely and effective manner to ensure its safe & reliability of proper cleaning, lubrication and prevent mishandling.
• Operate & maintain system such as generation and distribution of steam boiler, water treatment, HVAC, air-compressor, chemical & gas system, fire alarm and fire protection system.
• Assist in spare part management.
• Maintain an effective communication between shift to ensure smooth transition of work.
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute to maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or ad hoc basis
• Use Computerized Maintenance Management System (CMMS) workflow to receive, update and close assigned Work Orders and checklist
• Support in ensuring that contractors or third-party vendors execute maintenance tasks / activities at site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health, and environment regulations.
• Perform equipment or system testing / commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance / project completion
• Participate in routine safety drills, work order, troubleshooting and failure analysis
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes and safety standards
• Assist to maintain spare parts inventory levels, support on delivery checks by suppliers and maintain good preservation/housekeeping in the store

Technical Skills/Experience/Background/Traits:

• Basic mechanical skills related to the use of hand and power tools
• Basic knowledge of process control, refrigeration, boilers, steam, pumps, heat exchangers, LOTO, and industrial safety practices
• Previous electrical work experience a plus
• Water treatment experience preferred
• 1-3 years’ experience in chemical manufacturing environment a plus
• 4-5 years maintenance experience or educational equivalent preferred
• Computer Skills and CMMS software experience a plus
• Ability to balance multiple priorities in a fast paced, constantly changing environment

Educational Preferences/Requirements:

• High school diploma or (GED) required
• Mechanical or Mechatronics l Nitec, Higher Nitec

Working Location:

• Tuas

Target date to Start Work:

• 1st Quarter of 2024

Information

*Working hours: Mon - Fri; 8am - 5.30pm

*Meal Allowance: $70

*Annual Leave: 13-18 days

Responsibilities:

• Maintenance of mechanism & electrical installations and equipment.
• Provide engineering support to the Production department.
• Diagnose, repair and preventive maintenance of equipment to minimize breakdown.
• Carry out instrumentation calibration activities.
• Maintenance and troubleshooting of entire facility duties.
• Involve in Total Productive Maintenance activities.

Requirements:

• ITE and above in Electrical/Mechatronics Engineering
• Experience in PLC and electrical maintenance & installation,
• Able to perform welding, piping work, and simple machining work.
• Computer literacy and able to work shifts hours.
• Willing to wear jumpsuit and mask

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang

Registration Number: R21102570

Workstone Pte Ltd

EA License Number: 19C9998

about the job

• Oversee all aspects of component repair operations for Commercial Engines business
• Product portfolio comprises of commercial and military aircraft engine parts repair
• Drive operational excellence and be accountable for engine on-time delivery and contractual TAT, cost
• control, productivity hit-ratio metrics as well as quality and safety compliance
• Plan and control repair production as well as allocate manpower and resources
• Manage component repair revenue hours
• Ensure compliance of quality standards and regulations
• Lead in customer focus teams to liaise with customers
• Provide leadership and guidance to production team
• Lead Continuous Improvement/ Kaizen /Digitalization /Automation initiatives

skills and experience required

• Bachelor's in Mechanical/Aeronautical Engineering Degree or equivalent
• Knowledge and experience in aircraft engine workshop practices and MRO of gas turbine engines
• Knowledge of aviation authority regulations (CAAS, FAA, EASA, CAAC)

If you are interested in the position, kindly send your CVs to sean.ho@randstad.com.sg

Please include your availability, expected salary and reason for leaving your current job.

We regret that only shortlisted candidates will be contacted.

Applicants must be fully vaccinated or have a valid exemption in accordance with MOM’s regulations to allow them to enter the workplace. Applicants may be required to share verifiable COVID-19 vaccination documents or proof of a valid exemption at the point of offer. Randstad Pte. Limited and/or the Client reserves the right to withdraw an offer if the applicant fails to provide verifiable COVID-19 vaccination and/or proof of exemption documents.