Job Summary

Regularly performs the full range and scope of maintenance and housekeeping services that include, but not limited to: the upkeep of buildings, grounds, fixtures, equipment, NEXCOM Hospitality Group (NHG) guest rooms, public spaces, etc. Assignments include simple painting, plumbing, carpentry,

electrical repairs, maintenance using various equipment, etc. Takes initiative to ensure all aspects of the facility are working correctly.

Duties & Responsibilities

• Performs work in at least two of the following trades in the maintenance and repair of buildings and related fixtures. Maintains work order log and follows up as required. Reports status to supervisor. Logs trouble calls with contractor, as appropriate.
• Plumbing: Makes basic plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, shut-off valves on washing machines and water supply which can be accomplished by removing, cleaning, resealing, replacing defective parts or units, installing water heaters, garbage disposals, faucets and sinks.
• Washer/Dryer repair: Performs routine maintenance on washers and dryers to include cleaning lint ducts and vents, replacing hoses and fittings as required, and referring more complex problems to supervisor for action.
• Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units as appropriate.
• Electrical: Recognizes and reports electrical problems making repairs as appropriate. Replaces fluorescent and incandescent ballasts, bulbs and tubes.
• Carpentry: Measures, cuts and constructs or repairs wood or wood substitute items. Conducts basic carpentry repairs such as repairing or replacing screens; window and door frames; molding and trim; and repair and replacement of drywall or similar products.
• Painting: Preparation of areas and standard coating methods such as brushing, rolling and spraying and ensure surfaces are fully coated, protected and free from drips and runs.
• Responsible for a variety of semi-skilled and unskilled tasks involving standard methods related to the operation and maintenance of facilities.
• Work assignments (completed and in-progress) are spot-checked on a daily basis via documented inspection reports to assure that work practices, techniques, records, and other functions are technically accurate and in compliance with instructions. Recurring assignments (e.g. follow-up on maintenance requests reported by guests, housekeeping, or front desk) are carried out independently without specific instructions.
• Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, commonly used chemicals and basic safe work practices is required.
• Complete all required safety/security training.
• Required to do considerable standing, bending, walking, pushing, pulling, and climbing. Must have ability to perform moderately strenuous physical labor as unassisted lifting, moving, and carrying of supplies and equipment weighing up to 45 pounds (100 pounds assisted) is required. Must be able to climb/descend stairs and ladders, stoop, bend, kneel and work in uncomfortable positions.
• Work involves normal risks or discomforts associated with property operations, facility management, and/or mechanical systems. Work is performed both indoors and outdoors with potential exposure to extreme weather or temperature conditions. Occasional exposure to dusty or dirty conditions exists when visiting rooms or facilities undergoing repair, maintenance, or renovation. Personal Protective Equipment (PPE) is provided.
• Incumbent is expected to perform daily work on own initiative and carry out assignments in accordance with DOD and Navy regulations. Situations involving unfamiliar problems not covered by instructions are referred to the supervisor for resolution.
• Typically employee uses routine instructions and work methods that are common to the trade and may be general in nature. Where available the incumbent will rely on blueprints, manufacturer's instructions, manuals, and maintenance specifications.
• May be required to possess a valid state driver license, as travel to other facilities may be required within the normal scope of duties. Applicants will be notified when this is a requirement for appointment.
• This position is subject to the possibility of workdays on weekends and holidays, as well as, rotating shifts, often consisting of other than normal duty hours. May be recalled to duty and/or required to work overtime, including on an emergency basis.
• Performs other related duties as assigned

Education & Qualifications

• Technical certification
• Minimum two years of experience with demonstrated skill in two areas (Carpentry, Plumbing, HVAC, Electrical, Painting).
• Knowledge in the applicable combination of trades sufficient to perform the duties of the position.
• Basic knowledge of trade practices sufficient to complete tasks using common skills.
• Familiarity with safe use of common hand and powered tools.
• Possession of, or ability to obtain a valid driver's license is preferred but not mandatory.

Required Documents

• A copy of highest education certificate.
• A copy of full transcripts of corresponding education used to support this application.

Conditions of Employment

• Satisfactorily complete and maintain clearance of a Local Agency Check (LAC).

Benefits

• Eligibility to accrue leave, be placed in a comprehensive employee group insurance program and enjoy a one-month annual wage supplement.

How To Apply

• Applicants must apply via MyCareersFuture for consideration.

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Cabling Technician

Salary range: Up to $3300

Working days: Monday to Friday

Working hours: 8am - 6pm

Working Location: Mandai Estate - Kranji / Yew Tee

Job Description

• Install, repair, test & commission cable systems (voice/data/fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance
• Assist co-workers with installation & routine maintenance of structured cabling systems
• Work closely with client to manage schedule operations of assigned duties.

Requirements

• NITEC (Electrical Engineering / Electrical Technology/ Electronic / IT ) or work- related experience
• Class 3 driving license would be advantageous

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Our client is a specialized provider in Asia that focuses on delivering unique solutions for welding gases and safety, aiming to enhance operational efficiency and safety practices across various industries.

• Oversee the efficient operation and maintenance of gas supply facilities and associated equipment.
• Develop project designs, estimate costs, and present the results.
• Deliver technical training to staff while assessing materials, subcontractors, and suppliers.
• Ensure adherence to government regulations and respond effectively to emergencies.

Requirements:

• Degree in Mechanical/Electrical/Electronic/Mechatronic Engineering or equivalent.
• At least 2 years of experience with Gas/Medical Gas Systems.
• Proficient in AutoCAD

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform visual and dimensional inspection to written quality plans on incoming in-process and finished engine components. 

Essential Responsibilities:

• Ensure quality of parts meet specification requirements
• Ensure proper work clearance, correctness, and completeness
• Prevent non-conforming parts from proceeding to the next work station
• Provide support to Manufacturing Engineers and Quality System Engineers for evaluations, audits related activities
• Collect data, feedback on the quality of parts inspected to the Manufacturing Engineers and Quality System Engineers
• Perform visual & dimensional inspections, and set area management of the parts
• Perform scheduled maintenance & housekeeping task

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Computer literacy in Microsoft Office
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer/ Technician to be part of our IE&CE Advanced Mechatronics Department diverse team of talent.

What you will be working on:

• Fault identification, disassembly or removal of fault component
• Conduct acceptance tests on repaired part such that its functionality is repeatable and reproducible to ensure good quality
• Ensure proper knowledge transfer is conducted and supervise Industrial Attachment (IA) students
• Provide support to module Equipment Engineers and perform repairs for wafer fab frontline semiconductor production equipment and parts in cleanroom environment, on ad-hoc basis
• Adhere to SOP when performing repairs to ensure best quality and to strive to achieve 95% repair success rate
• Perform inventory control on consumables and spare parts used in repair workshop
• Source and liaise with vendors for quotations of required parts and follow up on delivery timeline
• Ensure workplace safety is practiced at all times

More about you:

• Diploma/ Higher Nitec/ Nitec (Microelectronics, Mechatronics, Electrical, Mechanical)
• Minimum 3 years of relevant experience in semiconductor field
• Fresh graduates are welcome to apply
• Expertise in either soldering, pumps, valves or strong knowledge in Microelectronics
• Able to perform circuit board repair and component level troubleshooting skills
• Resourceful and has initiative
• Working experience in front end semiconductor industry would be advantageous

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Serve as the main point of contact for the maintenance project.
• Coordinate maintenance requests, receive instructions, and attend meetings.
• Ensure all works comply with the approved works program and methodology.
• Manage relationships with clients, contractors, and suppliers.
• Prepare and submit reports, quotes, and other required documents.
• Review and accept deliverables.
• Supervise the Maintenance Team.
• Arrange major contracts for services performed by sub-contractors.
• Establish service agreements, including leases and insurance for vehicles and policies related to maintenance work.
• Conduct regular reviews of the Maintenance Plan with the Project Manager.
• Submit monthly maintenance reports and attend all maintenance meetings.
• Plan and schedule routine preventive maintenance.
• Review the performance of routine preventive and corrective maintenance with Team Leads.
• Conduct regular reviews of Standard Maintenance Procedures.

Requirements:

• Relevant engineering/technical degree or diploma from a recognized university or tertiary institution.
• Must at least have 5 years of relevant working experience in the maintenance of IT or electronic systems.
• PMP certification required for diploma holders.

Role Profile

This role is accountable for ensuring that everyone on the team knows and executes his or her role, feels empowered and supported in the role, knows the roles of the other team members and acts upon the belief that those roles will be performed.

Key Responsibilities:

• Plan, manage and implement the maintenance operations effectively to ensure PM schedules and CM are carried out within the maintenance budget and Service Level Agreement
• Plan for improvement in the reliability, maintainability and availability of the system
• Ensure the productions system are maintained and conforms to the contract, code of practices and technical requirements
• Prepare and submit monthly maintenance report
• Attend maintenance meetings with customer periodically to constantly upkeep quality standard as per company QMS
• Upkeep obsolescence management on the maintenance for system and ensure proper change request and upkeep proper documentation changes
• Obtain quotations for materials, equipment and contractors required for maintenance operations and raise PO
• Manage and coach a team of technical support engineers and technicians and ensure that the team is adequately trained to perform the tasks given
• Manage the sub-contractors required for the maintenance operation to ensure that works are done in a professional manner
• Prepare training materials and conduct yearly re-training for customers
• Establish procedures for work at site and ensure all safety measures and proper housekeeping rules are observed at work sites. Inculcate the “safety first” attitude in all workers.
• Carry out plan to consolidate/centralise maintenance staff movement and staff competency to increase efficiency in order to improve profitability.
• Implement and update company records e.g. training matrices, performance reviews, risk assessments
• Communicate KPIs from the strategic annual plan so that each staff is aware
• Perform root cause analysis and resolve problems
• Conduct risk assessments of processes and tasks in the department

Competence (Knowledge, Skills and Abilities):

• Understanding and knowledge of the Singapore security and surveillance sector and its operating environment
• Understanding and knowledge of the Singapore security and surveillance technology in their limitations and applications
• Skills in relating to and servicing the end-users with a win-win mind set
• Skills in people management and employee development
• Good understanding of the software and hardware environment for ICT platform and CCTV/network sensors system
• Sound knowledge and experience in IT, IP networking and network security solution/product
• Preferably with a Professional Certificate in Project Management

Requirements:

• Ability to handle multiple responsibilities in a fast paced and performance driven environment
• Able to converse well with customers on enquiries
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction
• Class 3 License is an advantage

Education & Experience:

• Degree in Electronics & Computer Engineering or related discipline
• At least 7 years of experience in a similar capacity
• Preference for candidate with security and surveillance experience

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Job Description:

• Responsible for maintaining, troubleshooting, and repairing all plant machinery.
• Perform regular check on mechanical equipment to keep equipment functioning at optimal efficiency.
• Insured the continuous implementation of a preventive maintenance program to control maintenance cost and improve equipment performance.
• Work closely with section manager in detailed planning, design and implementation of the mechanical system upgrade.
• Train technician teams in performing maintenance work according to protocols.
• Document Maintenance and Repairs in Daily Log.
• Perform other duties as assigned..

Job Requirement:

• Good interpersonal and communication skill
• Strong hands on maintenance and troubleshooting skill
• With related experience in process plant environment preferred
• Able to work independently and with a team to completion of tasks

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Responsibilities:

- Uphold a high standard of hygiene and cleanliness throughout the customer premises.

- Manage the execution and performance of junior staff, delivering adequate training and guidance to meet contractual standards.

- Conduct daily inspections to monitor and evaluate the work of the staff, taking immediate corrective measures to improve any substandard performance.

- Perform cleaning duties in assigned areas and fill in for staff when required (e.g., during staff leave, medical leave, or absences).

- Ensure compliance with cleanliness and hygiene standards, as well as Health & Safety Environmental procedures and practices. Promptly report any accidents or incidents to your superior.

- Handle and inspect cleaning equipment such as blowers, vacuum cleaners, and general household cleaning tools regularly, and promptly report any malfunctioning machines to your superior.

- Undertake any other duties or projects assigned by your superior.

Key Cleaning Duties:

- Perform floor mopping.

- Vacuum carpets.

- Wipe office furniture.

- Clean desks and phones.

- Wipe windows and glass partitions.

- Ensure cleanliness of all telephone sets and workstations.

- Dispose of office litter bins on a daily basis.

- Dispose of rubbish bins in the pantry areas on a daily basis.

- Thoroughly clean and stock both female and male toilets with necessary toiletries, such as paper rolls and soap solutions.

- Maintain the cleanliness of the pantry, including managing detergent supplies and disposing of rubbish and sanitary items appropriately.

We are looking for an Asst Engineer / Engineer to be part of one or more teams in supporting and maintaining systems, keep them up and running smoothly 24/7. The Asst Engineer / Engineer should have broad technical skills and a working background in the System-Level Maintenance in the following disciplines, Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS.

Responsibilities:

• Involve in one or more teams in supporting and maintaining systems, keep them up and running smoothly
• Report to the Team Lead/Service Delivery Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement.
• Assist Team Lead/Service Delivery Manager to deliver contract obligation within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.
• Liaison with procurement and equipment vendors.
• Perform 24/7 off-site standby for fault activation after office hours.
• Arrange and attend monthly meeting with customers.
• Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management.
• Provide solutions to technical problem associate with RF communication systems.
• Required to travel to sites for work

Requirements

• Minimum of Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns)
• Preferably with experience in System-Level Maintenance in the following disciplines is highly preferred (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in written, verbal and interpersonal skills
• Proficient in MS Office (Words, Power-point & Excel)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Roles & Responsibilities:

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Assist in operations on ground as and when required

- Any other related duties assigned by manager

JK Tan (R1875280) Job Expert Pte Ltd (Co Reg: 202007543Z; EA License 21C0766)

By submitting your personal data and/or resume, you are giving consent to collect, use and disclosure of your personal data and/ or resume by the company (or its appointed EA ) for the purpose of the processing and administration relating to this job application.Only shortlisted candidates will be notified

Job Description

• Industry/ Organization Type: Cargo & Container Leasing
• Position Title: Maintenance & Repair Manager / M&R Manager
• Working Location: Bugis
• Working Hours: 5 days (Monday to Friday 8.30 AM – 5.30 PM)
• Salary Package: Basic Salary up to $7,000 + AWS + Performance Bonus + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Responsible for the technical management of the tank containers within a defined geographic area (Asia)
• Arrange and coordinate timely delivery of the repair and modification estimates supplied by the depot workshops
• Evaluate correctness and ensure complete and accurate administration
• Coordinate and/or conduct the surveys and inspections on the tank containers
• Coordinate the repair process at the depots and monitor the progress of repairs and modifications
• Monitor cost control of the service providers in your region
• Provide Technical support/troubleshooting when needed
• Control of the stock and repair overviews
• Build and maintain a working relationship with the service providers, subcontractors, and suppliers
• Perform Depot audits as required
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Engineering, Administration, Facility Management or equivalent
• Has a minimum of 5 years of working experience, preferably at a tank container depot
• In-depth knowledge of Dangerous Goods Transport (worldwide)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68000 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• To provide administrative role and co-ordination support to maintenance / project team
• Co-ordination between customers and clients for scheduling of maintenance / Landscape works
• Co-ordinate Landscape work for maintenance team
• Answering in-coming phone calls and perform general office duties as and when required
• Prepare quotation and to handle customer enquiries
• To manage and supervise workers in all horticultural operations, tree pruning and removal works and maintenance.
• Lead the execution and coordination of landscaping works and landscape maintenance works.
• Plan work schedules, manpower and equipment according to contract specifications.
• Attend and coordinate to clients’ requests, meetings and provide creative solutions for landscape issues.
• Conduct monthly site assessments to inspect horticultural practices and landscape quality requirements.
• Prepare site reports to detail observation and recommendations to be submitted monthly internally and externally.
• Establish reporting norms for supervisor and gardeners to follow and to report site progress and issues.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Maintenance Coordinator

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

To coordinate Maintenance Activities between Production and Technical department. Support GCM/SDM MA & MO activities. Support work permit and authorization activities.

Responsibilities:

• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan.
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed.
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well.
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage.
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up.
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production.
• Support work permitting and work authorization activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Related working experience in the chemical industry.
• Diploma/Degree in relevant field.
• Minimum 2-3 years of experience in maintenance planning and coordination.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279