Roles & Responsibilities:

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Assist in operations on ground as and when required

- Any other related duties assigned by manager

JK Tan (R1875280) Job Expert Pte Ltd (Co Reg: 202007543Z; EA License 21C0766)

By submitting your personal data and/or resume, you are giving consent to collect, use and disclosure of your personal data and/ or resume by the company (or its appointed EA ) for the purpose of the processing and administration relating to this job application.Only shortlisted candidates will be notified

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Environmental/Health/Safety) or equivalent.
• At least 5 Year(s) of working experience in the related field is required for this position. Required Skill(s): Safety, Health, Environment, HSE Coordination, Safety compliance, Safety enforcement, Safety Supervision, Safety Administration, Safety roles and responsibilities Preferably Junior Executive specialized in Engineering - Environmental/Health/Safety or equivalent.
• The individual shall report to the Site Manager for the MPS BPA2 SDM 2018 project.
• You are to be involved in scheduled EHS activities. You will take the appropriate action to discourage employees from taking risks.
• Counsel and appropriately educate those who fail to consider the well-being of themselves and that of others around them.
• Develop the project EHS processes and deliver to the Project and Construction Manager.
• Guide the development of the site project orientation and coordinate the EHS Training program for all personnel coming to site. Participate in the EHS audit and inspection schemes being applied. Establish and maintain effective communications and coordination between Owner and FSME. Audit and monitor all FSME EHS Program, advise the Construction Manager and field supervisors of any shortfalls and provide specialist support.
• Participate in scheduled inspections of all work areas to ensure compliance on the part of FSME with regard to safe working practices and application of EHS program and ensure field personnel are monitoring their EHS performance.
• Review all incident investigation and Near Miss reports to ensure that the appropriate corrective actions are generated, and ensure that the project maintains records and documentation as per the statutory requirements.
• Monitor EHS status and periodically reports to the PM and SM on performance. Produce project EHS statistics and reports where applicable.
• Communicate Incident reports and lessons learnt to project personnel. Provide advice to FSME in the development of risk assessment. Advise supervisory staff and employees in the implementation of strategies to identify and control potential hazards.
• Provide assistance to site supervisors with Incident investigation and initiate analysis to discover accident trends and corrective actions.
• Attend SDM Pre-start and Toolbox Meetings. Conduct safety inspections and assessments. Assist supervisors to resolve hazard issues. Attend scheduled Project HSE meetings.
• Ensure the injury Management process is being adhered to and monitor & guide any rehabilitation or return to work requirements.
• Arrange and participate in site safety training activities as well as coordinate and/or conduct additional project specific employee safety training as identified through the project training needs analysis. To develop, update and implement the Project EHS Activity Plan as a tool to manage site EHS activities in a systematic manner.

Full-Time Cleaners Wanted! (SG or PR ONLY)

诚聘全职清洁工!（SG 或 PR)

Salary: $1650-$1740+ Yearly Bonus

薪资：$1650-$1740 + 年终花红

Working Hours: 7:00am to 3:00pm，*Saturday 7:00am to 11:00am

工作时间：早上 7:00 至下午 3:00, *星期六早上7:00至11:00

Working Days: Monday to Friday (5 days) or Monday to Saturday (5 & half days)

工作日：周一至周五 （五天）or 周一至周六 （五天半）

Location: Near Joo Koon MRT

地点：裕群地铁站附近

Job Description: 职位描述：

• Easy general cleaning of indoor premises
• 轻松进行场所的总体清洁
• Sweeping and mopping of floors
• 扫地和拖地
• Clean 3 x Small Toilet daily
• 每天清洁 3 个小间厕所
• Clearing of rubbish

Interested please call or WhatsApp +65 8768 5091

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as requiredenerate new drawings and modify existing drawings according to instructions for construction sequence related to utilities, traffic diversion, shallow/deep excavation works and related works.
• Prepare detailed civil and environmental design documentation and drawings, perform design calculations
• Accuracy and effectiveness in electronic drafting.
• Liaise with Project teams, auhorities, client, architects and various contractors to ensure project work is carried out smoothly Conduct site inspection and coordination on site
• Coordinate filing, storage and retrieval of both manual and electronic drawings.
• Maintain, support and operate associated plotters and printers.
• Ability to work effectively as part of a team or independently with minimal oversight.
• Explain drawing to construction teams and engineers to provide adjustments as required.
• Attend design, clients, architects and site meetings

Requirements:

• Must be familiar with construction sequence drawing and shop drawing with at least 5 years of working experience in the related field is required for this position.
• Bachelor Degree ,Civil Engineering
• Good familiarity with Autocad programs
• Good communication skills
• Team player with good inter-personal skills
• Able to work under pressure and meet tight deadlines
• Ability to work in dynamic environment and adapt to frequent project related changes
• We regret to inform that only shortlisted candidates will be notified.

Heavy vehicles driver

Prime move operations

Loading and unloading materials/goods/equipment others

Full spectrum of transportation requirements and assigned duties

Possess driving licences up to at least Class 4 in Singapore

OTE Certificate in Prime Mover (optional)

Clean traffic records

Team player with good interpersonal skills

Willing to work beyond contractual hours based on operational requirements

Job Description & Requirements

Job Description & Requirements

• Answers the telephone and provides exceptional customer service to internal and external customers.
• Drafts reports and correspondence.
• Orders supplies and equipment; maintains service contracts on office equipment.
• Attends meetings and takes meeting notes.
• Liaises with internal and external units to carryout job tasks.
• Assists managers and supervisors in developing policies and procedures.
• Provides front desk coverage as needed for backup.
• Ensures travel authorizations, accommodations, and conference registrations for employees.
• Audits/processes travel expense claims.
• Handles mileage reimbursement requests for supervision travel.
• Performs tracking and distributes monthly travel reports.
• Maintains accounts payable and accounts receivable records.
• Solves problems associated with vendors regarding shipments, billing, and statements.
• Monitors expenditures, processes payment requests for reimbursement; prepares purchase orders, purchase requisitions and ensures proper procedures for paying service providers, consultants, and contractors.
• Receives and audits invoices for accuracy and compliance and ensures prompt payment of departmental bills.
• Handles administrative tasks for faculty searches and staff recruiting.
• Handles event planning for meetings, professional development, and other department initiatives.
• Performs other related duties as assigned.

Job description

* As a HR generalist assisting in all HR and admin matters.

* Manage and record employees annual/sick leave.

* MOM work pass related matters including work pass application, renewal and cancellation and update for foreign worker's particulars.

* Update and maintain employee's date in hr system in accordance with company policies and MOM guidelines.

* Assist in staff on-boarding and off-boarding process and report regularly to the management.

* Handle employees enquires on all HR-related matters.

* Assist commercial work.

Requirements:

* Minimum Diploma in any discipline.

* Being able to speak Mandarin and English would be an added advantage.

* Good time management and prioritization capabilities, with the ability to multi-task and work with minimum supervisor and manager.

* Possess good communication and interpersonal skills.

• Ensure to achieve Company’s targeted yearly turnover.
• Ensures timely kick-off and proper handing-over of newly secured projects.
• Participates in project budget reviews and provide advice when required.
• Liaises with relevant parties to ensure all project disputes/ clarifications are settled.
• Attend site meeting, liaise with clients, subcontractors and suppliers and to ensure proper documentation. Sources, identify and secure new business opportunities for the Company.
• Ensuring all contractual requirements of all projects are fully complied with and responding to all contractual matters involving cost and time implications.
• Preparing tender documents and quantities, providing cost estimates, evaluating tender proposals, conducting project feasibility studies and managing cost information for all projects Assist on any contractual issues with client, subcontractor and consultants.
• Negotiate commercial terms conditions for new and existing contracts
• Involve project budgeting, controlling of cash flow and cost, processing of claims, contract payments and settlement of final accounts as well as maintaining proper documentation
• previous experience with façade would be advantage.
• Candidate must possess at least a Diploma, Professional Degree, Quantity Survey, Civil Engineering or equivalent.
• Able to speak English and Chinese.
• Required skill(s): AutoCad.
• Applicants must be willing to work in Gul Circle. 5.5workweek.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Responsibilities:

To maintence the facilities and machines such as the paper press machines and iron bar press machines

To maintence the electronic, and make sure it working

To keep the working site in clean and safe

To supervise maintenance technician to ensure daily tasks are carried out as planned

Carry out facilities operations and maintenance work.

Requirements:

At least 3 year’s relevant experience

Having relevant educational certificate is an advantage

Good attitude and self motivated is required

Can adapt the alternate shift

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

Benefits:

• Basic Salary up to $2,500 with yearly increment based on performance.
• Working pattern (4/3/4/3)
• Working timing 8:30am to 9:00pm
• Fixed attendance allowance of $200 per month
• Guaranteed AWS + OT pay eligible
• Performance bonus
• 1 year cash completion bonus
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Preventive Maintenance Technician (Semiconductor) located in Woodlands. Our clients are headquartered in the USA and established as the global key leader in the Semiconductor industry. You will be following the daily preventive maintenance schedule, managing the arrangement and logistics of new and old parts, and preparing and maintaining PM jigs and tools. Key tasks involve performing preventive maintenance on robots, such as cleaning and greasing parts, and replacing sensors, motors, and motor drivers. The role also requires the installation of vacuum valves, fore line pipes, and heater jackets. Additionally, the individual will assist tool owner engineers with technical activities like troubleshooting, modifications, installations, and de-installations in the fabrication area. Support for 6S practices, including parts cleaning, organization, labeling, and housekeeping, is also a significant part of the job.

Qualifications:

• Min. NITEC or Diploma in any Engineering field or equivalent certification
• Willing to do hands-on work and comfortable to be in cleanroom suit
• Work experience in semiconductor industry will be an added advantage

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible to set up and operate machines such as CNC machines in Milling, Grinding and Lathe; Electrical Discharge Machine (EDM); Surface Grinding; VT Lathe and various conventional machines and specialized equipment to perform machining operations. 

Essential Responsibilities:

• Set up and operate all types of conventional or CNC machines such as electrical discharge machine, laser machine, lathe, radial grinder, reciprocal grinder, milling machine, drilling machine, and specialized equipment to perform machining operation of the most complicated nature in the making of jigs, fixtures, tools, dies, gauges, test equipment and product parts, and their rework or modifications
• May follow a particular product through the machine shop using a variety of machine tools to complete the finished product
• Use all types of standard and special gauges, various hand tools
• Maintain pertinent records; work according to technical drawings and instructions
• Perform scheduled maintenance & housekeeping tasks
  

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read and understand the manufacturing operation sheets and standard operation procedures in English
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• Good mechanical aptitude
• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

About this role

To report to project manager for the M&E facilities maintenance projects

Job cope

Tender

To prepare tender for M&E facilities maintenance project

Pre project

Develops project objectives by understanding project requirement.

To plan project phases and manpower allocation.

To Determines project specifications by understanding customer technical and non-technical requirements and mandatory performance standards.

To prepare estimated project costing.

Project implementation

To understand project plan and specifications, time requirements n another project element and prepare project schedule

To monitor project progress

To Controls project plan by ad hoc review

To Controls project costs

To report to project director of project status reports by summarizing key information and recommend actions.

Requirement

· Diploma in M&E Engineering or equivalent.

· 3 relevant experiences in M&E works.

· 3 years M&E facilities operation project in large commercial building or education institution Construction industry

· 3 years M&E project management

Work location :Paya Labar

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position

We regret that only shortlisted candidates will be notified

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform Non-Destructive Testing and its related duties in accordance with the written instructions and specific calibration requirements.

Essential Responsibilities:

• Perform specific calibrations, NDT, and specific evaluations for acceptance or rejection of parts
• Correct interpretation and understand the inspection operation sheets and work instruction
• Organize, sort and prepare the parts for NDT inspection
• Load, unload, and operate either the real-time XR, UT or auto FPI line effectively
• Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets
• Ensure the equipment operation readiness always
• Assist the Engineer for any inspection evaluation and reporting
• Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents
• Prepare and clean parts before and/or after inspection
• Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements
• Perform scheduled maintenance & housekeeping tasks

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

• Well Established Company
• Basic $2000 to $3000 + AWS + VB
• Working location: Hougang / Site (Island Wide)
• 5 days’ work week (8:30am to 5:30pm)
• Communications equipment (Radio; Network; Wireless)
• Training Provided

Job Responsibilities:

• Carry out daily preventive maintenance and corrective maintenance of Radio, Network and Wireless equipment at site, including inspection, troubleshooting and replacement of faulty equipment
• Run tests and interpret results to ensure equipment is operating functionally
• Assist engineer in-charge to supervise site works
• Communicate with customers and various stakeholders of the project
• Supervise subcontractors for site works

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description & Requirements

• Ensuring the optimal performance and longevity of these critical equipment
• Involves a combination of technical expertise, customer service, and problem-solving skills.
• Installing and configuring medical devices at customer sites, ensuring proper integration with existing systems.
• Performing routine inspections, calibrations, and maintenance on medical equipment to prevent breakdowns and optimize performance.
• Diagnosing equipment malfunctions, identifying faulty components, and performing repairs or replacements.

Requirements:

• Min Diploma in Mechanical / Electrical Engineering or its equivalent
• At least 1 year related working experience in Medical / Healthcare/Laboratory product is a plus
• Able to commit standby and travel if required.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Responsibilities:

• Carry out routing daily checklist for critical equipment
• Supervise and supervision of regular vendor to carry out preventive maintenance.
• Must have knowledge and background of ACMV, chiller, cooling tower and air compressor.
• Monitoring of BMS (building monitoring system)
• Willing to learn security system such as CCTV and card reader access.
• Able to use computer to create power point, excel sheet and Microsoft work and outlook.
• First contact to response user request such as power trip, water leak, plumbing and sanitary, provide printer paper deliver, adjust door, light replacement, etc.
• To support event set up table, chairs, and PA system.
• Self-motivate and self-initiative to troubleshooting to sort out defeat to reinstate with shortest possible time.
• Able to manage and record documentation such as material inventory, check list etc.
• Carry out emergency generator and fire pump test run, PA system testing by weekly basic

Requirements

• NITEC in Engineering with at least 2 years in similar function.
• Able to work flexible working hours with over time if required. (OT will be paid for additional hours)