• · Responsible for conducting general maintenance and repairs on facility equipment and property structures.
• · Ensure that in the terminal relating to installation, either offshore or vessel or onshore production terminals are maintained and performed at optimum functionality.
• Execute tasks / activities, standard maintenance and repair work such as Preventive, Corrective maintenance project executions at site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals / Company standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Safety processes to achieve good safety records / results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute in maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or adhoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Support Maintenance Supervisor in ensuring that contractors or third party vendors execute maintenance tasks / activities at site effectively and efficiently
• · Ensure that contractors carry out tasks/activities that adhered to safety, health and environment regulations and Company standards
• Mentor, guide technicians, junior technician in maintenance activities and job competency
• Help out in the supervision of Capex project execution

Job Description:

• Responsible for the maintenance activities work task as direct instruction by the Mechanical Supervisor or Engineer (Maintenance) to maintain machines and equipment in the prescribed condition.
• Hands-on experience in servicing of rotating equipment like various types of pumps, chain and belt conveyors, mixers, blowers, agitators, fans and rotary valves.
• Good knowledge in Laser alignment and independently able to do.
• Perform daily preventative maintenance and troubleshooting of pump failures.
• Hands-on experience in mechanical seal assembly.
• Able to read and understand the P&ID.
• Timely close all work orders assigned by supervisor in CMMS.
• Ensures quality of work within the set time frame.
• Ensure to maintain adequate use of tools, supplies and parts to accurately repair all equipment.
• Follow job method of statement and risk assessment to perform the job task.
• Attend daily tool box meetings.
• Always follow and make sure plant safety rules and regulations.
• Participate in monthly safety committee meetings.
• Conduct routine 5S at maintenance workshop, store, substations and work area at site.
• Reporting to the mechanical supervisor on daily work activity.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• ITE or Diploma in Mechanical Engineering or equivalent is an advantage.
• At least 5 years of previous experience of working in static and rotating equipment in Chemical
• Process or Treatment Plant Industry.
• Good verbal and written communication skills.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using CMMS (Computerized Maintenance Management System) is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.

Successful candidate will be working in the main office located at 15 Tuas View Circuit Singapore 636968. Company transport is provided.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Ship Repair Engineer

Salary: $3,300 - $4,000

Working Days: Monday to Friday: 8:00 AM – 5:00 PM | Saturday: 8:00 AM – 12:00 PM

Working Location: Penjuru lane (Transport provided at Jurong East)

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Summary:

The Plumbing Installation and Repair Supervisor with heavy work is responsible for overseeing the installation, repair, and maintenance of plumbing systems in commercial, residential, and industrial settings. The role involves supervising a team of plumbers, ensuring the timely and efficient completion of plumbing projects, and maintaining a high level of quality and safety standards. This supervisor position requires hands-on experience with complex plumbing installations and repairs, as well as the ability to lead and direct staff in heavy physical labor environments.

Key Responsibilities:

Supervise Plumbing Operations

• Manage and supervise a team of plumbers, apprentices, and laborers during plumbing installation and repair projects.
  Ensure adherence to safety standards, building codes, and regulations on all plumbing projects.
  Assign tasks and monitor the progress of installations, repairs, and maintenance to ensure deadlines and quality standards are met.

Project Oversight

• Lead plumbing installations and repairs for large-scale or complex systems, including commercial, industrial, and heavy-duty residential systems.
  Plan and coordinate project schedules, materials, tools, and manpower needed for each project.
  Troubleshoot and resolve complex plumbing issues, including diagnosing and repairing leaks, pipe bursts, drainage problems, and water supply malfunctions.

Quality Control and Inspection

• Perform regular inspections to ensure that all plumbing work meets regulatory and safety requirements.
  Verify that installations are done according to design specifications, manufacturer instructions, and quality standards.
  Approve final plumbing work and sign off on completed projects.

Health, Safety, and Compliance

• Enforce safety standards and ensure compliance with local, state, and national plumbing codes.
  Conduct regular safety meetings and toolbox talks to educate staff on safety procedures, tools, and equipment handling.
  Ensure that personal protective equipment (PPE) is worn at all times and that the worksite is free of hazards.

Training and Development

• Train, mentor, and guide junior staff, including apprentices and new team members, on plumbing techniques, tools, and safety practices.
  Promote professional development opportunities for team members to improve skillsets and career progression.

Customer Service and Communication

• Interface with clients to discuss their plumbing needs, project timelines, and any special requirements.
  Maintain open communication with clients and stakeholders to ensure customer satisfaction and project updates.
  Address any complaints or concerns from clients regarding plumbing installations or repairs.

Equipment and Materials Management

• Oversee the procurement and maintenance of plumbing tools, materials, and equipment needed for projects.
  Ensure that all tools and equipment are in proper working order and perform regular inventory checks.

Record Keeping and Reporting

• Maintain accurate records of all work performed, including job details, materials used, time spent, and any issues encountered.
  Report on project progress, team performance, and any issues or delays to upper management.

Job Requirements:

Experience

• Minimum of 3-5 years of hands-on plumbing experience, with at least 2 years in a supervisory role overseeing installations and repairs.
  Experience working on heavy-duty plumbing systems in commercial, industrial, and/or large residential environments.
  Familiarity with plumbing software and/or project management tools is a plus.

Technical Skills

• In-depth knowledge of plumbing systems, including pipes, fittings, drains, water supply lines, valves, heating, and cooling systems.
  Ability to read and interpret blueprints, technical drawings, and plumbing codes.
  Skilled in the use of plumbing tools and equipment, including pipe benders, wrenches, threading machines, and power tools.
  Understanding of local, state, and national plumbing codes and standards (e.g., Uniform Plumbing Code, National Standard Plumbing Code).

Physical Requirements

• Ability to perform physically demanding tasks, including lifting heavy pipes and tools, bending, kneeling, and working in tight spaces.
  Ability to work in various weather conditions and environments (including outdoor and indoor settings).
  Must be able to work on your feet for extended periods and lift up to 50 lbs.

Leadership & Management Skills

• Strong leadership skills with the ability to motivate, guide, and manage a team effectively.
  Ability to manage multiple projects and tasks simultaneously while maintaining attention to detail.
  Excellent problem-solving skills and ability to troubleshoot complex plumbing issues.
  Strong interpersonal and communication skills for interacting with clients, staff, and management.

Work Environment

• Ability to work in both indoor and outdoor environments with exposure to varying weather conditions.
  Willingness to work overtime, weekends, or after-hours as needed to meet project deadlines or emergencies.

Physical Stamina and Strength

• Heavy Lifting and Physical Labor: The supervisor must be able to lift and carry heavy materials such as pipes, fixtures, and equipment that can weigh 50-100 lbs or more. This includes handling and maneuvering large sections of pipe or complex plumbing systems, sometimes in challenging positions or tight spaces.
• Endurance: The role requires long hours of physical labor, including bending, kneeling, climbing ladders, or working in confined spaces. Supervisors must have the stamina to work through physically demanding days, sometimes in uncomfortable or awkward positions.

Comfort with Working in Challenging Environments

• Outdoor and Indoor Work: Supervisors must be able to work in various conditions, including extreme heat, cold, or wet environments. Plumbing installations may require work at height (roof installations), in trenches, or in crawl spaces, so the ability to work in diverse environments and weather conditions is crucial.
• Confined Spaces: Some plumbing installations require working in small, tight areas (such as crawl spaces, attics, or behind walls), demanding flexibility and the ability to navigate in restrictive spaces for long periods.

Supervisory and Leadership Skills in High-Pressure Situations

• Team Management in Heavy Work: Supervising a team in physically demanding environments requires strong leadership skills. The supervisor must be able to direct a crew effectively, ensuring safety and proper technique while keeping morale high in challenging conditions.
• Delegating Tasks: Assigning tasks based on the team's physical strengths and expertise is essential. A supervisor should understand when to step in and take over tasks and when to allow team members to handle the heavy lifting themselves.
• Time and Resource Management: Managing heavy workloads requires clear scheduling, prioritization of tasks, and ensuring the proper equipment and materials are available for the crew. The supervisor must be able to coordinate heavy tasks efficiently without compromising safety or quality.

Problem-Solving Under Physical and Mental Stress

• Troubleshooting Complex Problems: Plumbing issues in heavy-duty environments often involve complicated systems or hard-to-reach components. Supervisors must be able to quickly identify and resolve issues in real time, balancing physical work with critical thinking.
• Decision-Making in High-Pressure Situations: When projects fall behind or unforeseen obstacles arise (e.g., difficult weather, damaged materials, unsafe conditions), the supervisor must remain calm and make effective decisions to keep the team on track.

Adaptability to Changing Situations

• Adjusting to Project Scope Changes: Heavy work often comes with unexpected challenges, such as changes in project scope, unanticipated complications, or supply delays. The supervisor must be able to adjust work plans and schedules without sacrificing safety or quality.

Summary of Key Abilities:

• Physical strength, stamina, and endurance for heavy lifting and long hours of manual labor.
• Ability to work in tough environments, including confined spaces and adverse weather conditions.
• Leadership skills to manage and motivate a team in physically demanding situations.
• Problem-solving abilities for troubleshooting and resolving issues quickly.
• Expertise in safety standards, ensuring compliance with safety protocols in physically challenging conditions.
• Experience with specialized tools and equipment necessary for heavy-duty plumbing tasks.
• Adaptability and mental toughness to work under pressure and in changing work conditions.
• Clear communication skills to ensure team coordination and safety.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

This is a contract role

Work location : Tanjung Pagar

Work hours:

a. Early shift: 7.15 am to 4.45 pm (Monday to Thursday);

7.15 am to 4.15 pm (Friday)

b. Late shift: 9.00 am to 6.30 pm (Monday to Thursday); and

9.00 am to 6.00 pm (Friday).

( weekly roatation)

Job Responsibilities;

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition

2.Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).

3.Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.

4.Daily, weekly and monthly inspection of key facilities, systems and critical areas.

5.Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.

6.Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).

7.Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.

8.Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.

9.Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.

10.Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.

11.Update information databases and breakdown record for engineering systems.

12.Any other facilities management works or related works that arise from the building operations and need.

Job Requirement :

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.
5. Independent worker and a good team player who is comfortable in working in a fast-pace and dynamic environment.
6. Good interpersonal skills with a customer-oriented mindset.

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Ship Repair Engineer

• Location: Penjuru lane ( Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: $3,300 - $4,000

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Roles and Responsibilities:

1. Performs total preventive maintenance (TPM) procedures as planned.

2. Performs inspections required by scheduled TPM or Work Order requests.

3. Performs basic troubleshooting on mechanical and hydraulic equipment.

4. Perform regular maintenance tasks at the facilities in accordance with the SOP.

5. Identify and pro-actively respond to maintenance and operation needs.

6. Support the Maintenance Supervisor (Mechanical) in performing the maintenance duties.

7. Allocate appropriate resources to execute the work order, follow up work order and ensure that resources are used to optimum effect.

8. Assessing the need of mechanical spare parts to avoid delays in TPM. Tool & instrument inventory/ maintenance.

9. Establish and run small workshop activities.

10. Identify and pro-actively respond to abnormality.

11. Trouble shoot equipment failure and execute TPM work.

12. Attend to equipment breakdowns and propose remedial actions and conduct follow up checks.

13. Work to incorporate efficient methods of maintaining new equipment or plant and involved in the installation and commissioning process.

14. Ensure all maintenance activities carried out are following relevant quality and environment policies, safety & environmental rules, and regulations requirements.

15. Supervise any external vendors providing maintenance services.

16. Support the maintenance Supervisor to develop and implement plant improvement plan.

17. Complete and maintain accurate, timely documentation and records as required by the Maintenance Supervisor.

18. Undertake any other duties as assigned by the management.

Requirements:

1. Minimum NITEC / Diploma in Mechanical Engineering or equivalent with 2 years of experience in a Power Plant environment.

1. Experience in Electrical field.
2. Possess good working knowledge of all operations in the plant.
3. Positive and highly motivated individual.
4. Possess can-do attitude.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Position title : Hotel Maintenance

Location: Bugis

Working days : 6 days ; 8 hours/day

Salary : $2500- $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Jobscope:

• Provides reactive planning for PM, CM activities i.e., developing efficient work plans (tasks, sequences, parts/materials, craft/manpower and resources) for PM/corrective maintenance plans and carry out schedule review of 30/90 days
• Issue soft week and hard week schedules, maintain effective loading and utilization of craft, coordinates maintenance work related activities for the equipment’s in plant.
• Compliance to HSE standards and requirements
• Able to support the project in pre-com and commissioning activities such as verifying site check and witness commissioning activities.
• Generate spare parts list for the equipment’s and work with Reliability for critical spares, IT team to transfer the list into BOM list, ensure physical qty and SAP qty are in account
• Carry out site checks & planning of work orders end to end process
• Responsible for material procurement and availability prior to execution of all PM/CM works.
• Ensure PM/CM plans are scheduled accordingly and executed before their due dates.
• Assist in budget planning based on past years cost trending.
• Contribute and participate actively in site reliability improvements.
• Use Computerized Maintenance Management System (CMMS) in compliance with the global maintenance and business processes

Requirements:

• Degree/Diploma or equivalent, preferably in Mechanical Engineering.
• At least 5-10 years relevant field experience as plant engineer or equivalent. Preferably with Mechanical Engineering background.
• Relevant knowledge in: HSE Performance Management, Risk Management, Plant Operations, Reliability & Integrity, Process Technology, MOC Management, Cost/Budget, and RCA
• Knowledge of using symphony tool in SAP for scheduling maintenance activities
• Willing to work in Jurong Island

To apply, please visit www.gmprecruit.com and search for Job Reference: 25022

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R1109239

Maintenance Technician

5 Day (Mon – Fri): 8am-5.30pm + OT

Salary: $1,600 - $2,200 + AWS + Allowance + VB

Location: 1 Senoko South Road Singapore 758069 （Sembawang Area）, transport provided

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Must be willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description:

- Perform preventive maintenance (PM) job as per planned schedule

- Support production team with corrective maintenance (CM), troubleshooting and repair work

- Carry out ad-hoc technical related duties as required

- Maintain 5S/ housekeeping as required

Job Requirements:

- NITEC/ Higher NITEC in Mechanical/ Electrical/ Electronic Engineering or related discipline

- Willing to Working at height (climbing up and down of vehicles)

- Good interpersonal skills, proactive and work well with others

- Able to trouble shoot electrical & hydraulic system will be an advantage

- Prefer candidate with Class 3 driving licence

• Basic up to $4,200, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Minimum 5 years of experience in a related field, with at least 3 years in facilities/building maintenance.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Class 3 driving license is advantageous.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Recruitment Pte Ltd | EA License No.: 16C7954

Tay Shiong Luan | EA Personnel No.: R23115166