• Assist in M & E services maintenance
• Supervision of contractors in additions and alterations
• Supervision of building maintenance works, cleaning services, security, landscape and pest control services
• Diploma in Engineering/ Building Management/ Building Services/ Real Estate
• Minimum 3 years of working experience in building services maintenance work
• Preferably a certified Fire Safety Manager
• Able to communicate with all levels
• Computer literate
• Service-oriented mindset
• Able to commence work immediately or within short notice will be an added advantage

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Able to perform corrective Instrumentation and Controls Maintenance for all Equipment located in Banyan CCP3 and BWWT as assigned by I&C Engineer / Supervisor.

Key Roles and Responsibilities

• Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing and calibration of Instrumentation and Controls Equipment.
• Conduct disassembling and assembling of Instrumentation and Controls Equipment and of Gas turbine, Steam Turbine, Generator, HRSG, BOP and BWWT for repairs/rehabilitation.
• Hands on maintenance and troubleshooting experience of ALSPA DCS control system, Field Instruments such as transmitters & gauges, electronic cards etc.
• Assist the Maintenance I&C Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.
• Assist the Maintenance I&C Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant
• Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant.
• Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities
• Withdraw and prepare spares from warehouse for job execution.
• Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Qualification, Skills and Experience

• Min ITE or diploma in engineering field
• Preferably minimum 3 years of experience in relevant Maintenance fields in a Power Plant or Petrochemical Industry

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description & Requirements

• Ensuring the optimal performance and longevity of these critical equipment
• Involves a combination of technical expertise, customer service, and problem-solving skills.
• Installing and configuring medical devices at customer sites, ensuring proper integration with existing systems.
• Performing routine inspections, calibrations, and maintenance on medical equipment to prevent breakdowns and optimize performance.
• Diagnosing equipment malfunctions, identifying faulty components, and performing repairs or replacements.

Requirements:

• Min Diploma in Mechanical / Electrical Engineering or its equivalent
• At least 1 year related working experience in Medical / Healthcare/Laboratory product is a plus
• Able to commit standby and travel if required.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Responsibilities:

• Carry out routing daily checklist for critical equipment
• Supervise and supervision of regular vendor to carry out preventive maintenance.
• Must have knowledge and background of ACMV, chiller, cooling tower and air compressor.
• Monitoring of BMS (building monitoring system)
• Willing to learn security system such as CCTV and card reader access.
• Able to use computer to create power point, excel sheet and Microsoft work and outlook.
• First contact to response user request such as power trip, water leak, plumbing and sanitary, provide printer paper deliver, adjust door, light replacement, etc.
• To support event set up table, chairs, and PA system.
• Self-motivate and self-initiative to troubleshooting to sort out defeat to reinstate with shortest possible time.
• Able to manage and record documentation such as material inventory, check list etc.
• Carry out emergency generator and fire pump test run, PA system testing by weekly basic

Requirements

• NITEC in Engineering with at least 2 years in similar function.
• Able to work flexible working hours with over time if required. (OT will be paid for additional hours)

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

• Well Established Company
• Basic $2000 to $3000 + AWS + VB
• Working location: Hougang / Site (Island Wide)
• 5 days’ work week (8:30am to 5:30pm)
• Communications equipment (Radio; Network; Wireless)
• Training Provided

Job Responsibilities:

• Carry out daily preventive maintenance and corrective maintenance of Radio, Network and Wireless equipment at site, including inspection, troubleshooting and replacement of faulty equipment
• Run tests and interpret results to ensure equipment is operating functionally
• Assist engineer in-charge to supervise site works
• Communicate with customers and various stakeholders of the project
• Supervise subcontractors for site works

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Operation Technician, Team Leader (Chemical Plant/Incinerator)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for an Aerospace Component Repair & Design Development Engineer on a 12-month contract to start with. There is a potential to extend further based on individuals' performance and business needs.

• Work location: Changi Airport

Roles and Responsibilities:

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
• Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS13000 and Rolls-Royce’s SABRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce, and ensure follow through till approval is obtained, and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source control Repair schemes, and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.

Technical Expertise

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes.
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Commodity knowledge in Nozzle Guide Vanes and Stator Vanes repair is preferred.

Argyll Scott Consulting Pte Ltd

• Basic up to $4,200, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Minimum 5 years of experience in a related field, with at least 3 years in facilities/building maintenance.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Class 3 driving license is advantageous.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Recruitment Pte Ltd | EA License No.: 16C7954

Tay Shiong Luan | EA Personnel No.: R23115166

• Salary: $3,200-$4,000
• Mon to Friday 8am to 5pm
• Location: Penjuru Lane (Transport provided @Jurong east)

Roles & Responsibilities

• Prepare correspondence emails, letters, statements, documents, and reports
• Draft company's policies, regulations, rules, and supervise the implementation.
• Manage filing and document control for company policies, regulations, SOPs, contracts & agreements, reports, and other administrative documents.
• Possess legal knowledge and liaise with lawyers when required.
• Fully in charges the administration department and manage administrative issues for the company.
• Process administrative work related to government authorities, associations, the company’s head office, customers, and visitors.
• Handle administrative and logistical arrangements for customers and visitors.
• Organize events by coordinating with relevant departments for planning and implementation.
• Collect training requirements from relevant departments, prepare the company training plan, and supervise its implementation.
• Collect and arrange daily and weekly activities for company management.
• Manage vehicles and drivers for the company.
• Provide backup support for colleagues in IT and HR positions.
• Undertake any other ad-hoc tasks and duties as assigned by superiors.

Job Requirements

• Min 2 years of working experience in administration

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Car Electrician (repair Truck wiring)
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $2,000 + OT + Meals + Accommodation + Transportation + tea break
• Duration: Permanent Role

Key Responsibilities

• Diagnose and repair electrical issues in trucks, including wiring, lighting, and other electrical components.
• Inspect and troubleshoot electrical systems in trucks to ensure proper functionality.
• Repair or replace faulty wiring, fuses, switches, and electrical systems.
• Install new electrical systems and components as needed, following safety guidelines.
• Use electrical diagnostic tools and schematics to identify issues quickly and efficiently.
• Work closely with other technicians to ensure trucks are maintained and repaired on schedule.
• Maintain a clean and organized work area, ensuring compliance with safety regulations.

APPLY NOW!!!

• Prior experience working as a Car/Truck Electrician is essential, specifically in repairing truck wiring and electrical systems.
• Strong knowledge of truck electrical systems, wiring, and diagnostic tools.
• Relevant certifications in automotive electrical repair are a plus.
• Ability to identify and fix electrical faults efficiently with great attention to detail.
• Meals provided daily.
• Accommodation provided.
• Free company transport between the dormitory and workshop.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69947 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Job:

• Manage all business activities in the designated area within budget to ensure reliability, costs and profitability meet the yearly target
• Work together with Repair Sales Representative to Ensure all possible traditional and non-traditional repair and upgrade opportunities are advised to the customer, followed-up until successful sales and implementation
• Plan and optimize the staffing needs in the designated area, including route organization and workload allocation to continuously improve fulfilment effectivity and efficiency

The Requirement:

• Min Diploma / Degree in Engineering
• Min 5-8 Years of relevant working experience from Contruction or Engineering industry

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

The Maintenance Technician is responsible for assisting in the maintenance of mechanical or electrical installations and equipment. Provides general assistance in the maintenance of the company’s plant, machinery, building and associated facilities. Carries out routine inspection and servicing of the company’s mechanical and electrical installations, building and associated facilities, refrigeration plants and air-conditioning units, plumbing and sanitary systems, machinery and equipment. Attends to complaints from users and carries out minor repairs. Monitors and keeps daily records of readings on various gauges, thermometers, pumps and other equipment and makes the necessary adjustments to correct any malfunctioning.

· Equipment in a safe and operational state of readiness at all times in order to fulfil daily operation requirements.

· Carry out preventive maintenance checks on allocated machines

· Carry out troubleshooting on the allocated machines to find the root cause and repair the defective machines to minimize downtime.

· Actively works on ongoing review, improve & monitor manufacturing capabilities to improve operational performance and efficiencies.

Requirements:

• ITE/Diploma in Electrical/ Mechanical related will be preferred
• Able to read, write and communicate in English
• Proficient in Microsoft Office preferred - outlook, excel & word
• Attention to detail and accuracy
• Has ownership and team player value
• Has Experience Industrial Electrical
• Clean up the work area after completion of the task

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are always on the lookout for a talent with a growth mindset – are you the one? We are looking for a Maintenance Planner with a main responsibility in maintenance planning support towards long term service agreements in Marine 4-stroke portfolio. The preferred location for this position is in Pandan Cresent, Singapore.

Your role and responsibilities:

As a Maintenance Planner your work will include providing quarterly reports, budgets & scope of work for overhauls, following up on performed services and updating the supporting software tools accordingly. The tasks can also be adjusted based on your individual skills and interests. You’ll be working as a part of energetic maintenance management team with diverse expertise.

Requirements for the position:

• Diploma/B.Sc. in Mechanical or Productional engineering or equivalent

• Theoretical 4-stroke diesel engine knowledge

• Basic IT-software skills (e.g. office 365)

• Good co-operation, teamwork and communication skills

As an ideal candidate you might also have:

• Field service experience on Marine 4-s engines

• Knowledge of CMMS(Computerized Maintenance Management System), PMS(Plan Management System) tools

• Extrovert with advanced communicational skills

• Understanding of contractual and financial business

• Understanding of maintenance planning

• MNC Company
• Salary $2500 - $3000 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm
• Training provided for those without/lesser experience

Job Responsibilities:

• Responding to calls for scheduled and unscheduled maintenance service request in accordance with the Company’s Service Agreement
• To trouble-shoot and repair any system abnormality during maintenance service call at the customers’ premises
• To supervise and control sub-contractors’ work quality for maintenance work
• To render technical support to the other departments’ staff
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Higher Nitec and/or Nitec in Electronics and/or Electrical Engineering or relevant field
• Possess Class 3 Driving License will be an added advantage
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

about the company

Our client is a leading global tank storage company serving primarily the manufacturing and energy markets. They have facilities and terminals globally and are now looking for a reliable and experienced Maintenance Manager to lead their maintenance team.

about the job

• Responsible for leading and managing the maintenance function in the terminal operations to ensure efficient and effective maintenance of asset reliability and integrity.
• Lead department in the overall installation, maintenance and repairs of all terminal assets, necessary for the continuity of operations and the safety of terminal personnel.
• Manage maintenance contractors and service providers
• Plan and manage the department's resources and budget to meet the company's objectives.
• Contribute to the development of annual and longer-term business plans, forecast performance against business key performance indicators, develop business case for new projects and estimate financial and resources required
• Manage department resources on supporting terminal or company on ad hoc projects and activities
• Monitor maintenance on site is carried out in accordance with safety, health, environment and loss preventive policies, rules, regulations and according to company’s standards.
• Drive relevant processes to ensure execution of projects and identify continuous improvement opportunities
• Lead maintenance engineers in project management of CAPEX projects or commercial inquiries
• Manage Sustaining and Service CAPEX projects.
• Provide leadership and manage people competencies and development

job requirement

• Diploma/Degree equivalent in engineering
• Minimum 10 years of relevant maintenance experience in oil terminal storage environment
• Knowledge of safety, health and environment practices
• Demonstrated leadership and people management skills
• Positive stakeholder management capabilities with strong communications skills
• Project Management skills
• Able to communicate in Bahasa Indonesia,Malay fluently due to the need to serve Bahasa Indonesia-speaking customers / stuffs who cannot speak english
• Able to be based permanently around Batam area (Mon to Fri)

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.