• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Jobscope:

Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability

• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• Ensure all maintenance activities comply with company’s EHS policies.

Requirements:

• Degree/Diploma in mechanical engineering or the equivalent
• 3-5 years of experience in Plant & facilities in chemical plant.
• Basic understanding of maintenance technology manufacturing process plant environment.
• Demonstrated ability to adjust contractors independently and effectively.
• Good interpersonal and communication skills

To apply, please visit www.gmprecruit.com and search for Job Reference: 24048

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R1109239

Responsibilities:

• Coordinate with Developer / Management Agent / Consultants’ Representatives to schedule inspection and sequence of work for defects rectification.
• Carry out inspections to identify root cause of defects issue and make suitable recommendation for rectification works.
• Manage daily site operations – coordinate with subcontractors and lead a team of workers to carry out works according to approved drawings, instructions, or approved method.
• Ensure that all site works are complying with safety standards and processes.
• Carry out inspection to ensure quality and acceptability of all works.
• Ensuring that the works are carried out to schedule and keep proper records to close on defects cases with stakeholders.
• To report on the progress and quality of rectification works on site.

Requirement:

• With relevant trade Diploma / Certificates or working experiences.
• Proficient in MS Office Applications (Word, PowerPoint, and Excel).
• Possesses Safety Supervisor Certificate and knowledgeable on-site safety requirements.
• Able to communicate effectively with Client, Homeowners and Subcontractors.
• Strong in organization and coordination of site work, with respect to management of workers and Subcontractors.
• Good technical knowledge of building trades and acceptable practices, as well as defects rectification methodology is essential.
• Able to work independently and deliver results within stipulated deadlines.

Benefits Summary:

• Up $4000 + Allowance + Benefits
• 5 Days work week
• Working Location: Tuas

Responsibilities:

• Regular inspection to ensure machines equipments are in optimal performance
• Conducting preventing maintenance and servicing for the machines and equipment
• Track, monitor, and manage its spare parts inventory system at all times
• Maintain the documents records
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

TeamWork is an independent international group, founded in 1999 in Geneva by its current CEO Mr. Philippe Rey-Gorrez. As a a strategic partner in digital transformation, TeamWork is involved in four core businesses: Business Consulting, SAP Business Solutions, Salesforce, Data Analytics and Technology Platforms.

Recognized by its clients for its expertise and experience, TeamWork supports both major international accounts and SME and has nearly 1,100 employees spread over 23 international locations (Switzerland, France, Germany, Luxembourg, Vietnam, Singapore, China, India, Canada, United States of America).

In the context of constant growth of our local workforce, and in order to support our international clients on large-scale projects in Southeast Asia, we are currently looking for a SAP PM (Plant Maintenance) Senior/Lead Functional Consultant who will reinforce our regional team.

The profile must be autonomous, rigorous management and personal organization, with recognized and appreciated relational skills.

Job Description:

• Must have Implementation & support experience of SAP Plant Maintenance (PM)

· Responsible for the system Requirement study, Solution design, System Configuration, Testing, User Training, Data conversion, Documentation, System integration as per best practice of SAP PM

• Corrective Maintenance Process, Performance, Preventive maintenance Process, Time Based preventive Maintenance Process, Refurbishment Process, Calibration Process

• Master data viz, PM Material, Assembly, Serial Number, BOM, Maintenance Task List, Measuring Point, Counters, PM Work centres, and Maintenance plans.

• Broad Interface interactions with Business Process

• Successful implementation of change request & projects

• Strong Leadership & communication Skills Education/ Experience Requirements

• Prefer interface experience in IBM Maximo

Qualifications /Skills & Requirements

• Candidate must possess at least bachelor’s degree/Post Graduate Diploma/Professional Degree

• Minimum 5-7 Years of SAP PM experience as a SAP Consultant Skills, Abilities & Knowledge with preferred ECC and S4HANA experience (not required)

• Very good business knowledge, process-related in Plant Maintenance, It Service Management Knowledge

• Business Fluent English, MS Office, MS PowerPoint, MS Projects, ABAP debugging

• Project Management experience is added advantage.

• Experience working in a global environment.

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

What a Repair & Maintenance Technician does at HP:

• Provide investigation and troubleshoot automated manufacturing equipment/process failure.
• Plan and execute timely & effective maintenance programs.
• Study machine data, analyze and implement corrective/preventive action to improve equipment reliability, utilization & yield performance.
• Maintain required level of spares and proper documentation on all assigned equipment.
• Adhere to HP policy including ISO 9K/50K & EHS&S 14K/18K programs.
• Lead/participate in process development & simplification project to improve product quality & workflow.

Individuals who do well in this role at HP, usually possess:

• Diploma in Electrical / Mechanical / Electronics/ Mechatronic Engineering or Higher Nitec with 2 years relevant experience.
• Good teamwork, communication, and interpersonal skill.
• Excellent analytical troubleshooting skills and creative thinking.
• Independent and able to adapt to dynamic operation environment.
• Effective planning, execution, and issue resolution
• Adapt to Smart Manufacturing (Industry 4.0) concept to optimize manufacturing process and increase productivity through innovation.
• This is a 2 year renewable contract.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

Primary Responsibilities:

• Operate semiconductor fabrication equipment

• Clean room environment

• Perform wet chemical processes

• Comply with quality systems procedures

• Read and follow written and verbal instructions

• Meet expectations for attendance and punctuality

• Work with solvents, basis, and acids

• Log process information into computers

• Performs other duties as may be assigned

• Training will be provided

Job Requirements:

• 'O' / 'N' / ITE qualifications

• Willing to learn and display a POSITIVE attitude

• Must be patient, observant and willing to listen to instructions being

assign to him/her

• Must be neat and tidy

Shift Pattern: Rotating Shift (optional)

Ability to communicate in Chinese is a plus

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

Primary Responsibilities:

• Operate semiconductor fabrication equipment

• Clean room environment

• Perform wet chemical processes

• Comply with quality systems procedures

• Read and follow written and verbal instructions

• Meet expectations for attendance and punctuality

• Work with solvents, basis, and acids

• Log process information into computers

• Performs other duties as may be assigned

• Training will be provided

Job Requirements:

• 'O' / 'N' / ITE qualifications

• Willing to learn and display a POSITIVE attitude

• Must be patient, observant and willing to listen to instructions being assign to him/her

• Must be neat and tidy

Shift Pattern: Rotating Shift (optional)

Ability to communicate in Chinese is a plus

Benefits Summary:

• Up $4000 + Allowance + Benefits
• 5 Days work week
• Working Location: Tuas

Responsibilities:

• Regular inspection to ensure machines equipments are in optimal performance
• Conducting preventing maintenance and servicing for the machines and equipment
• Track, monitor, and manage its spare parts inventory system at all times
• Maintain the documents records
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Assistant Officer (Maintenance Part Sales Department)

Working Days: 5 days (8am - 6pm)

Office Location: Jurong East

Salary: $2500-$3200

other benefits: flex benefits $100-$300/year + transport allowance $50-$120/month + will state exact amount of confirmation increment $50 - $200

Requirements:

• Basic administrative skills
• Experience in negotiation with external customers / sales / customer service / analyzing data

Job Scope:

1. Make estimates for maintenance parts sales.
2. Prepare necessary quotations and negotiate with customers.
3. Update and monitor progress of sales status
4. Prepare necessary reports relating to quotation and sales works.
5. Issue job instructions and other relevant documents for the works.
6. Assist in developing and maintaining software for sales work.
7. Co-ordinate with other departments on matters relating to works.
8. Report to superior on all matters relating to the section.
9. Carry out any other duties as assigned by the superior.
10. Keep proper records and filling of works carried out.
11. Ensure all data and information are kept in confidentiality.
12. Ensure compliance to the Environmental Policy, reduction of waste and prevention of pollution.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Assistant Officer (Maintenance Part Sales Department)

Working Days: 5 days (8am - 6pm)

Office Location: Toh Guan Road, Jurong East

Salary: $2500-$3200

other benefits: flex benefits $100-$300/year + transport allowance $50-$120/month + will state exact amount of confirmation increment $50 - $200

Requirements:

• Basic administrative skills
• Experience in negotiation with external customers / sales / customer service / analyzing data

Job Scope:

1. Make estimates for maintenance parts sales.
2. Prepare necessary quotations and negotiate with customers.
3. Update and monitor progress of sales status
4. Prepare necessary reports relating to quotation and sales works.
5. Issue job instructions and other relevant documents for the works.
6. Assist in developing and maintaining software for sales work.
7. Co-ordinate with other departments on matters relating to works.
8. Report to superior on all matters relating to the section.
9. Carry out any other duties as assigned by the superior.
10. Keep proper records and filling of works carried out.
11. Ensure all data and information are kept in confidentiality.
12. Ensure compliance to the Environmental Policy, reduction of waste and prevention of pollution.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Ship Repair Supervisor

$ 2,700 - $ 3,500 (Negotiable based on experience)

Penjuru Lane

Transport provided @Wesgate taxi stand

5.5 days 8am - 5pm (Monday to Friday)

8am - 12pm (fixed Saturday)

Job scopes:

• To fulfil ship repair jobs afloat or shipyard
• Carrying out maintenance, service and repair of all mechanical equipment (Diesel Engines, pumps, gearboxes, couplings, alternators, hydraulic system, deck machinery etc) on board all vessels as assigned.
• Troubleshooting all the mechanical equipment on board vessels.
• Jobs involved engine equipment removal, reinstallation, servicing, repair and reconditioning, commissioning activity.
• Ensure adequate maintenance of tools, equipment and cleanliness in the workshop.
• Managing team and delivering ship / shipyard schedule required.
• Carrying out any retrofit job for new equipment installation on board vessels.
• VSCC meeting, permit to work system, and trade certificates are required
• Managing of workforce and job, writing job completion report, submitting cost evaluation, liaise with owners representative, and always have to follow company SOP.
• Any other duties as assigned by ship repair manager and management.

Requirements:

• Diploma/Certificate in Marine Engineering or equivalent.
• At least 3 years relevant working experience.
• Able to read drawings and write service reports.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

Benefits Summary:

• Up $4000 + Allowance + Benefits
• 5 Days work week
• Working Location: Tuas

Responsibilities:

• Regular inspection to ensure machines equipments are in optimal performance
• Conducting preventing maintenance and servicing for the machines and equipment
• Track, monitor, and manage its spare parts inventory system at all times
• Maintain the documents records
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

about the company

Our client is a global chemicals company focused on the manufacturing and distribution of petroleum additives. They now have exciting opportunities for a Maintenance Engineer to join their dynamic Maintenance team during an exciting time in their development.

about the job

Reporting to the Maintenance Manager, you will plan and organize the maintenance of plant equipment, systems and building facilities together with the following responsibilities:

• Plan, schedule and ensure all maintenance work orders are carried out in a safe and timely manner.
• Perform duties as defined in Leader Standard Work.
• Ensure that technicians and contractors comply with all EHS protocol, statutory regulations, and standard work.
• Ensure all critical and statutory equipment are maintained according to regulations.
• Ensure maintenance records are properly archived in a computerized maintenance management system.
• Report any deviations to EHS protocol, statutory regulations, and standard work/operating procedures.
• Periodically review and update maintenance tasks, spare parts inventory level, operating procedures, risk assessments.
• Drive LEAN manufacturing initiatives to improve plant reliability, productivity, and cost savings.
• Support the execution of capital projects

job requirement

• Bachelor’s Degree/Diploma in Mechanical, Electrical, Chemical Engineering
• Experienced in a Chemical or Process Plant environment (minimum 1 year for degree holders and minimum 10 years for diploma holders)
• Good working knowledge of Maintenance and Reliability Best Practices
• Proficient in Microsoft Office Applications and Computerized Maintenance Management System
• Willing to work in the West (Tuas/Pioneer)

If you are interested in the position, kindly apply directly or send your CVs to yiling.tan@randstad.com.sg.

We regret that only shortlisted candidates will be contacted.

EA: 94C3609 / Reg: R21103172

Job Summary: The IT Operation and Maintenance Director is a senior leadership role responsible for overseeing, strategizing, and managing the operation, maintenance, and support of an organization's IT infrastructure, systems, and services. This position plays a pivotal role in ensuring the reliability, availability, and optimal performance of IT assets, while also providing leadership for the IT support functions. The IT Operation and Maintenance Director typically reports to the Chief Information Officer (CIO) or Chief Technology Officer (CTO).

Key Responsibilities:

1. Strategic Planning:Develop and implement long-term strategies for IT operation and maintenance that align with the organization's overall business objectives.
Establish and manage budgets, resource allocation, and performance goals for IT operation and maintenance.

2. Operation and Maintenance:Oversee the daily operation, maintenance, and performance monitoring of IT systems, networks, data centers, and other infrastructure components.
Ensure the highest level of system availability and performance while minimizing downtime and disruptions.

3. Team Leadership:Lead and manage the IT operation and maintenance teams, which may include system administrators, network engineers, helpdesk/support staff, and other IT professionals.
Recruit, mentor, train, and evaluate team members to maintain a high-performing and collaborative workforce.

4. Problem Resolution:Identify and resolve complex IT issues, incidents, and service disruptions through effective incident management and problem-solving processes.
Implement efficient troubleshooting and escalation procedures.

5. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
Maintain accurate inventories, ensure compliance with licensing agreements, and optimize asset utilization.

6. Security and Compliance:Establish and enforce IT security policies, procedures, and best practices to safeguard data and systems.
Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.

7. Disaster Recovery and Business Continuity:Develop and maintain robust disaster recovery and business continuity plans to protect against data loss and ensure the continuity of critical operations.
Regularly test and update these plans to accommodate changes in the IT environment.

8. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
Negotiate contracts and service-level agreements (SLAs), ensuring adherence to agreed-upon terms and high service quality.

9. Performance Monitoring:Implement comprehensive performance monitoring and reporting tools to proactively detect and address performance issues.
Analyze performance metrics and recommend improvements to enhance system and network performance.

10. Documentation and Knowledge Sharing:

• Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
• Develop operational manuals and encourage knowledge sharing within the team to enhance operational efficiency.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.

2. Experience: A minimum of 10-15 years of experience in IT operations and maintenance, with at least 5-7 years in a leadership or directorial role, is typically required.

3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a significant advantage.

4. Leadership and Communication: Strong leadership, team management, and communication skills are essential for effectively leading diverse IT teams and collaborating with various stakeholders.

5. Problem-Solving and Strategic Thinking: Strong analytical and problem-solving abilities to address complex IT issues and make strategic decisions that align with organizational goals.

6. Regulatory Knowledge: Understanding of relevant industry regulations, compliance requirements, and the ability to implement and maintain compliance measures.

7. Project Management: Proficiency in project management methodologies and tools is essential for ensuring the successful delivery of IT infrastructure projects.

The IT Operation and Maintenance Director plays a critical role in maintaining the integrity and reliability of an organization's IT infrastructure. Their strategic vision, leadership, and operational expertise are vital for ensuring the consistent availability, security, and performance

Job Summary: The IT Operation and Maintenance Manager is a critical role responsible for overseeing the ongoing operation, maintenance, and support of an organization's IT infrastructure and systems. This position plays a crucial role in ensuring the reliability, security, and performance of IT assets and services. The IT Operation and Maintenance Manager typically reports to the IT Director or Chief Information Officer (CIO).

Key Responsibilities:

1. Operation and Maintenance:Manage the day-to-day operation, maintenance, and monitoring of IT systems, networks, and infrastructure.
Ensure that IT systems and services are available and performing optimally, minimizing downtime and disruptions.

2. Team Management:Lead and supervise the IT operation and maintenance team, including system administrators, network engineers, and support staff.
Recruit, train, and evaluate team members to maintain a high-performing and cohesive workforce.

3. Problem Resolution:Identify and resolve IT issues and incidents promptly to minimize impact on business operations.
Implement effective incident management and problem-solving processes.

4. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
Ensure accurate inventory and licensing compliance while optimizing asset utilization.

5. Security and Compliance:Implement and enforce IT security policies, procedures, and best practices.
Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.

6. Disaster Recovery and Business Continuity:Develop and maintain disaster recovery and business continuity plans to safeguard against data loss and ensure continuity of operations.
Conduct regular testing and updates of these plans.

7. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
Negotiate contracts, service-level agreements (SLAs), and ensure service quality.

8. Performance Monitoring:Implement monitoring and reporting tools to proactively detect and resolve performance issues.
Analyze performance metrics and recommend improvements.

9. Documentation:Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
Create operational manuals for team reference.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.

2. Experience: A minimum of 5-7 years of experience in IT operations and maintenance, with at least 2-3 years in a management or supervisory role, is usually required.

3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a plus.

4. Leadership Skills: Strong leadership and team management skills, with the ability to motivate and lead a diverse IT team.