Maintenance / Service Technician

Summary:

The selected candidate shall be able to read and work from blueprints, parts lists, and assembly protocols. There will be use of parts washers, freezers, ovens, cranes, presses, torches, hand, and power tools. The selected candidate will be responsible for disassembling gear drives, inspecting disassembled parts, write up and reporting failed parts, and advise on replacement parts.

Required to go on field service calls within Southeast Asia to inspect, repair, install, and commission gear drives and other transmission parts at customer sites upon the request of Service Supervisor.

Responsibilities:

• Inspection, service, and maintenance on gear drives which include bevel, helical, planetary, mixer drive, mill drive, screw extruder units, hoist and swing gear drives, variator drives, marine drives, couplings and their subassemblies

• Direct interaction and coordination with customers’ site personnel

• Troubleshoot errors and advise on corrective action

• Self-motivated and able to work a flexible schedule as required (weekends may be required)

• Ability to analyse and resolve issues independently and efficiently.

• Write customer facing reports, which include Technician’s camera or bore scope photographs

• Create expense reports

Required Experience:

• 10 years prior experience in power transmission, heavy equipment assembly, marine, or wind gearbox applications

• Equivalent of 5 years’ experience specifically in field service operations

• Knowledge and experience with blueprints, metric system, work standards, ISO and quality documentation, basic gearing and bearings

• Mechanical skills

• Experience with Microsoft Office, Outlook, Word, and Excel

• Physically and mentally able to work suspended from heights and in confined spaces

• Flexible travel schedule

• High school diploma or equivalent

• Must meet body weight restrictions that allow safe use of ladders and equipment as required by the safety regulations

Knowledge/Skills, Education, and Experience:

• Hands on work experience as a Field Service or Wind Technician on a Wind Farm

• Relevant work experience e.g. electrical, mechanical, hydraulic, maintenance/troubleshooting in a military, industrial, or automotive industry

• Lathe and surface grinder experience

• Crane and rigging experience necessary

Interested applicants, please submit your resume to: [email protected]
Abelene Marianne Kang Mrs Abelene Marianne Rozario R2089914
EA License No: 02C3423 Reg No: 199505951H

Job Summary

The Maintenance Technician is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technicia is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair variety of equipment’s including mechanical and electrical systems.

b) Diagnose and troubleshoot a range of basic to complex problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Monitor and maintain building systems such as lighting, and security systems.

b) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

c) Coordinate and the ability to perform a range of basic to complex repairs and adjustments to maintain a safe and well-maintained working environment.

d) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Calibrate and fine-tune equipment to ensure accurate operation and optimal performance.

c) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide training for new and unskilled technician

b) Mentor and train junior technicians

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus.

• Proven min 3 years’ experience as a Maintenance Technician or similar role in electrical related repair ( gear box , motor , pump ) in manufacturing environment

• Proficiency in using hand and power tools.

• Strong diagnostic and problem-solving skills.

• Ability to read technical manuals, schematics, and diagrams.

• Strong attention to detail and organizational skills.

• Excellent communication and teamwork abilities.

• Knowledge of safety protocols and regulations.

• Flexibility to work on-call or during off-hours, if necessary.

• Proficient in Microsoft Excel, Words, PowerPoint, familiar with CMMS

• Good communication skills. This role may need to collaborate with Chinese environment people .

• Good report writing skills.

• Proactive work attitude.

Job Summary

The Maintenance Technician is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technicia is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair variety of equipment’s including mechanical and electrical systems.

b) Diagnose and troubleshoot a range of basic to complex problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Monitor and maintain building systems such as lighting, and security systems.

b) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

c) Coordinate and the ability to perform a range of basic to complex repairs and adjustments to maintain a safe and well-maintained working environment.

d) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Calibrate and fine-tune equipment to ensure accurate operation and optimal performance.

c) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide training for new and unskilled technician

b) Mentor and train junior technicians

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus.

• Proven min 3 years’ experience as a Maintenance Technician or similar role.

• Proficiency in using hand and power tools.

• Strong diagnostic and problem-solving skills.

• Ability to read technical manuals, schematics, and diagrams.

• Strong attention to detail and organizational skills.

• Excellent communication and teamwork abilities.

• Knowledge of safety protocols and regulations.

• Flexibility to work on-call or during off-hours, if necessary.

• Proficient in Microsoft Excel, Words, PowerPoint, familiar with CMMS

• Good communication skills. This role may need to collaborate with Chinese environment people .

• Good report writing skills.

• Proactive work attitude.

Responsibilities

• Make estimates for maintenance parts sales.
• Prepare necessary quotations and negotiate with customers.
• Update and monitor progress of sales status.
• Prepare necessary reports relating to quotation and sales works.
• Issue job instructions and other relevant documents for the works.
• Assist in developing and maintaining software for sales work.
• Co-ordinate with other departments on matters relating to works.
• Report to superior on all matters relating to the section.
• Carry out any other duties as assigned by the superior.
• Keep proper records and filling of works carried out.
• Ensure all data and information are kept in confidentiality.
• Ensure compliance to the Environmental Policy, reduction of waste and prevention
• Ensure compliance to the Environmental Policy, reduction of waste and prevention of pollution.

Requirements

• Entry Level / No experience
• Diploma / Degree in Engineering field
• No experience
• Basic administrative skills
• Microsoft Words, PowerPoint and Excel skills such as creation of table and analysing data.

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

RESPONSIBILITIES

1. Works with Electrical & Instrument Engineers and vendors contribute to Plant E&I Equipment Reliability and continuous improvement that fit for purpose for Process Improvement, with the objective to improve process/ occupational safety, improve product safety/ quality, reduce energy consumption, improve production capacity/ productivity and reduce costs.
2. Support Electrical & Instrument Engineers for plant maintenance related troubleshooting and problem solving to ensure plant equipment uptime and achieve KPI set for the Maintenance department.
3. Support maintenance manager to achieve KPI set in all aspect, such as Safety, Quality Productivity and provide technical support in all the aspect of plant maintenance
4. Act as Maintenance Subject Matter Expert for various E& I system in Synthetic Rubber Production Process.
5. Troubleshoot E&I system trouble, perform root cause analysis and propose corrective and preventive measures ensure action items fallow up close until the end.
6. Ensure LT Plan updated and all document in order for Customer audit and fallow up customer audit and other audit action items fallow up till the end.
7. Manage and control documents related to Instrument and Control System.
8. Participate actively in HAZOP studies and fallow up action items as per process safety requirements.
9. Participate in Company EHSQ program and cooperate with its promotion and improvement
10. Collaborate with other departments in Management systems of AKSS such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC plus as process engineering function
11. Perform study as Maintenance Function such as NRW, MOC and as per request from other departments.
12. Keep and maintain safe and health work environment
13. Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OSHAS18001, IATF 16949).
14. To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
15. Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.

REQUIREMENTS

1. A bachelor’s degree in electrical/ Electronic Engineering, Instrumentation & Control Systems or equivalent.
2. At least 5 year(s) working experience in Petrochemical Industries.
3. Expert in Plant Electrical, Instruments, Distributed Control System (DCS), and Programmable Logic Controllers (PLC) Maintenance.
4. Familiarity with IATF 16949 standard (Preferred)
5. Familiarity with ISO9001, ISO14001, ISO45001 and SS651
6. Functional Safety System Maintenance and testing and in accordance with IEC standard requirement.
7. Familiarity with Electrical installation system maintenance requirements and standard
8. Able to multi-task and handle a wide spectrum of responsibilities.
9. Good interpersonal skills and strong analytical skills.
10. Able to fit with company values; Sincere, challenge spirit, creative

(WEST REGION)

General Scope :

1. Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).
2. To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
3. Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.
4. Ensure compliance to Customer Specific Requirements (CSR).

Main Duties & Responsibilities :

1. Manage day-to-day maintenance services of electrical and field instruments in the process plant.
2. Lead in the investigation/trouble-shoot of instrument fault or failure and provide effective and viable corrective and preventive action.
3. Analyse and improve equipment reliability of plant to prevent recurrence with production group and contractors.
4. Good knowledge and hand-on experience with DCS and PLC system.
5. Prepare long-term maintenance plan for plant instrument, CV, Motor & Electrical Equip etc.
6. Manage annual shutdown maintenance (Work planning, Management of actual site work, Liaising with contractors and production group).
7. Manage in-house contractors to execute maintenance timely and effectively.
8. Manage inventory control, quality of in-house contractor and vendor work.
9. Responsible to ensure ISO/Mandatory calibration document, instrument files and work order documentation is timely complete with accurate in accordance with SOP
10. Develop, revise and review of SOPs for maintenance/inspection of plant electrical and instrumentation equipment (eg. TI, TT, PI, PT, CV, on/off valve, motor, Switchgear, MCC etc.).
11. Prepare documentation pertaining to procedures, qualities and safety of maintenance work.
12. Ensure all maintenance activities comply with AKSS EHS policies.

REQUIREMENTS

1. Degree in Electrical, Electronics, Instrumentation engineering or the equivalent.
2. Min 5 years of experience as an E&I Engineer in chemical plant.
3. Basic understanding of maintenance technology, equipment, instruments, electrical and manufacturing process.
4. Demonstrate ability to manage contractors/vendor independently and effectively.
5. Good interpersonal and communication skills.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Job Summary

The Maintenance Technician is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technicia is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair variety of equipment’s including mechanical and electrical systems.

b) Diagnose and troubleshoot a range of basic to complex problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Monitor and maintain building systems such as lighting, and security systems.

b) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

c) Coordinate and the ability to perform a range of basic to complex repairs and adjustments to maintain a safe and well-maintained working environment.

d) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Calibrate and fine-tune equipment to ensure accurate operation and optimal performance.

c) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide training for new and unskilled technician

b) Mentor and train junior technicians

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus.

• Proven min 3 years’ experience as a Maintenance Technician or similar role.

• Proficiency in using hand and power tools.

• Strong diagnostic and problem-solving skills.

• Ability to read technical manuals, schematics, and diagrams.

• Strong attention to detail and organizational skills.

• Excellent communication and teamwork abilities.

• Knowledge of safety protocols and regulations.

• Flexibility to work on-call or during off-hours, if necessary.

• Proficient in Microsoft Excel, Words, PowerPoint, familiar with CMMS

• Good communication skills. This role may need to collaborate with Chinese environment people .

• Good report writing skills.

• Proactive work attitude.

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

Job Summary

The Maintenance Technician is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technicia is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair variety of equipment’s including mechanical and electrical systems.

b) Diagnose and troubleshoot a range of basic to complex problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Monitor and maintain building systems such as lighting, and security systems.

b) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

c) Coordinate and the ability to perform a range of basic to complex repairs and adjustments to maintain a safe and well-maintained working environment.

d) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Calibrate and fine-tune equipment to ensure accurate operation and optimal performance.

c) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide training for new and unskilled technician

b) Mentor and train junior technicians

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus.

• Proven min 3 years’ experience as a Maintenance Technician or similar role.

• Proficiency in using hand and power tools.

• Strong diagnostic and problem-solving skills.

• Ability to read technical manuals, schematics, and diagrams.

• Strong attention to detail and organizational skills.

• Excellent communication and teamwork abilities.

• Knowledge of safety protocols and regulations.

• Flexibility to work on-call or during off-hours, if necessary.

• Proficient in Microsoft Excel, Words, PowerPoint, familiar with CMMS

• Good communication skills. This role may need to collaborate with Chinese environment people .

• Good report writing skills.

• Proactive work attitude.

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

Job Summary

The Maintenance Technician is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technicia is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair variety of equipment’s including mechanical and electrical systems.

b) Diagnose and troubleshoot a range of basic to complex problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Monitor and maintain building systems such as lighting, and security systems.

b) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

c) Coordinate and the ability to perform a range of basic to complex repairs and adjustments to maintain a safe and well-maintained working environment.

d) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Calibrate and fine-tune equipment to ensure accurate operation and optimal performance.

c) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide training for new and unskilled technician

b) Mentor and train junior technicians

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus.

• Proven min 3 years’ experience as a Maintenance Technician or similar role.

• Proficiency in using hand and power tools.

• Strong diagnostic and problem-solving skills.

• Ability to read technical manuals, schematics, and diagrams.

• Strong attention to detail and organizational skills.

• Excellent communication and teamwork abilities.

• Knowledge of safety protocols and regulations.

• Flexibility to work on-call or during off-hours, if necessary.

• Proficient in Microsoft Excel, Words, PowerPoint, familiar with CMMS

• Good communication skills. This role may need to collaborate with Chinese environment people .

• Good report writing skills.

• Proactive work attitude.

We are recruiting operation supervisor for the food court and coffee shop etc...................

Candidates are to oversee all activity of a specific department or area in a company and to report their findings to upper management and also to ensure things are moving smoothly. All races are welcome.

• Mon - Fri 8am to 5.30pm
• Permanent Role
• Great Career Progression

Job Description:

To support vertical repair for all customer probe cards in company factory following

• Knowledge on prober hands on to do probe card reshaping, all vertical repair processes
• Pin replacement
• All vertical repair processes like lapping/washing/baking etc.

1. Liaise with overseas end for any technical issues/new procedures etc.
2. Work with planners for the scheduled lead time, repairs etc.
3. Reports/trackers update for internal team
4. Support other sites if necessary
5. Any other ad hoc duties if needed.

Requirements:

• Diploma in Electrical / Electronics
• Experienced in Semiconductor will be an additional advantage
• Troubleshooting & Isolation of problems
• Able to read PCB schematics

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chong Kar Howe

EA Personnel Reg. No.: R23117793

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

General Scope :

1. Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).
2. To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
3. Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.
4. Ensure compliance to Customer Specific Requirements (CSR).

Main Duties & Responsibilities :

1. Manage day-to-day maintenance services of electrical and field instruments in the process plant.
2. Lead in the investigation/trouble-shoot of instrument fault or failure and provide effective and viable corrective and preventive action.
3. Analyse and improve equipment reliability of plant to prevent recurrence with production group and contractors.
4. Good knowledge and hand-on experience with DCS and PLC system.
5. Prepare long-term maintenance plan for plant instrument, CV, Motor & Electrical Equip etc.
6. Manage annual shutdown maintenance (Work planning, Management of actual site work, Liaising with contractors and production group).
7. Manage in-house contractors to execute maintenance timely and effectively.
8. Manage inventory control, quality of in-house contractor and vendor work.
9. Responsible to ensure ISO/Mandatory calibration document, instrument files and work order documentation is timely complete with accurate in accordance with SOP
10. Develop, revise and review of SOPs for maintenance/inspection of plant electrical and instrumentation equipment (eg. TI, TT, PI, PT, CV, on/off valve, motor, Switchgear, MCC etc.).
11. Prepare documentation pertaining to procedures, qualities and safety of maintenance work.
12. Ensure all maintenance activities comply with AKSS EHS policies.

REQUIREMENTS

1. Degree in Electrical, Electronics, Instrumentation engineering or the equivalent.
2. Min 5 years of experience as an E&I Engineer in chemical plant.
3. Basic understanding of maintenance technology, equipment, instruments, electrical and manufacturing process.
4. Demonstrate ability to manage contractors/vendor independently and effectively.
5. Good interpersonal and communication skills.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chong Kar Mun

EA Personnel Reg No: R2089894

• Good platform to exposure.
• 5 Days work Week / Perm Role
• Friendly working environment.

Responsibilities:

• Configure and install various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS)
• Configuring and maintaining Layer2/3 Switches and Routers and building switch stacks
• Implement and maintain security connectivity solutions including firewalls, IDS/IPS, VPN and SSL technology and routing protocols (BGP, EIGRP, RIP, OSPF)
• Perform configuration updates, such as modifying configurations, signature definitions or implementing new policies on various network security tools, as directed
• Assist with daily operating procedures and administration for assigned elements.
• Identify, diagnose, and resolve information security issues
• Perform network hardware maintenance and system upgrades including service packs, patches, hot fixes, and security configurations
• Coordinate and, in many cases, implement fixes (patches, configuration changes and so much more) for discovered issues
• Perform proactive maintenance, upgrades, and enhancements to our customers
• Perform advanced troubleshooting of network connectivity issues involving security products, firewall/ACL rules, complex routing, and NAT rules
• Develop, execute, and maintain security system fault management support procedures for assigned systems.
• Liaise with vendors and other IT personnel for problem resolution
• Reflect and visualize the network and security strategy and status to our managed customer
• Cultivate and advise advance security methodology and standards to our managed customers
• Implement security tools, policies, and procedures in conjunction with the customer’s network and security team
• Ensure timely proactive identification and reporting of security gaps and vulnerabilities to the critical business information, systems, and network infrastructure

Requirements:

• Relevant Degree or Diploma in Electronic Engineering / Computer Science
• Minimum 2 years working experience in the similar field.
• Excellent knowledge of TCP/IP protocol
• Familiar with Aruba and Cisco networking systems
• Relevant hands on past project implementation, devices and systems
• CCNA certification will be added advantage

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected] or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Hooi Wai Man (Samantha)

EA Personnel Reg No: R21100062

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

RESPONSIBILITIES

• Works with Electrical & Instrument Engineers and vendors contribute to Plant E&I Equipment Reliability and continuous improvement that fit for purpose for Process Improvement, with the objective to improve process/ occupational safety, improve product safety/ quality, reduce energy consumption, improve production capacity/ productivity and reduce costs.
• Support Electrical & Instrument Engineers for plant maintenance related troubleshooting and problem solving to ensure plant equipment uptime and achieve KPI set for the Maintenance department.
• Support maintenance manager to achieve KPI set in all aspect, such as Safety, Quality Productivity and provide technical support in all the aspect of plant maintenance
• Act as Maintenance Subject Matter Expert for various E& I system in Production Process.
• Troubleshoot E&I system trouble, perform root cause analysis and propose corrective and preventive measures ensure action items fallow up close until the end.
• Ensure LT Plan updated and all document in order for Customer audit and fallow up customer audit and other audit action items fallow up till the end.
• Manage and control documents related to Instrument and Control System.
• Participate actively in HAZOP studies and fallow up action items as per process safety requirements.
• Participate in Company EHSQ program and cooperate with its promotion and improvement
• Collaborate with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC plus as process engineering function
• Perform study as Maintenance Function such as NRW, MOC and as per request from other departments.
• Keep and maintain safe and health work environment
• Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OSHAS18001, IATF 16949).
• To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
• Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.

REQUIREMENTS

• Bachelor’s degree in Electrical/ Electronic Engineering, Instrumentation & Control Systems or equivalent.
• Working experience in Petrochemical Industries.
• Expert in Plant Electrical, Instruments, Distributed Control System (DCS), and Programmable Logic Controllers (PLC) Maintenance.
• Familiarity with IATF 16949 standard (Preferred)
• Familiarity with ISO9001, ISO14001, ISO45001 and SS651
• Functional Safety System Maintenance and testing and in accordance with IEC standard requirement.
• Familiarity with Electrical installation system maintenance requirements and standard
• Able to multi-task and handle a wide spectrum of responsibilities.
• Good interpersonal skills and strong analytical skills.
• Able to fit with company values; Sincere, challenge spirit, creative

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or submit your resume to [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chong Kar Mun

EA Personnel Reg No: R2089894

Job duties:

• Conducting repair and soldering PCB boards tasks
• Perform a variety of inspection and gauging operations to ensure good quality standards.
• Provide the support to another employee or other shift upon the demanding
• Ensure productivity and quality are met

Requirements:

• NITEC in any engineering related
• 0 to 1 year PCB board repair by using microscope equipment
• Willing to work in cleanroom environment

Monday to Friday, office hours + Overtime

Basic Up $3000 + Overtime + AWS + Performance bonus + Other allowances

Location: Kallang

For a confidential discussion, please forward a copy of your latest CV in Word format to [email protected]

Please include the following details in your resume:

• Expected salary

• Notice period

We regret that only shortlisted applicants will be notified.

Tan Lee Fong, Grayson | Reg No.R1441412| EA License No. 02C3423 |

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.