Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Ship Repair Supervisor

• Location: Penjuru lane ( Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: $2,700 - $3,500

Job Responsibilities:

• To fulfil ship repair jobs afloat or shipyard
• Carrying out maintenance, service and repair of all mechanical equipment (Diesel Engines, pumps, gearboxes, couplings, alternators, hydraulic system, deck machinery etc) on board all vessels as assigned.
• Troubleshooting all the mechanical equipment on board vessels.
• Jobs involved engine equipment removal, reinstallation, servicing, repair and reconditioning, commissioning activity.
• Ensure adequate maintenance of tools, equipment and cleanliness in the workshop.
• Managing team and delivering ship / shipyard schedule required.
• Carrying out any retrofit job for new equipment installation on board vessels.
• VSCC meeting, permit to work system, and trade certificates are required
• Managing of workforce and job, writing job completion report, submitting cost evaluation, liaise with owners representative, and always have to follow company SOP.
• Any other duties as assigned by ship repair manager and management.

Job Requirements:

• Diploma/Certificate in Marine Engineering or equivalent.
• At least 3 years relevant working experience.
• Able to read drawings and write service reports.

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

The Supreme HR Advisory Pte Ltd

Reg No: R1988890

EA No: 14C7279

• Location: Changi South
• Working Days: 5 days, Mon to Friday
• Working schedule : (rotating 8 hours shift) 0730 AM to 1630 PM, 1330 PM to 2330 , 2230 PM to 0730 AM, 5 day work but weekend need to work if rotate
• Salary : basic $2300 + allowance + night shift allowance

Position Requirements & Education:

• Education: GEC “O” level

Position Description:

• Perform manufacturing operations associated with production parts.
• Ability to communicate what has been experienced and or seen.
• Accurately and efficiently set-up equipment per engineering instructions / Customer’s spec.
• Execute daily autonomous maintenance and set-up activities.
• Assist in developing improvement methods and practices to increase production output safely.
• Accurately complete/create documentation associated with production processes.
• Ensure timely and accurate transactions of workflow in Oracle system.
• Assist in performing required process capability studies, equipment installation qualifications, and process validation.
• Active participation on audit such as safety inspection, STOP card, Job safety Analysis.
• Comply with all company policies and procedures including safety regulations, PPE requirements, SOP, Job Instructions and Good manufacturing procedures.
• Responsible for upkeep of production areas and provide a clean and safe work environment.
• Other duties as assigned

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description

• Processes prescriptions and dispenses medications to patients in accordance with doctor's directions as specified in prescriptions
• Compounding of drugs (onco)
• Other adhoc duties

Requirements

• Min Diploma in Pharmaceutical Science or equivalent
• Knowledge in compounding drugs

All qualified applicants, please send in your resume to:

[email protected]

Jacqueline Fong Hsin Ting (R21103226)

Recruit Express Pte Ltd

Company Reg. No. 199601303W

EA License Number: 99C4599

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Service Technician
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $2,500 + OT Pay + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Maintain and clean test sockets to ensure proper contact with ICs during testing.
• Inspect test sockets for any physical damage and advise customers if a replacement is needed.
• Perform socket pin replacements and ensure high-quality work.
• Maintain good attendance and provide daily updates on job progress.
• Collaborate with team members to meet customer deadlines.
• Be available for overtime work, including weekends, as per the scheduled plan.

APPLY NOW!!!

• Minimum GCE O Level/NITEC.
• Looking for candidates with attention to detail and strong teamwork skills.
• Ability to work overtime when required to meet deadlines.
• Previous maintenance or service experience is an advantage.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69798 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Car Electrician (repair Truck wiring)
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $2,000 + OT + Meals + Accommodation + Transportation + tea break
• Duration: Permanent Role

Key Responsibilities

• Diagnose and repair electrical issues in trucks, including wiring, lighting, and other electrical components.
• Inspect and troubleshoot electrical systems in trucks to ensure proper functionality.
• Repair or replace faulty wiring, fuses, switches, and electrical systems.
• Install new electrical systems and components as needed, following safety guidelines.
• Use electrical diagnostic tools and schematics to identify issues quickly and efficiently.
• Work closely with other technicians to ensure trucks are maintained and repaired on schedule.
• Maintain a clean and organized work area, ensuring compliance with safety regulations.

APPLY NOW!!!

• Prior experience working as a Car/Truck Electrician is essential, specifically in repairing truck wiring and electrical systems.
• Strong knowledge of truck electrical systems, wiring, and diagnostic tools.
• Relevant certifications in automotive electrical repair are a plus.
• Ability to identify and fix electrical faults efficiently with great attention to detail.
• Meals provided daily.
• Accommodation provided.
• Free company transport between the dormitory and workshop.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69947 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: IT/Rental (Photocopier)
• Position Title: Copier Technician
• Working Location: Ubi Ave
• Working Hours: 5.5 days (Mon-Fri 8.30am–5.30pm, Alternate Sat 8.30am-12.30pm)
• Salary Package: Basic $3,000 + VB + OT Pay + Company Vehicle Provided
• Duration: Permanent

Key Responsibilities

• Install and set up photocopier machines and connectivity at customer locations.
• Diagnose and repair equipment both on-site and off-site.
• Investigate and resolve maintenance and repair issues.
• Manage tool kits, spare parts, and supplies responsibly.
• Conduct preventive maintenance and adjustments on photocopiers.
• Provide excellent support by responding to customer needs promptly.
• Submit meter readings on time.
• Train and advise customers on machine operation and basic maintenance.
• Interact professionally with all customers.
• Build good relationships with customers and colleagues.
• Perform any other duties assigned by supervisors.

APPLY NOW!!!

• GCE O-Level or higher.
• Has valid driving license to go on site for servicing.
• Experience in repairing/service of copier machines is preferred.
• Customer service skills.
• Basic PC and network knowledge is a plus.
• Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70878 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Responsibilities:

• Be responsible for the company's network, service equipment, the daily operation of desktop and management of the company's IT operation
• Provide on-site service support and handle the installation and maintenance of client's computer desktop, hardware and network equipment
• Be responsible for debugging and troubleshooting the video conference system
• The installation, debugging, configuration and maintenance of the desktop equipment (e.g. desktop, notebook, printer, printer, video conference, telephone, etc.)
• Communication with users to ensure the normal operation of the system
• Normal maintenance of network and computer room management (configured switches and firewalls basically)
• Management of the company's IT assets
• Other IT works assigned by the department manager and work report

Job Requirements:

• College degree and above, major in computer and other related fields
• Familiar with the basic network technology, the working principle of TCP/IP protocol, proficient in the configuration of brand network equipment such as Feita and Cisco, and experienced in the operation and maintenance management of computer room is preferred
• Familiar with mainstream systems such as Windows and Mac operating systems, common conference systems and equipments such as Polycom/Cisco/Teams. Experienced in deploying and debugging systems related to AD domain is preferred
• Good communication skills, initiative in work, strong learning ability, teamwork spirit, ability to work under pressure, strong sense of responsibility and service
• More than three years of relevant IT helpdesk experience. Experienced in system research and development with logical thinking is preferred
• Handle common computer hardware and software failures independently
• Accept the occasional business trip and hardworking
• Proficient in both English and Mandarin

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Technician
• Working Location: Ang Mo Kio
• Working Hours: 5 Days/ 6 Days per week, 9am – 6pm
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Install, maintain and repair electrical machines.
• Identify and diagnose issues with machinery to perform timely repairs.
• Perform routine maintenance and inspections to ensure optimal performance.
• Assist with the development of existing or new machines.
• Helps in the sourcing of machine parts and liaise with vendors when required.
• Other ad hoc duties as assigned.

APPLY NOW!!!

• Proven experience in the electrical and machinery fields.
• With good understanding of electrical systems.
• Technical drawing knowledge is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Position title : Operation Technician (Changi, rotating shift)

Location: 44 Changi South Street 1 Singapore 486762

Working Days: 5 days, Mon to Friday

Working schedule : (rotating 8 hours shift) AM 0730 to1630 PM, 1330 PM to 2330 , 2230 PM to 0730 AM, 5 day work but weekend need to work if rotate

Salary : basic $2300+ allowance $150+$15per night shift only( if candidates work night shift)

AWS + VB

Medical ,Dental and insurance provided.

Position Requirements & Education: Education: GEC “O” level

Position Description:

· Perform manufacturing operations associated with production parts.

· Ability to communicate what has been experienced and or seen.

· Accurately and efficiently set-up equipment per engineering instructions / Customer’s spec.

· Execute daily autonomous maintenance and set-up activities.

· Assist in developing improvement methods and practices to increase production output safely.

· Accurately complete/create documentation associated with production processes.

· Ensure timely and accurate transactions of workflow in Oracle system.

· Assist in performing required process capability studies, equipment installation qualifications, and process validation.

· Active participation on audit such as safety inspection, STOP card, Job safety Analysis.

· Comply with all company policies and procedures including safety regulations, PPE requirements, SOP, Job Instructions and Good manufacturing procedures.

· Responsible for upkeep of production areas and provide a clean and safe work environment.

· Other duties as assigned

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Description

• $2600 - $3200
• 5.5 Days work
• 8am to 5pm, 8am to 12pm
• AWS + VB
• Shipbuilding Industry

Responsibilities:

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment
• Diagnose and repair mechanical, electrical, and electronic issues
• Maintain detailed records and documentation
• Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities

Requirements:

• Diploma in Electrical or similar
• At least 1 year working experience in electrical repairs and maintenance
• Candidate possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification is an added advantage

Interested applicants, kindly send your updated resume to +65 8288 5668 or Email to "[email protected]"

We regret that only shortlisted candidates will be notified.

EA Reg. No: R1880058 | Dylan

EA License No: 15C7752

5.5 Days

Monday - Friday ; Saturday

8.30am - 6pm ; 8.30am - 1pm

Office location: Yio Chu Kang

Responsibilities

• Track and monitor maintenance programs and schedules for ongoing effectiveness.
• Conduct inspections to verify that the property is well maintained.
• Oversee emergency and ad hoc repairs, troubleshooting, and breakdown management, providing technical support to the team and coordinating with subcontractors and vendors.
• Prepare monthly reports for management review.
• Plan and manage maintenance services, schedules, and improvement projects to ensure smooth building operations in coordination with the Senior Management team.
• Ensure that the Facilities Maintenance team and external contractors/vendors comply with ISO standards, regulations, and safety guidelines.
• Supervise building systems, including fire safety, landscaping, and mechanical and electrical systems, to ensure safe and smooth operation.
• Coordinate and oversee all M&E administrative tasks by liaising closely with consultants and clients.
• Monitor and address building system breakdowns, defects, and shutdowns.
• Perform additional facilities management duties as assigned.

Requirements

• Minimum 4 years of relevant experience in related Facility Management or equivalent.
• Proficient in Microsoft Office and computer skills.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Job Summary:

The Facilities Executive will be responsible for ensuring the efficient operation, maintenance, and improvement of building infrastructure and services. This role includes coordinating maintenance activities, managing service vendors, ensuring compliance with safety regulations, and providing support to tenants or stakeholders for smooth operations.

Key Responsibilities:

• Operational Management
• Oversee daily operations of building facilities, including HVAC systems, electrical, plumbing, and fire safety systems.
• Conduct routine inspections to identify maintenance needs and ensure optimal performance of facilities.
• Coordinate and supervise scheduled maintenance, repairs, and improvements

Vendor and Contractor Management

• Liaise with service providers and contractors to ensure timely and quality service delivery.
• Review and manage contracts for outsourced services such as cleaning, landscaping, and security.
• Verify and approve vendor invoices and track budget utilization.

Safety and Compliance

• Ensure facilities comply with health, safety, and environmental regulations.
• Coordinate and conduct safety drills and inspections as required.
• Maintain accurate documentation for audits and compliance purposes.

Tenant and Stakeholder Support

• Act as the primary point of contact for tenants or building occupants for facility-related issues.
• Resolve complaints and coordinate solutions to maintain tenant satisfaction.
• Communicate effectively regarding planned works or service interruptions.

Administrative Duties

• Maintain accurate records of maintenance schedules, service reports, and operational manuals.
• Assist in preparing reports on facility performance, budgets, and improvement recommendations.
• Support the Facilities Manager in implementing new initiatives and projects.

Energy and Sustainability

• Monitor energy consumption and identify opportunities for cost-saving and sustainability initiatives.
• Implement practices that promote environmental responsibility.

The details are as follows (see below):

Job Category/Programme: Administrative

Role: Technician (Part-Time), School of 3D Design

Nanyang Academy of Fine Arts (NAFA), University of the Arts Singapore, an esteemed arts institution with a global reputation, seeks a functionally strong Technician at the School of 3D Design.

The School of 3D Design fosters design and creative thinking while sharpening technical capabilities for their learners, while undergoing an enriching and intensive journey of design education, developing key skills and learning about technologies, trends and their impact on design.

In this pivotal role, you will support students in developing their creative expression, technical skills, and innovative practices within our industry-focused, practice-led curriculum. This includes hands-on studio work, industry projects, and enriching workshops, all within a holistic and integrative learning environment.

Key Responsibilities

The key responsibilities of this role involves managing the daily operations and maintenance of workshop machinery, including CNC machines, table saws, and radial arm saws, ensuring all equipment remains in optimal working condition. You will play a key role in supervising students on their projects, providing technical guidance and support in the construction and prototyping of their designs using the workshop's tools and equipment.

In addition, you will be responsible for conducting induction sessions to educate users on the proper use of machines and facilities while ensuring strict adherence to workshop rules and safety regulations. Your support will extend to guiding students as they experiment and produce both scaled and full-sized prototypes, fostering their technical skills in a safe and productive environment.

This role also involves maintaining workshop safety, cleanliness, and readiness is a critical aspect of this role. You will also collaborate with lecturers to prepare materials for classes and conduct demonstrations to support student learning. Beyond these responsibilities, you will assist in planning and organizing various activities, such as industry collaborations, exhibitions, talks, and events like Open House.

Requirements

You should minimally possess a Diploma qualification in a related discipline and/or industry experience. Fresh Graduates are welcome to apply as well.

To excel in this role, you should also have a strong technical background, including proficiency in fabrication and working in the workshop.

The ideal candidate must have the ability to thrive in a fast-paced environment, adapt to changing priorities, multitask effectively, and consistently meet deadlines.

You should be resourceful and proactive in addressing issues, possess good organisational and coordination skills, and be a team player with excellent communication and interpersonal skills.

If you have a passion for the arts, we encourage you to apply. This is your opportunity to be part of NAFA in our season of global recognition and to shape the future of arts education in Asia.

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + Accommodation + Transportation + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a strong focus on customer satisfaction.
• Meals provided daily.
• Accommodation provided.
• Free company transport between the dormitory and workshop.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Information

1. Mon - Fri: 8.30am to 5.30pm, Sat: 8.30am to 12.30pm
2. Salary range: $2200 – $3500

Responsibilities:

• Perform all preventive and breakdown maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by the immediate superior.
• Prepare service reports after every completed job for customer’s endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements:

• Nitec in Mechanical / Electrical / Electronic or related field
• Experience in chillers, ACMV equipment, switchboard, and generators will be an advantage
• Candidates with no experience are welcome to apply

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the Pharmaceuticals industry. They are looking for a Process Technician to assist their team for the next phase of their business. They are located in the West – easily accessible.

Note: This is a 1-year contract, convertible and renewable.

Responsibilities:

• Adhere to company’s guidelines while operating and overseeing manufacturing machinery, promptly addressing any alerts during production
• Manage materials used in production and undertake cleaning and sterilization duties within the workplace
• Responsible for the daily functions/operations of designated manufacturing machinery
• Store materials in accordance with the prescribed company’s protocols
• Record/Maintain data in the company’s inventory management system
• Gather the necessary materials, equipment, and solutions for cleaning and sterilization
• Conduct both manual/automated cleaning and sterilization of machinery, containers, and workplaces
• Conduct calibration and pre-operational checks on manufacturing equipment, following the standard protocols
• Operate machinery equipment for filling and packaging purposes
• Identify/Resolve packaging quality issues, implementing the corrective measures as required
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Position : Dental Technician
• Location : Ubi
• Working hours : 5.5 days/ Monday to Friday from 8.30am to 5.30pm, and every Saturday from 8.30 to 12.30pm.
• Salary(commensurate depending on experience) : Up to $2700 + Bonus + 14 days Annual Leave +
• Duration : Permanent
• Industry : Dental

Main Responsibilities

• Prescription Reading: Interpret doctors' prescription forms.
• CAD/CAM Files: Download scans, upload for fabrication.
• CAD/CAM Operation: Operate milling equipment.
• Model Making: Create models from dental impressions.
• Prosthetic Fabrication: Build, repair, and alter prosthetics.
• Customisation: Tailor prostheses to patient needs.
• Quality Check: Ensure accuracy and standards.
• Collaboration: Work with a team and dentists.
• Material Management: Manage dental supplies inventory.
• Machine Management: Maintain and service equipment.
• Tech Utilisation: Stay updated on dental technology.
• Protocol Improvement: Develop and implement best practices.

Requirements:

• Min ITE certificate/ Diploma in electrical/electronic engineering
• FULL TRAINING PROVIDED
• Tech Literacy: Computer and phone skills required.
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684.

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such case

The Job

You will join the Maintenance Section to upkeep the manufacturing plants equipped with latest technology and advanced engineering control and support the Maintenance Manager in accomplishing corporate business objectives.

The Daily

• Lead a team of mechanical supervisors and contractors in performing all the plant maintenance, modification, and construction activities to ensure work are carried timely, safely and with good maintenance practices with no disruption to plant operations.
• Coordinate with plant operators and other maintenance groups in the execution of plant maintenance and modifications works with no compromise to safety of workers and integrity of facilities.
• Carry out mechanical study and modification of plant facilities according to technical specification and business requirements.
• Performs technical investigation on plant equipment troubles, evaluation of findings and recommend countermeasures to effectively prevent recurrences of similar problems
• Conduct and arrange training for staff and contractor to enhance their skill and competency levels.
• Respond to plant emergency calls and resolve mechanical troubles within tight schedule.
• Implement management systems based on standards stipulated under ISO 9001, ISO 14001, ISO 450001 and SS651.

The Essentials

• Possess a Diploma in Mechanical Engineering.
• Have at least 2 years of relevant work experience in maintenance of mechanical facilities in oil, petrochemicals and power industry.
• Hands on experience in troubleshooting and repair of Static Equipment and Rotating Equipment such as heat exchangers, pressure vessels, agitators, pumps, compressors and blowers.
• Proficient in Microsoft Office applications and basic knowledge in SAP applications will be advantageous.
• Essential prerequisites include good analytical & problem-solving skills, ability to communicate with staff in different functions & contractors, strong spirit of collaboration & teamwork.

Position title : Operations & Maintenance Supervisor

• Location: Jln Buroh
• Working Days: 5.5 work week
• Working hours : 7.30am to 4.30pm, Sat: 7.30am to 12.45pm
• Salary : Salary $2800 - $4500 (subject to qualifications and experience) + OT

Requirement

• Diploma in Engineering (Mechanical/Electrical) or relevant work experience in Petroleum/Oil and Gas is preferred.
• At least 3 years of working experience preferably in Plant
• Experience ensuring overall maintenance and repair works of the plant equipment

Responsibilities

• Plan, organize, day-to-day operations of the facility
• Be responsible for the overall maintenance and repair works of the plant equipment
• Lead a group of workers, hauliers and tanker attendants e.g. addressing issues or grievances, ensure proper facilitation of their job assignments and etc.
• Oversea and commit to plant safety procedures: WHS, FS
• Ensure stock count for cylinder tracking is timely and accurately reflected in our in-house system
• Communicate with other departments or parts of the plant to make sure everything runs smoothly
• Any other ad-hoc duties assigned.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

The Network Technician is responsible for installing, amending, and removing unnecessary cablings and other network peripherals.

The activities may include but not limited to:

• Install well-functioning computer networks, connections, and cabling.
• Perform troubleshooting to system failures and identify bottlenecks to ensure long term efficiency of network.
• Inspect LAN infrastructure and fix minor or major problems/bugs.
• Test and configure software and maintain and repair hardware and peripheral devices.
• Evaluate network performance and find ways of improvement

Make an Impact by

Technical Experience

• Experienced in Layer 1 Physical administration in enterprise DC and Port Environment.
• Responsibilities Analyzing, troubleshooting, and correcting network problems remotely/on-site
• Maintaining an inventory of network equipment along with their specifications
• Troubleshooting problems with computers, printers, network devices, or other network components to ensure optimal performance.
• Provide support for Level 1 escalated issues.
• Performing standard or project change request as per change window (non-business hours)
• Performs any other related duties as assigned by the team lead/manager.
• Driving within Port

Rack Condition

1. Rack Sighting
2. Rack Available
3. Rack Locked
4. Rack Fan Working
5. Rack Cleanliness
6. Power Cables Secured

Environmental Condition

1. Temperature (Check the location of the temperature and inform the authority or our engineer)
2. Other Environmental Factors (Dust, Dirt etc.), if Duty then need to clean the rack or space where device is located.
3. Physical Health of Device (Randomly need to check the device health).
4. AGV Preventive Maintenance.
5. Rack Mount and Dismount (Installation, Removal and Addition)

Labelling

1. Labelling Condition (verify labelling of device if not okay then need to relabel the device.

Skills for Success

• Must possess a valid Singapore class 3 driving license
• Diploma in Computer Science / IT or equivalent
• Minimum 1 year of experience in hands-on experience with common software and hardware installation and deployment