Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Objectives of this position:

The objective of the position is to support daily facilities & warehouse operations within our offices in Asia.

What will you do?

The holder of this position is mainly responsible for the following areas in coordinate with their superior:

Manage and maintain full spectrum of office administrative and facilities service

Identify improvements to operations process and cost to drive efficiencies

Align and maintain the administrative standard cross different premises

Key point of contact with Building Management, the Landlords, and contractors

Vendor management, involved in price and contract negotiations, review of facility related contracts

Review and check against quotation and invoices, ensuring accuracy is in place

Provide daily office facilities support, including but not limited to, equipment maintenance and office supplies control

Coordination for renovation and relocation project with property agencies, landlord and contractors across various Asian countries

Undertake ad hoc projects as assigned

What will you need?

5-8 years of experience in Facilities Management with regional experience

Experience in Hong Kong, China, Bangladesh, and Pakistan is desired.

Proficiency in Microsoft Office Suite

Strong interpersonal and communication skills

Adaptable, proactive, and well-organised

SITE MANAGER

(Building Construction/Project)

Responsibilities:

• to assist in Project team on site matters & work coordination etc
• on building projects assigned
• on maintenance and defects, A&A works
• co-ordination of sub-contractors and suppliers
• able to lead & Liaise with sub-contractors & suppliers
• comply with the site works and safety regulations and rules
• any other works as & when directed by the Management or your Superior

Requirements:

• Diploma or related work skill certificates
• Minimum 2 years construction trade experiences in Singapore
• Preferred Singaporean to apply

Responsibilities

• Oversee the maintenance of production machineries, ACMV systems for building and infrastructure, office facilities, fire protection systems, and related tasks within a GMP and GHP environment.
• Plan schedules, manage daily operations, troubleshoot, repair, and provide reports.
• Coordinate with production and other maintenance teams to ensure safe execution of maintenance and modification projects while preserving facility integrity.
• Conduct mechanical and electrical assessments and implement modifications to plant facilities based on technical requirements and business needs.
• Investigate equipment issues, analyze findings, and recommend preventative measures to minimize recurrence.
• Provide training to production operators to enhance skills and reduce downtime and faults.
• Respond to plant emergencies and address machine faults promptly.
• Conduct daily inspections for machine safety and fire safety.
• Collaborate with departments to address maintenance issues promptly and prioritize planned and unplanned maintenance activities.
• Undertake additional duties as assigned by superiors.
• Maintain comprehensive records of work, ad-hoc projects, and report writing.

Requirements

• Degree in Mechanical / Mechatronic Engineering
• At least 3 years of experience in Autonomous Maintenance in F&B Manufacturing Sector
• Hands-on experience required
• Able to work independently and as a team
• Responsible, proactive and have the initially to response to fault call upon activated
• Good oral/written communication and interpersonal skills

Company : MNC in petrochemical industry

Working Hour / Location : 8.30am to 5.15pm (Mon - Fri) / JURONG ISLAND (transport pickup to and fro at Jurong East Mrt)

Remunerations : Up to $5,200 + $300 mthly allowance + yearly increment + 13 mths Aws + 2 times Bonus payout yearly + permanent staff benefit

Responsibilities:

• Plan, coordinate and manage daily maintenance activities with in-house & external contractors and to execute maintenance timely and effectively.

• Service used equipment’s and components and ensure ready to use all time, ensure no down time due to unavailability of spare parts.

• Analyze and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors, prepare RCA and fallow up actions with Sr Engineers.

• Prepare and review spare parts list and equipment data inventory control and ensure critical spare availability, optimize spare parts, and manage stock effectively by using CMMS.

• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection, and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.

• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group and ensure safe completion of works.

• Update long-term maintenance plan for facilities and utility equipment’s.

• Ensure all maintenance activities comply with EHSQ policies by review & implement MSRA.

• Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).

• To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.

• Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.

• Work as team and support inter and Intra Department woks and demonstrate company Core Values.

• Available to support 24 hours plant operation needs (standby duty or if required)

Requirements:

• Degree, Diploma in Mechanical Engineering or any equivalent discipline

• Min 5 to 8 years of experience in Plant & facilities maintenance in chemical plant, petrochemical industry with supervisory hands on experience

• Understanding of Maintenance technology manufacturing process plant environment plus point

• Demonstrated ability to handle contractors independently and effectively and complete task.

• Good interpersonal and communication skills, independent and good supervisory background

JOB ID : L45XV977

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building Singapore 049705

DID: 6950 9725

http://www.peopleprofilers.com

Georgez Josiah LIM

License Number: 02C4944

Registration Number : R1108994

Please be informed that the personal data you provided by way of your job application to People Profilers will be collected, used and disclosed by or on behalf of People Profilers to determine or investigate your suitability, eligibility or qualifications for employment with People Profilers and/or its’ Clients and manage your application for employment with People Profilers and/or its’ clients, including identifying you as a potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Singaporeans or PR ONLY

Experienced AV Technician and driver

Singapore class 3 (Manual) driver license and driving experience required

Job Highlights

===========

Full Time position.

Opportunity to upskill and learn new things. Career advancement

Opportunities to try out and be exposed to new technologies

Casual environment

Roles & Responsibilities include but not limited to:

======================================

- Follow arrangements and company standard procedure.

- Safely transporting audio visual equipment to specified locations in a timely manner.

- Assisting with the loading unloading packing and setup of TV and speakers.

- Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing / fines.

- Ensuring safe driving at all times and not tail-gating vehicles in order to avoid accidents and damages to the delivery vehicle.

- Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

- Reporting any accidents and vehicle damage to management.

- Good working attitude and communication skills

- Able to work OT

- Setup TV

- Setup Speakers and other AV equipment

- Lay cables in a neat manner

General Requirements

==================

- Singaporeans or PR ONLY

- Experienced AV Technician and driver

- Singapore class 3 (Manual) driver license and driving experience required

- Highly responsible, punctual and good time management

- Attention to details and well organised

- Good team player with service-oriented mindset

- Experience setting up sound system, digital and analog audio mixer, LED video wall and other AV equipment will be ideal

- Work at height certification will be ideal

- Versatile, willing and flexible to take on broad spectrum of tasks and new tasks

- Adaptable to changes, stress and last minute requirements

- Positive, can do attitude

- Calm and level headed

- Good problem solver

Responsibilities:

• Maintain of machinery & facility maintenance records for traceability needs
• Maintaining of air conditioning, electric power, plumbing and lighting system, cleaning, decoration, grounds, building keeping and security of building surroundings.
• Responsible in overseeing all aspects of safety to ensure compliance to the Workplace and Health Act and other safety related statutory legislations.
• Conducting audits in facilities on relevant risks and support and work with facilities to mitigate these risks.
• Maintaining comprehensive records and reports on safety and environment management activities.
• Monitor and escort external sub-contractors in carrying out repair and maintenance works within Company’s premises
• To react actively in recovery of daily machineries & accessories breakdown (To be efficient with least MB downtime)
• To provide support in daily mechanical, electrical or air-conditioning preventive maintenance works inclusive of building maintenance
• Plan, schedule and perform of preventive maintenance program on machinery & facility (Compressor, cooling tower, air-condition, etc)
• Attend to all break downs or complaints promptly and to perform investigation and rectification works
• Ensure all works are carried out safely and in accordance
• Work closely with purchaser to be cost efficient for repair and maintenance tasks

Requirements:

• Possess at least a Professional Certificate/NiTEC, Engineering (Industrial), Engineering (Metal Fabrication/ Tool & Die/ Welding), Engineering (Mechatronic/ Electromechanical) or equivalent;
• Min. 2 years of relevant working experience preferred;
• Candidates holding an Electrician’s license and prior relevant working experience in medical molds industry will be an added advantage.

In this role, you will have the opportunity to:

• Accurately uses aids and work instructions to make decisions about the proper production flow based on product type or services.
• Prepares materials according to documented procedures using standard lab equipment and maintains accurate and detailed product, process, instrument, and training records.
• Performs lab cleaning and decontamination protocols in accordance to work instructions and maintenance connection software, as well as maintains electronic records of tasks to ensure that work is performed in an accurate, efficient, and appropriate manner.

The essential requirements of the job include:

· Minimum N/O level, Nitec in a Science related field or equivalent by relevant experience.

· Proficient computer skills which include knowledge of the internet, Microsoft Excel and Microsoft Word.

·

It would be a plus if you also possess previous experience in:

· Previous laboratory and chemical handling experience. (Preferred)

· Basic knowledge in manufacturing practices.

Ackcio Pte Ltd builds reliable wireless monitoring solutions for industrial applications. Our Ackcio Beam suite of products runs off our core technology, a long-range, low-power radio wireless mesh communication to reliably transmit industrial sensor data in real-time both underground and above ground. Currently our technology is widely used in construction, mining, infrastructure, and rail industries to automate the monitoring process, improve productivity, and make the activity safe. We now help major clients in over 50 countries across 6 continents monitor their projects with our technology.

Ackcio was incorporated in Singapore in 2016, and has drawn investments from prominent investors including Wavemaker Partners, Enterprise Singapore, Accelerasia, Aletra Capital Partners, Foundamental, and EF.

We are looking for a technician experienced in soldering on industrial-grade electronic devices and working on circuit boards for repairing damaged components.

Key Responsibilities:

• Perform soldering and assembly of electronic components with precision.

• Troubleshoot and repair hardware, ensuring quality and functionality.

• Test and validate electrical and electronic systems.

• Assist in the production and prototyping of new hardware.

• Document technical processes and maintain equipment.

• Collaborate with engineers and team members to improve hardware design and processes.

Ideal Skills and Qualifications:

• 1–2 years in an electronic or electrical technician role.

• Proficiency in soldering and handling electronic components.

• Strong understanding of electrical systems and circuits.

• Hands-on experience with hardware assembly, testing, and troubleshooting.

• Technical diploma in electronics, electrical engineering, or a related field

Manufacturing Technician

(1 year contract)

About the Company:

Our client is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. They design, build and service manufacturing equipment for the semiconductor and display industries.

Primary Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Utilizes routine work orders, schematics, wiring diagrams, parts, and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies, and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean, and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures, and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies, and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair, or software installs
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Requirements:

• Minimum ITE certifications or Diploma in related engineering education background
• At least 1 year of experience in manufacturing technician role within semiconductor industry
• Familiar with DDP and MDP tools in semiconductor industry

Reg No: R22104540

EA License no: 94C3609

Pharma MNC – QC Lab Technician (1-Year Contract)

Location & Transport

Workplace: Tuas

Transport Pickup Points: Serangoon, Choa Chu Kang, Jurong East, Paya Lebar, Outram, Woodlands

Working Details

Shift: 12-hour shifts

Salary:

Base: ~$2,500

Site Allowance: $250

Shift Allowance: $350

Day Shift: $21/shift

Night Shift: $55/shift

Key Responsibilities

Testing and Analysis

Perform biochemistry, analytical, and raw material testing for in-process and marketed products.

Conduct lot release testing per quality standards and procedures.

Lab Operations Support

Maintain housekeeping standards in the lab.

Perform Quality Tag Out for laboratory equipment (e.g., freezer, water bath).

Support operations such as method transfer, equipment calibration, cleaning, reagent management, and document handling.

Documentation & Compliance

Complete and review GMP documentation (data sheets, LIMS).

Write and revise SOP documents, change plans, and records.

Ensure compliance with USP, JP, and EP test procedures.

Audit & Inspection Readiness

Participate in inspections and audits, ensuring the lab remains in a state of regulatory compliance.

Support audit preparation and related activities.

Additional Duties

Handle QC sample receipt, assay, and release procedures.

Assist with general administrative tasks and ad-hoc projects as assigned.

How to Apply: Send your resume to:

Company : Japanese MNC in petrochemical industry

Working Hour / Location : 8.30am to 5.15pm (Mon - Fri) / JURONG ISLAND (transport pickup to and fro at Jurong East Mrt)

Remunerations : Up to $5,200 + $300 mthly allowance + yearly increment + 13 mths Aws + 2 times Bonus payout yearly + permanent staff benefit

Responsibilities:

• Plan, coordinate and manage daily maintenance activities with in-house & external contractors and to execute maintenance timely and effectively.

• Analyze and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors, prepare RCA and fallow up actions with Sr Engineers.

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability, optimize spare parts, and manage stock effectively by using CMMS.

• Analyse and improve equipment reliability of plant to prevent recurrence with production

• group and contractors.

• Manage annual shutdown/Grade change maintenance (Work planning, Management of actual site work, Liaising with contractors and production group).

• Good knowledge and hand-on experience with PLC system maintenance/inspection of plant electrical and instrumentation equipment (eg. TI, TT, PI, PT, CV, on/off valve, motor, Switchgear, MCC etc.)

• Leading troubleshooting efforts when E&I problems occur, quickly diagnosing the cause, and ensuring that repairs are carried out effectively.

• Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).

• To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.

• Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.

• Work as team and support inter and Intra Department woks and demonstrate company Core Values.

• Ensure all maintenance activities comply with EHSQ policies by review & implement MSRA.

Requirements:

• Degree/Diploma in in Electrical, Electronics, Instrumentation Engineering or any equivalent discipline

• Min 5 years of experience as an E&I Supervisor in Chemical Engineering or Petrochemical Plant industry

• Understanding of maintenance technology, equipment, instruments, electrical and manufacturing process.

• Demonstrate ability to manage contractors/vendor independently and effectively.

• Available to support 24 hours plant operation needs (standby duty or if required)

JOB ID : QWWX6RR6

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building Singapore 049705

DID: 6950 9725

http://www.peopleprofilers.com

Georgez Josiah LIM

License Number: 02C4944

Registration Number : R1108994

Please be informed that the personal data you provided by way of your job application to People Profilers will be collected, used and disclosed by or on behalf of People Profilers to determine or investigate your suitability, eligibility or qualifications for employment with People Profilers and/or its’ Clients and manage your application for employment with People Profilers and/or its’ clients, including identifying you as a potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

• Position: Manicurist/Nail Technician
• Working Days: 6 Days， 5 off days a month (Off day: Mon/ Tues）
• Working Timing: Mon-Wed 11am-8.30pm, Thurs-Fri 10am-8.30pm, Sat-Sun 10am-7pm
• Working Location: The Arcade (Near Raffles Place MRT)
• Salary: Basic $1,800 - $2,200 + comms ($3k-$4k)
• Salary: $1.6k-$1.7k + Comm (depending on skill)-Trainee/Intern

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities & Duties:

• Provide press on nail service
• Sell Press On Nail Service Packages, Hand Spa Packages, Pedicure Packages (Press On Nails)
• Provide great customer service with our clients
• Keep work area clean and sanitary
• Cashiering
• Inventory counting

Other Requirements:

• Full Time
• Minimum 1 year providing manicure and pedicure

Key Responsibilities:
Undertake preventive and corrective maintenance, including basic troubleshooting.
Supervise contractor works and report job progress.
Prepare and submit maintenance reports, checklists, and work reports.
Monitor workplace safety of contractors.

Requirements:
Possess a Higher NITEC or Diploma in Engineering Fields.
Possess own Transport.
Fresh graduates are welcome to apply.
Good interpersonal and communication skills for dealing with contractors and clients.
Able to work outdoors.
Willing to travel site-to-site for work purposes.

Position: Property Officer

Working location: Ang Mo Kio

Salary budget: $2800-$3000 + HP Allowance + OT

Working days: 5 - Days // 8.30am to 6pm

Job Description

• Verify building defects and to coordinate with the contractors to access rooms to carry out work.
• Attend and verify all enquiries/feedback of building defects pertaining to maintenance, landscape, cleaning, and pest control in the premises are carried out/rectified to the highest standard expected of the building owner and meet the SLA.
• Carry out room inspections during mass check in/out exercises, AV and logistics set up for conference events/facilities bookings.
• To follow-up for contractors' quotations.
• Any other duties may also be reviewed to ensure the estate is well managed.

Job Requirement

• At least Diploma in Estate/Facilities Management/Building & Construction/Mechanical/Electrical Engineering
• Minimum 3 years of relevant experience in managing buildings especially in all building related matters and M&E services

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Description:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.
• Complete all documentation including Record of Manual Operation (RMO), Cleaning Instruction (CI), Manufacturing Instruction (MI) according with GMP and GDP standards.

Requirements:

• Min. NITEC / Diploma in Chemical Engineering / Chemical Process Technology
• Exp in pharma industry will be an advantage
• Able to commit 12 hours rotating shift

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Highlights:

• AWS + VB
• Tuas (Pick up at CCK, Jurong West, Bukit Batok, Boon Lay, Clementi)
• 5 days, 8.30am - 5.15pm
• Manufacturing
• Mechanical Drawings (SolidWorks)

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• A team player

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Sim Jia Hui (Jacinda)
EA Personnel Reg No: R22106242

Job Description:

• Operate machines and perform LASIK related tests on ophthalmic equipment (e.g. Intralase, Excimer) in the operating theatre and the diagnostic room

• Ensure the operating theatre is in optimal condition for surgeries and that machines/equipment are functioning smoothly

• Prepare LASIK case notes at least a day before the surgery

• Arrange routine maintenance of equipment/fixtures

• Perform front counter duties including patient registration, dispensing, booking of operating theatres, collection of payment, providing financial counselling, handling of enquiries through phone calls or email, and appointment fixing

Requirements:

• Team player with excellent communication and interpersonal skills

• Proactive and positive working attitude

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

To manage and execute EMS/DMS SCADA projects and service contracts

Carry out routine and corrective maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements

Ensure smooth and proper execution of projects/contracts

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognised Polytechnic/University

Preferably have some working experiences in executing /maintaining of SCADA and Substation Automation System.

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Salary: up to $3040

Working Days & Hours: Mon-Fri Office Hours

Location: Changi (pickup at Tanah Merah)

Job Description:

• Uphold quality in every process of Distribution and Production operations undertaken
• Fully understand and adhere to all instructions as detailed in distribution & batch documents and SOPs
• Complete all documentation in compliance with the principles of cGMPs
• Perform routine cleaning of Clinical Services equipment and packaging rooms according to appropriate SOPs. Carry out housekeeping of the warehouse to ensure it is consistently clean and tidy
• Count and record materials required for use in Clinical Trial operations. Ensure all materials are handled carefully and in the correct manner
• (Quality) Report any known breaches in procedure, or any examples of substandard quality to supervisor
• Undertake additional duties or specific tasks as designated by superiors
• Receive incoming or returned materials in an efficient manner and perform putaway followed by the uploading of details into the Inventory Management System accordingly
• Ensure the correct picking of materials for all Distribution Orders
• Perform all Distribution activities in accordance with SOPs and Distribution instructions to ensure efficient, exact and secure completion
• Perform and maintain accurate computer transactions in line with Distribution and Inventory Management systems
• Process material for all Clinical Services packaging disciplines, e.g. blister packing, walleting, encapsulation, dispensing, label & compilation, in accordance with SOPs and Production Instructions
• (Quality) Undertake packaging duties in accordance with Good Manufacturing Practice as detailed in relevant SOPs.
• Hold responsibility for verification of materials processed by completing all relevant documentation.

Job Requirements: Min Diploma in Engineering or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Summary

Maintenance Technician I/II is responsible for the servicing, inspection, repair and maintenance of

equipment, plant and facilities.

Duties and Responsibilities

▪ Coordinate servicing, inspection, repair and maintenance of equipment, plant, and facilities to ensure

minimum downtime

▪ Plan and organize Weekly and Daily Preventive Maintenance (PM) Program

▪ Responsible for the performance and discipline of the technicians on shift duty

▪ Coordinate minor and major repairs, replacement & overhaul of equipment, plant, and facilities at

component & system level, to ensure minimum disruption to operations

▪ Ensure quick response to trouble-shoot, rectify, and re-activate equipment, plant, and facilities. If unable,

to organize recovery to workshop to repair, rectify and make good, and put back into operation with

minimum delays and downtime.

▪ Verify the accuracy of computer daily job sheets and time keeping

▪ Monitor and review work methods, conditions, and housekeeping to ensure safe working environment

▪ Verify and ensure workshop equipment are maintained in good working condition

▪ Verify parts for replacement are beyond economic repair (BER) and cannot be reconditioned

▪ Any other duties as assigned

▪ Ensure compliance with all workplace safety, security, and health policies and procedure

▪ Perform any ad-hoc duties as assigned by the reporting manager or department head

Requirements

▪ Minimum Vocational/ITE certificate or equivalent in Building Maintenance

▪ Experience in servicing, inspection, repair and maintenance of equipment, plant and facilities will be an

added advantage

▪ Must possess minimum LTA class 3 driving license

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)