Summary:

We are looking for a data-driven and responsible and support project development activities for Project Management & Plant Maintenance to join our team.

The Engineering Project Manager will apply project management best practices to drive efficiency, mitigate risks, and ensure successful project delivery.

You will be responsible for developing Establish, maintain, and improve the Quality Management System (QMS) to meet regulatory and Class Approval requirements

Roles & Responsibilities

Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Process Design, Review and Engineering for Plant Operation facilities, utility power and water, Petrochemical, Pharmaceuticals, industries and utility scale renewable projects.
• Manage budgets for All the projects, oversee licensing, and document quality approvals and procedures across sites.
• Develop P&ID, mass and heat balance, process flow diagram, operating/ control philosophy, overall supply scheme, layout, equipment specification, yield analysis etc.
• Develop and continually improve internal engineering best practices and procedures to provide engineering services of high quality in support of the various projects.
• Lead in process design and review inter-disciplines design/ engineering with consideration for safety, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Develop and continually improve in the following Systems

- SCADA System & Server for BMS & EMS system

- PLC TIA Portal V15 for Control System

- Reporting System for PWS, BMS & EMS System

- DCS Control System

- Field Instruments & VFD System

- Production System

- Utilities System (Purified Water System, Compressor System, Chiller Plant, Boiler System

• Evaluation of new technology and innovation solutions.
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, cost estimation, site survey, technical proposal to customer, project / EPC scoping strategy, vendor selection and review, determine LCOE, budgetary quotation review and clarifications, and all related technical support and solutions etc.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Participate in HAZOP, QRA, EIA studies.
• Review and approval of detailed design submitted by Contractors and ensure compliance with Standards and all the company best practices.
• Familiar with multiple energy resource simulation and and optimisation tools.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement.
• Ensure engineering support is provided in a timely manner to all stakeholders through resource planning, close collaboration with discipline engineers and team members, contractor management, etc.
• Where applicable, provide training and guidance other team members.
• Manage end-to-end project lifecycle, including planning, execution, monitoring, and closure, ensuring projects are completed on time, within scope, and budget.
• Collaborate with clients, consultants, and internal teams to define project requirements, deliverables, and timelines.
• Develop and maintain project schedules, budgets, and resource allocation plans.
• Ensure compliance with fire protection standards, regulations, and codes throughout project execution.
• Supervise and coordinate the work of subcontractors, engineers, and field technicians.
• Conduct regular site inspections to monitor progress, ensure quality standards, and address any issues.
• Prepare and present progress reports to stakeholders, highlighting milestones, risks, and mitigation strategies.
• Facilitate effective communication among project stakeholders to ensure alignment and timely resolution of challenges.
• Lead risk assessment and implement strategies to minimize project risks.
• Lead quality initiatives and promote a quality culture across the company, ensuring continuous performance improvement. Coordinate and conduct audits, report outcomes, and ensure corrective actions are implemented effectively.
• Support teams in conducting root cause analysis and incident investigations, and compile reports in accordance with regulatory standards. Train employees on QMS processes and ensure clear communication of quality procedures and responsibilities
• Manage budgets for QMS projects, oversee licensing, and document quality approvals and procedures across allocated sites.

Key Decisions & Dimensions

• All activities in full compliance to all legal / authority requirements.
• All projects (development and execution) are to be designed, executed and performed to a high quality at competitive costs, safely, within schedule, within budget and meet Sembcorp and industry quality requirement.
• All value engineering and strategic plans developed shall ensure Capex remain competitive, are sustainable and meet the company’s business and operational needs.
• All developed and accumulated knowledge / value must be systematically retained within company

Qualifications & Experience

• Bachelor’s Degree in Electrical / Automation / Control & Instrumentation process design and engineering discipline or equivalent
• At least 10-15 years of experience in energy business related engineering management and project management (engineering and construction).
• Experience in Pharmaceuticals, Petrochemicals, power and water utilities as well as renewable energy projects is preferred.
• Good command of multiple energy resource simulation and optimization tools is preferred.

Skills / Competencies & Preferred Characteristics

• Demonstrate critical thinking skill, positive attitude, teamwork, analytical, communication skill, leadership skill.
• Strong self-motivation and work ethic, flexible and thrives under pressure.

Senior Laboratory Analyst

• Singapore Based (Jurong Island - Company transport provided near Jurong East MRT)
• Monday to Friday: 8 am to 4.30 pm
• Salary: S$ 2,800 - 3,200 + Site allowance

Responsibilities:

• Perform raw material, intermediate and final product Quality analysis.
• Interpret and report test results accurately and timely based on test method.
• Supports troubleshooting technical issues pertaining to equipment and analysis.
• Support establishment and maintenance of lab system and equipment validation and calibration.
• Maintenance of quality document and development of quality procedures.
• Provide training to Laboratory Analysts and Process Technicians in analysis instrument procedures.
• Manage and maintain chemicals, reagents, and consumables.
• Support Procurement process and upkeep of inventory.
• Implement and improve analytical and equipment work process.
• Implement and participate in safety and quality improvement activities.
• Other works as assigned by Superior.

Requirements:

• Diploma in Chemical Process Technology or Science related field.
• Min 5 years experience in analytical laboratory environment.
• Hands-on experience with GC, ICP, Titration and polymer testing equipment
• Hands-on experience with equipment calibration and reagent preparation.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Manicurist

• Working Days: off 6 days a month
• Working Time: 11am-8pm by schedule (OT: till 9-10pm if any)
• Working Location: Far East Plaza
• Starting Salary: $2100-$2400 + OT + Allowance + Comm (Gross 4K +)

Job Description:

• Deliver professional nail services including manicure/ pedicure, extension and gel nail services
• Good excellent cleanliness and hygiene practices
• Recommending various nail designs and nail art to clients
• Evaluating the condition of clients’ nails and advising them on proper nail care and suitable nail care treatments
• Sanitizing all nail instruments and equipment before each use
• Ensuring that workstations are kept clean and orderly
• Ensuring that nail supplies are adequately stocked
• Advise clients on nail care and use of products and colors
• Promote and sell nail care products
• Schedule client appointments and accept payments
• Other duties as and when assigned

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

This client company specialized in Precision Surface Finishing Equipment.

Job Highlights

• Location: Ang Mo Kio
• Working days: Monday to Friday
• Working Time: 8.30am to 6.15pm
• Benefits: AWS & Bonus included

Job Responsibilities:

• Perform Lapping & Polishing process
• Machine installation and training

Job Requirements:

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering
• Knowledge of Mitsubishi or Siemens PLC is added advantages
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing
• Training will be provided
• Can read technical drawing
• Able to use the measuring tool example micrometre, height gauge, CMM
• Any knowledge on using Auto Cad

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Seeking for Manufacturing Technicians x 10
• 5 days work shift, 8.5 hours
• Nearest MRT: Upper Changi
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Mechatronic, Microelectronics or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates with or without experience are welcome to apply!

The Job

• Working in the Production Centre and Cleanroom environment
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembled equipment
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechatronic Technician (Electrical)
• Working Location: Loyang Way
• Working Hours: 5 days, Monday to Friday (8.30 am-5.30 pm)
• Salary Package: Basic Salary up to $3,500 + OT pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Perform regular maintenance on mechatronic systems to ensure optimal performance.
• Diagnose and repair mechanical, electrical, and software malfunctions in mechatronic systems.
• Conduct routine inspections and preventive maintenance on machines and equipment.
• Ensure that all systems are correctly configured for optimal operation.
• Collaborate with engineers to integrate new technologies into existing systems.
• Provide technical support to operations and production teams.
• Troubleshoot issues related to mechatronic systems and provide timely solutions.
• Develop and update technical documentation, including maintenance logs and operational manuals.
• Ensure all mechatronic systems meet the required safety and quality standards.
• Implement quality control measures to improve the reliability and efficiency of systems.

APPLY NOW!!!

• A minimum qualification of Diploma or Degree in Mechatronics, Electronics, Mechanical Engineering, or a related field.
• Minimum 2 years of experience in electrical or related field.
• Strong understanding of mechanical, electrical, and electronic principles.
• Excellent problem-solving abilities and attention to detail.
• Strong communication skills, both verbal and written.
• Ability to read and interpret technical drawings and schematics.
• Proficiency in programming languages related to mechatronics (e.g., PLC, C++).
• Able to travel for servicing when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67127 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing (Machinery)
• Position Title: Sales Executive (Machinery)
• Working Location: Clementi
• Working Hours: 5.5 days (Monday to Friday 8.30 AM – 5.30 PM, Saturday 8.30 AM – 12.30 PM)
• Salary Package: Basic Salary up to $3,800 + Transport Allowance + Bonus + Commission
• Duration: Permanent Role

Key Responsibilities

• Assist in planning, leading, and organizing regional market and sales activities of the Company.
• Manage dealers and the local sales team.
• Develop and implement effective sales strategies to achieve sales targets.
• Identify and cultivate relationships with key clients, distributors, and partners.
• Conduct market research to stay updated on industry trends, competitor activities, and customer needs.
• Provide technical information and support to clients, addressing their inquiries and ensuring customer satisfaction.
• Prepare and present sales proposals and reports to management.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Business, Marketing, Engineering, or a related field.
• Minimum 3 years of sales experience in a similar industry.
• Knowledge in Machinery & Generators (Standby Generator/Parallel Generator) would be an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67183 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Position Summary

Preparation of tender and/or invoice for ship-repair and/or conversion projects on the basis of manhours, materials and subcontractor costing both prior to / after award of contract. Discuss with customers/subcontractors/trades regarding scope of work and settle the invoice.

Tasks and Responsibilities

• Understand and evaluate Technical Specification. Preparation and timely submission of comprehensive quotation according to technical specification requirement.
• Preparation and timely submission of Repair Invoice to Owners according to the work carried out. Discuss, negotiate and close out invoices with owners. Following up of ongoing work and updating of Cost and Budget.
• Sourcing of sub-contractors/vendors for ship-repair works and Issue Purchase Order, including negotiation of Subcontractors/vendors Invoices’.
• Maintain proper order of Estimating and invoicing filing.
• Keeping in close contact with Owners and Production alike for updates on repairs on board.
• Close follow up on estimated manhours and actual manhours. Discuss with relevant trade supervisors and revise and/or control the manhours.
• Negotiate with vendors for equipment purchases related to Repairs and Conversions, prepare Sales Agreements / Invoices.
• Prepare and submit profit and loss reports for management reporting.

Job Requirements

• Minimum (2) years working experience in the field of ship repairs.
• Minimum (2) years working experience in the Commercial Department of a medium sized Shipyard.

• Install and configure electronics and communications equipment, ensuring proper setup and integration with existing systems. (CCTV, Card Access, Trunk Radio,UPS)
• Conduct routine maintenance and perform repairs on various electronics and communications devices to ensure optimal functioning.
• Diagnose and resolve technical issues related to electronics and communications equipment, minimizing downtime and disruptions.
• Assist in the implementation of system upgrades and enhancements, ensuring compatibility and improved performance.
• Maintain detailed records of installations, repairs, and maintenance activities, including schematics and technical manuals.
• Provide technical support to users, addressing their queries and assisting them in operating electronics and communications equipment effectively.
• Test and calibrate electronics components and systems to ensure they meet specifications and operational standards.
• Manage inventory of spare parts and tools, ensuring availability of necessary components for maintenance and repairs.
• Ensure all work complies with safety regulations and standards, maintaining a safe working environment.
• Liaise with vendors for the procurement of electronics and communications equipment, parts, and services, ensuring timely delivery and quality standards.

Job Requirements:

• Nitec or Higher Nitec in any technical qualifications
• Able to work outdoors and at heights

Wong Li Qi (Jolin)

R2096313

Summary

• Location: Pioneer (Transport pickup available)
• Company: Europe MNC
• Industry: Explosion Proof Protection of industrial equipment, engines and mobile vehicles.
• Salary: $2,000 - $2,700

Job Description:

• Perform electrical wiring, termination, installation, and testing according to drawings for complex mobile vehicles and engine packages.
• Conduct testing, commissioning, and troubleshooting of electrical systems.
• Ensure compliance with technical specifications and safety standards.

Requirements:

• Minimum O level or NITEC in Electrical Engineering or equivalent qualifications.
• Minimum 2 years of relevant work experience.
• Experience in electrical systems for forklifts or in the oil & gas industry is an advantage.
• Familiarity with explosion protection systems (ATEX/IECEx) is a plus.
• Strong work ethic, good attitude, and ability to work well in a team.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in complian

ROLE PURPOSE

The Senior Electrical Technician conducts mechanical completion, pre-commissioning, and commissioning activities, and supervises the Discipline Technicians.

ROLE CONTRIBUTION

To complete Mechanical Completion, Pre-commissioning, and Commissioning activities in accordance with the project completion plan and schedule, the Electrical Senior Technician should:

• Understand their roles and responsibilities and ensure compliance.
• Comprehend the project completion execution plan from the Discipline Superintendent.
• Familiarize with the Notification of Energization (NOE) Flow Chart.
• Fully understand System Drawings and Walk Down procedures.
• Complete a Daily Report to provide clear visibility to the Discipline Superintendent.
• Attend the Daily Discipline Toolbox Talk to eliminate any hazards and negative environmental impacts.
• Prepare PTW, JSA (Job Safety Analysis), and TRA (Task Risk Assessment) as applicable in GEMS.
• Perform Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team, ensuring compliance with project drawings and specifications.
• Conduct Pre-commissioning Activities (‘B’ Scope ITRs) in line with vendor documentation and specifications.
• Prepare and perform the Operation Test Procedure (OTP) under the supervision of the Discipline Superintendent.
• Supervise Discipline Technicians to ensure they are familiar with project requirements and Company Electrical Group Safety Rules.
• Demonstrate consistent Pre-Commissioning Progress.
• Perform commissioning of electrical systems and equipment, carrying out fault-finding and repair activities as required, in full compliance with the Company Permit-to-Work system and the Company Electrical Group Safety Rules.
• Ensure full compliance with the Company Group Electrical Safety Rules and/or local Yard Safety Regulations.
• Control/conduct Electrical Isolations in strict adherence with the Company Group Electrical Safety Rules.
• Achieve As-Built status of documentation by conducting and maintaining Red-line mark-up drawings for electrical systems. Ensure only the latest revision drawings are used and old revisions are clearly marked ‘superseded’ or ‘discarded’.
• 
  
• Utilize specific tools and test equipment for system commissioning in a safe, competent, and correct manner.
• Maintain control and monitor the continued good condition and validity of company tools and test equipment.
• Assist field service vendors in conducting system commissioning.

This role is vital to ensuring that electrical systems and equipment are in a safe condition and meet safety and technical standards.

EDUCATION, EXPERIENCE & CERTIFICATION

Education:

• Technical College diploma in Electrical discipline or equivalent.

Experience:

• Minimum of 6 years’ experience in construction or commissioning of Offshore products and systems. Experience with FPSO is strongly preferred.
• Proficient with Completions Tools (ECOM) and documentation.
• Knowledgeable in PTW and JSA.

DISCIPLINE SKILLS

Should possess knowledge of and preferably experience in:

• Commissioning tests for power distribution such as HV/LV switchboards, HV/LV transformers, Gas Turbine Generators, Diesel Generators, lighting and small power systems, heater tracing systems, and UPS systems.
• In-depth knowledge of Electrical systems and control wiring, and associated protection systems.
• Knowledge and experience of electrical safety rules and procedures.
• Ability to switch and operate safely medium voltage and low voltage circuits, and issue permits to work identifying isolation points and location of earths.
• Conceptual understanding of commissioning for Oil & Gas offshore electrical equipment.

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

Job Requirements

• Act as first level support for the factory automation team.
• Attend to day-to-day systems issues, perform troubleshooting systematically and come out with solutions.
• Coordinate with equipment and process engineering team to ensure data collected by business systems is accurate, relevant, and critical for monitoring purposes.
• Assist in providing briefing, guidance, and training to end user on the implementation of new feature or enhancement developed by automation team.
• Participate in system enhancement initiatives by collecting user feedback and suggest improvement idea, potentially helping to develop and implement them.
• Create and document best practice on using automations systems for end user.
• Support system testing activities on machine by automation engineer.
• Manage server, computer that fall under automation team responsibility.
• Actively demonstrate a passion for continuous learning.
• Any Other ad hoc duties as assigned.

Job Responsibilities

• Minimum NITEC or Diploma in engineering or related fields.
• Entry level candidates are welcome to apply.
• Must be able to commit to perform 12 hours rotating shift and work in cleanroom environment.
• Good communication and documentation skills
• Strong problem solving and systems issues troubleshooting skills.
• Good Team Player and able to work independently.

Following Requirements are a plus:

• Working experience in Clean Room.
• Experience with SECS/GEM Equipment Automation.
• Basic programming skills with Python

ROLE PURPOSE

The Instrument/Fire & Gas Technician conducts the mechanical completion, pre-commissioning, and supervises the Discipline Technicians.

ROLE CONTRIBUTION

To successfully complete Mechanical Completion, Pre-commissioning, and Commissioning activities according to the project completion plan and schedule, the Instrument/Fire & Gas Lead Technician should:

• Understand their roles and responsibilities and ensure compliance.
• Comprehend the project completion execution plan from the Discipline Superintendent.
• Familiarize with the Notification of Energization (NOE) Flow Chart.
• Fully understand System Drawings and Walk Down procedures.
• Complete a Daily Report to provide clear visibility to the Discipline Superintendent.
• Attend the Daily Discipline Toolbox Talk to address any hazards and environmental impacts.
• Prepare PTW, JSA (Job Safety Analysis), and TRA (Task Risk Assessment) as applicable in GEMS.
• Perform Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team, ensuring compliance with project drawings and specifications.
• Conduct Pre-commissioning Activities (‘B’ Scope ITRs) in line with vendor documentation and specifications.
• Prepare and perform the Operation Test Procedure (OTP) under the supervision of the Discipline Superintendent.
• Supervise Discipline Technicians to ensure they are familiar with project requirements and safety rules.
• Demonstrate consistent Pre-Commissioning Progress.
• Utilize specific tools and test equipment for system commissioning safely and with quality.
• Assist field service vendors in conducting system commissioning.
• Monitor vendor work scope and activities.

This role is essential for ensuring that instrumentation and control systems and equipment are in safe condition and meet safety and technical standards.

EDUCATION, EXPERIENCE & CERTIFICATION

Education:

• Technical College diploma in Automation, Instrumentation & Control, or Electrical disciplines or equivalent.

Experience:

• Minimum of 6 years’ experience in construction or commissioning in Offshore products and systems. Experience with FPSO is strongly preferred.
• Proficient with Completions Tools (ECOM) and documentation.
• PTW and JSA.

Discipline Skills:

• Assisting the yard team with Instrumentation installation and performing Pre-Commissioning / Commissioning for Instruments on Topsides, Vessels, and various packages.
• Knowledge of control systems including ICSS and PLC systems. Experience with Siemens PCS7 DCS and Siemens loop wiring is a strong advantage.
• Proficient in fault-finding and repairing instrumentation/electronic systems and equipment in Control panels and in the field.
• Skilled in installation, calibration, testing, and troubleshooting for all types of Field instrumentation including Temperature, Flow, Level, and Pressure Transmitters, Analyzers, and condition monitoring sensors for rotating equipment.
• Experienced in Installation, Pre-commissioning, and Commissioning of Fire and Gas detection systems and its associated detectors and executive action means (Fire and Heat Detectors, open path flammable and toxic gas detectors, SDV, ESDV, BDV, etc).
• Experienced in installation, calibration, testing, and troubleshooting for all types of valves, especially control valves (pneumatic, hydraulic, or electrical) and various types of actuators and positioners.
• Skilled in Instrumentation cold and hot loop Checking activity.
• Proficient in interpreting all engineering documents including Instrumentation Datasheets, P&IDs, Cause & Effect Diagrams, Loop Drawings, etc.
• Experience using test equipment including pressure calibrators, HART Communicators, Multimeters, etc.
• Familiar with the concept of Commissioning Systems and representing the same using Limits of System Hanover Documents.

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

Responsibilities:

• Conduct general servicing for aircon systems
• Conduct chemical overhaul for aircon systems
• Diagnose, troubleshoot and repair aircon systems
• Propose and upsell aircon services to customers
• Perform site surveys and advise customers on installation details
• Daily reporting and weekly reporting to direct manager
• Any other tasks, when required by the immediate supervisor

Requirements:

• Customer facing, friendly and patient personality
• Must be able to handle physical work due to job nature
• Able to use simple mobile technology
• Open to learning
• Have handyman work experience
• Effective handling of fault / emergency repairs and customer complaints
• Possess Class 3 License would be an added advantage
• 6 days work week (8.30am to 5.30pm)

Role and Responsibilities

1. Supervise and coordinate assigned shift; conduct daily pre-operation meeting with staffs on duties

2. Conduct On-the-Job Training (OJT) to employees including the proper and safe manner of routine cleaning using equipment & machinery

3. Ensure all daily and periodic cleaning works are carried out as per schedule

4. Attend to complaints and ensure customers' satisfaction

5. Check on staff punctuality and discipline

6. Any other duties assigned by Superiors and Clients

Requirements

1. Able to work midnight shift

2. Able to work OT including weekends and public holidays.

3. Able to work in islandwide locations, and able to go to multiple locations daily.

4. Excellent customer service skills and able to interact well with clients

5. At least 2 year’s experience in similar role in cleaning sector

Responsibilities:

1. Supervise and coordinate assigned shift; conduct daily pre-operation meeting with staffs on duties

2. Conduct On-the-Job Training (OJT) to employees including the proper and safe manner of routine cleaning using equipment & machinery

3. Ensure all daily and periodic cleaning works are carried out as per schedule

4. Attend to complaints and ensure customers' satisfaction

5. Check on staff punctuality and discipline

6. Any other duties assigned by Superiors and Clients

Requirements:

1. Able to work midnight shift

2. Able to work OT including weekends and public holidays.

3. Able to work in islandwide locations, and able to go to multiple locations daily.

4. Excellent customer service skills and able to interact well with clients

5. At least 1 year’s experience in similar role in cleaning sector

We are hiring for Process Technicians for a renowned Global MNC in the Pharmaceutical industry.

How You Will Achieve It
• Perform Material receiving, staging, material movement, dispensing, sampling, filter inspection, change out and charging operation as per Standard Operating Procedures (SOPs).
• Perform sampling, intermediate and finished goods pack out as per SOPs.
• Perform pre-campaign set up, post campaign activities and change over cleaning.
• Monitor process operation, trend and alarm using Delta V control system.
• Ensure proper communication and handling over of shift duties.
• Responsible for the updating of Manufacturing Standard Work and Operation Standard work.
• Complete all documentation according to GMP and GDP standards.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to the manufacturing process.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Responsible for preparation and cleaning of equipment for maintenance work
• Take immediate action to resolve any near miss situations.
• Report all actual, near misses and potential accidents for further investigation.
• Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently.
• Perform system transaction and operation such as LIMS, AMPS, SAP, MTS, EMAS, etc
• Complete all required training by attending scheduled training, CBT, OJT, JSA and read and understand.
• Identify and communicate all operating deviations and problems.
• Participate as a member of the Emergency Response Team.
• Assist in project commissioning and validation activities as necessary.
• Perform task in assigned process train, which includes day to day operation, equipment & line cleaning and documentation.
• Perform operator care, identify and address equipment training observations that require mitigation action and/or raise work order to get back to desired condition.
• Develop courses of action and drive implementation of solutions


What Are The Requirements
• Diploma / ITE / NITEC in a technical discipline or GCE ‘O/A’ levels
• At least 5 years’ combined experiences in pharmaceutical, chemical or petrochemical industries.
• Good understanding & knowledge in the use of Distributed Control Systems (DCS).
• Must be prepared to work 12-hour rotating shifts.
• Some commissioning experience in new plant or equipment & in the writing of SOPs would be an added advantage.

If you are interested in exploring this role or other current openings in the market, kindly email me at [email protected] with your resume=.

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

Shift Pattern: 2-2-3 (8am - 8pm/8pm - 8am)

12m Contract (1.5m bonus)

Salary: 2500-3200 + 250 transport / With shift allowances approx. $500-$700

Jobscope:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

For interested candidates, please send your updated resume:

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

R2197171

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

• Perform model conversion setup and execute production buyoff procedure for mass production run
• Assist in setting up new machine and carrying out relocation activities if required
• Perform trouble shooting and analysis on product quality issue and work with engineers on corrective/preventive actions
• Carry out preventive maintenance to material handler machines, automated mobile robot system and post testing process machines such as depaneling, coating and dispenser machines and other automation machines including tooling jig & fixtures
• Initiate and carry out continuous improvement project to improve the manufacturing productivity and efficiency of equipment
• Provide control and monitoring of production machine spare part inventory and indirect material inventory

Requirements

• Min 1 - 3 years' experience in production & manufacturing engineering
• Min NITEC / Diploma in any engineering (Any engineering)

Office Hours / Fixed night shift

2 openings

Medical Device MNC

Up to $3K

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Reading repair manuals and liaising with other professionals.
• Running tests and interpreting results to make effective recommendations.
• Writing up reports, safety regulations, and preventative maintenance plans.
• Sourcing replacement parts.
• Negotiating with suppliers and clients.
• Repairing or replacing faulty equipment.
• Fabricating any components required.
• Providing time and material cost estimates before starting a job.
• Keeping abreast of advancements in your field and attending workshops as required.

Information:

1. Salary range: $2,500 - $3,500
2. Working hours: Mon-Fri, 8.30am to 5.30pm; Sat, 8.30am-12.30pm

Responsibilities:

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Repair, overhaul & start up jobs on chillers
• Liaising with customers to resolve the chillers issues

Requirements:

• ITE in engineering field
• At least 1-3 years of relevant experience
• Able to commit overtime when required

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781