The position holder is responsible for maintaining and servicing a range of well-known diesel generators ranging from 10KVA to 4MW and both HT and LT generators. Reporting to your team Senior Service Tech or Team Senior Service Engineer / leader

Key Tasks:

• Carry out fault finding and diagnosis to a range of diesel generator sets.
• Resolve electrical and mechanical engine problems
• Replacing electrical and mechanical components
• Carry out Full engine servicing
• Carry out site testing, inclusive of load bank testing for both HT and LT generators
• Customer liaison, update and ensure complete customer satisfaction.
• Good housekeeping of both customer sites and company vehicle
• Adhere to company health & safety standards

Requirements

Education

• Minimum Diploma/ITC/NTC in Mechanical or Electrical Engineering - LEW an added advantage
• SEC/SEC (K) Certificate if applicable

Knowledge / Experience / Others

• Previous experience working on Diesel Generators
• With minimum 3 years hand on experience on Diesel Generators
• Completed an apprenticeship in Mechanical Engineering / Electrical Engineering / Diesel or Plant Fitting, or have a relevant qualification in one of those courses.
• Ideally strong knowledge of diesel generators such Cummins / Volvo / Perkins / Mitsubishi / John Deer / Droman / Deutz and any other brands
• Possess a valid Singapore driving license .

Personal Competencies

• Able to use own initiative as well as working as part of a team
• Good customer service and communication skills

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

• As a member of the operation and maintenance team, work to ensure the stable operation of company's internal systems.
• Coordinate with vendors on maintenance contracts for Hardware and Software and renew them as appropriate.

Responsibilities:

• Collect System performance logs and report them on the monthly basis.
• Ensure that the system configuration complies with company's security guidelines at the time of audit.
• Analyse functional requirements and reflect changes to the system following the established guidelines.
• Work with the team leader to ensure that the system configuration conforms to design standards and that the design meets functional and system requirements.
• handle day-to-day user queries (server, network, PC, user account) properly.
• For system troubles, take recovery action (workaround), investigate errors, and consider measures for improvement.
• Produce and maintain up-to-date system documentation (System runbook, IT Inventory list, ID management list, System parameter sheet).
• Identify system issues and work to improve the system.

Requirements:

• Experience in building Windows server systems (from server kitting, application installation to handing over the environment to the development team).
• Operation and maintenance of infrastructure tools (Backup, Monitoring, Anti-Virus, Job management etc)
• Understanding Microsoft 365 (Forms, SharePoint, OneDrive, Teams, Office)
• Experience in Network configuration (ACL, Firewall)
• Experience in building Linux, Unix OS server systems
• Experience in Cloud Services (AWS, Azure, GCP)
• Experience in Database (Oracle, SQL Server, etc)
• Programming skills (Power shell, Shell Script, VBS/VBA, Python)
• Application Development using Power Apps

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

We are looking for a Software Quality Assurance Analyst who are passionate about improving the quality of the services. The QA will be part of an in-house team tasked with developing and maintaining the system.

Responsibilities:

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Create, maintain and improve the automated test framework and test environments
• Conduct testing on new features and file defects
• Perform various tests such as manual/functional/performance/exploratory tests support UATs
• Assist in resolving production cases
• Participate in all agile ceremonies

Requirements:

• Degree in software engineering, computer engineering, electrical engineering or Infocomms-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with various testing tools will be an added advantage:
• Experience with open-source automated testing frameworks (i.e. Robot, Appium, Selenium) or Enterprise level testing tools (e.g. HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

JOB SCOPE:

• Sample preparation for analysis of water and solid samples
• Analysis of water samples using manual titration and colorimetric methods as well as instruments such as TOC, flow injection analyser, UV-spectrometer, and titrator etc.
• Helping to maintain ISO17025 system

Qualifications:

• Diploma holders in chemical process or related fields
• NITEC in Chemical Process with 2-3 years experience in a laboratory
• Good communication skills
• A good team player

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Outsourcing Team
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

• Perform installation/maintanence/repair of machinery and equipment
• Carrying out routine inspection and servicing of machinery and equipment
• Assists in the company's maintenance schedule
• Update maintenance report & calibration report
• Maintain Spare parts and upkeep of Production floor
• Read and write machine manuals in Chinese and English
• Participate in productivity activities and work health safety
• Perform ad-hoc duties as assigned

Requirements

• ITE Engineering or equivilent & above in Mechatronics/Electrical/Mechanical Engineering
• Minimum 2 year of machine maintenance works
• Able to work independently
• Self motivate, proactiveness and objectives driven
• Work place is in Senoko area
• 5.5 days work week

*If you have the experiences, but do not have the necessary academic qualifications, write in with your resume to [email protected]*

Join us at Mastermark!

Mastermark is a leading bird control and wildlife specialist. We provide bird control solutions, animal rescue and management, along with wildlife consulting services locally and overseas.

What you will do:

• Learn about the intricacies and be well versed with the technicalities of bird control
• Bird proofing of buildings and premises, both commercial and residential
• Installation of bird netting and bird spikes
• Work at heights from an elevated work platform or high floors

Our ideal person should have:

• Class 3 driving license required
• Love and enthusiasm for birds and wildlife
• Be physically fit and able to work at heights for long periods
• Relevant technical skills (handy with hand tools and power drills)
• A good team player
• Work at Heights/MEWP certification will be an added advantage

Benefits:

• Annual Leave
• Medical
• Dental

Compensation for this position will be competitive and will reflect your years of relevant experience and expertise.

If this sounds like a career path you'd want to partake, please apply! Shortlisted applicants will be contacted via phone call/ WhatsApp within 14 days.

For non Singaporean/PR, kindly email your resume to [email protected].

Benefits:

• Basic Salary up to $3,900 with yearly increment based on performance.
• 5 days (Monday to Friday) | 8.15am to 6pm
• Our company emphasises on good career progression.

Job Description:

This is a full time role for an Electrical Technician located in Sin Ming Ln. Our clients are doing Engine Servicing, Alternator Servicing, Control Panel Supply and Installation. You will be responsible for repairing and servicing various equipment and engines (Cummins, Volvo, Perkins, Man, Caterpillar, and Deutz) as scheduled by the Service Manager. The individual will troubleshoot and diagnose electrical and electronic circuits, including generators and control panels, and identify necessary parts for quotations. Testing and commissioning of engines and generators are also required. They should be able to read electrical and electronic drawings and conduct equipment surveys to determine the scope of repairs or services needed. Additionally, the role involves troubleshooting and repairing engine wiring harnesses and alternator wirings, constructing or modifying control panels (AC/DC) for engines and generators, and maintaining machinery, tools, and the service area.

Qualifications:

• 1 year relevant experience

• Higher NITEC or Diploma in Electrical or Mechatronics, or any technical qualification in Precision Engineering.
• Familiarity with Mitsubishi or Siemens PLC is a plus.
• Preferred candidates should have at least 2-3 years of experience in operating Precision Engineering machinery or in machinery servicin

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

• Basic UP$2500 + transport allowance + OT + VB

• Company located at Tuas

• Monday – Friday: 8am – 5pm, Saturday 8am – 12pm

• Well Established Oil & Gas Manufacturing Company

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Understand the full requirements of all manufacturing and improvement project.
• Familiar with various laser systems as well as advance welding / cladding technique.
• Experience in robot programming for welding / laser cladding.
• Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production team to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Requirement

• Diploma / Manufacturing Engineering / Certification in Welding or equivalent
• 1 - 3 years of relevant experience in laser cladding or similar advanced welding techniques

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job description

Responsibilities:

• Mix paint and other materials to prepare the right color or texture
• To carry out spray painter process/tasks, including preparation and operations of spray system and setting up of parts on appropriate machines
• To perform production and spray related tasks as and when assigned by immediate supervisor
• Ensure works are carried out according to schedules and are on target to completion.
• Take and adhere to all health and safety precautions

Requirement:

• At least 3 Year(s) of working experience in the related field is required for this position.
• Able to work independently.
• Good communication skills.
• Able to work overtime to complete the project on-time.
• Able to follow the supervisor's daily instructions on-site.
• 6 days work week

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialized rail engineering works, sustainable solutions and FM Consultancy services. With strong presence in various counties across South East Asia, we operate across mission-critical industries - aviation, transportation, healthcare, education, government and commercial.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

• Oversee and lead a team of assistant managers, engineers, technical officers, supervisors and technicians in facilities management for commercial building
• Establish good working relationships with clients and develop trust and confidence
• Establish and maintain quality service standards
• Take charge of theoverall Air Conditioning Maintenance Ventilation system
• Manage the daily AC thermal comfort is within the acceptable limit
• Schedule maintenance activities for ACMV systems, tracking of maintenance works and follow up actions for systems such as chillers, AHU, FCU, fire protection, gas systems etc
• Ensure regular meetings with client's and appointed sub providers
• Handle Tenant’s enquires.
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Manage and liaise with external agencies on new initiatives and major repairs and maintenance works
• Prepare tender documents and specifications, plan, coordinate and execute rectification works
• Responsible for project costing and cost management
• Plan training requirement for staff needs for skills improvement
• Prepare and responsible for annual budget submission, audit report, assessment report for contractors' performance
• Prepare and certify contractors' payment

Requirements:

• Degree in Engineering or equivalent from a recognized university
• At least 10 years of related working experience
• Proven experience in facility management in a large facility
• Able to work Independently and possess good interpersonal skills
• Good communication skills both verbal and written
• Pro-active, independent, able to work with minimal supervision and perform under pressure
• Service orientated mindset
• Strong building and M&E knowledge with hands-on experiences
• Possess high level of initiative and integrity
• Possess strong leadership, quality, good planning and organizing ability
• Has a good safety mindset and displays good WSH behaviors
• FSM Certified will be an advantage.

Job Opportunity: Contract Micro Lab Technician

Location: Tuas
Contract Duration: 12 months (with a 2-month completion bonus)
Salary Range: $3,000 - $3,400 (base)
Transport: No allowance, but a company bus is provided from Boon Lay, Jurong East, CCK, Outram, and Bedok MRT
Working Hours: Monday to Friday, 8:15 AM to 5:00 PM

Job Scope:

• Sample preparation for analysis of water and solid samples
• Analysis of water samples using manual titration, colorimetric methods, and instruments like TOC, flow injection analyser, UV-spectrometer, and titrator
• Maintaining the ISO17025 system

How to Apply:

Machinery Engineer (Mechanical/ Equipment/ RCFA/ Oil&Gas)

12-Month Contract

Location: Jurong Island

Salary Up to $7000 depending on experience

Industry : Oil & Gas

Our client is one of the world's largest publicly traded international oil and gas companies. They are actively looking for Machinery Engineer to join their operations.

Job Summary:

• Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
• Facilitates effective execution of discipline engineering and design routines that align with the team's goals, objectives, and procedures.

Responsibilities:

• Ensure compliance to company's site safety and controls protocols.
• Taking care of day to day issue, drive RCFA and bad actor program. Provide timely inputs to long range items including AMP, Turnaround, technology improvements, etc.
• Facilitate and coordinate discipline engineering technical work products
• Coordination and communication of various issues among the company's and contractor's engineering team that affect the discipline engineering design, safety, and regulatory compliance of the work
• Evaluate / comment work performed by the Contractor and sub-contractors to ensure that the work is being executed in accordance with Company specifications, standards, and regulatory requirements. Includes review of discipline design drawings and documents
• Identify and assess deviations to Contract Technical Specifications and regulatory requirements; ensure that such deviations will be processed according to Company procedures; maintains Deviation Control Log.
• Steward discipline engineering queries from the Contractor and sub-contractors as well as technical information requests
• Keep Lead Engineer or Engineering Manager informed of discipline engineering progress, deviations, and execution concerns
• Participate in discipline engineering reviews at Contractor's and subcontractor's locations
• Drives and promotes capital efficiency in engineering design
• Support internal engineering general interest or Global Practice initiatives as requested by Supervisor

Requirements:

• Bachelor’s degree in Mechanical Engineering or related engineering specialty, or equivalent professional experience
• Broad knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs

Lim Pey Chyi (Apple) - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

3 Months extendable to 1 Year Contract - 1 Month bonus upon completion of 1 Year Contract

Job Description:

• Perform plan preventive maintenance work (PPM) as assigned by the Supervisor.
• Troubleshoot electrical fault and reinstate the power supply and equipment back to normal operation.
• Troubleshoot air conditioning fault and reinstate the air conditioning back to normal operation.
• Repair water pipe burst, mechanical work, medical gases system and other related facilities equipment.
• Any other duties assigned by the Senior Technician/Engineer.

Requirements:

• Min ITE Diploma

For interested candidate, please email your resumes to [email protected]

Denyse Nicole Tan Shuqin (#HDT)

Recruit Express Pte Ltd

CEI No: R1333503

Company EA license : 99C4599

*Location at SATS(those in east side welcome to apply)*

*Training provided*

*Fresh grads are welcome*

The Job:

• To provide preventive maintenance and repair on material handling equipment within a specialized or technical field
• Identify and analyze technical issues through bsystematic troubleshooting methods
• Perform repairs on faulty components, following established procedures and safety guidelines
• Maintain accurate records of maintenance activities, repairs, and equipment history
• Attend ad-hoc jobs as assigned

The Person:

• Diploma or relevant in Mechanical/Electrical Engineering or equivalent
• Must possess class 3 driving license
• Proven experience as a Technician in the relevant field
• Technical knowledge in electrical system, basic engine, and hydraulic system
• Basic IT knowledge
• Able to interpret complex electrical circuit diagrams and problem-solving skills

Working Day: Mon to Fri 8:30 am to 5:30 pm & Sat 8:00 am to 1:00 pm

Location: Woodlands, van provided

Salary: Basic $5000 with transport and mobile allowance+ AWS + Performance bonus twice a year

About the role:

The role of the Project Manager oversees the planning and all project operations. The role managed the progress of the project and ensures quality and timely delivery. The Project Manager will be required to travel to project sites.

Job Scope

• To lead, motivate and supervise the Project and Maintenance Team.
• Responsible for the overall project planning, cost control and project management
• Conduct site inspection prior to commencement of work
• Handle project tendering stages
• Prepare and manage project schedule to ensure project completion within schedule
• Read detailed drawings, understand construction plan and knowledge of fabrication methods
• To prepare and adhere to the annual budget, including maintenance.
• To create/oversee/support/maintain project schedules and budgets for multiple projects at the same time.
• Liaise closely with designers, contractors and vendors to ensure on-time delivery of project within budget and with good quality
• Ensure all plans/documents to landlords/local authorities are approved prior to commencement of work
• Manage the day-to-day progress of works on site and resolve all contractor/vendor and building facility management coordination issues
• Attend regular site meetings and inspections
• Report on project status and take appropriate actions to ensure project progress is on schedule
• Monitor quality and contractor/vendor performance through supervision, regular inspection and snagging
• Ensure work performed on-site comply with the local authority requirements
• Enforce site safety procedures, identify and manage risks arising from the workplace or work process
• Conduct final verification and quality audit for all completed contractor/vendor’s work
• Conduct and complete progressive final snagging and defects clearance
• Work closely with Ops Team on timely projects handover
• Management of post construction issues with Ops Team, consultants, contractors, vendors and relevant authorities and ensure timely rectification
• To assist in the development and management of strategic plans and program initiatives to meet the goals and needs of the Company.

Requirements:

• NTC / Nitec / Diploma in Mechanical, Electrical, Architecture, process engineering or related disciplines
• Minimum 5 years of working experience in the food industrial sector, (e.g. foodcourt and coffeeshop project and reinstatement works)
• Proven record in managing and leading a Project/Maintenance Team.
• Proficient in MS Office and AutoCAD
• Possess Class 3 Driving License

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

• Located near SOMERSET MRT
• Yearly PWM bonus
• Annual Increment
• Bi monthly Salary Payment
• Annual leave, Medical, Insurance
• Training Provided
• Uniform Provided
• SINGAPOREAN ONLY

Responsibilities: • Clean food waste on the crockery (Plate, bowl, spoon, etc.) • Place all the crockery into the dishwasher for cleaning • Other ad-hoc duties as required

Please call or WhatsApp 8896 2338 for more information

• Located near PROMANADE MRT
• Yearly PWM bonus
• Annual Increment
• Bi monthly Salary Payment
• Annual leave, Medical, Insurance
• Training Provided
• Uniform Provided
• SINGAPOREAN ONLY

Responsibilities: • Clean food waste on the crockery (Plate, bowl, spoon, etc.) • Place all the crockery into the dishwasher for cleaning • Other ad-hoc duties as required

Please call or WhatsApp 8896 2338 for more information

• Located near ESPLANADE MRT (EXIT G)
• Yearly PWM bonus
• Annual Increment
• Bi monthly Salary Payment
• Annual leave, Medical, Insurance
• Training Provided
• Uniform Provided
• SINGAPOREAN ONLY

Responsibilities: • Clean food waste on the crockery (Plate, bowl, spoon, etc.) • Place all the crockery into the dishwasher for cleaning • Other ad-hoc duties as required

Please call or WhatsApp 8896 2338 for more information

Heavy Machinery Mechanic

- Hydraulic Excavators

- Rollers

- Dumpers

- Repair on site or at our own yard, depending on location.

- Preparation of machines for rental order or sales order at our own yard.

- Maintenance of machines

Harsh working environment

- sometimes rain

- sometimes under the hot sun

- sometimes sheltered

Job Description:

• Carry out planned preventive maintenance (PPM) as assigned by the Supervisor.
• Troubleshoot and restore electrical faults and power supply.
• Troubleshoot and repair air conditioning issues.
• Fix water pipe bursts, mechanical problems, medical gas systems, and other facility equipment.
• Perform additional duties as assigned by the Senior Technician or Engineer.

Requirements:

• Min. Diploma in Facilities Management
• No need experience , training provided

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

• Salary: $2000 - $3800 ( depend of experience)
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Requirements:

• Minimum Professional Certificate or NiTEC in Electrical & Electronic Engineering / Electrical Engineering
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful.
• Understand engineering drawing and schematic layout are essential
• Possess Class 3 driving license

Job Description:

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Where there is no outdoor repair, you are required to work within the Company workshop

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description

• Enter inspection data and maintain filing.
• Write quality records and checklists.
• Store and maintain equipment.
• Conduct microbiological tests and analyses.
• Calibrate equipment.
• Train new lab staff.
• Consolidate product release documents.
• Generate certificates of analysis.
• Tag product status in the system.
• Manage QR scanning and inventory.
• Scrape QR and tested samples.
• Verify chemical mixing processes.
• Perform other assigned duties.

Requirement:

• No need experience , Training Provided
• Min N/ O Level

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Responsibilities

· Performing laboratory tests in order to produce reliable and precise data to support scientific investigations;

· Carrying out routine tasks accurately and following strict methodologies to carry out analyses;

· Preparing specimens and samples;

· Constructing, maintaining and operating standard laboratory equipment, for example centrifuges, titrators, pipetting machines and pH meters;

· Ensuring the laboratory is well-stocked and resourced;

Requirements

• Min Diploma in CPT, Biotechnology, Biomedical Science or equivalent

• Excellent communication skills is a must

• Meticulous and able to handle numbers is a must

• Proficient in more than one language

• Proficient in Microsoft Office

• Location : Central

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected] (Attn: Lab Technician - Leon)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599