(Expected Commencement will be February 2025)

Responsibilities:

• Assist in troubleshooting, installations, calibration of the instruments
• Respond to client or customer service requests
• Remove defective Instruments from system, decontaminates, disassembles, and cleans instruments and replace defective parts using hand tools.
• Lubricates Instruments and replaces defective wiring and tubing
• Records calibrations made, parts and components used, and inventory of parts on hand

Requirements:

· NITEC / ITE or equivalent is required

· Minimum 3 years of relevant experience in a similar field

· WSQ Safe Lifting / Signalman / Rigger certification is advantage

· Compliance with company safety practices and procedures

· Basic knowledge in Mechanical and Instrument equipment is required

· Good reading, writing and verbal communication skill are required

· Willing to work at island wide customer sites

• Conduct engine disassembly from modular level to piece part level, inspect and clean engine piece parts and hardware, re-assemble engine for testing.
• Perform assembly or disassembly work at section level to meet production schedule.
• Upkeep & maintain assigned equipment, tooling, and fixtures.
• Support and participate in EHS and Continuous Improvement initiatives.

FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Service Technician
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $2,500 + OT Pay + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Maintain and clean test sockets to ensure proper contact with ICs during testing.
• Inspect test sockets for any physical damage and advise customers if a replacement is needed.
• Perform socket pin replacements and ensure high-quality work.
• Maintain good attendance and provide daily updates on job progress.
• Collaborate with team members to meet customer deadlines.
• Be available for overtime work, including weekends, as per the scheduled plan.

APPLY NOW!!!

• Minimum GCE O Level/NITEC.
• Looking for candidates with attention to detail and strong teamwork skills.
• Ability to work overtime when required to meet deadlines.
• Previous maintenance or service experience is an advantage.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69798 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Finding and maintaining vendor contracts.
• Repair, maintenance, and building improvement.
• Workplace cleaning and décor.
• On- and off-site property management.
• Facilities Upkeep and Improvement.
• Supporting People.
• Establishing Efficient Working Processes.
• Strategizing and Integrating Technology Relevant to the Company's Needs.
• Make sure the daily task are of standard and quality.
• Willing to sacrifice personal time for long hours of work.
• Target and goal oriented.

Tribecar is the largest car sharing tech startup in Singapore. Members of the service use their smartphone to gain access to Tribecar's rental cars that are parked at almost 1,000 convenient locations (i.e. right beside MRTs) in Singapore. The service is accessible 24 by 7 with no minimum booking length.

This on-demand service starts from an amazing low price of just SGD 0.5 per hour.

The in-car hardware, backend and frontend software are all developed proudly in-house, in Singapore by fellow engineers!

We are looking specifically for technical assistants who can help with the deployment of our hardware for our cars and our client’s cars. It is an entry position that exposes you the ins-and-outs of hardware development and system integration.

Our Mission

We make mobility accessible to everyone. Through a mixture of clever business strategies and technical prowess, we will commoditize mobility (i.e. cheap and convenient) for everyone. We intend to change how individuals view and use cars, buses, bikes and even trains.

Our Culture

Tribecar is led by technical co-founders, an experienced board and bunch of passionate co-workers. We believe we have the perfect blend of technical brilliance, business savvy and hardworking fun. To a fellow engineer, this means you are given projects that are technically sound, have huge impact on consumers and you will do so with a good crew. You will be treasured for your work and you will not be left alone so you can get some good work done!

Responsibilities:

• Installation, removal and troubleshooting of telematics equipment in the vehicle
• Stock taking to ensure sufficient inventory levels
• Basic system and parts assembly
• Liaising with client to schedule installs
• Monitor and oversee system health

Requirements:

• Basic knowledge in computer operations
• Familiarity with web technologies
• Familiarity with vehicles accessories
• Open to individuals with no experience in this field
• Having class 2B/3 licence would be advantageous

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Position Title : Maintenance Engineer

Salary Range: $3000 - $4000

Working Days: 5 Days (Mon - Fri)

Working hours : 7:30am to 5:15pm

Working Location: Tuas

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Location: Penjuru lane ( Transport provided at Jurong East)

Monday to Friday: 8:00 AM – 5:00 PM & Saturday: 8:00 AM – 12:00 PM

Salary: $3,500 - $4,000

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Roles & Responsibilities

• Plan, direct and coordinate activities associate with a given project. This can include specification review, budget / proposal preparation and bid development to include time frame, procedures to accomplish the project, staffing requirements and allotted available resources for each phase of the project.
• Reviews and understands project scope and customer requirements; communicates requirements and manage the teams including Engineering, Procurement, Construction, subcontractors and other various parties responsible for the success of the project.
• To comply with clients' tendering procedures and conditions, structuring of contract packages and appointment, administration and payment of subcontractors and suppliers.
• To identify, report and update the contract changes and modifications to the relevant parties.
• To direct and manage the performances of responsibilities delegated to the subordinate staff employed in the project.
• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Job Summary:

We are seeking a highly motivated and detail-oriented individual to join our team as an Admin Cum Electrical Engineer. You will be responsible for a combination of administrative and electrical engineering tasks, ensuring the smooth operation of our electrical systems and supporting administrative functions.

Responsibilities:

Administration:

• Manage schedules and appointments for the electrical engineering team
• Handle correspondence and documentation related to electrical projects
• Maintain records of electrical systems, equipment, and maintenance logs
• Coordinate with vendors and contractors for electrical services
• Assist with budget tracking and reporting for electrical projects
• Support administrative tasks as needed

Electrical Engineering:

• Design, install, maintain, and troubleshoot electrical systems and equipment
• Conduct inspections and repairs of electrical systems and equipment
• Ensure compliance with electrical codes and safety regulations
• Prepare technical documentation and reports
• Troubleshoot and resolve electrical issues
• Participate in project planning and implementation

Requirements:

• Diploma in Electrical Engineering or a related field
• Electrical experience prefer
• Basic understanding of electrical codes and safety regulations
• Communication and interpersonal skills
• Experience in Microsoft Office Suite
• Ability to manage multiple tasks and prioritize effectively
• Strong organizational and time management skills
• Ability to work independently and as part of a team

Preferred Qualifications:

• Diploma in Electrical Engineering or a related field
• Experience in the electrical field
• Administrative experience

To Apply:

Interested candidates are encouraged to submit their resume and cover letter to [email protected]

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Operation Technician, Team Leader (Chemical Plant/Incinerator)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Finding and maintaining vendor contracts.
• Repair, maintenance, and building improvement.
• Workplace cleaning and décor.
• On- and off-site property management.
• Facilities Upkeep and Improvement.
• Supporting People.
• Establishing Efficient Working Processes.
• Strategizing and Integrating Technology Relevant to the Company's Needs.
• Make sure the daily task are of standard and quality.
• Willing to sacrifice personal time for long hours of work.
• Target and goal oriented.

Location: Pioneer (Company Transport Provided Islandwide)

Mon – Fri 8am-5.10pm

Up to $2,800

• Install and maintain electrical components (switches, sensors, control panels).
• Install engine wiring and components (oil pumps, water pumps, cylinder heads).
• Assist with installing radiators, engines, alternators, and gearboxes.
• Perform engine timing and valve lash adjustments.
• Prepare generators for load tests and perform safety tests.
• Use diagnostic tools to troubleshoot engine issues.
• Perform general servicing on engines and alternators.
• Knowledge of hydraulic steering systems, marine gearboxes, and PLCs is a plus.

Interested applicants may email resume to [email protected]

Jessie Hoe Huey Miin (CEI Registration No: R1103861)

Recruit Express Pte Ltd (EA: 99C4599)

Job Description

· Carry out installation, testing, overhauling compressors and troubleshooting / servicing of air-conditioning and refrigeration units and other duties assigned by your superiors

· Carry out your work assignments either independently or with a group of workmen locally and/or overseas

· Update daily Progress Tracking Report to update the company on the job completion status

· Co-ordinate the work activities of the team to ensure completion of tasks within given timeline

· Completion of various daily job and closure reports

· Prepare survey/inspection reports

· Estimate labour and materials for a given RHVAC

· Communicate proactively with client/crew on technical issues, solutions and recommendations

· Coach junior team members to enhance their skills level

· Comply to Safety, Health and Environmental standards at all times

· Comply with all safety rules and regulations at all times

· Any other duties assigned by the HOD or Management as and when necessary

Requirements

· Candidate must possess certification in Refrigeration and Air Conditioning studies or Diploma/Degree in Mechanical Engineering

· At least 2 years’ working experience in marine RHVAC systems

· Has in-depth knowledge of refrigeration cycle theory, line components, circuit flushing, refrigerant recovery, pressure testing and vacuuming

· Has in-depth knowledge of electrical circuit diagram and HVAC Controls (Electrical and PLC)

· Good written and verbal communication and coaching skills

· Good analytical skills

· Able to work long hours under hot and humid conditions due to exigency of work on board vessels and in shipyards

· Team player with positive attitude and willing to learn and teach

· Able to work independently

· Proficient in RHVAC troubleshooting

· Good knowledge in compressor overhauling

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

Job Description:

• Responsible for manufacturing & maintaining machinery
• Work directly with the fabrication and maintenance of machinery
• Fabricate, operate and repair machines and machine tools
• Setting up machines prior to production as well monitoring and correcting them as needed
• Work with programmers, engineers and manufactures to ensure that machines are functional and efficient
• Must be able to handle physical work, as well having an understanding of the entire production process from beginning to end, regardless of their specialty area
• Technical and problem-solving skills are also essential
• Operate CNC fabrication equipment following engineering and manufacturing prints and documentation making adjustment for production jobs including; setup and operation of all equipment/cranes with stops, clamps, fixtures, tooling and offsets to produce consistent quality parts

Job Requirements:

• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Maintenance/Repair (Facilities & Machinery) or equivalent
• Good team player, positive working attitude and open to learn new technology
• Detail-oriented, able to multi-task in fast paced environment
• Able to work under pressure
• Willing to travel overseas with short notice

Job Description:

• Responsible for executing all cargo operations on board and marine tasks, including but not limited that related to lifesaving equipment, in a safe, efficient and effective manner, as per the Marine Superintendent or Cargo Supervisor instructions, in compliance with MODEC procedures, national and international regulations and standards, liaising with client, authorities and Onshore departments, thus ensuring the unit's availability, safe operation and proper certification, contributing to the business continuity and its growth.
• Advise and participate in the execution of in all marine related activities, including but not limited to offloading, supply boat operations, cargo handling, cargo and ballasting operations, crude oil washing, tank cleaning, and all associated maintenance of cargo and ballast equipment, in order to ensure their safety and compliance with internal and external procedures and regulations, all those following the hierarchy on board in support to the Cargo Supervisor and to the Marine Superintendent. Likewise, it is co-responsible for ensuring the readiness and availability of the offshore installation's Lifesaving Appliances.
• Contribute to the unit's annual budget planning (expenses and investments), by participating of the corporate planning, providing information about resources, replacements, services and materials needs and other expenses used in its activities, liaising with the Marine team to ensure accurate information.
• Contribute to an effective response to emergencies on board by being part of the Emergency Response Team, participating in all trainings, simulations and acting properly in a real situation, in accordance with MODEC's procedures, guidelines, as well as national and international regulations and best practices, in order to minimize impacts to people, the environment, assets and the company's reputation.
• Contribute to the MODEC’s Permit to Work management systems' implementation, by acting as originator of PTWs and Perform Authority for Marine works, ensuring the correct isolation of equipment and machinery, assisting on enclosed space entry, conducting toolbox talks, guaranteeing all Marine employees and vendors working on Marine activities are properly trained and certified, in accordance with MODEC procedures, and attending, when requested, internal or external audits.
• Act proactively to safeguarding MODEC from noncompliance to legal/regulatory requirements by ensuring MODEC's procedures, management system, internal and external regulations, national and international standards are followed by both marine core crew and 3rd parties on board, participating in audits and inspections in the unit, developing and ensuring the implementation of action plans when required.
• Contribute to the continuous improvement of MdB fleet performance by participating or leading, when required, RCAs, investigations of NOIs/NODs, HAZID/HAZOPs, following up and acting upon CAPAs, sharing lessons learned and promoting a culture of continuous seek for performance and integrity enhancement opportunities.
• Guarantee the proper use of Technical Support departments, by ensuring that technical queries are properly identified, recorded in the system and always directed to Onshore departments for review/study, promoting a culture adherent to the company's systems.
• Contribute to enhance MODEC's procedures, by constantly evaluating the department activities and seeking improvement opportunities, sharing lessons learned with Technical Support departments and Operations leadership, participating in procedures' review, following MODEC's Philosophy, manufacturer recommendation, and personnel experience.
• Contribute to the proper planning of offshore activities by supporting Planner Offshore and Marine Supt in the prioritization and scheduling of services to be performed onboard, participating in discussions along with other Offshore leaderships, when requested, and duly approving all WOs for production works on the CMMS.
• Ensure the proper communication regarding the department activities developed onboard, by filling up, on daily basis, the OIM Daily Report.
• Manage stocks of spare parts, consumables, tools, Marine Gas Oil (MGO Bunker according to the agreement with Client), lubricating oils and chemicals related to Marine Department by requesting the necessary materials for the department's activities in a timely and optimized way. Assist the Cargo Supervisor on conduction of anticipated inspection of the MGO and potable water bunkering hoses, reporting in advance its condition whether it is approved for use or whether it must be removed from service.
• Communicate to the Cargo Supervisor all marine or safety systems' potential and actual incidents or defects, taking positive actions to stop hazards and unsafe behaviors, request technical advice as necessary and prepare, follow up and close out any necessary vendor assistance on board for the Marine department, in liaison with relevant leaderships.
• Contribute so that the vessel always holds valid Flag, Class and Port State certification by participating audits and inspections, supporting the Marine Superintendent and Cargo Supervisor in preparing the marine department and assisting to close out all non-conformities and observations.
• Ensure that unplanned discharges are identified, stopped as soon as possible, and reported following policy, procedures and regulations. In addition, deal with equipment, waste or other materials for disposal in accordance with procedures in place. This also includes the correct conduct of cargo venting, which should be carried out under favorable conditions, aiming to avoid plant trip, according to MdB's procedure.
• Contribute in the housekeeping of entire main deck, around accommodation decks, lay down areas and stores, controlling waste management by hosing down on regular basis and proper garbage collection, segregation and disposal.

Qualifications & Experience:

• High School Degree is required.
• Superior education is mandatory (EFOMM, or specialization course for merchant marine officers’ access degree), except for foreign Seafarers (which follow the regulations of the country of origin).
• Additional advanced training for chemical tanker or gas carrier, and additional experience on those type of tanker, and also the capacity as Chief Officer rank are competitive edge, however, not mandatory for the position.
• Minimum 1 year' experience as officer on watch (OOW) working on board the appropriate type of oil tanker, or chemical tanker or gas carrier /LPGLNG/VLCC/F(P)SOs is required.

Job Duties and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, maintenance of blower systems and electrical/electronic control systems.
• Require travelling within Singapore.

Minimum Requirements:

• Minimum ITE graduate with 1 year experience or without any working experience in Mechanical, Electrical, Instrumentation or Electronic & Computer Engineering field are welcome to apply
• Having own transport will be advantageous but not compulsory.
• Hard worker and able to adapt and learn fast.

Roles & Responsibilities:

• Conduct repair, maintenance, or overhaul of marine diesel engines (2 & 4 stroke) under the guidance of Engineers/Technicians.
• Adhere to all requirements for jobs in shipyards or anchorages.
• Lift and shift heavy engine components to and from the workshop for repair/reconditioning.
• Ensure prompt response and effective communication with customers.
• Perform additional tasks as assigned by the Operation Manager.

Job Requirements:

• A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• At least 2 years of experience in Engine Repair & Maintenance.
• Hands-on experience in troubleshooting, maintenance, and repair is an advantage.
• training will be provided.
• Willingness to work in a shipyard/anchorage environment.
• Ability to work overtime when necessary.

• Good understanding of M&E infrastructure.
• Supervise preventive maintenance activities and ad-hoc works orders on mechanical, electrical, and other installed M&E systems and ensure timely and quality work.
• Experience working in critical M&E facilities or experience in ACMV, electrical or fire systems will be an advantage.
• Able to carry out impact assessment during system fault and technically sound to contain fault to ensure M&E system service continuity.
• Ensure proper escalation in accordance with incident escalation process.
• Carry out work in accordance with site processes and requirements.
• Proactively look out for site abnormalities and possible areas of improvement, recommend solutions and put-up proposal to Supervisor.
• Able to review SOPs, MOPs and EOPs.
• General facilities duties, including monitoring of equipment and report on daily condition.
• Occasionally perform simple repair work such as lamp replacement or door repair.
• Any other duties assigned by Site Supervisor / Engineer Lead.

• Flexible with 24x7 rotating shifts.
• Experience in data centres facilities management will be an added advantage

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid, drying and powder processing, and packaging equipment.

· Back up and maintain PLC, HMI, VSD and other controller program and software version.

· Troubleshoot automation issue by hardware or instrument, program setting/bug and connection issue.

· Knowledge in Alen Bradley PLC, Wonderware SCADA and In Batch system for Troubleshoot automation related in Dry Blending, Filling and Packaging system.

· Evaluation of P&IDs, functional design specification.

· Responsible for performing PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Communicate with Engineering technician on any major process issues as and when required.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

· Provide technical assistance and support regarding all projects, installations, and repairs.

· Maintain smooth communication with different levels of departments and peers.

· Upgrade hardware and software for improved process control.

Requirements:

· Nitec/Higher Nitec/Diploma in Electrical & Electronics / Mechatronics equivalent qualifications.

· At least 3 years of industrial automation & maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge in Automation and predictive and preventative maintenance technologies.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Responsibilities:

• Oversee maintenance of electrical systems.
• Allocate responsibilities and resources for the inspection, testing, repair, and predictive maintenance of equipment and systems.
• Recommend repair strategies and solutions to resolve equipment and system malfunctions
• Manage the maintenance and care of departmental tools, supplies, and equipment.
• Conduct root cause analyses of failures and malfunctions.
• Ensure adherence to the hotel’s Workplace Safety and Health (WSH) and Environmental Management System (EMS) standards.
• Conduct investigations into WSH and EMS accidents and incidents.
• Develop, review, and update operational plans and Standard Operating Procedures (SOPs) regularly.
• Ensure compliance with rules, regulations, and guidelines.
• Perform additional duties and responsibilities as assigned.

Requirements:

• Min. ITE Certificate in Electrical & Electronics or equivalent.
• At least 2 years of experience in similar capacity.
• Able to perform rotating shifts, including weekend and public holidays.
• Team player with positive work attitude.
• Possess good communication and interpersonal skills.
• Has good observation and pays attention to details.
• Ability to work independently and take initiative.
• Strong analytical & problem solving skills.

To facilitate in the job application, please include the following in the resume:-

• Last drawn, current and expected salary.
• Duties and responsibilities for each job.
• Resume in Microsoft Word format
• Reason for leaving for past and present employment.
• Availability.
• Residential area.

Thank you.

David Ong (R1110279)

Adept Manpower (EA License: 22C1006)

https://adeptmanpower.com/

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned Testers and Handlers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible for tracking, monitoring and reporting daily equipment downtime.
• Responsible for daily house keeping and any other responsibilities as assigned.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical/ Mechatronics Engineering or equivalent.
• Specialized knowledge of equipment, testers, handlers, etc is preferred.
• Possess Trouble shooting skills on equipment maintenance and repair.
• Possess strong analysis and good teamwork.
• Good communication and presentation skills.
• Able to commit to either 12-hr permanent day / night shift.

Hotel Maintenance | Bugis | Up to $3k

Location: Beach Rd

Working days : 6 days ; 8 hours/day

Salary : $2000 - $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant