Location: Central Region, Bishan/Amk

• Attractive AWS/Variable Bonus depending on performance
• Optical & Dental benefits as well, up to $250
• Aircon environment generally
• Reputable MNC
• Good and conducive environment to work in
• Colleagues are awesome & fun to work with
• Able to learn and gain experience from the daily processes.

Time:

• 7am-3pm/3pm-11pm (first few months), eventually 4 days of 12 hours

Salary:

• Salary starting from $2300 (based on experience, up to $2900)

Requirements:

• Min Diploma in Engineering
• 1-2 Years of experience in facilities & maintence / no experience welcome too

Job scope:

• Perform continuous improvement of facilities equipment key performance indicators such as % availability, mean time to repair (MTTR) and mean time between failure (MTBF).
• Record all repair, services, maintenance procedures and processes
• Perform preventive maintenance procedures to reduce facilities equipment failures
• Other adhoc assigned

For candidates who do not wish to apply via the site and would still like to apply in a PnC manner, please send your resume or contact [email protected] or wa.me/82888509

EA Personnel Name: Estele Chai
EA Personnel No: R23117142
EA License No: 04C3537

1) Plan, manage, inspect, compile service reports for Routine Maintenance for M&E Systems

2) Prepare quotation via Schedule of Rates for any repairs or new works

3) Attend to Fault calls for emergency/critical M&E systems

4) Attend to any meetings as arranged by superior

5) Any other works assigned by superior

6) Provide Support in project works

Requirement

1) Nitec / Diploma in Mechanical

2) Candidate with no Qualification but with relevant experience may be considered

3) Fresh graduates are welcome to apply

Roles and Responsibility

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
• Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS 130000 and Rolls-Royce's SARRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from Customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source control Repair schemes, and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer/end user requirements.

Job Requirement

Bachelor’s degree in mechanical / Aeronautical / Material or other relevant Engineering discipline with Min. 5 years of Repair development or repair design experiences.

Technical Expertise

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good to have expertise in Nozzle Guide Vanes and Stator Vanes repair.

The performance of the onsite engineer will be evaluated based on:

• Timeliness and quality of repair schemes developed.
• Feedback from team members and stakeholders.
• Compliance with regulatory and internal quality standards.

Overview

Assistant Facilities Manager needed to assist the Facilities Manager in daily operations eg: coordinating maintenance activities for equipment, systems, facilities and to lead a team in provision of maintenance services.

Responsibilities:

• Develop and implement a facility management program including preventative maintenance and life cycle requirements.
• Supervise, plan & organise a team of on-site contractors in carrying out planned and ad hoc maintenance and their work routines.
• Conduct and document regular facilities inspections.
• Ensure compliance with health and safety standards.
• Respond to facility and equipment alarms and system failures.
• Provide prompt response to requests and issues from facility occupants.

Requirements:

• Diploma in Facility Management/Building Services, Property, Estate Management, or relevant discipline.
• Possess good communication skills and customer orientated.
• Possess good adaptability and must be a good team player.
• Possess Fire Safety Manager (FSM) certificate recognised by SCDF would be an advantage.
• Possess a valid Class 3 driving license and own a vehicle would be an added advantage.

Interested applicants please indicate your availability, expected salary and reason for leaving your previous employments in your resume.

We regret to inform that only shortlisted candidates will be notified.

As an Ophthalmic Technician, you will be responsible for the following duties:

• To provide Ophthalmic Investigations

• To provide anterior Segment assessment

• To provide refractive Surgery assessment

• To practice due diligence during all patient interactions to ensure patient safety.

• Any other duties assigned

Requirements:

• Diploma in relevant discipline

• Min 1-year experience

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

Install DSM tools and set up, retrofit, Support

· Global Installation support

· On Call Support

· Perform system installation and Startup of propriety product. Utilize knowledge of CVD to perform start up, including process to sign off qualified application.

· Take ownership, perform repair and troubleshooting hardware and process problem after 24 hrs of the system down until completion.

· Manage system until is accepted by the customers. Perform warranty, paid service, and service contract activities. Troubleshoot and correct process variation of the system.

· Coordinate or perform rework on sub-assemblies and/or systems as a result of testing.

· Test Equipment knowledge of basic pneumatics, gas management systems, leak checking, RF Testing, doing new recipe.

· Assists in the selection and set-up of specialized test equipment and test processes.

· Participates in design and continuous improvement teams that drive improvements on manufacturing operations such as design for cost, design for assembly & test, design for manufacturing, and overall productivity.

We are looking for a skilled Watch Technician to repair and maintain watches. You will work with various types of watches, ensuring they are in perfect working condition and providing high-quality service to our customers.

Responsibilities:

• Diagnose and repair mechanical, quartz, and automatic watches.
• Perform routine maintenance like battery replacements and water resistance testing.
• Clean and restore watches, including cases and bands.
• Source and replace parts for different watch brands and models.
• Advise customers on how to care for and maintain their watches.
• Keep the workshop clean and organized, ensuring tools are well-maintained.
• Maintain accurate records of repairs and services performed.
• Stay updated with new watch technologies and repair techniques.

Requirements:

• Experience as a Watch Technician or similar role.
• Knowledge of watch mechanisms and repair techniques.
• Strong attention to detail and precision in handling watches.
• Good problem-solving skills.
• Ability to use watchmaking tools and equipment.
• Good communication skills and customer service ability.
• Relevant training or certification in watchmaking (preferred).
• Experience with luxury or high-end watches is a plus.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

CCTV Technician | Up to $3.5k | Redhill

Salary: $2,000 - $3,500

Address: Lower Delta Rd [3 Bus stop from Tiong Bahru MRT]

Working hours: Monday - Friday / 8.45am to 6pm
Alternate Saturday / 8.45am to 1.15pm

Job Description:

• Provide pre and post-sales support on products and solutions including network system
• On Site installations and commissioning co-ordination of security system
• Troubleshooting / maintain / service of security system at clients’ premises
• Work closely with project team to ensure fulfilment of network and technical aspects
• Pro-actively support other tasks (including ad-hoc projects) as assigned
• Able to trace / rectify / installation of network cable
• Training will be provided.

Job Requirements:

• ITE / Diploma graduate
• Must possess local class 3 manual driving license.

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Building Technician | Up to $2.5k | Islandwide

Working Days: 6 days
Working Timing: Shift, based on duty roster
Working Location: Islandwide, based on project available or mobile team
Starting Salary: $1800 to $2500 + OT

Responsibilities & Duties

1. Coordinate and assist in the daily operation of the M&E services, such as carrying out all planned maintenance schedules and periodic inspection, and up-keep of the common area.
2. To perform weekly checks on the estate’s M&E system, including minor troubleshooting on failure of systems.
3. To carry out minor troubleshooting on any failure on the M&E systems.
4. To maintain a proper stock control for all mechanical/electrical accessories and materials purchase.
5. To respond to ad-hoc complaints received from the Management office from time to time.
6. To respond and attend to all emergency calls, and for reinforcement of manpower during minor breakdown of M&E equipment within the estate’s common area.
7. To ensure that service contractors conduct the servicing properly and in accordance with the service contract.
8. To follow external contractors that are at site to carry out routine servicing.
9. To attend to any other job function on M&E related issues that may be assigned from time to time.
10. To carry out minor items of repair, such as repair of fixtures/fittings and touch up painting.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Report for work daily at Office located at Tampines North Drive 1.

Working days/time: Mon - Sat (5.5 Days Work Week)

• Mon to Fri from 8.30am to 6pm.

• SAT UNTIL 1PM.

• PH and Sunday Off.

• OT will be paid after 6pm or Sat after 1pm.

Gross Monthly Salary:

• S$2,100 before confirmation.

• S$2,300 after confirmation.

• Monthly CPF contributions.

• 7 Days Annual leave and 14 Days Medical leave after confirmation (Based on the number of completed months you have worked).

• Medical benefits after confirmation.

Key Responsibilities:

• Perform basic storekeeping duties.

• Perform TV maintenance checking, repairing duties.

• Assist in loading and unloading of goods.

• Assist in inspection and preparing delivery orders.

• Inhouse stock inventory (TV, TV Brackets and AV appliances).

• Assist in other ad-hoc operational duties.

• Follow company regulations and safety standards.

Requirements:

• Singapore Class 3 Manual Driving Licence required.

• No experience is required as training will be provided.

• Physically fit and able to load and unload av products.

• Punctuality with good attendance.

• Able to speak & write in basic English.

• Able to start work immediately.

• Only accepting applicants submission from this portal. (DO NOT CALL OFFICE)

Job Scope

• Directly responsible for the laboratory processing, ensuring proper handling, labeling, and storage preparation in accordance with standard protocols.
• Maintain the laboratory in a clean and organized condition.
• Generate clinical reports as required.
• Collaborate with the Laboratory Manager and Assistant Laboratory Manager to ensure smooth operations.

Requirement:

• Education and Experience: Degree in Biomedical Science or a related discipline.
  Minimum of 2 years of experience in one or more of the following areas: blood banks, tissue banks, testing laboratories, pathology, research, or commercial labs.
  
• Technical Skills: Proficiency in aseptic techniques; experience in tissue or plant culture and handling liquid nitrogen is a strong advantage.
  Familiarity with maintaining quality records is preferred.
  
• Personal Attributes: Strong sense of responsibility with a proactive and reliable work ethic.
  Effective team player with the ability to work independently and with minimal supervision.
  
• Work Schedule: Five-day workweek, including weekends and public holidays.
  Working hours: 9:00 AM to 6:00 PM.
  

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Shift Pattern: 2-2-3 (8am - 8pm/8pm - 8am)

12m Contract (1.5m bonus)

Salary: 2500-3200 + 250 transport / With shift allowances approx. $500-$700

Jobscope:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Interested applicants please email a copy of your resume to [email protected]

Tele @jesswongie OR WA 96503173

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Responsibilities:

• Perform troubleshooting, repair, overhaul of aircraft engines
• Dismantle aircraft engines
• Testing and maintenance of engine equipment
• Perform simple operational checks on aircraft system

Other Information

• Tertiary Education in any Engineering Field
• Has Strong Passion for Aerospace Industry
• Able to commit for long term

If you're ready for an exciting challenge and want to be part of a forward-thinking team, apply today!

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may send their resume to [email protected] or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R1767800

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

Salary: Up to $3.8K

Job Scope:

• To handle and manage daily operation and rectifications of faults, conduct regular audits of building and M&E facilities and works, ensure quality works are carried out on time schedule.
• Attend to all service requests such as changing faulty lightings, ceiling boards and other repair works in premises.
• To plan and oversee the appointed contractors in maintenance and repair works, ensure works are completed as per contract requirements. Physically inspect and approve work permits for all kind of activities performed by contractors, work closely with contractors to perform preventive maintenance and system troubleshooting and ensuring good Safety/GMP practices are compiled.
• To assist the Engineering Manager to implement the quality maintenance program and comply with regulatory requirement, global policies and EHS requirement.
• Respond and attend to emergency calls and/or faults during office hours, after office hours, weekends, and public holidays.
• Management of Assets and Equipment inclusive of spare parts inventory, monitoring of the stock card for use of consumables e.g. air filters.
• Monitor and carry out daily routine checks on operations of building facilities (e.g. M&E, BMS System) in accordance with Authority requirements.
• To effectively communicate with internal stakeholders from executive management, internal business units, clients, external supplier partners and vendors.
• Conduct engineering investigation for Quality related deviations and gap analysis to identify areas for improvement as well as implementing corrective and preventive actions to enhance performance level and improve robustness to meet cGMP requirement and optimization of efficiency.
• Any other duties as assigned by the immediate Superior from time to time.

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

CCTV Technician

Salary: $2,000 - $3,500

Address: 3 Bus stop from Tiong Bahru MRT

Working hours: Monday - Friday / 8.45am to 6pm
Alternate Saturday / 8.45am to 1.15pm

Job Description:

• Provide pre and post-sales support on products and solutions including network system
• On Site installations and commissioning co-ordination of security system
• Troubleshooting / maintain / service of security system at clients’ premises
• Work closely with project team to ensure fulfilment of network and technical aspects
• Pro-actively support other tasks (including ad-hoc projects) as assigned
• Able to trace / rectify / installation of network cable
• Training will be provided.

Job Requirements:

• ITE / Diploma graduate
• Must possess local class 3 manual driving license.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

ASEANet Manpower Consulting Is a boutique search firm and our founder and consultants have years of experience from various industry and businesses background. Our expertise include Executive Search, Permanent Placement , Career Transition and Talent Development.

We connect outstanding people with the best Innovative Companies.

ASEANet Manpower Consulting offer different specialisms including:

Accounting & Finance, Admin & Secretarial, Banking, Construction, Engineering, Events, Education, Financial, F&B , Healthcare & Medical. , Supply Chain & Logistics, Manufacturing, Retail, and Information Technologies. With our professional recruitment service, we can assist you with your desired career path.

Contact us for a FREE Consultation.

We believe that YOUR SUCCESS - IS OUR MISSION.

Our client are looking for next team members to join their growing team:

Job Description:

•Maintain housekeeping of workstations and daily upkeep of equipment

•Perform cleaning, masking, blasting, painting and oven stoving of aircraftparts

•Maintain housekeeping of workstations and daily upkeep of equipment

•Perform fittng, bonding, dressing riveting and cleaning of aircraft engine components

Requirements:

•Minimum Nitec / Diploma preferably in Engineering or relevant certificates.

•At least 2 years relevant working experience•Good interpersonal skills

•Candidates with welding, paint shop, NDT, Inspection skills will be an added advantage

Chua Mui Khim

( EA Registration Number : R22104766)

ASEANet Manpower Consulting Pte Ltd

(Co Reg : 202141565E / EA License: 21C0866)

We regret to inform that only shortlisted candidates will be notified

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Engineering / Manufacturing
• Position Title: Maintenance & Service Technician (Chiller / ACMV)
• Working Location: Tuas
• Working Hours: 5.5 days (Mon to Fri 8.30AM – 5.30PM, Sat 8.30AM – 12.30PM)
• Salary Package: Basic Salary up to $4,000 + AWS + Bonus + Transport Reimbursement
• Duration: Permanent

Key Responsibilities

• Perform regular inspections and maintenance on chiller systems to ensure optimal performance and prevent breakdowns
• Diagnose issues with chiller equipment and execute repairs efficiently to minimize downtime
• Continuously monitor chiller systems for performance issues, ensuring timely resolution of any problems
• Maintain accurate records of maintenance activities, repairs, and any modifications made to chiller systems
• Adhere to all safety protocols and industry regulations during maintenance and repair activities, promoting a safe working environment.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• NITEC or Diploma in Mechanical Engineering or a related field
• At least 2-3 years of working experience in chiller maintenance and repair servicing
• Strong understanding of chiller systems and components

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72147 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Summary of the role

Carrying out maintenance, inspection and basic repair work for company’s electrical and mechanical vehicle systems

Task and Activities for the role

• Experience with prestige vehicles

• Inspection of components for wear and tear

• Repair/ replacement of broken/ worn out parts

• Verification of vehicle functions and its subsystems

Reporting and Interface

• Provides information to the supervisor about preapproval for additional repair

• Notifies the Service Advisor immediately of work interruptions as a result of additionally required work, complications, missing parts or missed deadlines

Acts diligently according to guidelines

• Uses checklists/ repair instructions, tools and test equipment adhered to current guidelines

• Has co-responsibility for customer satisfaction by optimal technical solutions on customer vehicles

• Handles tools, special tools work clothing etc. properly

• Uses equipment cost- effectively

• Hands over dismantled, replacement or warranty parts to warranty department cleaned and labelled

• Disposes waste according to local legislated guidelines

• Observes accident prevention guidelines and reporting incidents to his or her supervisor

Qualifications

• Technical training (as automotive technician, industrial technician)

• Vocational training at an automotive dealership or at a similar facility

• Driving licence

• Team orientation and customer focused attitude

• Have the required experience and skills level to carry out maintenance , inspection and basic repair

5.5 days

Mon to Fri 8.30am - 5.30pm

Sat 8.30am - 12.30pm

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Days and Timing: Mon to Fri (8.30-5.30pm), Sat (9am-1pm)
• OT max up to 4 hr/day if required
• Working Location: subjected to Jobsite
• Salary: $1600 to $2000 (subject to experience)

Job Description:

• Perform regular service, maintenance, and repairs on refrigeration systems for commercial or industrial application, including Freon or Ammonia systems.
• Attend to urgent call-out to jobsites.
• Follow instruction from superior and project manager for all job sites execution.
• Follow safety protocols at jobsite.
• Conduct service report for every jobsite.
• Perform administrative duties assigned.

Requirements:

• Diploma in Engineering, Construction and Building management or related fields.
• Must have at least 2 years of hands-on experience in Refrigeration system; Cold Room, Electrical, Air-conditioning or related fields. Experience in blazing, compressor, evaporator and condenser systems.
• Class 3 driving license (preferred).
• Possess Certificates in safety, electrical or related.
• Flexible and adaptable to working at different jobsites.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Salary: $2,000 - $3,500

Address: Lower Delta Rd, Singapore [3 Bus stop from Tiong Bahru MRT]

Working hours: Monday - Friday / 8.45am to 6pm
Alternate Saturday / 8.45am to 1.15pm

Job Description:

• Provide pre and post-sales support on products and solutions including network system
• On Site installations and commissioning co-ordination of security system
• Troubleshooting / maintain / service of security system at clients’ premises
• Work closely with project team to ensure fulfilment of network and technical aspects
• Pro-actively support other tasks (including ad-hoc projects) as assigned
• Able to trace / rectify / installation of network cable
• Training will be provided.

Job Requirements:

• ITE / Diploma graduate
• Must possess local class 3 manual driving license.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

* Monday to Friday, 9am - 5.45pm

* Location: Tuas

* US MNC company

* Permanent role

Our client is a chemical manufacturing company which specialist in electronic chemicals

Responsibilities:

• Conduct plating chemical testing & analysis
• Conduct product functional performance testing & measurement
• Assist engineer to perform process characterization studies
• Install and maintain plating chemistry and equipment
• Manage lab and responsible for chemical & equipment spare parts procurement
• Provide technical support to other departments
• Support sales on their in-house study to support customer requirement
• Support customer qualification and set up of analysis
• Able to support equipment and analysis troubleshooting at customer site.
• Comply to ISO defined procedure

Requirements:

• Diploma in Chemical Engineering or Chemical Process Technology
• Proficient in Microsoft Office Application
• Proficient in Basic Chemical Analysis Methodology
• Knowledge of electro-chemistry / plating / corrosion
• Familiar with lab analysis
• Willing to travel to customers’ office (local and overseas) for technical servicing and support

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Job Responsibilities

• To perform servicing/repairs and maintenance of water dispensers
• To assemble and prepare water dispensers
• To install water dispensers and change filters
• To assist and be responsible for the inventories in the warehouse
• To communicate with clients on any operational enquiries and feedback
• To provide technical expertise to support other departments such as sales
• Continually find ways to improve process and workflow efficiency
• Other ad-hoc works as assigned by superiors

Preferred Qualifications and Qualities

• Minimum 'O' levels or NITEC in Mechanical Engineering / Mechatronics
• Problem-solving skills to inspect and identify any root cause of equipment problems
• Experience in all relevant industries such as aircon, refrigeration, plumbing, electrical services, and water dispensers will be an advantage
• Class 3 driving license required
• Great learning attitude
• Independent and responsible