Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Company: Chemical Manufacturing Company

Location: West

Position: QC Technician (Job ID: 18811)

Working hour: Mondays – Fridays, 8.30am – 5.30pm

Job Description:

1. Reports directly to the section engineer and/or designate
2. Shall carry out all laboratory tests and measurements accurately in accordance to procedure and upkeep/maintain the instruments/facilities in good running conditions
3. Shall prepares standards and reagents for analysis in accordance to procedure and ensure that all related documentation is maintained
4. Shall perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
5. Shall handle ISO Documentation/Raw Data for QA Department
6. Shall accurately update internal Statistical Process Control (SPC) charts and monitor the charts
7. Shall assist in training for staff for QC Section-related activities when required
8. Shall maintains and checks inventory of all storage samples and ensure all relevant records are maintained
9. Shall perform receiving of QA department purchase and ensure that received items and all related document are correct at the point of receipt
10. Shall assist in audit preparation
11. Shall support the QA Section in its activities as and when required
12. Shall be involved in near miss identification and provide work improvement (QEHS) suggestions
13. Shall maintains the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
14. Shall strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
15. Shall performs any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

Job Requirements:

1. Candidate with Diploma in Chemical or science discipline preferred
2. Experience with analytical instruments like ICP-MS, AAS, etc.
3. Ability to communicate clearly in both writing and verbally and good interpersonal skills
4. Proficient in Microsoft Office Tools

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Lee Xin Hui

EA Registration No: R22108046

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246 EA License No:90C4069

Job Descriptions:

- Perform Weapon Systems Preventive and Corrective maintenance works at SAF bases.

- Provide support services in operation exercise.

- Peform Material, Infrastructure and Repair Management .

- Perform functional check and/or repair on testers and unit under Test.

- Liaise with customers on maintenance schedule, planning, monitor, control and execution of works.

Job Requirements:

- Diploma in Electrical / Electronics / Mechatronics / Mechanical Engineering preferred.

- Able to interpret schematics, technical manual and drawings for maintenance works.

- Good verbal and written communication skills.

- Ability to use analytical skills and a "hands-on" person.

- Good interpersonal skills, proactive and work well with others.

- Posess Class 3 driving licence

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Description

• 3-8 Years Experience in Product Desiging and Machining
• Sound Knowledge in Unigraphics (UG)NX
• Able to Programming CNC MACHINE 2D and 3D
• Experience to operate the CNC Milling and Conventional Machines
• Multi task work
• Independently work
• Need to wrok rotating night shift

Requirements

Diploma

Singaporean only

Contact

Ravi +65 90627715 (WhatsApp)

Mom Lic NO-08C4221 (Reg No R1102427)

1. Perform corrective and preventive maintenance of Expressway Monitoring and Advisory System
2. Coordinate and perform corrective mainteanance such as diagnosis and repair of use of Security and Display Systems
3. Ensure proper inventory control of spares and materials
4. Ability to communicate in a team environment
5. Computer literacy and able to work shifts
6. To supervise a team of technician

Requirments;

1. Diploma and above in Electronics/Electrical Engineering
2. Must possess a class 3 driving license

You will work closely with the Property Manager to provide excellent support to estate residents in executing daily estate inspections to ensure high quality standard of horticultural, maintenance and implement improvement works. In addition, you would need to manage and attend to residents/tenants’ feedback as well arrears cases.

1. To cover the any vacant position if there are resignations of Property staff
2. To conduct additional inspections at the estate to complement the existing property teams
3. To rotate among the divisions to solve estate issues, for example help out in divisions which did not do well in TCMR.
4. To assist Property Operations Specialist to conduct internal audit operations
5. Any other duties assigned by GM/DGM

Job Requirements

• Minimum Diploma in Real Estate/Facilities Management/Building Services, Mechanical or Electrical Engineering or equivalent.
• A teams player with good interpersonal and organization skills.
• People-oriented with a willingness to learn.
• Able to work under pressure and work beyond normal working hours and on weekends/public holidays.
• Working on Monday to Friday & Alternate Saturday. (5.25 wk week)
• Working Hours: Mondays to Fridays: 8.30am to 5.30pm & Saturday: 8.30am to 12.30pm

Interested applicants, please submit your detailed resume stating your current and expected salary, and reasons for leaving current and past employment.

We thank you for your interest in the above position and regret that only short-listed candidates will be notified.

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

The Customer Services Technician (CST) primary responsibility is to deliver customer service experience. The goal is to drive success that improves customer satisfaction, maximises customer retention and increases profitability.

The CST will actively participate discussions across departments, Sales & Marketing / Supply Chain / Engineering / Customer Services, maintaining responsibility of timeliness and effectiveness of the Customer Services function.

The role will be heavily customer facing, and therefore the CST will be an ambassador of Dedienne Aerospace, its brand, ethics and business vision.

• Regional coverage of customers in Asia Pacific less China and South Asia
• Provide service and customer services in-house, during field visits or dispatches with tact and courtesy
• Responsible for quality on-site installation, commissioning, maintenance, reparation, modification and test tasks at customers’ sites
• Diagnose errors or technical problems and determine/render proper solutions
• Practise continuous improvement by keeping up-to-date knowledge of new products/services, equipment modifications/maintenance/reparation and related technical information
• Take initiative to promote organisation’s products/services while performing field visits or dispatches
• Verifying, by visual and technical inspection, incoming goods in accordance to purchase order specifications and conformance with refining practices which requires positive material identification, testing and measuring, etc.
• Tagging all incoming material required for inspection and locating
• Locating all incoming stock and non-stock material to appropriate bin locations or specified storage areas after receipt verification
• Determining methods of storage, identification, and stock location, considering commodity, dimension and weight limit, turnover, floor loading capacities, and required space
• Pick requested stock material via electronic pick lists or verbal, emergency requests and delivering to specified areas manually, in accordance to weight/body limitations, order picker, or forklift
• Packaging of stock and non-stock material in accordance to specified procedures in preparation of shipping
• Shipping out material or non-conformance receipts via vendor trucks, air/sea/land freight in accordance with specified procedures
• Stock taking in accordance with specified area procedures to assure accurate inventories
• Assist with general logistical arrangement, documentation and filing
• Storage and filing of all paperwork associated with operational responsibilities
• Substantial business travel, approximately 30% of time, will be expected to fulfil the Customer Services Technician role
• A Visit Report must be completed and sent to all relevant parties in a timely manner

• Candidate must possess at least a Diploma in Engineering (Aviation/Aeronautics/Astronautics/Mechanical) or equivalent
• And / Or at least 2 year(s) of working experience in the related field is required for this position
• Applicants must be willing to work in Seletar Aerospace Park

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Scope:

• Perform routine compounding of fragrance and oil samples
• Ensure compounded samples meet quality standards
• Maintain and track stock level of laboratory equipment and supplies
• Ensure that bio-hazardous materials are disposed safely
• Perform standard laboratory tests in according to prescribed procedures and recording of test results
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma in Pharmaceutical Sciences or any other equivalent certification
• Able to start work immediately or within a short notice
• Prior internship experience is an added advantage

Interested candidates kindly send in your resume to: [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technician (Electronics/ Electrical)
• Working Location: Serangoon North
• Working Hours: Monday to Friday, 8 am – 5.30 pm
• Salary Package: Up to $3,000 + Attendance Allowance + Transport Allowance + Bonus
• Duration: Permanent

Key Responsibilities

• Testing, tuning and troubleshooting PCA or products
• Produce output as per production target

APPLY NOW!!!

• Minimum Nitec in Electronics or its related discipline
• At least 1 year of relevant work experience in electronics manufacturing environment
• Able to perform soldering and tuning of PCA and products
• Able to troubleshoot PCA and products, read schematic diagram
• Able to use simple equipment to troubleshoot such as multimeter and oscilloscope
• Understanding of basic electronics and RF telecommunication

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65190 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: 4 days, 12 hours Rotating Shift (2-day shifts + 2-night shift)
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment
• Carry out and rectify facilities-related matters

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Must be prepared to work on a 12-hour rotating shift
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

• In charge of repair, maintenance, and troubleshooting of machinery onboard.
• Conduct wiring and connection of electrical cables.

Requirements:

• Nitec in Electrical engineering or equivalent
• At least 2 years of experience in electrical schematics diagrams and symbols.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Chemical Process Technician

Location: Tuas
Salary : Up to $2.4k
Working hours: Mon – Thurs, 7.45 a.m. to 4.45 p.m/ 7.45 p.m. to 7.45 a.m.
Duration: Long term

Job Scope:

• Countercheck raw material needed for the mixing.
• Maintain the tanks and surrounding area free of dirt.
• Coordinate with group to do inline cleaning in place and steam in place.
• Documentation for RMR including bubble point test and chemical weighing
• Regeneration of RO water system

Job requirement:
- Min Nitec/ Diploma in relevant field

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

• Position : ALL WELCOME - Maintenance Specialist (Must come from Oil and Gas Industry/ Repair)- Tuas
• Location : Tuas
• Working hours : 5 days - Monday - Friday: 7:30am to 5:15pm
• Salary (commensurate with experience) Up to $4200 (Basic up to $4000 +$110 Transport Allowance) + Performance Bonus
• Duration : Perm
• Industry : MANUFACTURER AND REPAIR OF MACHINERY

Main Responsibilities:

• Monitor the machines and company equipment operational performance and condition
• Conduct preventive maintenance to machine and company equipment as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipment
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Requirements

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years’ experience in machine repair and maintenance
• Have training with Quality Management and its related Quality Procedures is an advantage
• Knowledge to repair and maintain machines e.g. CNC Turning, Milling, Honing, Drilling is an advantage.
• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Email your resume to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

EA No: 13C6684

Reg no.: R2197224

Job Duties:

• Managing all administrative and secretarial responsibilities in Singapore office
• Maintain the office condition and liaise with facility management vendors
• Prepare materials and documents
• Handles simple accounting duties
• Manage vendor payments, expense claims for employees, correctly book corporate card transactions and own the billing process
• Meeting Room calendar management
• Liaising with building management for building entry permits, building repairs, etc.
• Organizing internal/external events
• Stationery – ordering and maintaining supplies
• Liaison with vendors
• Assisting travel and accommodation arrangement plus visa application and renewal

Job Requirements:

• Candidate must possess at least a Diploma/ Advanced/Higher/Graduate Diploma, in Finance/accounting related
• At least 5-8 year(s) of working experience in the related field is required for this position
• Strong communication skills and able to work in fast paced environment
• Full-Time position(s) available.

Interested applicants please send your resume in MS Words format and attention it to Tan Joanna (R1104661)

Short listed candidates will be notified

www.ambition.com.sg

EA Registration Number: R1104661

Data provided is for recruitment purposes only

Business Registration Number: 200611680D. Licence Number: 10C5117

• Maintain, troubleshoot, and repair container handling equipment at PSA, depots, and workshops.
• Conduct scheduled preventive maintenance services for equipment.
• Respond to customer breakdown calls promptly.
• Assist in assembling, installing, testing, and commissioning new equipment.
• Work on various equipment types: Reach stacker, empty container stacker, terminal tractor, and heavy forklift.

Requirements:

• ITE in Mechanical/Electrical/Automotive or equivalent.
• Possess Forklift or Class 3 driving licenses.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Reviews Client's technical documentation and requirements.
• Controls of subcontracted discipline engineering documents.
• Defines engineering requirements.
• Prepares the technical documentation for instrumentation and systems requisitions and performs the technical evaluations.
• Provides technical support to Project group.
• Optimizes instrument systems ensuring minimal cost and simplification in compliance with the required performance.
• Prepares specifications for instruments, systems (DCS, ESD, F&G) and installation.
• Prepares functional analysis (control, ESD, F&G).
• Implements instrument detail design on P&ID's.
• Prepares instrument data sheets and loop diagrams.
• Prepares instrument material take-off.
• Implements detail engineering activities (layouts, routings, supports...).
• Performs the F.A.T.

RESPONSIBILITIES

• Coordinate maintenance tasks for equipment and offer technical support for both preventive and corrective maintenance to ensure optimal functionality and safety.
• Offer technical guidance for preventive and corrective maintenance procedures.
• Ensure meticulous maintenance records are maintained within the designated section.
• Aid in investigating damages or accidents and preparing required reports.
• Collaborate with equipment owners to address maintenance concerns and provide follow-up as needed.
• Perform routine patrol checks to oversee maintenance activities.
• Collaborate with other departments, including those in Japan, on maintenance-related matters.
• Develop, monitor, and regulate work procedures.

REQUIREMENTS

• Minimum Diploma in any technical / engineering discipline.
• Candidates with at least 1 year of maintenance sales support experience is ideal. Fresh Graduates are encouraged to apply.
• Candidate must be comfortable to provide assistance in handling of technicians

Kindly include the following in your resume:

1. Current Salary
2. Expected Salary
3. Availability
4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Develop strategy, managing and collaborate with distributorship in local and South East Asian to achieve sales budget, Key performance Indicators and monitoring marketing activities.

• Drive collaboration with internal and external stakeholders for current business expansion, new business development and implementation strategy including budget and cash-flow projection, milestone and required resources based on market demand evaluation and strategic fit in SEAI region.
• Develop and implement a relationship management plan for strategic, complex potential accounts to build key relationships at local and regional levels.
• Lead regular high-level communication with Japan’s factory, sales department and distributors in the region for project development strategy and planning
• Manage financial and budgetary requirements of sales and service operations, continuous improvement and change management initiatives for time, cost and quality improvements.
• Drive team performance, train and develop team members in enhancing technical product knowledge, management of distributors and succession planning.

Requirements:

• At least 15 years of sales and management experience in light construction machinery, good knowledge in import & export businesses preferred.
• Possess good knowledge in technology market and experience in digital solution enablement including consultation, design, and or implementation.
• Excellent interpersonal communication skills.
• Excellent presentation and leadership skills.

Permanent. 5 days. Alternate sat 4 hr. Jurong

Our client

A very profitable 80yrs old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Job scope

• To Troubleshoot/ repair machinery/equipment faults in the production areas. Familiar with rotary filling machinery, liquid processing equipment and powder filling machine, fabrication machine, welding machine
• To maintain and trouble shoot of manufacturing equipment n parts (valves, pumps, Gaskets, gear box, conveyor belt system, switch box).
• To Support mechanical engineer in calibrations and control trouble shooting as required.

Requirement:

• Min diploma in Mechanical / Electronics /Electrical / Mechatronic
• Min 3 years of experience and at least 6/10 in providing maintenance of rotary filling machinery, liquid processing equipment and powder filling machine, fabrication machine, welding machine with minimum to no help from senior
• Min 3 years of experience n at least 6/10 of trouble shooting electrical and control equipment like motors, VFDs, PLCs, electrical panels, relays, contactors, Level, temperature, pressure, weight, flow, proximity sensors and switches with minimum to no help from senior
• Min level 5/10 of skill set in mechanical/ electrical/ technical knowledge of equipment/parts (e.g., Bearings, industrial lubricants& Greasing, conveyors)
• Min level 4/10 of electrical knowledge in processing equipment
• Basic knowledge for Utility equipment functionality and able to work together with with any maintenance activity or troubleshooting.

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

• Conduct regular fuel farm operations and maintenance tasks following SOPs and safety guidelines.
• Preparation the daily logs and supervise the troubleshooting processes carried out by contractors, and reports all equipment abnormalities to the maintenance teams.

Requirements:

• NITEC and above
• At least 2 years of experience in Aviation industry.
• Possess valid class 4/5 and forklift license
• Proficient in utilizing applications with a strong awareness of cybersecurity.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996