About our group:

We are a dynamic equipment maintenance team providing technical support and services to Media Process and Production. We worked in a world’s largest state-of-the art magnetic media manufacturing environment with highly automated processes and advanced control systems.

We pride ourselves on delivering committed equipment performance and operational objectives through effective maintenance, technology, and innovation to help Seagate succeed. Our team is made up of committed, talented, and friendly people passionate about our job, believing in people well-being and people development.

New employee will have positive experiences with our comprehensive induction and training programs with buddy system.

About the role - you will:

• Perform equipment troubleshooting, product conversions and routine preventive maintenance to attain overall equipment performance
• Work with engineering on equipment setup and equipment upgrades
• Perform root cause analysis to reduce product defects
• Initiate ideas on equipment OEE and productivity improvement, safety hazards and cost saving reduction projects
• Be trained to utilize data analytics and machine learning applications for tool troubleshooting and your feedback will be sought after for further improvements
• Have the opportunities for continual learning and growth

About you:

• Diploma in Mechanical, Electrical, Mechatronic Engineering, or related Engineering Diploma or ITE
• Self-motivated and positive working attitude
• Team player with good problem-solving skill
• Willing to work in a clean room environment
• Willing to work on 12 hours night shift pattern

Your experience includes:

• Fresh graduates are welcome
• Relevant experience will be an advantage

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

Are you a passionate animal lover

Job Description

Duties & Responsibilities:

General repair and maintenance of Electrical, Plumbing, Sanitary systems, Air-conditioning, Ventilation system, Mechanical Equipment and Fire protection system etc

Perform preventive maintenance work & carry out duty on modification and installation of M&E equipment and appliances

Attend to guests’ and tenants complaints

Requirements:

Candidate must possess at least NTC 3 / NITEC in Electrical/ Mechanical Engineering/ Building Services or equivalent

1 year of relevant experience in hospitality preferred

Entry level ITE candidates are welcome to apply as we will offer training

Able to commit to shifts, weekends and public holidays

Benefits: Staff duty meal and uniform are provided.

Overview: -

• 5 Days (Monday to Friday), 8:00 a.m. to 5:00 p.m.
• Monthly Base Salary: Up to $3200 (Depending on working experience)
• Transportation Allowance + AWS (13th Month) + Variable Bonuses

Your Responsibilities: -

• Carry out servicing of elevators, escalators and mechanical-parking systems that includes checking, oiling, greasing, mechanical adjustment, trouble-shooting, testing of safety devices, inspection and parts recommendation and replacement, in accordance to local code of practice.
• Attend to breakdown maintenance calls at various job sites.

You will need: -

• Minimum 1 year of relevant technical experience in lift industry
• Comfortable to travel islandwide as per the site requirement

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

An exciting opportunity has arrived at The Garcha Group, Singapore’s boutique hotel group currently with the following hotels:

- Maxwell Reserve, Autograph Collection Hotel (Marriott);

- Duxton Reserve, Autograph Collection Hotel (Marriott);

- The Vagabond Club, a Tribute Portfolio Hotel (Marriott);

- The Serangoon Club, a Tribute Portfolio Hotel (Marriott).

Garcha Group Benefits:

- As an associate of a Marriott hotel, you, your parents or parents-in-laws, children, spouse/domestic partner and

siblings are eligible for discounts on F&B and room rates in 7,000+ hotels world-wide.

- As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalized learning experiences designed to help you thrive in their Marriott career journey.

- Comprehensive Health Insurance Plan.

- 3 days 2 nights yearly staycation including all meals and beverage in any of the 4 Garcha Group hotels in

Singapore.

- 20% off Food & Beverage at all Marriott & Garcha Group restaurants and bars.

Job Description:

· Respond and attend to guest repair requests.

· Communicate with guests/customers to resolve maintenance issues.

· Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication.

· Visually inspect tools, equipment, or machines.

· Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings.

· Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.

· Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, energy conservation, and/or general building.

· Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough clean-up of the painting or repair area.

· Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.

· Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work.

· Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.

· Display basic computer skills including inputting air handler schedules and making temperature changes.

Job Description

What’s on Offer

• Mission: Provide compassion, excellent and holistic healthcare. Tagline:- Serve all with Love.
• Company: Guided by Catholic moral values, as a missionary not-for-profit hospital, we reach out and serve all our patients and visitors with love, continue to make private healthcare accessible to our community by providing reasonable price points and bill transparency. We continue to be progressive to better serve current and future generations.
• Values: Compassion, Humility, Integrity, Respect and Peace (CHIRP).
• Sustainability: Love for nature and the environment. For instance, BYO food containers at staff canteen.
• Work-Life balance: Attractive leave days to rest and re-charge.
• Work Satisfaction: An impactful role in shaping a high performing & engaging culture.

Who We Need

The Pharmacy Technician will assist the pharmacist in preparing and dispensing medications to patients, inventory management and other Pharmacy related activities.

How to Succeed

• Certificate in Pharmacy Technician Course (Pharmaceutical Society of Singapore) or Diploma in Pharmaceutical Sciences or equivalent and above in related field, clinical track is highly preferred for Pharmacy Technician position.
• Preferably at least 2 years of working experience in an acute hospital setting.
• A good team player with strong sense of initiative and commitment in building a culture of performance and engagement.
• Able to work on shifts, weekends and public holidays. Flexible work arrangement can be explored.
• Night shifts are for coverage of duties and off day will be scheduled after night duty.
• Entry level candidates are welcome to apply.

Responsibilities

•Assisting engineering teams in setting up the test equipment for engineering and production.

•Manage all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

•Perform Test program correlations and reject verifications.

•Prepare Test hardware for remote testing, ability to load and do sanity check on test program.

•Ability to work in Bench characterization area, which uses Labview and RF equipment like Spectrum analyser, network analyser etc.

•Carry out characterization or sample screening based on internal team request.

Requirements

• Freshers in Diploma in Electronic / Electrical /Mechatronic/IT/Biochemical/Mechanical/computer/Architecture Engineering

Freshers in Higher Nitec/Nitec in Electronics/Electrical Mechatronic/IT/Biochemical/Mechanical/computer/Architecture

•Able to work rotating 12hrs shift

•Ability to use Microsoft Words, Excel and PowerPoint

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Project Technician
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $2,500 + Transportation Allowance + AWS + VB (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Monitor project activities
• Report to Section manager/Department Manager
• Maintain and control project site and safety
• Verify project deliverables with site documents
• Report to Section Manager on site/safety deviations or issues on projects
• Attend/Conduct toolbox meeting
• Report and assist Section manager/Engineer in project deliverables
• Participate in department EHS activities
• Assist maintenance activities
• Prepare Purchase Requisition and update the cost summary as required
• Maintain project document filling and organize documents

APPLY NOW!!!

• Minimum Diploma or equivalent with at least 1 year of experience or knowledge in the Project Site of the chemical industry
• Proficient in Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65965 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Our client is an established company specialising in Biomedical and Manufacturing. They are expanding and growing at a fast pace and now looking to hire a Chemical Process Technician to support the growth. They are located in the West – easily accessible.

Duties of Chemical Process Technician:

• Verification of necessary raw materials for the blending process.
• Ensuring cleanliness of tanks and the surrounding area.
• Collaboration with the team to execute inline cleaning in place and steam in place.
• Documentation for Raw Material Receipt (RMR), including bubble point tests and chemical weighing.
• Overseeing the regeneration of the RO water system.

Requirements:

• Minimum Diploma/Nitec in Chemical or Engineering related discipline
• Comfortable to perform rotating shifts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Conduct regular fuel farm operations and maintenance tasks following SOPs and safety guidelines.
• Preparation the daily logs and supervise the troubleshooting processes carried out by contractors, and reports all equipment abnormalities to the maintenance teams.

Requirements:

• NITEC and above
• At least 2 years of experience in Aviation industry.
• Possess valid class 4/5 and forklift license
• Proficient in utilizing applications with a strong awareness of cybersecurity.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Key Job responsibilities

- Performs machine & process setup

- Perform Troubleshooting and maintenance of wire bonder and die attach machines

- Maintain a good machine Uptime

- Ensure the quality product is manufactured on schedule within the customer’s requirement

- Work with Cross functional Departments to resolve safety, quality and productivity related issue and improvement.

- Manage the logistic for parts so as to sustain production line.

- Support any ad-hoc duties.

Required Experience :

- Processed basic technical knowledge in machine repair and troubleshooting.

- Minimum 2 year experience in mass production / engineering environment

- Preferably with 2 year hand on experience in repair and troubleshooting of following machines :

Esec Die Attach/wire bonder

ASM Die Attach/wire bonder

DISCO Wafer Saw

Qualification

- Diploma / Nitec/ ITE in mechanical / Electrical / Electronic Engineering

ACCOUNTS & ADMIN EXECUTIVE

Preferable 3 to 4 years experience.

Able to speak English. Other language will be plus point.

Able to handle full set of Accounts.

Require to handle administrative work also.

Require to work independently.

Able to liaise with Auditors Interested please.

Interested candidate please send expected Salary & CV to: [email protected]

Building work

· Must be able to read technical/architectural drawings and diagrams

· Diagnose building problems and come up with solutions to repair them

· Wet work - replace tile, patching work, repair seepages

· Carpentry work - repair, rehung door. repair/replace lockset, Replace door/window accessories

· Installation of partition/ceiling, repainting.

· Floor finishes – carpet, vinyl and timber work.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

Plumbing & sanitary work

· Repair leakage

· Replace sanitary parts

· Perform maintenance and provide customer support

· Part ordering for repairs as needed

· Write up reports on completed services

Job Requirements:

· Minimum 2 years and above in Facilities Management environment

· Possess at least ITE / NTC certification in Mechanical / Air-Con / Electrical / Facility Management

· Honest and committed individual

· Able to commit within a short notice

Acting as the steward of the facility

Serving as the backbone of the facility, you’ll sit at the bottom of a wide range of responsibilities, from managing contracts to keeping the day-to-day operations—including facilities and equipment, M&E matters, housekeeping, conference rooms—in tip-top shape. This is why a strong grip with the service structure will come in handy especially when dealing with issues related to operating expenditures.

Part of your usual concerns include the maintenance all records related to the performance of facility management operations on the site. You’ll also find yourself developing MIS reports for our management team. And when the operations manager is not present, you’ll be expected to lead the monthly progress meeting.

Besides these, you will train team members on all quality policies and procedures. Every now and then, you’ll also be involved in reviewing the performance of our staff and conducting performance appraisals.

Bringing maximum value through excellent service delivery

Beyond daily maintenance, your ultimate focus is to provide professional, value-focused service that helps us meet—and go beyond—the client’s expectations.

Lending your business acumen, you’ll advise the client on future maintenance budgets, so you’ll need to be in tuned with the organization’s ins and outs, goals and overall direction. Your expertise in the world of contracts would be incredibly useful, as you’ll also get your hands on defining terms and conditions, operational scope and documents for annual maintenance contracts. Along with this, you’ll run successful tendering exercises that will help you find the right subcontractors. You’ll also carry out comparative analysis and make recommendations to the client on the most appropriate subcontractors.

Plus, it’s your job to develop service level agreements (SLAs) and assist our procurement experts in closing these agreements with vendors. While in the process, you’ll consider: Is the team deployed by the vendor made up of the right resources—in terms of level and scale—to deliver quality services?

Playing the role of a strategic operator, you will also craft annual cost-saving goals in energy usage and maintenance operations. Coordinating with specialist professionals to ensure compliance with minimum wage acts for payments and regulations falls into your hands as well.

Managing working relationships—the right way
Your ability to deal with clients, vendors and onsite personnel carries a huge impact on your success as facility manager. Among the things that you need to stay on top of are whether subcontractors are meeting their commitments on the scheduled delivery of trainings or they have a planned, structured and solution-based approach to maintenance services. Also, you will audit subcontractors on the quality of materials and upkeep of the site.

You’ll will coordinate with the HR department and the Operations Manager and make recommendations for future trainings to be given to the site facility management team. You’ll prepare and review the preventive maintenance register on a monthly basis and update the operations manager. You’ll also liaise with our Finance team and that of the client’s for client billing and invoicing. You will also be in touch with the client representatives for the payments.

Sound like you? To apply you need to be:

A facility management pro

In order to qualify for this role, you need to have a college degree. Under your belt, you should also have 5-8 years of experience in facilities management. We’re also looking for someone with tertiary qualifications in building management and/or business.

A balanced leader and follower

Are you equipped to set up a team to success? Can you also play to your strengths and work effectively as a team member? If yes, that’s great—the ability to bring about positive changes and follow through with them will be beneficial for this role.

Job Description

• Perform general servicing, maintenance & troubleshooting of air-conditioning systems and provide solutions to fix the issue

• Perform chemical wash/chemical overhaul of air-conditioning systems

• Installation / Replacement of air-conditioning systems (eg. FCU, Cassette type)

• Perform testing and commissioning of air conditioning systems

• Supervise and ensure all works are carried out safely with safety procedures

• Attend to technical complaints and questions from customers

• Able to prepare service report accurately and independently

• Any adhoc duties as assigned by supervisor

• Complying with service standards, work instructions and customers' requirements

Requirements

• Minimum 4 years of experience is required

• Hands-on experience in installation, maintenance (including chemical washing), troubleshooting and repairing of air conditioners

• Must be able to handle physical work due to job nature.

• Basic command of English, spoken and written.

• Singapore Class 3 driving license will be an added advantage

• 6 days’ work week (Monday to Saturday 8.30am to 5.30pm)

• Able start work immediately

Duties and Responsibilities:

• Assist for the end to end outlet renovation projects and its maintenance duties.
• Project duties including but not limited to on outlet design, site coordination, source for quotations, develop a schedule for project completions, involve in licensing applications, liaise and coordinate with internal stakeholders and external stakeholders such as contractors/ vendors/workers, mall management and suppliers.
• Design outlet layout and floor planning using 3D Max and Autocad.
• Monitor the schedule regularly and ensure completion of projects in time.
• Support the team for existing projects.
• Handle regular maintenance, ad-hoc repair, and renewal of outlet equipment (E.g. fire extinguisher, air-conditioning) promptly, to ensure smooth operations.
• Liaise and coordinate with operations employees and external contractors/vendors for repair and maintenance works.
• Attend to urgent ad-hoc facilities matters as and when required
• Develop and update renovation projects reports, repair and maintenance costing reports.
• Handle administrative duties that is related to project team and maintenance work (eg, assets management, claim invoice through internal ERP system, filing and etc).
• Assist in any other ad-hoc duties as assigned.

Requirements:

• Candidates must possess at least a Diploma in Interior Design / Architecture or relevant field.
• Proficient in 3D Max and Auto Cad.
• Experience in renovation works and project management would have an added advantage.
• Highly motivated and able to work independently, resourceful.
• Cooperative and helpful with other team members.
• A good team player with good inter-personal and communication skill.
• Able to handle various projects simultaneously.
• Graduate with design proficiency are welcome to apply.
• Able to commence immediately or within short notice will be added advantage.
• We regret that only shortlisted candidates will be notified.

Japan Medical Devices Manufacturing Company located at ANG MO KIO is currently recruiting Lab Junior Tecnician

Job Descriptions:

· Perform inspection data entry.

· Maintain filling system and provide clerical support.

· Write simple testing quality records and maintenance checklists.

· Ensure proper storage and maintenance of equipment.

· Perform microbiological tests and chemical analysis pertaining to product release, project and validation related testing.

· Perform internal equipment calibration.

· Appointed as a trainer on identified subject matter expert. Train new Lab staffs.

· Consolidate product release documents.

· Generate certificate of analysis for product release.

· Tagging of Product Status in Computer System.

· Conduct lab equipment internal calibration.

· Preparation of BI for routine sterilization and validation.

· Perform QR scanning and maintain QR and inventory storage area.

· Scrap QR and tested samples.

· Ensure and verify chemical mixing process is performed in accordance with written procedures.

· Perform related duties and Descriptions as per required by superior.

Job requirements:

· Minimum O' level (Studied in Science) or equivalence.

· Fresh graduated candidate are welcome.

· 5 days work week, Day shifts.

Basic Range: $1660 - $1800, Attendance allowance:$30/mth.

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

• Support the engineering and manufacturing teams in developing, testing, and producing fire suppression products.
• Participate in the assembly, installation, and maintenance of mechanical components.
• Conduct quality control checks on components and finished products.
• Troubleshoot and repair mechanical systems.
• Maintain documentation related to product specifications, testing, and maintenance.
• Collaborate with engineering and manufacturing teams to identify areas for improvement in product design and production processes.
• Follow safety protocols and maintain a clean and organized work environment.

Requirements:

• Diploma or Degree in Mechanical Engineering, Manufacturing, or a related field.
• Hands-on experience with mechanical systems and tools.
• Strong problem-solving and analytical skills.
• Ability to read and interpret technical drawings and specifications.
• Excellent communication and teamwork skills.
• Familiarity with fire suppression systems is a plus.

Packer/Maintenace Assistant (Macpherson, Mon-Fri, No EXP welcome, Fast shortlisting)

Salary: $1300-$1700
Location: Macpherson
Workdays: Mon - Fri, 10am - 7pm

Responsibility

• Picking, packing and prepare the goods
• Ensure goods is in good condition
• Basic cleaning
• Other duties as assigned

Requirement:

• No Experience welcome
• Able to start work immediately has added advantage.

You may email your resume to [email protected] or whatsapp wa.me/6590066657 for more information.

Regret to inform you that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)
Lee Ming Hui (Reg No. R21102976)

Responsibilities:

· Oversee all building and Mechanical & Electrical (M&E) services, encompassing renovations, construction works, and routine building maintenance.

· Coordinate, supervise, and manage repair, maintenance, and construction activities, involving technicians, vendors, contractors, and consultants in areas such as landscaping, janitorial services, and building works.

· Obtain and review vendor quotes for procuring parts, services, and labour for repairs, maintenance, and projects.

· Conduct comprehensive facilities inspections and generate detailed reports.

· Collaborate with users, project teams, and contractors to effectively plan and implement building/M&E projects, ensuring routine maintenance schedules are adhered to.

· Ensure compliance with preventive maintenance schedules as per service contracts, and conduct routine inspections covering cleaning, security, waste disposal, washroom services, sanitary, plumbing, mechanical and electrical systems, landscaping, and pest control.

· Strategize and manage rectification works, prioritising efficiency and adherence to project timelines.

· Responsible for the smooth operation of assigned buildings, including quick and effective response to emergencies, with minimal disruption to tenants and owners.

· Ensure compliance with safety and statutory requirements, maintaining a secure working environment.

· Lead innovation initiatives by introducing new processes or technologies in collaboration with technology partners.

· Handle ad-hoc tasks as required.

Requirements:

• Possess a Bachelor's Degree in Building Science, Electrical Mechanical Engineering, Facilities Management, or an equivalent field, along with a minimum of 3 years of hands-on experience in Facilities Management.
• Alternatively, hold a Diploma in Building, Mechanical, or Electrical with a minimum of 5 years of pertinent experience.
• Any additional Facilities Management certifications is considered advantageous.
• Able to read & understand Architectural, C&S and M&E drawings.
• Strong people and stakeholder management skills, complemented by exceptional written communication and presentation abilities.
• Good communication skills with a strong command of English & Mandarin

Field Service Technician | Electrical Alternator | Joo Koon

5 days, 9am-6pm

Salary: $3000- $4000 + $205 transport allowance + Transport claimable for site travel

Address: Joo Koon & Site, Overseas travelling required

Company profile:

A world leader in electric motors, electromechanical and electronic drive systems and in industrial alternators.

Job scope:

• Generate basic & detailed electrical engineering design development and electrical instrumentation input to other disciplines.
• Performs maintenance activities on servicing & repair of mechanical & electrical equipment onboard vessels, onsite or in workshop
• On-site investigations in the event of a breakdown to define the root-cause of the failure, takes remedial action & makes reliability improvements
• Monitor the serviceability of equipment & facilities & ensure they adhere to safety, housekeeping & environment requirements
• Digital solution for generator, installation, and commissioning.
• Develop & review risk analysis & procedure
• Liaise with customers on work schedule & defect findings
• Immediate response to any urgent request for on-site, on board, or offshore work.
• The writing of on-site reports, and online assistance for troubleshooting,
• Temporary transfer to the repair workshop in the event of on-site works load drop,
• Compliance with travel rules to minimize costs and ensure the security,
• The support of the Sales teams for their opportunities.

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 5 years of experience in maintenance of electrical rotating machines
• Candidate is required to work on-site or overseas for troubleshooting

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant