• Responsible for the management of facilities related services & operational readiness of SBST’s premises.
• Manage relationships with key stakeholders to ensure operational standards are maintained.
• Manage and guide bus infrastructure officer in providing efficient facilities and project management.
• Manage and execute M&E projects within the organization i.e. Retrofitting of existing premises, fitting out of spaces, implementation of sustainability related initiatives.
• Supervise and guide a team of term contractors on daily facilities management operations.
• Assess, plan and implement operational processes to enhance operational efficiency and effectiveness.
• Liaise with government agencies and statutory boards on regular audits, project management & development and other facilities related issues.
• Oversee the performance of outsourced maintenance team and ensure good maintenance standards rendered in accordance with KPIs set by relevant government agencies and statutory boards.
• Liaise with internal users on all facilities related issues.
• Co-ordination of project works such as upgrading of critical systems & equipment, renovation & retrofitting works, replacement of system infrastructure and improvement initiatives to existing premises.
• Provide technical advisory and support in relation to bus infrastructure issues.
• Good knowledge of government procurement procedures, building & statutory regulations and requirements.
• Ensure prompt service recovery for any breakdown of critical equipment and systems to minimize disruption to primary bus operations.
• Assist in emergency preparedness of activities in support of bus operation requirements.
• Management of technical & service contracts and tender documentations.
• Management of all lease & licence agreements with relevant parties.
• Plan, formulate and manage operating and capital budgets.
• Plan, formulate and execute ISO 55001 Asset Management plans for the organization.
• Compile, collate and analyze operational data and reports for regular operational meetings and updates.
• Put up recommendation and review of proposals for facilities related project works.
• Assist with any additional duties as required.

Requirements:

• Degree in Electrical Engineering with a minimum of 8 years relevant working experience.
• Good communication, interpersonal and organizational skills.
• Strong written and verbal communication skills. Able to conduct professional presentations.
• Sound knowledge of Building and M&E systems.
• SCEM, FSM & GMFM certification will be an added advantage.

(We regret that only shortlisted candidates will be notified.)

Service Technician | Training Provided |Engine Overhaul Industry | Joo Koon

Working location: Benoi Road - Joo Koon

Working day: Monday to Friday, Saturday Half Day

Working time: 08.00am – 5.00pm, Sat: 08.00am – 1.00pm

Salary: $2,500.00 - $2,800.00 depending on experiences

maintain and repair machinery on vessel. You will be responsible for ensuring functionality and reliability of engines and mechanical systems with the instructions from supervisor. They must be able to work with various machines and tools as well as follow all safety precautions.

The main job scopes were as follow.

• Follow repair procedure and instruction from supervisor to carry out overhauling of components and provide customer service
• Performing on Voyage Repair & Services on auxiliary engine on different ship types.
• Perform routine maintenance and general technical work on engine.
• Ensure overhauling of engine/machines meets vessel planned schedule.
• Ensure safety during work assignment.
• Ability to follow established procedures and practices and read instruction manual.
• Maintain & Ensure instrumentation devices with valid certificate and in good operating condition before use. (All lifting equipment and working tools)
• Report problems or concerns to supervisor immediately

Requirements:

• Requires an ITE/Diploma certificate or its equivalent.
• Preferred with relevant experience within the engine overhaul industry, but not mandatory.
• On job training will be provided.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities

• Perform fitting, bonding, dressing riveting and cleaning of aircraft engine component
• Maintain housekeeping of workstations and daily upkeep of equipment
• Perform cleaning, masking, blasting, painting and oven stoving of aircraft parts
• Maintain housekeeping of workstations and daily upkeep of equipment

Requirement

• Relevant Technical certificate
• Good interpersonal skills
• Candidates with welding, paint shop, NDT, Inspection skills will be an added advantage

We are looking for an experienced pest control technician who possesses good communication skills in written and spoken English and is able to work independently and provide pest control solutions.

The Job Scope Consists of the following:-

1. To handle the daily schedule of the technician

2. Handling technician, training and supervision them on the job

3. Must have driving license

4. Must possess a Pest Control Technician License

5. Minium 1 year experience

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About this role

This traineeship is an opportunity for aspiring individuals who are keen to join aviation industry but do not meet the pre-requisites as a trained aircraft engine technician. Upon successful completion of the program, a career as a qualified aircraft engine technician awaits you.

About the Traineeship Program

· The program involves a fully-sponsored training program with an allowance of S$1,700 – S$1,900 per month over the one-year training period.

· The program encompasses initial company familiarisation, classroom training and on-the-job training.

· The initial familiarisation in SAESL provides an insight to the working environment prior to attending classroom training.

· The three-month classroom training, consisting of theory and practical sessions, will be conducted and assessed by an external training academy.

· The nine-month on-the-job training in SAESL provides the opportunity to learn and work on the renowned Rolls-Royce Trent Engines.

· Upon completion of the training, the qualified aircraft engine technician will serve a two-year bond with SAESL.

· The starting salary of a shift-rostered technician at SAESL is between S$2,050 and S$2,150. Career progression opportunity is open to promising technicians.

Requirements

Interested applicants must meet the following pre-requisites:

· NITEC / Higher NITEC / Diploma in Engineering (eg. Aeronautical/ Avionics/ Mechanical/ Mechatronics/ Manufacturing/ Electrical/ Precision)

· Completed or exempted from full-time National Service

· Required to work on rotating shift work

· Willing to work in Changi

Responsibilities

· Operation of Facilities equipment

· Perform preventive and corrective maintenance of Facilities system when needed.

· Supervising/execution of maintenance activities as per schedule

· Attend to any interruptions at the manufacturing and other related areas

· Response and troubleshoot operations/equipment issues

· Support all manufacturing and related areas, ensuring smooth operations and uphold environment safety

· Support Projects and Facilities Change Control (FCC) when needed.

· Execute & closure of MMS work orders

· Monitor Environmental parameters through Building Management System (BMS) & Environmental Management System (EMS)

· Monitor System/Equipment performance through Building Management System (BMS) & Environmental Management System (EMS)

· Attend to Out-of-Specification (OOS) scenarios at manufacturing and related areas

Requirements

· NITEC/Higher Nitec/Diploma in Electrical/Mechanical Engineering or related discipline.

· Minimum 2 years of relevant working experience, preferably in manufacturing facilities environment.

· Ability to be on 24-hour standby.

· Must be able to perform rotating 12 hours’ shift support if required.

To apply, please visit to www.gmprecruit.com and search for Job Code: 17855.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793| EA Personnel: Lionel Liew | Registration No: R1330693

Working hours: 11am to 9pm, 6 days work week

Location: ISLANDWIDE - Nearby MRT stations (City Plaza, Hougang, Jurong, Chinatown, Potong Pasir, Yishun & Woodlands)

Benefits:

• Annual performance bonus
• Medical/dental/optical/TCM claims
• Up to 30 days annual leave

Job description:

• Assist in diagnosing faults in mobile devices
• Learn to disassemble, repair, and reassemble mobile devices
• Repair products including front glass and parts replacement as assigned

Requirements:

• Able to converse in basic English and Chinese
• Able to commit retail hours, weekends and PH
• Able to start within short notice period

• Perform specialized and accurate compounding of flavour samples for submission to internal customers within a set time frame
• Support Flavourist and technical team in sensory activities.
• nput data into Creative database.
• Manage the flavour and ingredient library.
• Participate in tasting sessions to become familiar with the flavour collections.
• Ensure that waste materials are disposed safely
• Maintain and track stock level of laboratory supplies such as glass bottles, raw materials etc.
• Operate, maintain, calibrate and sterilize laboratory equipment and work areas
• Ensure raw materials are stored at correct temperature to ensure quality and safety
• Preparation of raw materials and samples for sensory testing and evaluation by Flavourist
• Perform standard laboratory tests according to prescribed procedures and recording of test results
• Maintain and ensure a clean and safe working environment.
• To carry any additional job-related duties, this may be assigned from time to time, when and where necessary.
• Implement and conforms to all established environmental management system.
• Support the implemented environmental management system.

Requirements:

• Good sensory skills
• Good Chemistry
• Good laboratory procedures and methodology

-To repair forklifts, scissorlifts, boomlifts.

-Perform servicing & overhauling of respective equipments' diesel engine.

-Perform preliminary and outgoing checking on equipments functional.

-Attend site rectifying and repairing works when required.

-To perform work in hydraulic system, automative repairing and mechanical work.

-To ensure equipments are in high quality working performance.

-To ensure all safety measures are in compliance with workshop standards and maintain safe working conditions.

-Other duties as instructed by superiors.

Your Key Responsibilities include:

• Assist in any labor tasks assigned
• Able to handle tools and materials
• Conduct basic quality and testing checks
• Attending to job site troubleshooting repairs and maintenance of all company machinery
• Repair, maintain and overhaul equipment components
• Read and comprehend instructions provided by manufacturers
• Maintain a high standard of housekeeping and follow all safety rules and regulations
• Able to work independently with minimal supervision
• Carry out putty works, spray paint on various types of equipment
• Wash and clean equipment going in for spray painting
• Preparation work e.g. pasting newspaper, removing stickers & removing old sponges
• Inspect finishing works after spray painting
• Maintain and housekeep the working area
• Ensure all safety measures are complied with within the workshop and maintain a safe working environment

Qualifications and Job Requirements:

• Physically fit to work in warehouse/factory setting
• Positive attitude and willingness to learn
• Able to work OT when company requires more manpower
• Will be trained to operate machines
• Experienced in handling and repairing forklifts
• Have Class 3 Driving License
• Minimum 2-3 years of working experience in spray painting environment
• Possessing a forklift license will be advantageous
• Able to communicate in English
• Spray painting skill

• Ensure to achieve Company’s targeted yearly turnover.
• Ensures timely kick-off and proper handing-over of newly secured projects.
• Participates in project budget reviews and provide advice when required.
• Liaises with relevant parties to ensure all project disputes/ clarifications are settled.
• Attend site meeting, liaise with clients, subcontractors and suppliers and to ensure proper documentation. Sources, identify and secure new business opportunities for the Company.
• Ensuring all contractual requirements of all projects are fully complied with and responding to all contractual matters involving cost and time implications.
• Preparing tender documents and quantities, providing cost estimates, evaluating tender proposals, conducting project feasibility studies and managing cost information for all projects Assist on any contractual issues with client, subcontractor and consultants.
• Negotiate commercial terms conditions for new and existing contracts
• Involve project budgeting, controlling of cash flow and cost, processing of claims, contract payments and settlement of final accounts as well as maintaining proper documentation
• previous experience with façade would be advantage.
• Candidate must possess at least a Diploma, Professional Degree, Quantity Survey, Civil Engineering or equivalent.
• Able to speak English and Chinese.
• Required skill(s): AutoCad.
• Applicants must be willing to work in Gul Circle. 5.5workweek.

Responsibilities

• Act as the main point of contact for tenants, addressing their inquiries, concerns, and requests promptly.
• Conduct regular communication to ensure tenant satisfaction and maintain positive landlord-tenant relationships.
• Coordinate and oversee routine maintenance, repairs, and inspections of properties to ensure they meet safety and regulatory standards.
• Collaborate with external contractors and service providers for necessary repairs and upgrades.
• Assist in the preparation and management of lease agreements, ensuring compliance with terms and conditions.
• Keep accurate records of lease agreements, renewals, and terminations.
• Conduct regular property inspections to identify maintenance needs, safety issues, and compliance with regulations.
• Prepare detailed inspection reports for management and stakeholders.

Requirements:

• Minimum Diploma in Building / Facilities / Real Estate or equivalent
• At least 1 year of relevant experience
• Candidate with no experience with relevant Diploma are welcome to apply
• Able to start work immediately or within short notice

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

• Operation and maintenance of electrical systems.
• Continuous monitoring of performance to ensure maximum uptime.
• Coordinating projects for the installation of new equipment.
• Troubleshooting system abnormalities and offering technical solutions.
• Oversight of external contractors and vendors while maintaining safety standards.

Requirements:

• Degree in Electrical Engineering or equivalent.
• At least 3 years working experiences.
• Expertise in operating and maintaining Transformers, LV and MV switchboards, UPS, Motors, Frequency Converters, and power distribution systems.
• Familiarity with low-voltage systems, including Fire Protection, CCTV, PA, and network systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Job Description

• Industry/ Organization Type: Manufacturing and Production
• Position Title: Maintenance Technician / Service Technician
• Working Location: Gul Circle
• Working Hours: 5 days (Mon – Fri, 8 am – 5.15 pm), OT on Alt Sat 8 AM - 4:30 PM
• Salary Package: Basic salary + Fixed Allowance $60 + Transport Allowance + Attendance Allowance + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Ensure smooth supply of facility to production section
• Maintain and ensure reliability of machines
• Ensure the equipment is in good operating condition after inspection, service and repair
• Follow according to the maintenance schedule
• Filing of all machine maintenance life history
• Safety of all machines for production and quality
• Calibration of machines
• Other general maintenance works

APPLY NOW!!!

• At least 1 year of relevant work experience
• Good interpersonal & communication skills.
• Physically fit

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65731 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Perform maintenance tasks on facility systems, including cooling/heating, compressed air, vacuum systems, cleanroom, and non-cleanroom ACMV systems and equipment.
• Assist engineers with operational support, troubleshooting, and problem-solving.
• Coordinate and follow up on internal and external activities as needed.

Rquirements:

• NITEC in mechanical/electrical engineering or equivalent.
• Minimum 2 years experience in manufacturing industries.
• Preferably experienced in cleanroom operations and general facilities systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair.  Identifies and corrects errors.
3. Observes all safety standards.  Maintains a secure, safe, clean and healthy work environment.  Attends required health and safety training and follows safety and security policies, procedures and practices.  Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept.  Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly.  Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components.  Enters data on computer terminal, such as progress, work expense and labor details.  May perform computer programming, repair or software 
5. Details finished work.  Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair.  Inspects parts for defects.  Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities 

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information 

Qualifications

Education:

Skills:

Certifications:

Languages:

Years of Experience:

Work Experience:

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. 

Job Descriptions:

Dealing with Automotive Industry, load heavy spare parts and components

Perform repairs, maintenance, overhaul, replace, remove and installation task

Perform lubricant replacing, greasing and flushing for system

Perform wiring replacing, tracking and diagnostic

Machinery usage, include drilling machine

Working at height, climbing up and down of vehicle

Housekeeping, cleaning/clearing of rubbish and washing parts/vehicle

Ad-hoc duties assigned by supervisors

On the Job Training Provided

Job Requirements:

Keen interest in automotive-related work

Able to work well in a team

NITEC or Diploma holders in Engineering (Automotive, Mechanical, Electrical or equivalent) preferred

Working hours:

7.45am-5.30pm/ Mon-Fri

Working hours: 11am to 9pm, 6 days work week

Location: ISLANDWIDE - Nearby MRT stations (City Plaza, Hougang, Jurong, Chinatown, Potong Pasir, Yishun & Woodlands)

Benefits:

• Annual performance bonus
• Medical/dental/optical/TCM claims
• Up to 30 days annual leave

Job description:

• Assist in diagnosing faults in mobile devices
• Learn to disassemble, repair, and reassemble mobile devices
• Repair products including front glass and parts replacement as assigned

Requirements:

• Able to converse in basic English and Chinese
• Able to commit retail hours, weekends and PH
• Able to start within short notice period

Project Samples Dispatch

• To attend day to day project samples submissions by following up and coordinating with R&D Team in ensuring the samples are submitted on time.
• To ensure project samples received from the R&D Team are forwarded to Courier Team on time for invoice, packing and shipping.
• To measure Flash Point for all new creations are measured and maintain data in FISS for SDS arrangement.

Coordination with QC Department and FA Department

• To coordinate with FA Team /QC Team on the publishing of SDS and GHS information for daily project samples dispatch.
• To attend request from QC Department for reference samples.

Support Affiliates Library Request & Stock Replenishment Request

• To attend Affiliates Library Request and Stock Replenishment Request and ensure samples are submitted on time.
• To maintain and manage the Inventory for Library Flavors. Request for compounding when stock level is low.
• To attend ad hoc request from SCM Department.

Laboratory Activities and others

• Generate GHS Label and re packing of Flavors.
• Returning of flavor back to original storage location after re packing.
• Maintain and ensure a clean and safe working environment in Sample Lab
• Clean lab equipment, glassware, and apparatus after use.
• To carry any additional job-related duties, this may be assigned from time to time, when and where necessary.
• Implement and conforms to all established environmental management system.
• Support the implemented environmental management system.
• Comply with all applicable procedures and legal and other requirements.

Requirements:

• Basic laboratory knowledge
• Able to read, speak, write basic English
• Good communication and interpersonal skill
• Good organizing skill
• Good time management
• Basic knowledge of MS office
• At least 1-2 years of working experience

Technical Service Technician
Working location: Ang Mo Kio
Working date and time: 8.30am-6.15am (Mon-Fri)
Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

1. Machine set up, installation and training
2. Lapping and polishing machine operation & RD lab jobs.

Experience & Qualification

- Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering

* Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.

* Training will be provided.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

• Carry out duties and responsibilities in accordance to the Building Control Act as the Qualified Site Supervisor (RTO) on record for the supervision of the works
• Work with the Resident Engineer and his representatives and be responsible for enforcing specification and code
• Assist RE to review and approve design calculations and drawings at site
• Proactive in providing periodic site progress update
• Maintain and control site records as per required
• Ensure appropriate and consistent documentation of inspection and test, to be in conformance with regulations set forth by BCA
• Arrange and witness Factory Acceptance Tests and Site Acceptance Test
• Conducts inspections and certify value of work completed for RE’s recommendation for Contractor’s progress payment to be made
• Liaise with all parties involved in the project

Job Requirements:

• Minimum Diploma in Electrical /Electronic/Instrumentation and Control Engineering or equivalent
• At least 5 years of experience in site supervision works, preferably in Odour/Water/Wastewater Treatment Plant Project
• IT literate and possess good record-keeping skills
• Self-starter, diligent and ability to work in a team

Avionics Technician (Aircraft/ Aviation/ Aerospace/ Maintenance)

12-Months Contract

Location: Seletar

Salary is commensurate with the experience

Our client is an American aerospace manufacturer. They manufacture military rotorcraft as well as commercial helicopters. Our client also involves in wholesale of aircraft equipment and aircraft supplies (including aeronautical equipment).

General Responsibilities:

• Understand and comply with procedures and policies pertaining to EH&S and time recording
• Understand and comply with company Human Resources procedures and policies pertaining to vacation, medical leave, etc.
• Support Rotary Wing Maintenance Manager, Rotary Wing Avionics Aircraft Engineer and facility DOM with any appropriate assigned tasks in a safe, complete and timely manner.
• Provide clear and immediate advisory to appropriate personnel whatever any safety issues are observed or experienced
• Able to carry our modification, servicing, maintenance and repair of Aircraft Electrical, Instrument and Avionics system in accordance with approved maintenance data and engineering drawing.
• Assist Rotary Wing Avionics Aircraft Engineer in carry our operational/functional test, trouble shooting and defect rectification
• Carry our wiring and electrical component replacement, fabrication of wire harness for wiring modification, aircraft battery charging and servicing.
• Assist Rotary Wing Avionics Aircraft Engineer in ensuring that the tools and test equipment used are properly maintained, calibrated, and correct for particular work tasks.

Requirements:

• GCE ‘O’ Levels Completed
• Minimum 5 years’ experience with general, commercial and/or military aircraft.
• Thorough knowledge of electrical systems and components, reading schematics and installation drawings
• CAAS B2 License, FAA A&P, rotary wing maintenance experience.
• Familiar with common avionics tooling.

Lim Pey Chyi (Apple) - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423