• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

Reporting to the Engineering Manager, the Technician plans, organizes, performs engineering and maintenance activities related to the installation, modifications, troubleshooting, repairs, calibrations and maintenance of equipment / system to ensure that they are safe, efficiently, reliable and meet GMP/ regulatory / production requirements at production plant.

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

• Provides support to complete work activities timely, efficiently, and satisfactorily.
• Apply Safety requirements in all aspect of day to day work.
• Follow up and continue with the previous shift or day incomplete work.
• Provides simple troubleshooting and diagnostic of equipment failure to determine the root cause and perform immediate corrective actions. Use Root cause analysis method for difficult or complex problem.
• Standby for any emergency repair after office hours / weekends and public holidays.
• Provide regular communication to stakeholders like operations and maintenance teams about equipment status.
• Maintain utility equipment like Chiller, Cooling tower, cold rooms, air compressors efficiently and reliably and to support production activities.
• Knowledge in instruments like temperature, Humidity sensors calibration.
• Maintain facilities in upright condition.
• Provide response to Alarms from utility equipment timely.
• Any other duties as and when assigned by the Supervisor / Manager

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• NTC / ITC / Diploma in Electrical Engineering or Mechanical Engineering or Instrument & Control engineering or its equivalent
• 3 - 5 years of working experience in Utilities and Facilities or electrical/instrumentation field in the Petrochemical or Chemical or Oil & Gas or other related industries
• Simple report writing skills

Preferred qualifications:

• EMA electrician’s license will be an advantage.
• Knowledge of cGMP and good documentation practice will be an advantage.

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Perform testing of petroleum products, refinery intermediate, process and effluent water
• Conduct sampling and testing of gases and LPG streams
• Perform QC/QA work including calibration and maintenance of equipment
• Perform stock-taking and reordering of chemicals and consumables

• Diploma in Science & Technology / Engineering or NITEC in Chemical Process Technology / Chemical & Life Science

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Waterproofing Specialist/ Technician
• Working Location: Ang Mo Kio
• Working Hours: 5.5 Days; Mon – Fri (9am – 6pm), Sat (9am – 1pm)
• Salary Package: Basic Salary + Allowance + OT + AWS
• Duration: Permanent

Key Responsibilities

• Inspect and identify areas that require waterproofing.
• Prepare surfaces for waterproofing by cleaning, sanding, and smoothing.
• Apply waterproofing materials using various techniques such as spraying, rolling, or brushing.
• Install drainage systems and solutions to manage water accumulation.
• Repair cracks, gaps, and other structural defects using caulking, grout, or other sealants to prevent water entry.
• Other ad hoc tasks as assigned.

APPLY NOW!!!

• Minimum 1-2 years of related experience in Waterproofing or a related field.
• Preferably with own transport and driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72404 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

JOB DESCRIPTION

1) Facility Management:

a. Oversee the proper functioning and maintenance of facilities such as the swimming pool, gym, and other common amenities.

b. Ensure all facilities are clean, safe, and in good condition for resident use at all times.

2) Meter Reading:

a. Perform meter readings (e.g., water, electricity) at designated intervals and record the data accurately.

b. Highlight and report any irregular or abnormal readings to the management for further action.

3) Handover and Takeover of Facilities:

a. Manage the handover and takeover of facilities, following the checklist provided to ensure thorough inspections.

b. Verify the condition of facilities and report any discrepancies during the process.

4) Patrols and Inspections:

a. Conduct regular patrols and inspections to identify defects, such as faulty lights, damaged exit signs, or other maintenance issues.

b. Promptly report and coordinate with maintenance teams or contractors for rectification.

5) Lift Padding and Contractor Oversight:

a. Install and remove lift padding when required, ensuring proper protection during contractor activities or resident moves.

b. Supervise contractors to ensure they complete their tasks and restore the area to a clean and tidy state before leaving the premises.

6) Resident and MA Support:

a. Respond to resident inquiries and requests regarding facilities professionally and promptly.

b. Coordinate with vendors and contractors for facility repairs and scheduled maintenance.

7) Compliance and Reporting:

a. Maintain compliance with safety and operational standards for all facilities.

b. Prepare detailed reports on facility conditions, maintenance activities, and any incidents as required by management.

Note: Some Job duties may vary depending on site requirements

REQUIREMENT

Requirements

1. Applicants must be willing to work 6 days per week. (off days wil be based on duty roster)

2. Preferably able to start immediately

3. Ability to handle pressure and multi tasks

4. Good administrative and Computer literacy

5. Positive attitude and excellent communication skills.

6. Work Timing is 10.00 to 22.00

7. Candidate without experience can also apply

Job Description

• Industry/ Organization Type: Trading (Telecommunications)
• Position Title: CCTV Technician / Field Technician
• Working Location: Bukit Merah
• Working Hours: 5.5 days (Mon – Fri, 8.45am – 6.00pm; Sat, 8.45am – 1.15pm)
• Salary Package: Basic up to 3,500 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Assist with support before and after sales for products and solutions, including network systems.
• Coordinate the installation and setup of security systems on site.
• Troubleshoot, maintain, and service security systems at client locations.
• Collaborate with the project team to meet network and technical requirements.
• Actively assist with other tasks and ad-hoc projects as needed.
• Install and troubleshoot network cables efficiently.
• Training will be provided.

APPLY NOW!!!

• ITE or Diploma in relevant disciplines
• Must have a valid local class 3 manual driving license.
• Candidates without experience are welcome to apply. Training will be provided.
• Able to work independently without much supervision.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Assist engineers in carrying out all test-related activities.
• Support and implement various product configuration setups.
• Test, analyze, and troubleshoot product failures, collaborating closely with process and test engineers to improve yield.
• Participate in Kaizen activities.
• Update test tracking records.
• Prepare and revise working instructions.
• Provide training on working instructions to new hires.
• Support the NPI process and production runs.
• Participate in ISO activities, including implementation and maintenance.

Requirements:

• Nitec or higher qualification in engineering, with at least 1-3 years of experience in a testing and debugging environment.
• Strong team player.
• Ability to collaborate effectively with peers, engineers, and superiors.
• Capable of multitasking and working under pressure.
• Willing to perform shift work.
• Good understanding of testing methods and concepts.
• Knowledge of programming and debugging skills.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No. 20C0270

• Assist engineers in conducting all test-related activities for server and rack products in production.
• Support and implement PXE server configuration for products.
• Execute and maintain the server and rack run-in testing process.
• Carry out and oversee the burn-in and power testing processes.
• Test and analyze production product failures, collaborating with engineers for improvements.
• Participate in Kaizen activities for continuous improvement.
• Update and track the test program master list.
• Prepare and update work instructions.
• Provide training on work instructions to production teams.
• Support the NPI (New Product Introduction) process.
• Assist production during mass runs.
• Participate in ISO implementation and maintenance activities.

Requirements for AE/Technician:

1. Diploma in engineering with 1-3 years of experience in server and rack manufacturing.
2. Strong team player.
3. Ability to work effectively with peers, superiors, and occasionally with customers and HQ/factory teams.
4. Knowledge of SAP.
5. Ability to multitask and work under pressure.
6. Willingness to work shifts.
7. Strong understanding of testing methods and concepts (for test roles).
8. Programming and debugging skills (for test roles).

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No. 20C0270

• Assist engineers in conducting all test-related activities for server and rack products in production.
• Support and implement PXE server configuration for products.
• Execute and maintain the server and rack run-in testing process.
• Carry out and oversee the burn-in and power testing processes.
• Test and analyze production product failures, collaborating with engineers for improvements.
• Participate in Kaizen activities for continuous improvement.
• Update and track the test program master list.
• Prepare and update work instructions.
• Provide training on work instructions to production teams.
• Support the NPI (New Product Introduction) process.
• Assist production during mass runs.
• Participate in ISO implementation and maintenance activities.

Requirements for AE/Technician:

1. Diploma in engineering with 1-3 years of experience in server and rack manufacturing.
2. Strong team player.
3. Ability to work effectively with peers, superiors, and occasionally with customers and HQ/factory teams.
4. Knowledge of SAP.
5. Ability to multitask and work under pressure.
6. Willingness to work shifts.
7. Strong understanding of testing methods and concepts (for test roles).
8. Programming and debugging skills (for test roles).

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No. 20C0270

Our Purpose
TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day.

We cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team – one that makes better decisions, drives innovation and delivers better business results.

Opportunity Overview
Teradyne Solutions Engineering Group is seeking a motivated and energetic Field Service Technician to assist with our Engineering Lab.

This individual will support current and future enabling technology and growth projects for the Engineering Lab. The candidate should be curious, eager to learn, and capable of providing timely solutions in a dynamic engineering environment. This position offers a diverse and exciting opportunity across various engineering disciplines.

Essential Functions

• Ensure Automated Test Equipment (ATE) UltraFLEXplus, Eagle Tester, etc is fully operational, accessible, and appropriately configured for the work to be done. This may involve preventive maintenance procedures, as well as upgrading tester instruments
• Manage tester instruments inventory
• Work with Engineering personnel on daily activities in the lab and proactively plan for all resource usage
• Ensure that all instrumentation, equipment, and consumables are fully stocked and available when needed, correctly calibrated, and maintained; advising of any conflicts (and propose resolutions)
• Oversee lab operations & support the EHS(Environmental Health and Safety) inspection of the lab

Other Responsibilities

• Support test engineering data aggregation for new product development
• Work closely with Field Applications Engineer to understand and improve test engineering workflow processes

All About You
We seek individuals who share our passion and determination. Our commitment to customer success drives us to go the extra mile. If you’re ready to join us in this mission, take a closer look at the minimum criteria for the position.

• Diploma in Electrical /Electronic / Mechanical Engineering or related field with 2 years relevant working experience preferred
• Prior experience in field service hardware/software validation and verification in semiconductor tester is an advantage
• Knowledge in programming (C#, C++, Python) will be a plus
• Good written and verbal communication skills in English and your native language
• This position requires full time on-site, in-person lab work

We are only considering candidates local to position location and are unable to provide relocation for this position.

Benefits

Teradyne offers a variety of robust health and well-being benefit programs, including outpatient medical, flexible benefits, life and disability insurance, paid vacation & holidays, tuition assistance programs, and more.

Lab Application Engineer (Equipment Maintenance/ Adhesives/ Chemicals)

12 Months Contract

Location: Commonwealth

Industry: Chemicals / Consumer Goods

Salary: Up to $5,000 depending on experience

Responsibilities:

• Performs / supports completion of Root Cause Analysis and Corrective Action Plan on all product related performance complaints
• Supports internal and external technical requests and projects
• Completes Customer Technical Request Testing and Reports within the database or equivalent
• Writes customer facing reports for the Field Sales/Application Engineering teams, Key Account Managers, Marketing, Product Development and Innovations or project team
• Runs and upkeeps laboratory equipment, leads/supports ongoing standardization, harmonization and administration of laboratory test methods
• Ensures laboratory and application equipment are calibrated and safety checked in compliance with local regulations
• Responsible for directly communicating with the Field Sales/Application Engineering teams, Key Account Managers or project team
• Performs customer lab demonstrations and customer training
• To assist in day-to-day laboratory operations e.g. arrangement for testing, inventory control of laboratory supplies and chemicals, etc
• Maintain and upkeep laboratory records, including documentations for inventories, SDS and safety
• Ensure that all safety guidelines are always followed strictly and maintain good housekeeping
• Any other ad-hoc duties assigned

Requirements:

• Bachelor’s Degree in Chemistry, Material Science, or relevant Engineering/technical discipline
• 1-3 years working experience in the laboratory with knowledge on adhesives and/or handling equipment such as DSC, TGA, TMA, DMA, rheometer
• Proactive team player with the ability to work independently
• Knowledgeable in Power Point, Word, Excel, and Statistical Analysis Software

Lim Pey Chyi (Apple) – [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Our client is Singapore leading player in Real Instate industry. Due to their current expansion plan, they are looking for a Retail Operations Manager, in hopes of expanding their retail operation team. They are located in the Town area – easily accessible.

Duties of Retail Operations Manager:

• Lead and Manage Operations: Direct the team in developing and executing strategies to enhance and maintain asset value across the portfolio.
• Ensure Smooth Operations: Oversee programs to guarantee continuous service for utilities, air conditioning, fire protection, and security. Ensure staff are trained in fire and life safety systems and all maintenance programs are up-to-date.
• Asset Management: Review and implement annual Asset Plans for each property.
• Tenant Management: Handle lease agreements, manage tenant renovations, and maintain strong tenant relationships.

Requirements:

• Degree in relevant field
• Minimum 7 years of retail mall management experience
• Good communication and stakeholder relationship management skills

Interested candidates who wish to apply for the advertised position, please email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• Recruitpedia Pte Ltd
• EA License No: 19C9682
• EA Personnel No: R2198636 (Oh Puey Xin)

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to support the implementation of the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.
• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.
• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.
• Contribute necessary improvements and offer advice about operational procedures.
• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications
• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.
• Work with the Service Department to resolve enquiries, if required.
• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.
• Able to travel in short notice.
• Physically capable and available to work overtime including weekends and public holidays.
• Good verbal communication skill.
• Ensure a safe working environment.
• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.
• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).
• Desirable overtime allowance after probation period.

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

You will be part of a team to champion workforce transformation and reskilling needs of the integrated facilities management/ environmental services industries. You will need to possess a strong business acumen and comfortable in communicating with all levels of stakeholders to understand their manpower challenges and propose the relevant WSG interventions:

• Diagnose gaps and identify opportunities through strategic engagement of key accounts/ partners
• Develop engagement plan, recommend appropriate solutions and track projects progress via a data driven approach
• Develop deep understanding of the industries and be attuned to WSG’s initiatives to support enterprises in their human capital strategies
• Support the team in the development of proof-of-concept project(s) under the Jobs Transformation Map (JTM) and testbed scalability
• Forge effective partnerships/ relationships with strategic stakeholders including sectoral agency, union and trade associations
• Support outreach, marketing and networking events that will increase awareness and adoption of best practices/ WSG initiatives

Requirements

• Good data analytics skills – able to interpret data to provide relevant insights and recommendations
• Awareness of various government initiatives related to manpower/ HR interventions/ training
• Strong written and spoken communication skills
• A good team player, self-motivated with an entrepreneurial spirit
• Relevant work experience in the business development/ account management/ project management role would be advantageous

All applicants will be notified on whether they are shortlisted or not within 4 weeks of the closing date of this job posting.

Responsibilities:

• Experienced Fuji Xerox & Canon Multi-function copier machine technician
• To service copier machines for existing customer
• Monthly preventive maintenance/ Meter reading
• Able to guide customer on how to operate copier machines
• Able to assemble copier machine spare parts
• Knowledge in Networking/ Installation is an advantage

Requirements:

• At least 1year working experience in the related industry
• With Class 2B or 3 Singapore Driving License is a MUST
• Must be willing to do overtime.
• Full-Time position available.
• Salary is negotiable

Job Summary:

Responsible for manufacturing/test the equipment, production output, quality, on-time delivery, process improvement, safety and housekeeping in the manufacturing line to manufacture high quality products for customers with the objective of ensuring smooth business operations within department guidelines, work protocols and corporate policies.

Essential Duties and Responsibilities:

• Perform product functional/system test and leak test, identify errors and conduct rework if required
• Actively involved in the knowledge and capability build up the manufacturing/test team (TTS)
• Document troubleshooting methodology, information, analyzes facts/conditions regarding the reported issue, and create coaching materials/technical materials (TTS)
• Lead and actively participate in manufacturing continuous improvement program (TTS)
• Initiate ideas to improve productivity, quality & safety
• Ensure full and efficient pass down to the next shift
• Report and assist engineers in problem solving and troubleshooting
• Collaborate with engineers in line issues problem solving and troubleshooting (TTS)
• Escalate up for any unresolve problems or abnormalities for resolution
• Train and guide newcomers (Buddy System)
• Highlight any problems or abnormalities in production floor
• Perform housekeeping, adhere to manufacturing discipline and cleanroom protocol
• Support other ad-hoc activities and tasking that assign by the superior

Knowledge, Skills and Abilities:

• Basic computer literacy
• Possess hands-on experience in equipment manufacturing and troubleshooting
• Competent in analytical problem solving and statistical tools
• Ability to work in a systematic manner and can withstand occasional workload & schedule pressure
• Independent, self-driven, and able to work with less supervision

Educational/Certification Requirement:

• NITEC / Higher NITEC/ Professional Certificate or its equivalent
• Diploma in Mechanical/Electrical/Electronics /Mechatronics/Engineering

Experience Requirement:

• Able to comprehend electrical / mechanical drawings
• Willing to commit to the shift pattern and OT if required
• Able to carry heavy loads (up to 20Kg)
• Must be willing to work in the cleanroom environment: wearing jumpsuits, safety helmet and safety shoes
• Must be willing to work shift work
• Responsible, Self-motivated, Committed and Good interpersonal skills

Work Experience:

At least 3 years relevant experience in manufacturing/engineering industry

Workshop Technician role reporting to Operations Manager performs critical Testing, Repair and Troubleshooting of Flight Control Actuations ensuring that final products are safe and meet customer expectations while keeping the repair process as effective and cost-efficient as possible.

Responsibilities include:

· Test, Repair and Troubleshooting Tasks

· Shop Process Control and Monitoring

· Safety Management and Human Factors

· Documentation and Data Input

· Preventive Maintenance of Equipment

· Continuous Improvement Initiatives

Experienced level position with candidates undergoing extensive training and qualifications. Diploma or NITEC in an Aerospace/Aviation science or engineering discipline. Aviation background and experience preferred, aviation regulatory papers a plus.

• Analytical skills – need to be able to spot problems quickly and find the underlying causes so changes can be made
• Critical thinking – once problems are identified, solutions and improvements must be found. This might involve thinking about a process, procedure or problem in a completely new way.
• Attention to detail – as the people responsible for the technical work performed, as well as the people who notice and report on problems, every detail must be noticed and acted upon when necessary
• Numerical skills – statistical analysis and data analysis
• Communications skills – strong written and verbal communication skills are key. Must be able to relay potentially complex ideas to a wide range of audiences – both in personal consultations but also through company SOPs and technical documentation
• Team working skills – working as part of the operations team, and in close coordination with other teams throughout the facility (as well as potential for interaction with suppliers and customers)

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Facilities Technician
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: 5 days, 8.30 am – 5.30 pm (Saturday compulsory, 1 off day on weekday & Sunday)
• Salary Package: Up to $2,000 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Oversee daily facility operations and ensure safe, efficient functioning and maintenance of equipment and systems.
• Perform inspections, assess risks, and inform operations of issues.
• Conduct preventive maintenance for facility systems and equipment.
• Respond to emergencies and participate in 24-hour response activities.
• Handle setup and upgrades of production lines.
• Adhere to HACCP maintenance schedules.
• Organize machinery storage and unused equipment.
• Follow safety, security, and hygiene procedures.
• Complete tasks as directed by the Senior Engineer.

APPLY NOW!!!

• At least NITEC in Mechanical Engineering
• Minimum 2 years of related working experience
• Able to start work immediately or on short notice
• Possess Welding Cert would be an advantage

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68847 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

✅ Mon - Fri
✅ 8.30am - 6pm
✅ Taiseng
✅ UP $4000

Responsibilities:

• Assist with facilities and maintenance activities for company's properties
• Manage all A&A works and M&E/ facility related repair and replacement works
• Ensure proper operations and preventive maintenance of facilitiy related equipment such as HVAC, fire protection system, plumbing, lighting etc
• Work closely with contractors for repair and preventive maintenance
• Assist on security operations to ensure safe and secure environment
• Manage company's property portfolio

Requirements:

• Minimum Diploma or above
• Minimum 2 - 3 years of experience in Facility/ Property Management

You may “Using Apply Now Button” to send in your updated resume.

For more information, please reach us at 9138 5316

Only shortlisted candidates would be notified*

Choek Wei Qi Joel

Registration Number: R1877109

Workstone Pte Ltd

EA License Number:19C9998

Benefits:

• Basic Salary up to $2,700 with yearly increment based on performance.
• Allowance and Attractive bonuses provided.
• 5 days work week include weekends & Public Holiday
• Our company emphasises on good career progression.
• Shift Work timings: (6.30am to 3.30pm), (8am to 5pm), (1.30pm to 10.30pm) – Depending on roster basis

Job Description:

This is a full time role for a Technician (Building Maintenance) located in River Valley Road. Our clients are pioneer companies that played an integral role in the country’s physical and economic transformation.

You will be responsible for performing preventive maintenance, repairs, and troubleshooting for mechanical and electrical systems. You'll conduct routine inspections of fixtures, fittings, cooling towers, and chillers, and supervise contractors during repairs and testing. Addressing fault reports, complaints, breakdowns, and customer service requests promptly is crucial. Additionally, you'll report any irregularities observed during maintenance, complete maintenance logs and schedules accurately and on time, and ensure compliance with building and fire safety regulations.

Qualifications:

• Minimum 2-3 years of relevant experience in building or facilities maintenance
• NITEC in Building Services, Electrical, Mechanical, Facility Technology or equivalent
• Good working knowledge in building, mechanical & electrical systems
• Able to work on rotating shift, public holidays and weekends

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Ensure operational knowledge is applied and compliant based on approved Standard Operating Procedures.
• Perform sampling of products from process equipment in accordance with SOP.
• Actively monitor process trend and response to alarms observed on control panel DCS Delta V control system and on PLC HMI.
• Provide inputs for investigation – impact assessment and appropriate CAPA
• Responsible for the completeness and accuracy of all records according to GMP standards.
• Perform routine equipment cleaning (manual cleaning, CIP and COP) as per approved instructions and SOP.
• Responsible for maintaining the upkeep of the plant, perform regular housekeeping of all rooms and ensure issues are highlighted timely ensuring that the plant is always in audit ready mode.
• Manage and ensure proper collection, segregation and disposal of chemical waste in accordance to SOP.
• Ensure a safe work environment in accordance with regulatory and global/local EHS policies
• Sound fundamental understanding of process safety, cleaning changeover recipes and unit operations in API manufacturing.
• Effectively communicate with team members on process status throughout the shift and during handover. Communicates all events/issues effectively with Supervisor.
• Assists in execution of commissioning and validation protocols as required.
• Completes all assigned scheduled trainings, OJT, JSA, ILT and Read and Understand procedures
• Ensures processes are running as per planned schedule with minimal delays. Highlights effectively to shift supervisor if delays are expected.
• Responsible for maintaining good Data Integrity standards.
• Ad-hoc duties as assigned by Supervisor.
• Contribute to the promotion of Antaes services on top of assistance provided to client.

Job Requirements:

• NITEC/ Diploma in Chemical Engineering or equivalent technical related degree is required.
• At least 1 years of experience in working in a chemical or GMP manufacturing environment required.
• Working experience with DeltaV and MES Systems
• Able to work comfortably in 12-hour rotating shift (Day/Night).
• Good problem solving, interpersonal and communication skills.

Lift Technician : Job Description & Requirements

• Assemble, install, repair and maintain lifts.

• Attending to breakdowns, troubleshooting equipment faults and carries out preventive / corrective actions and to perform inspection & testing of lifts.

• Physically fit to handle / lift heavy equipment and parts up to 20 kgs.

• Preferably technician with related field experience.

• Safety Supervisor will be advantageous.

• Work at Height Safety Supervisor will be advantageous.

• Class 3 driving license will be advantageous.

• Good interpersonal and communication skills, good organizational and reporting skills, recognizing responsibilities, able to work independently and yet a team player, actively participating with others to accomplish assignments and achieve desired goals.

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Key Responsibilities

• Repair and soldering of PCB boards.
• Handle repair works of electronics / electrical components of equipment
• Handle parts teardown, re-assembly, re-certification and qualification
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

Requirements

• Minimum GCE O Level/NITEC
• Experienced in troubleshooting Electronics / Electrical component
• Soldering experience is advantageous

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified