As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Summary:

• Basic salary up to $4500
• Commission + Variable bonus
• Transport allowances or reimbursement
• 5 days work week @ 8.30 - 5.30pm
• Location: Tai Seng (walkable from MRT station)
• Opportunity to travel overseas
• Sales or engineering experience / background

Key Responsibilities:

• Identify and approach potential clients via cold calling, proposal emails, networking and etc
• Establish and maintain relationships with clients to foster long-term business
• Prepare quotes and proposal tailored to client's needs
• Use knowledge of products and services to recommend solutions
• Coordinate with internal departments to resolve operational issues
• Address customer concerns related to products
• Other ad hoc duties

Key Requirements:

• Min Nitec in Electrical / Electronic engineering or equivalent
• 2 year of sales / engineering experience
• Willing to travel overseas

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

COMPANY

At Peptobiotics we have built a new biotechnology product to replace the billions of dollars of antibiotics currently used in agriculture - enabling a productive, sustainable food system free from disease, and helping prevent the superbug crisis. We use genetically modified microbes to produce novel antimicrobial peptides. Our strain and bioprocess teams work together designing our product around straightforward scale-up and profitable unit economics.

OBJECTIVES

• Operation of bioreactor systems for submerged fermentation, downstream processing and sample analysis.
• Liaise with Chinese contract manufacturers for production at ~80kL scale and assist them in troubleshooting when required.
• Drive process optimisation by overseeing rigorous data collection, recording, and analysis. Use effect size analysis, DoE, etc to accelerate yield improvements and scale up.
• Preparation of SOPs for fermentation and downstream processing.
• Work with other team members to align molecular, bioproduction and veterinary research.
• Training and mentorship of junior team members.

REQUIREMENTS

ATTRIBUTES

• Experience with benchtop microbial bioreactor systems.
• Experience with yeast secreted protein production fermentation optimization preferred.
• PhD or Masters with work experience.
• Ideally has some experience or familiarity with downstream processing and analytical methods.
• Ideally has some experience or familiarity with industrial-scale fermentation.
• English and Chinese language working fluency are both required.
• Good communicator that enjoys working with and supporting others.
• Driven and takes initiative.
• Interested in entrepreneurship, biomanufacturing, synthetic biology, sustainability/agriculture,aquaculture, technology commercialisation and science with real world impact.

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring quality control in semiconductor manufacturing processes, managing engineering changes, resolving production issues, and driving continuous improvement.

Key Responsibilities :

• Develop, implement, and maintain quality control measures for semiconductor manufacturing processes.
• Monitor production data to identify trends and initiate corrective actions to improve yield and reliability.
• Review and validate quality systems and specifications for new equipment and processes.
• Ensure smooth integration of new technologies into the production line with a focus on maintaining quality standards.
• Manage quality control for engineering changes in wafer fabrication, including reviewing change requests, conducting risk assessments, and ensuring compliance with quality standards.
• Oversee the quality of incoming masks through inspections and audits.
• Collaborate with mask suppliers to identify quality issues, implement corrective actions, and drive continuous improvement initiatives.
• Lead the response to major abnormal events in the wafer fab, including root cause analysis and corrective actions.
• Manage RMAs and work with customer quality teams to resolve issues and improve customer satisfaction.

Education Qualification & Essential Experiences:

• Education: Bachelor's degree or higher in Electronics, Physics, Materials Science, or other related engineering fields.
• At least 5 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Asst Project Engineer

• To assist the Senior Project Engineer/Project Manager to conduct kick-off, pre-project/project meetings to ensure team members is clear on the objectives, deliverable, Quality, equipment’s Lead-time, Safety and construction requirements.
• Plan and assist the Senior Engineer to monitor the daily progress of activities to achieve on or before schedule, i.e., by comparing the planned vs actual progress status, identify critical activities.
• Preparation of engineering documents, such as inspection form, testing form and progress reports, updating of completion status.
• Together with the project team prepare the statement/work procedures, RA to specify the detailed work step required for the specific task of the job to be done and identify key risk with the associate risk. A risk mitigation strategy is applied with the whole project construction task.
• Calculate and tracking usage of resources, such as materials and tools with report prognosis to the Senior Project Engineer/Project Manager.
• Understand and evaluate the project requirements and project plans particularly, materials, schedule, equipment and labour loading.
• Assist the Senior Engineer/construction superintendent in assigning tasks to work teams.
• To explain the site situation, technical requirements, project specifications, special engineering requirements, coordination procedures, execution approach and activities priorities to the various work teams to seek contributions for further refinement.
• Ensure that various disciplines (including quality and safety personnel) are carrying out each tasks and tests/inspection in accordance with specification and standards as per the contractual requirements.
• Assist in resolving engineering issues at site, coordinating with the respective engineering support units, if necessary report discrepancy (if any) on labour status, equipment, materials etc. to the Senior Project Engineer/Project Manager.
• Preparation of project close-out report for the Senior Project Engineer/Project Manager to review before submission to clients.
• Ensure final acceptance of the project by client in accordance with contractual requirements

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Minimum 5 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Job Responsibilities:

• Responsible for the design, deployment, maintenance, and optimization of database systems, including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response speed and stability.
• Plan and expand database capacity to ensure scalability.
• Create and configure cloud servers, networks, storage, and other infrastructure on AWS to ensure a stable and reliable environment.
• Set up and manage monitoring tools to track AWS environment performance and operational status, proactively identifying and resolving potential issues to enhance system performance and reliability.
• Familiar with various AWS services and features, capable of selecting and configuring appropriate services based on business requirements.

Job Requirements:

• Bachelor's degree or higher in Computer Science, Software Engineering, or related fields.
• Minimum 3 years of database management experience, with familiarity with mainstream database systems such as Oracle, MySQL, and SQL Server.
• Proficient in database installation, configuration, maintenance, performance tuning, and troubleshooting.
• Solid knowledge of cloud computing and networking, with expertise in AWS services and architecture; previous experience managing AWS environments is required.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Assisting in the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Handling digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Assisting in Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Diploma in Computer Science, Electrical, Mechanical, Information Technology or a related field.
• Strong understanding of semiconductor technology is preferable.
• Knowledge of SPC, FDC, CIM, and Full Automation
• Proficient in at least one of the following programming languages: C, C++, C#, Java, or Python.
• Capability of RTD (Real-Time Dispatching) is a plus.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Responsibilities:

• Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.
• Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.
• Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.
• Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.
• Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.
• Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices
• Develop/implement backup recovery plans for critical data stored across various platforms;
• Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

• Bachelor’s degree in Computer Science, Information Systems or related field preferred;
  equivalent work experience may be considered
• Proven track record managing both Windows/Linux server environments
• Experience with virtualization technologies like VMware/Hyper-V is highly desirable
• Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)
• Strong analytical/troubleshooting skills combined with excellent communication abilities
• Ability to document processes/procedures clearly concisely
• Capacity planning expertise allowing for strategic infrastructure scaling based on
  organizational demands

Point of contact with customer

Coordination with sub con and suppliers

Proficient in paper work preparation for each project

Familiar with Safety requirements and regulations

Develop project schedule, track timeline

Good disposition, able to handle stress

Resourceful and creative

Responsive and fast

Speak and write good english

Experience in CCTV, Access Control is advantage

• Bachelor’s degree in civil engineering or related field, accredited by the Institution of Civil Engineers.
• A minimum of 5 years of industry knowledge may be strongly desired.
• Familiarity with design software, such as Autodesk, AutoCAD Civil 3D, and MicroStation.
• Knowledge of map creation software and photo imaging software.
• Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design.
• Excellent time management skills to ensure project deadlines are met.
• Leadership skills to effectively manage a diverse group of professionals working on one project.
• Ability to coordinate more than one project at a time.
• RES or REO is the added advandage.

Job Title: Senior M&E Engineer ( ID6015)
Location: City Hall
Working Hour: Mon-Fri 9am -6pm
Basic Salary: $5000-$6000
Benefits: AL start from 11days, medical & dental treatment

Job Responsibilities:
• Generate M&E coordination shop drawings and resolve issues with consultants and sub-contractors.
• Attend client and consultant meetings, prepare progress reports, and ensure ISO compliance (9000, 14001, OHSAS 18001).
• Collaborate with site engineers, propose risk assessments, and develop cost-effective M&E solutions.
• Assist in tendering with architectural and C&S solutions, and review M&E work schedules for project planning.
• Attend site surveys, evaluate VOs, and assess costs based on POs and tender clarifications.
• Work with Planning and QS departments, prepare M&E presentations for clients, and perform full M&E functions as assigned.

Requirement :
-Strong knowledge of M&E details, working drawings and local construction practices
-Minimum of 10 years of relevant experience

Summary:

• Mechanical engineer with BIM experience
• Basic up to $5000
• Variable bonus on a yearly basis
• Location: Central areas
• 5 days work week
• ACMV & LTA/SMRT experience

Key Responsibilities:

• Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.)
• Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects
• Participate in design coordination meetings with architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution
• Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems
• Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.
• Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases
• Perform other duties assigned by Mechanical Manager

Key Requirements:

• Min 2 years of relevant experience
• BCA cert in BIM
• Must have ACMV & LTA/SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Position : Project Engineer (A&A Construction/Junior Role) - Up to $6,500 + Bonus
• Office Location : East - Aljunied
• Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $6,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 3-5 years of experience with A&A works preferably.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684