Responsibilities

· Field service work on highly complex equipment which involves troubleshooting, diagnostic and repairing at customer wafer fab in local and overseas facility.

· Knowledge of Laser and optics is beneficial.

· Prepare field service reports on work activity and provide customer with supporting functions on re-occurring problems.

· Training and OJT will be provided.

Requirements

· Bachelor’s Degree or Diploma in Mechanical/Mechatronics/Electrical/Electronics Engineering

· Good interpersonal/communication skills in understanding customer needs.

· Shows initiative and can work independently.

· Able to work overtime and travel at short notice when required.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Bruker offers differentiated, high-value life science and diagnostics systems and solutions in preclinical imaging, clinical phenomics research, proteomics and multiomics, spatial and single-cell biology, functional structural and condensate biology, as well as in clinical microbiology and molecular diagnostics.

Please visit www.bruker.com.

Bruker - Innovation with Integrity.

Bruker Singapore is seeking for an IT Service Engineer based in Singapore. He/ She is responsible for providing technical support and assistance to end-users within an organization. They are tasked with troubleshooting and resolving software and hardware issues, as well as configuring and deploying new hardware and software systems. The ideal candidate for this role should possess excellent problem-solving skills, strong communication skills, and the ability to work both independently and as part of a team. This is a two years contract (subject to renewal).

Areas of Responsibilities :

• Operate the day to day IT Service Desk to our employees through emails and online ticketing system.
• Monitors and track incident, service request in IT ticketing system. Responsible for dispatching and escalating ticket to next support level. Continuous monitoring and forward movement of end user issues until they are resolved.
• Manage and operate the installation/delivery of all End User Device including Desktops, Laptops, Monitors, Phones, Printers and Mobile device.
• Responsible for all PC heath status; ensure all computers are properly patched and virus protected.
• Provide assistance to users regardless of their geographical location.
• Performing any other IT related duties including on-demand project.
• Manage telecommunication system and cabling system. Work with external vendor to ensure smooth operations and SLA are met.
• Prepare and participate in disaster recovery and unscheduled shutdown drills
• Prepare report as request by management.
• Willingness to travel up to 30% in Asia Pacific
• Any other ad-hoc tasks assigned

Preferred experiences and qualifications:

• Minimum Diploma level (preferred) in a Computer Science or equivalent
• ITIL foundation certification highly preferred
• Some working knowledge in an IT Support Organization
• Preferably 1-3 years of related working experience
• Experience in handling different level of end users
• Experience in handling user request and communicate expectation
• Candidates with relevant qualifications are encouraged to apply

Technical Skills:

• Working knowledge of Microsoft Server and Active Directory
• Working knowledge of Microsoft Technology in General
• Working knowledge of Windows Operating System
• Excellent administration and reporting

Personal & Organizational Skills:

• Good problem-solving skills.
• Good communication skills, written and verbally across all levels of the business
• High analytical problem solving and troubleshooting skills
• Excellent task management skills
• Customer service focused
• Language: English – fluently, both written and verbal

Bruker is an equal-opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore is recruiting a Research Engineer. The successful candidate will work on experiments and numerical modelling of 3D breaking waves and wave-current interaction. The candidate should have strong knowledge background in terms of waves, currents, turbulence, etc. Experience with experiments and CFD model will be advantageous. Only shortlisted applicants will be notified.

Job Requirements

• Possess at least a Masters degree in Civil Engineering with related research experience.
• Candidates with background in fluid mechanics, coastal and ocean engineering, experimental methods are encouraged to apply.
• Strong written and spoken communications.
• Good in quantitative analysis.
• Strong written and spoken communications.
• Good knowledge of CFD analysis and programming skill is an advantage.
• Open to fixed-term contract.

Responsibilities

1. Classify the received Parts into self-repair/outside-repair/Stage/Scrap/Return and place them on the corresponding racks of each Category, and convert the ePMS Level 1 order into a Level 2 order.
2. Open bidding and repair the Parts to be sent to the manufacturer for repair, and convert the ePMS second-level order into a third-level order and issue a warehouse receipt.
3. Each unit listed on the front of the maintenance will be sent to the Parts for repair, and after completion, the ePMS secondary order will be converted into a closed case and returned to the warehouse
4. FAB Urgent case support : The original factory has no ingredients, or the unit price is very high and the seasoning is urgently needed
5. Track and manage the progress of the repaired items sent by the manufacturer for repair, and control the Parts Repair work for Cycle time; provide USER query
6. Key/Special Component Sourcing (for Parts that are discontinued or unreasonably priced).
7. Parts Sourcing / Replacement Solution for Old Discontinued Machines

Qualifications

1. Possess at least a Bachelor's Degree in Electrical and Electronic Engineering.
2. Minimum 2 years relevant work experience in semiconductor related technology equipment maintenance.
3. Knowledge of Servo control loop will be an advantage.
4. Good communication and interpersonal skills.
5. Able to work independently and able to handle stress effectively.

Please apply here: https://talent.sage.hr/jobs/55729b46-20ca-4792-9df2-360f30fbb5e3

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Research Software Engineers with the following backgrounds and experience:

- Full-stack Software Development

- Distributed Systems

- Hospital Information Systems and Healthcare Applications

- Cybersecurity and Software Security

- High-performance Computing

- Network/System Administration

As a Research Software Engineer, the successful candidate will contribute to these developments by producing software tools, platforms and libraries as vehicles to carry out impactful research, develop engaging and interactive demonstrators and translate early-stage research prototypes into robust and usable applications.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

1. The role of Coordination Engineer shall encompass collaboration and chair meeting with all stakeholders
2. T serve as the primary point of contact for HQ, clients, vendors, and project teams.
3. To facilitate regular communication and meetings to keep all stakeholders informed of project progress.
4. To Identify and address any issues or obstacles that may impact project timelines or deliverables.
5. To assist in collaborate with relevant teams to resolve technical or logistical challenges, if possible.
6. To foster collaboration among HQ, stakeholders, PTO, LTA, and subcontractors.

Qualifications & Work Experience

• Bachelor’s degree in project management/ Electronic & Electrical, with 5 years of relevant experience, or Diploma in Mechanical, Electronic, Electrical Engineering with 10 years related field of experience.
• Excellent organizational and multitasking skills, with track record of managing project.
• Strong interpersonal and communication skills, capable of collaborating effectively with all various stakeholders.
• Ability to work under pressure and meet tight deadlines while maintaining high standards of quality.
• Problem-solving and decision-making.
• Risk assessment and mitigation.
• Attention to detail and quality assurance.
• Customer relationship management.

Job Scope:

Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.

Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.

Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.

Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.

Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.

Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices

Develop/implement backup recovery plans for critical data stored across various platforms;

Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

Degree in Computer Science, Information Systems or related field preferred;

Minimum 5 Years work experience will be considered

Proficient in BIM software and AUTOCAD will be an added advantage

Good interpersonal and communication skills

Proven track record managing both Windows/Linux server environments

Experience with virtualization technologies like VMware/Hyper-V is highly desirable

Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)

Strong analytical/troubleshooting skills combined with excellent communication abilities

Ability to document processes/procedures clearly concisely

Able to handle any adhoc jobs based on our Industry

Engineer (Terminal Operations Maintenance)

As a key member in the Terminal Operations team, you will assist to oversee the maintenance activities of the terminal with specific attention to quality, safety and emergency, compliance with regulatory / insurance / statutory requirements, and other administrative functions, hence, ensures division remains a profit centre for the organisation.

Job Responsibilities:

· Develop and oversee preventive maintenance schedules to ensure fuel storage tanks, pipelines, and associated equipment function optimally.

· Coordinate regular inspections and manage maintenance activities and resources to avoid disruptions in storage operations.

· Ensure the availability of the terminal and equipment is maximised.

· Ensure all maintenance work complies with industry regulations, environmental standards, and safety protocols.

· Conduct risk assessments and implement safety procedures, emergency response plans, and training for team members.

· Coordinate and lead relevant functional stakeholders on diagnostic checks and perform repairs on mechanical, electrical, and control systems associated with storage tanks and fuel distribution.

· Respond swiftly to any issues to minimize downtime and maintain operational efficiency.

· Maintain detailed records of maintenance activities, inspections, and repairs, and prepare reports on facility performance and safety compliance.

· Ensure documentation is current for regulatory audits, inspections, and internal reviews.

· Assist Tank Management leadership in formulating and executing of Tank Management Maintenance Strategy.

· Lead and update the Maintenance Management System of all maintenance master data such as assets master, equipment master, maintenance checklists, maintenance schedules.

· Identify opportunities to improve efficiency and reduce costs, while enhancing the reliability and safety of fuel storage operations.

· Stay updated on industry best practices, new technologies, and regulatory changes to keep maintenance practices current.

· Foster a safety-first culture by providing ongoing training on protocols, equipment usage, and emergency response.

Job Requirements:

All Candidates

• Fresh graduates are welcome to apply.
• Degree or Diploma in Mechanical Engineering or equivalent.
• 2 to 3 years of relevant experience is a plus.
• Demonstrates strong management and leadership qualities, with the ability to work independently and think critically.
• Self-motivated, resourceful, and committed to continuous self-improvement, with strong analytical and communication skills.
• Possesses good working knowledge of safety and statutory requirements.
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve maintenance issues under time-sensitive conditions.
• Available to be on standby after office hours in response to any emergency.

Experienced Candidates

• Prior experience in a supervisory or lead role, especially in maintenance, with proven team coordination and communication skills is advantageous.
• Strong technical aptitude in maintaining and repairing fuel storage systems, including tanks, pumps, valves, and piping.
• Ability to interpret technical drawings, schematics, and manuals related to fuel storage systems.
• Competence in conducting risk assessments, identifying potential hazards, and implementing preventive safety measures.
• Experience in Maintenance, Repair, and Overhaul (MRO) activities.
• Familiar with using maintenance management systems such as Maximo and SAP.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

The Role:

We invite experienced C++ Software Engineers to apply as Senior Software Engineers with us. We value proactive problem-solvers with expertise in C++, who take ownership of their work and show dedication to ongoing learning and growth.Candidates who are adept at solving complex issues, especially those related to low latency or multi-threaded, are highly regarded at Rapsodo.

Responsibilities:

This role would be expected to:

• Be open to new concepts and ideas, demonstrate professional curiosity, and driven to succeed with a strong sense of ownership as a problem solver.
• Possess strong organizational skills, attention to detail, resilience, and adaptability in a dynamic environment
• Collaborate closely with Rapsodo's internal teams to ensure seamless integration of middleware solutions.
• Coordinate and execute middleware integration tasks across various technology platforms to support the development and deployment of sports data analytics solutions.
• Engage with a diverse range of applications and technologies, contributing to the dynamic and challenging nature of the role.
• Provide Tier IV and higher support for any outstanding technical issues.

Requirements

• Bachelor’s Degree in Computer Engineering or Computer Science-related discipline
• At least 7 years of work experience in a relevant role, with demonstrated prior experience in leading engineers in delivery end-to-end product development projects
• Demonstrate expertise in modern C++ and multithreading concepts, along with fundamental knowledge of Linux and Python / Bash scripting.
• Strong problem-solving skills with the ability to troubleshoot the most challenging technical issues effectively.
• Demonstrate a self-starting attitude with a strong desire to learn and an action-oriented approach
• Excellent teamwork skills and the ability to work cross-functionally.
• A background in Team Sports will be an added advantage!

• Lead & own the process of preparation of design deliverables with due consideration for applicable codes and standards.
• Interface with Leads of other departments to reflect the as date input from other departments, as applicable
• Take ownership of deliverables producted & their quality
• Capture all changes/modifications in the deliverables that has been intimated by Project, prior to release of deliverable.
• Ensure appropriate checking & review of all documents/drawings before release at any revision status
• Work planning/forecast and effective utilization of manpower,progress monitoring and adherence to scheduled completion of engineering documents.
• control of quality for engineering documents regarding Quality assurance basis
• Keep project manager informed on progress of project, with agreed periodicity & milestones.
• Monitor budget compliance of design deliverable production
• Coordination with the other Engineering disciplines, client, and vendors .
• Perform System level evaluation, analyse faults/failures, and recommend solution.
• Manage and develop the engineering design work
• Appointed as SME for development engineering standards for the department.
• Coordinate with the drafting office on engineering drawings.
• Responsible for the quality of the engineering work and processes.
• Manage, control, and supervise the integration and engineering work for the projects.
• Recommend engineering solutions and alternatives to meet the project schedule, budget and quality.
• Prepare technical and design documentation and reports (Block Diagram, Bill of Material, Functional Design Specification, Termination Drawings, Calculation report, Cable wiring diagram...etc.)
• Develop system, Integration and simulation test requirements, planning acceptance criteria and perform testing
• Conduct product Factory and Site acceptance test with clients.

Job Responsibilities:

• Liaise with the Main contractors, Site Supervisor on the planning and progress of M&E works to meet the project schedule.
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget and accurately documented.
• Undertake ad-hoc duties as assigned to support operational need and project requirements.

Requirements:

• Diploma in Construction Engineering / related field.
• Knowledge in design and building project of M&E works and relevant code of pratice.
• Willing to work on-site.
• 5.5days work a week. (Shift work might be required during critical phase).
• Entry Level are welcome to apply. Training will be provided

Job scope:

1. Assist mechanical and electrical engineers for system assembly, installation, commissioning, and troubleshooting.

2. Carry work assembly and installation according to design requirements, schematics, drawings or working instructions.

3. Undertake ad-hoc responsibilities assigned.

Knowledge, skills and experience:

1. NITEC/Diploma in Mechatronics/Mechanical/Electrical/Electronic engineering

2. Knowledge on mechanical and electrical principles.

3. Able to comprehend electrical and electronic schematics and mechanical drawings.

4. Hands-on experience is a must, e.g. soldering, wiring, M&E assemblies, panel wiring, grinding, drilling.

5. Able to work with minimal supervision.

Expectations:

1. Team player.

2. Attention to details

3. Strong in analytical thinking and problem-solving skills

4. Be responsible and self-disciplined.

5. Assure quality and accuracy of work.

6. Maintain tidiness, cleanliness and safety of co-working workspaces.

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

· Preparation of tender documents & quotation and submission to client.

· Continually seek new opportunities and too increase customer satisfaction and well relationship with client.

· Develop and maintain viable long-term relationships with Clients & Sub-contractor.

· Manage construction activities including planning, coordination, execution and monitoring of installation and construction works on site.

· Maintain good quality standards, carry out site inspections and resolve technical issues on time.

· Provide project estimation cost, analysis reporting for ongoing cost, manage allocation of costs.

· Execute projects with minimal supervision within budget & schedule

· Drive the work force with friendly relationship.

· Responsible for material procurement, subject to the client approved specification and on time requirement to site.

· Conduct project progress reports, client updates and drive internal and clients’ progress meetings.

· Prepare risk assessment and method of statements.

· Solar projects experience is added value.

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Key Responsibilities:

1. Preventive Maintenance (PM):

• Lead and execute preventive maintenance strategies with technician team for all critical production equipment.
• Monitor equipment performance to identify potential issues and implement solutions to reduce downtime.
• Develop and update PM schedules and ensure compliance with maintenance procedures.

2. Troubleshooting and Major Equipment Downtime:

• Provide technical expertise in diagnosing and troubleshooting complex equipment issues during major breakdowns.
• Lead root cause analysis for equipment failures and implement corrective actions to prevent recurrence.
• Support the repair and maintenance team during critical equipment down situations.

3. Equipment Down Reporting:

• Track and report on equipment downtime, analysing data to identify trends and areas for improvement.
• Prepare detailed reports on equipment failures, downtime reasons, and actions taken to minimize future disruptions.

4. Production Planning Support:

• Assist in production planning by coordinating equipment availability and maintenance schedules to minimize impact on production timelines.
• Collaborate with production teams to optimize equipment usage and throughput.

5. New Material Qualification:

• Work closely with the QC team to qualify new materials and ensure they meet required specifications.
• Coordinate testing and evaluation processes for new materials, providing technical input to ensure compatibility with existing equipment.

6. Work Instructions and Process Improvement:

• Develop, review, and update detailed work instructions, standard operating procedures (SOPs), and maintenance manuals for equipment operation and repair.
• Ensure that work instructions are clear, comprehensive, and easy to follow for both operators and technician team.

7. Spare Parts Management:

• Manage spare parts inventory for critical equipment, ensuring optimal stock levels and fast access to required parts.

8. Machine Improvement & Optimization:

• Continuously evaluate production equipment for potential improvements, such as upgrades or modifications
• Lead initiatives to optimize existing equipment, reduce maintenance costs, and improve overall production efficiency.

Qualifications:

• Preferably with Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.
• 2+ years of experience in engineering roles focused on equipment maintenance, troubleshooting, production support, or similar fields.
• Strong knowledge of preventive maintenance techniques, troubleshooting complex equipment issues, and working with various industrial systems and machinery.
• Proven ability to diagnose and resolve mechanical, electrical, and control system issues
• Ability to manage multiple priorities, coordinate cross-functional teams, and ensure timely completion of equipment improvement projects.
• Strong written and verbal communication skills, with experience in preparing reports, work instructions, and technical documentation.
• Full-time, on-site position located at Tampines.
• Occasional travel to other company sites (East region) may be required.

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

• Carry out work in accordance to safety procedures.
• Coordinate site resources.
• Designs and drafts construction drawings according to project specifications.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Inspect installations to ensure it adhere to design and equipment specifications.
• Interacting with contractors and customers using verbal and written communication
• Keep proper record of all works carried out on-site.
• Manage a team on-site to ensure works follow regulatory and project’s requirements.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Track work progress to ensure project specification and schedules are met.

Summary:

Co-ordinate with respective factory teams including CLS Tech Support, CLS Production, HPE Procurement, Material team, HPE Product Engineering team, Test team etc. to ensure all area of focus are well prepared and ready for factory inspection.

Detailed Description:

Performs tasks such as, but not limited to, the following:

• Prepare product sample for agency inspection.
• Perform internal product compliance audits.
• Verify relevant documentation revision and content.
• Prepare and host Factory tour (Incoming Inspection/Production Lines/Finished Products/Lab/Testing areas) with auditor/HPE representative.
• Coordinate product safety factory inspection with relevant engineers (Test/PE/Procurement) and Production to ensure compliance to applicable HPE standards and product regulatory requirements.
• Pursue Supplier CoC availability by purchased batches as “verification of purchased parts” for critical component materials from relevant Proc Engr (e.g. power supply/ PCB/ plastic materials/ batteries/labels) that is requested by the agency auditor.
• Traceability of manufacturer and flame rating for incoming material e.g. plastic material/PCB used in products.
• Keep in touch with relevant Global Product Regulatory team to track and understand the updates to requirements.
• Report any regulatory changes/escalation to management and inform applicable departments.
• Track and maintain the latest version certificates and test reports from the certification body.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards)
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs
• Prepares and collects data from the key points of the processes and prepares the internal quality reports
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators
• Participates in the activities of PFMEA, 8D analysis and elaboration of Control Plan
• Assesses and updates working instructions for specific products

Requirements:

• Bachelor's Degree in relevant fields
• 4 to 6 years relevant experience
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc
• Good understanding and familiarity with safety regulations such as UL, CSA, TUV, CCC and standards (60950-1, 62368-1), China standard GB 4943.1, GB 9254.1, GB 17625.1
• Good understanding in ISO 9001:2015 Quality Management System (Certified ISO Internal Auditor Preferred)
• Attention to Detail: Strong attention to detail is crucial for identifying potential safety issues.
• Team Collaboration: Ability to work effectively with cross-functional teams, including design, manufacturing, and quality assurance.
• Technical Knowledge: Understanding of product design, materials, and manufacturing processes, as well as quality and process improvements techniques and tools.
• Problem-Solving Skills: Strong analytical skills to identify potential safety issues and develop solutions.
• Communication: Excellent verbal and written communication skills for reporting and training, effectively communicate with a wide variety of internal and external customers teamwork skills;

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job Description & Requirements:

• Review of Civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for planning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

Vita Coco, the pioneer in coconut water and the #1 selling coconut water in the US, is a passionate, fun-loving brand in one of beverage’s fastest growing and most profitable segments. Beyond its impressive hydration and functional benefits, Vita Coco has built a real following in popular culture with celebrities, professional athletes, top-selling musicians, and many more. This is where you say SIGN ME UP. But we say, slow down cowboy, read the rest.

In a Nutshell, we’re looking for…

An Operations Engineer with liquid processing experience in the F&B sector, who will be responsible for providing operations support to strategic co-manufacturing partners and who will collaborate closely to implement innovative and continuous improvement initiatives. This role, based out of Singapore, will entail about 50% travel, primarily within the APAC region.

ESSENTIAL FUNCTIONS

Project Management

• Lead projects involving new plant installations and continuous improvement.
• Manage overall project timelines and coordinate with the different stakeholders to ensure on-time delivery of projects
• Work closely with co-manufacturing partners to provide technical support during entire project phase

Operations Support

• Provide Technical Support to ensure Quality, Productivity & Costs are optimized
• Assist in plant trouble shooting and in the resolution of manufacturing related issues
• Work closely with co-manufacturing partners and Corporate HQ in executing new package launches and commercialisation of new products
• Conduct audits of all co-manufacturing facilities to evaluate the manufacturing process and coordinate required follow-up actions
• Work closely with co-manufacturing partners and QA Team to investigate and resolve product quality issues
• Identification of cost savings and optimization opportunities in our co-manufacturing partners, define action plans to execute the actions needed so these are captured.

Innovation and Improvement

• Lead and execute trials with co-manufacturing partners in new process development
• Work together with co-manufacturing partners on product improvements and new product formulations
• Perform technical feasibility and manufacturing audits for potential new manufacturing partners and material suppliers

DESIRED SKILLS AND EXPERIENCE

• 4 years’ experience in the food manufacturing industry, preferably in beverages
• Familiar with factory manufacturing processes and constraints related to low acid food & aseptic beverage production
• Sound technical knowledge and liquid processing equipment, mechanical P&ID design and strong understanding on manufacturing procedures and sequence requirement.
• Exposed to food quality requirements such as HACCP, GMP and ISO Systems
• Excellent oral and written communication skills, interpersonal skills to work effectively in a multi-disciplinary team.
• Willingness to travel around the region (50%).

Vita Coco® is the brand that started America’s craze for fresh coconut water. Informed consumers, pro-athletes and nutritionists as well as in-the-know celebrities and influencers have all become loyal fans of coconut water, swearing by the Vita Coco brand for its delicious flavor, hydrating properties and replenishment benefits. Award-winning Vita Coco, which counts Madonna, Demi Moore and Matthew McConaughey amongst its investors, is one of the most sought-after products in the beverage aisle.

In the U.S. Vita Coco is sold at over 75,000 retailers including Whole Foods Market, Safeway, Target, GNC, Kroger, Publix, Ralph’s, Stop & Shop/Giant, Costco, select Wal-Mart stores and many chain and independent groceries and retailers. It is also sold in dozens of U.S. airports and university campuses, as well as online at Amazon.com.

Vita Coco was founded in 2004 and is based in New York City, with operations in Europe and Asia. Visit vitacoco.com for more details.

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development.

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development.

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/shop drawing if required.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline.

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.