(A) Essential Job Functions:

The QAQC Engineer is responsible for, but not limited to, the following:

Planning and Programming

• Develop testing and commission schedule together with vendors and forward to client/commissioning team for approval.

Quality

• Test all items in inspection and test plan at work site or laboratory to verify conformation to the specified requirements.
• Implement and control tagging procedures at different levels.
• Coordinate with M&E department on M&E installation and T&C.
• Liaise with external laboratory to carry out the testing of materials.
• Organize and conduct handling over punch walks with clients and consultant team.
• Assist Manager in preparing handling over documents and handling over process.
• Ensure all site inspection records, QAQC documents and TC records are up to date.

Safety

• Responsible for the compliance to safety and occupational health practices to be implemented at QAQC section.
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site coordination meeting.

Others

• Assist in all CONQUAS and QM assessment.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• A Degree / Diploma holder with minimum 5 years of experience in concrete technology, inspection, quality control and quality assurance procedures related to the production of high-quality pre-cast reinforced concrete products.
• Prior experience in working in construction site preferred, especially in Civil Projects.

• Manage the daily preparation and production operations.
• Ensure that all activities conform to HAACP standards, and NEA guidelines.
• Responsible for the quality of all food items prepared in the production kitchen is as per company’s standard Operating Procedures (SOP) and according to recipes.
• Produce or directly supervise the cooking of production items that require skill sets.
• Ensure that both the preparation kitchen and production kitchen are staffed adequately for maximum productivity.
• Ensure that all required food ingredients are ordered, stocked, and properly stored.
• Must comply with SFA Food Hygiene standard and Factory cleanliness are always maintained.
• Maintain inventory of production equipment and communicate any concerns or needs.
• Ensure quality control by checking our products during production & delivery.
• Any ad-hoc duties will be assigned as needed.

Job Description & Requirements

1. Prepare and interpret blueprints, schematic drawings, layouts and other visual aids.

2. Coordinate with various Government agencies and utility authorities for initial site clearance and set up site office

3. Report on daily issues to Project Manager / Construction Manager

4. Plan, schedule and monitor work progress at site

5. Continuously ensure adherence to planned timeliness

6. Maintain and monitor quality controls

7. Prepare and submit all daily and weekly reports as required

8. Ensure safe work procedures and environmental control measures are implemented on work site

9. Prepare method statements and other submission

10. Checking drawings and quantities and ensuring that the calculations are accurate for the work

11. Liaising with consultants and/ subcontractors engaged in the project

12. Supervising and monitoring the site labour force and monitoring the work of subcontractors

13. Overseeing quality control and safety matters on site and ensuring that regulations are adhered to

14. Preparing complete, accurate and timely submittal logs for construction projects based on project drawings and specifications.

15. Accountable for receiving approved submittals from and notifying the Project Manager of potential schedule impact.

16. Assist Project Manager by preparing all necessary backups relating to change requests.

17. Distribute contract documents to subcontractors, including drawings, specifications, and general conditions. Include any accepted alternates or addendums with documents.

18. Schedule all required construction meetings with required personnel subcontractors, architects and owners

19. Prepare correspondence with client, architect, engineers, subcontractors, suppliers, etc. Examples of referenced correspondence include, but not confined to the following items: Schedule of values, project schedule, memos, request for information (RFI), transmittals and submittals.

20. During Construction Phase, proactively manage project to achieve quality, schedule, budget and safety.

21. Utilize and maintain tools: schedule and document management to track and record project performance.

22. Planning work to ensure that materials, machineries, authorities’ approval and sites condition are ready before the work starts.

23. Coordinating with authorities, clients to ensure efficient and timely delivery of assignment

Roles & Responsibilities:

• Managing and monitoring all installed systems and infrastructure
• Installing, configuring, testing and maintaining operating systems, application software and system management tools
• Ensuring the highest levels of systems and infrastructure availability
• Maintain workers records upto date.
• Manage network & systems, firewall and storage related issues of the company
• Maintain and provide IT support and troubleshooting for end users on the construction project sites.

Requirements :

• At least a any Master’s Degree or equivalent
• At least 5 years of working experience in the related field
• Knowledge of TCP/IP and Windows system
• Experience in construction industry will be added advantage
• Good understanding and experience of Windows operating system, office365, Sharepoint and Autodesk
• Good interpersonal and communication skills

Responsibilities:

. Reporting to the manager, he’ll perform service activities related to refrigeration chillers.

. Working with chillers to support maintenance, commission, service, install, retrofit, and repair.

. Involve in sales schedule planning & prepare reports for management’s review.

· Maintain the sales service quality and timeliness of answers to customer’s questions & problem.

· Manage assets that are devoted to supporting sales service efforts including facilities, vehicle, equipment, and parts inventory, and this included exercise cost reduction process in accordance with budget control objectives.

· Develop new design, sales & service opportunities and provide sales service support to existing clients.

· Travel to perform sales service locally & overseas and provide support as and when required.

· Coordinate and support contractors.

. Ad-hoc & other duties as assigned.

Requirements:

. Min Diploma in engineering qualification

. Minimum 3 years’ experience in semicon industry

. Proficient in Microsoft office, web design and 2D drawing

. Customer-centric with good oral & written skills

. Hand-on with a can-do attitude

· Strong analytical mind, good problem-solving, independent, goal driven.

We regret that only shortlisted candidates will be notified.

Responsibilities

• Provide L1 Support to the IT Team
• Assist on L2 IT-related matters and work with vendor on issues
• Maintenance of IT peripherals including backup & recovery
• Set-up & installation or migration of IT peripherals
• Relocation of IT peripherals within premises
• Troubleshoot hardware & software issues
• Users profile administration
• Provides IT Support for onboarding and offboarding of staff
• Installation and configuration of software according to customer standard

Requirement

• Minimum ITE / Diploma in IT or equivalent
• At least 1-2 year(s) of working experience in IT field
• User support experience is preferred
• Have Customer Service Skills/ Good Communication Skills/ Team Player/ Take Initiative
• Able to work under pressure and in a fast paced environment

Others

• Working Hours: 9.00am - 05.30pm (Mon to Fri)

Our client is a well established MNC who is a global leader in engraving technologies. Their sales office is located at KAKI BUKIT area (walking distance from Kaki Bukit MRT). They are currently looking for a PRODUCT SUPPORT ENGINEERto join their team.

Basic salary: up to $4000 Basic + Transport Allowance
Work Location: Kaki Bukit (near Kaki Bukit MRT)
Work Days: 5 Days, 8.30am - 5.30pm

Responsibilities:
• To support the sales team with on-site or remote demonstrations, installation / training / reparation of the product scope under service responsibility throughout the entire region.
• Provide online, remote, or on-site demonstrations or testing of the supported solutions and installation/training
• Become a participant in sales team training courses and train sales personnel on-site to improve the effectiveness of their exploration actions
• Collaborate with sales representatives to participate in organizing sales activities to achieve established revenue and profit targets (exhibitions, roadshows, phone and on-site exploration, potential customer follow-up, etc)
• Weekly reports may affect the company's business positioning activities and market development (customer needs, standards, competition, etc)
• Maintain a high level of market, technical, and product knowledge by attending company training courses
• Monitor changes in market application demand

Requirements:
• At least a Diploma in Engineering fields
• 3 to 5 years of commercial experience in selling or supporting industrial equipment (ideally CNC and/or Laser).
• Local & ASEAN travelling required
• Class 3 driving licence and own vehicle not required but transport allowance will be given should candidate possess own vehicle
• Proficient in MS Word, Excel, CRM software and CAD/CAM software
• Good command of verbal and written English

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Current salary & Expected salary
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065 Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Job Description

· Project planning and management.

· Ensure timely completion of projects and execute project tasks within the agreed timescales and budget.

· Responsible for site supervision, safety, resource planning, coordination works and testing & commissioning.

· Plan, coordinate and monitor orders and deliveries.

· Work with sales team to ensure design plan and output meet customers’ requirements.

· Ability to handle combination of projects concurrently at times with respective project technical leads on-site.

· Liaise with customer, vendors, M&E consultants, and project team to ensure quality control, customer satisfaction and projects are completed on time.

· Initiate, implement, and document new processes/ procedures to improve quality, cost, and productivity of the project.

· Liaise with M&E consultants and vendor.

· Adhere to ISO procedures and standards.

· Handle ad hoc assignments or tasks as required.

Requirement

• Bachelor’s degree in project management, business management, or related area of study.
• 5-7 years of experience as a Project Manager or similar position responsible for defining and managing project scope, timelines, profitability, and effective delivery of products or services.
• Experience in managing delivery of customer-facing and internally facing products or services.
• PMI or PMP certification or similar from an accredited organization.
• Intermediate to advanced proficiency with industry-standard word processing, spreadsheet, and presentation software programs.

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Responsibilities:
• Conduct inspection, trouble shoot and complete maintenance of ship’s main engine remote control system and navigation equipment
• Familiar with ship owners and shipyards working procedures and environment
• Willing to work in local and overseas shipyard as well as anchorage environment at irregular hours which include overnight, weekends and public holiday depending on vessel schedule

Requirements:
• Relevant marine / mechanical / engineering qualification
• Sound knowledge in pneumatics / electrical control engineering
• ‘Hands on’ experience in Marine Automation
• Those with minimum experience or education level will be consider for Technician

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Job Description

• Installation, commissioning, maintenance and testing of equipment.
• Compile field service reports after servicing of equipment.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Maintains product database, entering data.
• Maintains professional and technical knowledge.

Job Requirements

• Diploma in Electrical & Electronic Engineering or higher
• Strong interpersonal skill
• Good analyzing information and verbal communication skills
• Class 3 driving license

Additional Notes:

• Opportunities for overseas training and job.
• On the job training and Safety training will be provided.

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Degree in Engineering is required/preferred
• minimum 3 years of Project Management knowledge, skills, experience.
• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

· Checking plans, drawings and quantities for accuracy of calculations:

· Ensuring that all materials used and work performed are as per specifications:

· Liaising with contractors, supervisors, quantity surveyors and the general workforce involved in the project:

· Day-to-day management of the site, including supervising and monitoring the site labour force:

· Planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines.

· Overseeing quality control, health and safety matters on site.

· Preparing VO and other reports as required.

· Other related duties, as assigned

Job Requirements:

- Diploma / Degree , related in Construction
- At least 1 year related working experience in Building Construction

- Bilingual in English and Mandarin in order to communicate and engage with Mandarin speaking customers.

- Willingness to learn & committed to accomplish datelines

(A) Job Summary:

Assists the Construction Manager in overseeing day-to-day site works. This person will need to ensure site safety. Use of cranes at site involves many people from various organisations, such as the crane manufacturer, site occupier, crane contractor, and various sub-contractors that use the cranes.

(B) Essential Job Functions:

The Site Engineer cum Lifting Engineer is responsible, but not limited to, the following:

Site Engineer Roles:

• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Monitor the daily progress of work-on-site, identifying potential delays or issues and implementing necessary
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering any adjustments to keep the project on track.
• Oversee the preparation of monthly progress reports for in-house, owner, and consultant submissions, highlighting key achievements and milestones.
• Produce weekly site progress reports and necessary submissions
• Attend meetings and conduct site inspections on work progress to ensure quality control by authority requirements.
• Maintain safe and clean working environment and ensure compliances according to standard rules and regulations
• Any ad-hoc duties as per assigned by Construction Manager/ General Manager/ Project Director.

Lifting Engineer Roles:

• A person who is required to plan safe systems of work, using lifting equipment.
• Conduct/coordinate lifting operation in the area such as safety rules and regulations, hazardous condition monitoring, and use of safety equipment.
• Investigate crane accidents, near-miss incidents, and occupational injuries to determine causes, install preventive measures, and manage return-to-work activities.
• Coordinate lifting plan programs to determine their adequacy including review of short- and long-term strategic safety planning and development.
• Provide technical advice, coaching, guidance, and mentoring to Lifting Crew’s safety initiatives and necessary changes.
• Identify best practices and lead continuous improvement initiatives to reduce work process risks, raise safety awareness, and improve safe work practices.
• Perform safety audits and inspect LGs, LMs, lifting machinery validity, insurance, and safety equipment to ensure safety rules and regulations are complying.
• Order and maintain lifting work safety inventory including supplies and equipment.
• Any ad-hoc duties assigned by supervisor.

(C) Minimum Qualifications/ Job Experience:

• Minimum 5 years of relevant experience with a Degree in Civil Engineering recognized by the PE Board or qualification / Degree in the relevant field subject to the acceptance of the SO.
• Completed the Appointed Persons - Lifting Operations Course conducted by IES or equivalent course approved by the Engineer.
• Prior experience in working in construction site, especially in Civil Projects.
• Prior experience in working with lifting equipment, especially mobile cranes, and tower cranes etc.

About Innowave Tech Singapore

Innowave Tech is a dynamic and innovative IT company at the forefront of the AI and Industry 4.0 revolution. Focused on providing cutting-edge solutions, we empower businesses to transform through the power of automation, data analytics, and artificial intelligence, to meet the complex needs of our clients in the advanced manufacturing and semiconductor industry. Utilizing deep industrial domain knowledge, proven experience, and innovation, we provide expert AI solutions and systems to address various industry pain points.

Why Join Us

Innowave Tech is committed to provide interns with industrial exposure from tailoring and testing equipment in lab, to deploying on customer site. Interns get to be involved in their projects at customer sites to see how the full solution works in live.

Roles and responsibilities

You will be part of the Automation Team that will create products which will revolutionize the factory floor. You will support our automation projects (Automated Inspection Tools, Industrial IoT (IIoT) implementation, smart devices from assembly to deployment and/or tool development). Throughout this process, you will also be involved in the preparation of key engineering documentation and drafting technical specifications.

• Work with our engineering partners to get customer problems resolved

• Support automated systems' installation, testing and commissioning

• Automate procedure through our proprietary Innowave’s system implementation

• Install, test and configure Innowave’s proprietary automation system software

• Propose changes and improvements to increase efficiency of products and systems

• Give support in evaluating/testing new components/suppliers

Outcome of Technical Skills and Competencies that Intern will learn:

• To be exposed to the industrial application of i4.0 automation solutions, including visiting customer sites whenever applicable

• To apply project management techniques in the management of stakeholders

• To gain knowledge and practical experience in the product development process

• To be able to use problem-solving methodologies when faced with a difficult situation

• To collaborate and work with other stakeholders effectively to meet project goals and deadlines (to be a team player)

Requirements:

• Students currently pursuing in any Engineering disciplines at ITE/polytechnic/local university, preferably Mechatronics, Electrical and Electronic Engineering, Materials Science and Engineering , Mechanical Engineering

• Internship commitment for more than 3 months

• Indicate date range of internship in “DD MMM YYYY to dd mmm yyyy” format

• Basic knowledge of Automation technology

• Soldering and wiring skill is advantageous

• Python or Arduino is a plus

• Able to read Basic EE Circuitry Design.

• Basic 3D drawings in CAD software (e.g. Solidworks) is preferred

• Proficiency in MS Office

• Good verbal and written communication skills

• Willingness to learn and a can-do attitude

Screening questions:

• The intended internship period will be during your course of study?

• Are you students pursuing Engineering disciplines?

• Are you able to commit for more than 3 months?

Key Responsibilities:

• Lead the implementation and configuration of cybersecurity solutions such as Identify Management, Next Generation Firewalls, Anti DDoS, SIEM or Cloud Security.
• Collaborate closely with different stakeholders to design and implement cybersecurity policies, procedures, and workflows based on business requirements.
• Serve as the subject matter expert on the assigned cybersecurity solutions, providing guidance and support to internal team and customer.
• Execute the design, solutioning, deployment, and integration of cybersecurity solutions.
• Conduct troubleshooting and issue resolution related to the Managed Services offered.
• Collaborate with stakeholders to gather requirements and propose solutions that meet business objectives and regulatory compliance.

Qualifications:

• Minimum of at least 3 years in a hands-on or presales role.
• Solid understanding of identity and access management principles, security controls, system and networking.
• Proven Experience with other cybersecurity solutions such as SIEM, Firewall, Anti DDoS protection, Microsoft Security solutions, and other IAM solutions are welcome to apply.
• Excellent communication skills and the ability to effectively collaborate with technical teams, business stakeholders, and external vendors.
• Relevant certifications in CyberArk (e.g., CyberArk Certified Delivery Engineer), Microsoft Security (SC or AZ Track), Netwitness will be advantageous.

Benefit:

• 5 days Work
• Basic Salary : $2000 - $3000
• Good Allowance, Bonus and AWS

Job Scope:

Assistant Engineer

• Perform servicing, maintenance, and troubleshooting on equipment and system the at site
• Ensure the equipment is functionality
• Involve of Installation work for machine
• Partner with other technicians and engineer to perform daily operation
• Respond and attend to fault calls from client
• Ensure Timely check the equipment to ensure they are in workable condition
• Planning and undertaking scheduled maintenance

Requirement

• Possess at least NITEC and relevant field
• 2 years relevant experiences will be advantage
• Entry level welcome to apply, training will be provided

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Benefit:

• 5 days Work
• Basic Salary : $2000 - $3000
• Good Allowance, Bonus and AWS

Job Scope:

Assistant Engineer

• Perform servicing, maintenance, and troubleshooting on equipment and system the at site
• Ensure the equipment is functionality
• Involve of Installation work for machine
• Partner with other technicians and engineer to perform daily operation
• Respond and attend to fault calls from client
• Ensure Timely check the equipment to ensure they are in workable condition
• Planning and undertaking scheduled maintenance

Requirement

• Possess at least NITEC and relevant field
• 2 years relevant experiences will be advantage
• Entry level welcome to apply, training will be provided

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Senior Civil and Structural Design Engineer

Job Description

• To carry out Design of standalone temporary or permanent structures;
• To carry out building structures design including assisting in structural framing plan;
• To carry out Geotechnical design if with the experience or willing to learn geotechnical design;
• To supervise and lead supporting design Engineers to carry out detailed Civil & Structural or Geotechnical Designs.
• To supervise drafting Engineers to carry out drawings production.
• To plan and schedule the various scope of works including design, drawings production, authority submission and construction supports of the projects.
• To works as effective team member in project team, to interact with clients, co-ordinate with the consultants of other disciplines and the contractor.

Job Requirement

• Minimum 4 years’ working experience in Civil & Structural consultants.
• Highly self-motivated and promising career advancements.
• Experience in concrete and steel structures design, and temporary works design.
• Well-versed in local code of practice, authorities regulations for submission.
• Proficiency in engineering software such as STAAD-Pro, PLAXIS, Prokon, ETABs and SAFE etc.

Attraction Points:

- Outstanding career growth & development opportunity

- Competitive salary & work benefit package

- Passionate and friendly work culture

Good package and Good career opportunity will be given to successful candidates.

Qualified or interested candidates, please click to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
• Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883