Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities

1. Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
2. Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
3. Define, coordinate, perform and generate engineering test reports with limited supervision
4. Perform engineering analysis of difficult scope with limited supervision
5. Technically lead and/or executes engineering projects, including development of key suppliers
6. Implements concepts for variety of complex product issues and electrical solutions of difficult scope
7. Generate electrical product specifications
8. Specify and review engineering documentation

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities

Problem identification and troubleshooting a variety of difficult mechanical problems with limited supervision

Define, coordinate, perform, and document engineering test reports with limited supervision

Develop, design, or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of difficult scope

Perform engineering analysis of difficult scope with limited supervision

Technically lead and/or execute engineering projects, including development of key suppliers. Generate mechanical product specifications.

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle. Establishes standards across all operational processes

Specify and review engineering documentation

Implements concepts for variety of complex product issues and mechanical solutions

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Key Responsibilities

Perform engineering analysis under general supervision

Design or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision

Perform and document engineering tests under general supervision

Generate related alpha/gamma documentation for product release under general supervision

Coordinate the procurement and assembly of mechanical components/equipment and identify sources of critical parts and subsystems to resolve moderately complex technical issues

Troubleshoot a variety of mechanical problems of moderate difficultly under general supervision

Implement concepts of moderate product issues and mechanical solutions of moderate difficulty

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.

Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Key Roles and Responsibilities

• Overall in charge of HR Function with full spectrum of services including recruitment and talent management/retention, succession planning, workforce planning and scheduling, training and development, salary and benefits administration and total reward function, support overseas subsidiary setup, build dedication and commitment, discuss issues and conflicts, recognition and incentives system, policy and compliance etc.
• Serve as a HR Business Partner and work closely with HOD to understand business objectives, and whenever deemed necessary, implement jointly with function leader the appropriate HR solutions/framework.
• An active member of the leadership team to lend HR perspective and advice to discussions.
• Work on annual manpower planning and budgeting.
• Provide support to the Senior Management team with organizational changes such as communication of changes, managing ground sentiments, employee talent engagement.
• Drive and lead HR projects such as Annual Performance Appraisal Exercise, bonus pay-out exercise, external audits that involve HR functions and etc.
• Nurture the HR team members through developing and upping their job competencies, with a view to mentoring them to be independent and competent employees.
• Formulates, implements, and reviews HR policies and regulations to meet business objectives, and ensure their relevance in the face of any changing business directives or legislations and statutory requirements.
• Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
• Develop the Learning and Development framework
• Negotiation of Collective Agreement with the Union
• DPO (Data Protection Officer) for the organization.
• Perform other tasks as assigned by the supervisor.

Requirements

• Diploma/Degree ideally in Human Resources Management or equivalent.
• Minimum 8 to 10 years’ experience, with at least 2 to 3 years in a managerial role
• An Independent self-starter to lead, act and execute company directives
• Proficient in Singapore Employment Act
• Familiarity with Policy formulation and implementation
• Analytical and Critical thinking skills
• Problem-solving and decision-making skills
• Proficient in Microsoft Office
• Good listening and communication skills (verbal/written)
• Relation-building skills
• Union management skills

• Plan, execute, and monitor marketing campaigns across various platforms (e.g., digital, social media, traditional).
• Manage campaign budgets, schedules, and resources efficiently.
• Track and analyze campaign performance, adjusting strategies as needed for optimization.

Skills and Competencies:

1. Strategic Thinking:Ability to think critically and develop effective strategies to meet company objectives.
   
2. Digital Marketing Expertise:Proficient in digital marketing tools and techniques, including SEO, SEM, Google Analytics, email marketing, and social media management.
   
3. Data Analysis and Interpretation:Strong analytical skills with the ability to interpret data and adjust strategies accordingly.
   
4. Creativity:Ability to develop creative campaigns and solutions that resonate with target audiences.
   
5. Leadership and Team Management:Proven ability to lead and motivate a team while collaborating across departments.
   
6. Communication Skills:Excellent verbal and written communication skills for internal and external audiences.
   
7. Project Management:Strong organizational skills with the ability to handle multiple projects and deadlines simultaneously.
   
8. Customer Focus:Ability to understand customer needs and deliver effective marketing solutions.
   

Roles and Responsibilities

• Design, maintain and administer the Company's quality training programs.
• Prepare curriculum, training material and recurrent training material to a defined standard.
• Teach formal classroom training courses such as but not limited to policy, procedures, maintenance paperwork, safety, Human Factors, airworthiness regulations, recurrent training and other subjects.
• Revise training curriculum and serve as subject matter expert.
• Design, maintain and administer GE Aviation – Singapore’s Quality System.
• Initiating, updating and maintaining QCWIs and other quality documents as and when required.
• Be in control of the Technical Library. Assure all data are up-to-date and that revisions are distributed to all Engineers affected.
• Facilitate all regulatory and customer audits, work with the appropriate functions in the formulation of corrective actions.
• Support the training and qualification of Certifying Staff.
• Be responsible for the archival of maintenance records. Supervise a team of Technicians in the scanning of maintenance records and ensuring the operability of the scanning equipment.

Required Qualifications

• Degree in Engineering
• 3 or more years of Experience with Quality Systems
• Certified Part 145 or equivilant
• Minimum 2 years of aerospace experience in repair/manufacturing or a quality assurance role.

Desired Characteristics

• Holds a recognized Lead Auditor or Internal Auditor certification.
• Knowledge of Quality Systems/ISO/Aerospace Standards.
• Possess CAAS Air Legislation paper.
• Knowledge of basic engineering and aircraft engine component repair.
• Good auditing experience.
• Good command of written and spoken English.
• Basic knowledge of PC software.
• Good initiative and analytical skills.
• Strong attention to detail and accuracy.
• Ability to communicate at all levels of the organization.
• Demonstrate oral and written communication skills.
• Strong interpersonal and leadership skills.

Job Description:

· Planning and release of work orders for all parts (both components and DMM) based on the customer order/ demand forecast and triggers the subsequent needed materials for piece-parts and sub-assemblies.

· Assure each operation meets shipping dates according to sales forecasts or customer orders for both DMM and components.

· Planning and scheduling workflow for each department and operation according to established manufacturing sequences and lead times.

· Update the status of assigned projects, expedites operations that delay schedules and alters schedules to meet unforeseen conditions.

· Prepare production reports.

· Monitors, analyzes and report performance to schedule of production and production support activities, utilizing information derived from material and production control systems.

· Monitor and expedite the components progress of sub-assembly to meet the delivery schedule and initiate the picking/ staging for assembly.

· Expedite all the subsequent process of material once delivered from the sub-tier to meet the delivery schedule.

· Ensure all parties are fully cognizant of production status, & that work planning and execution objectives are integrated and communicated.

· Coordinates and expedites the placement of purchase orders and / or delivery of material if necessary.

· Resolves problems utilizing acquired knowledge and analytical abilities.

Requirements:

· Min 5 years experience in Manufacturing/Automation/Contract Manufacturing

· Proficient in MS Office, SAP or Epicor

· Able to work independently under pressure and meet tight deadlines

· Good interpersonal skills and require good organizational skills such as clear agenda setting, preparation and planning for meetings and tasks, involves input to the planning exercises and reporting against those plans.

· Able to commence work in short notice

· Bilingual in English and Mandarin

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

1. JOB DESCRIPTION

Job Title

Technician/Engineer (Contract/Perm)

Occupation

Technician/Engineer

Job Description & Requirements

Job Highlights

• Mon - Fri 8.30am to 5.30pm. Training provided
• Transport and Mobile Allowance + OT + Medical reimbursement

Job Description

Responsible for facility hook-up, installation, repair and start-up process of semiconductor equipment.

Responsibilities

• Perform installation work according to guidelines and procedures
• Perform safe and proper move-in according to procedures
• Tally and check the conditions of parts and accessories
• Support engineering activities
• Ensure good EHS compliance

Requirements

• Must possess Min. Certificate / Diploma in Electrical / Mechanical / Electronic Engineering or equivalent
• Preferred bilingual in English and Chinese to handle Chinese speaking customers’ technical enquires & conduct trouble shooting based on customers’ feedback
• Cleanroom environment
• Able to start immediately preferred

Freelance Opportunity: Packing Manufacturing Production Process Staff (Hand Packer)

Are you seeking a flexible freelance role in a supportive work environment? Inkjet Systems Pte Ltd is looking for dedicated individuals to join our manufacturing team as Freelance Hand Packers.

Job Title: Freelance Packing Manufacturing Production Process Staff
Occupation: Hand Packer

Why Join Us?

• MOM-Compliant Standards: Work in a safe and regulated workplace.
• Comfortable Work Environment: Our facility is cool, airy, spacious, well-lit, and well-ventilated, ensuring you have the best setting to work productively.
• Work-Life Balance: Enjoy a five-day work week for flexibility and convenience.

Requirements:

• Reside within a 30-minute bus ride from our facility at:
  56 Loyang Way, Singapore 508775.
• Punctuality, reliability, and attention to detail are essential.

What You’ll Do:

• Assist in packing, sorting, and managing products in our manufacturing process.
• Ensure all packed items meet quality and presentation standards.
• Collaborate with the team to meet production deadlines.

How to Apply:
Ready to be part of a team that values productivity and comfort? Send your application to [email protected] and [email protected], or connect with us at ecosam.sg.

Join Inkjet Systems Pte Ltd and contribute to our innovative production processes while enjoying a flexible freelance role!

Job Description & Requirements:

• Develop detailed manufacturing processes, including assembly procedures, testing protocols, and quality control checks.
• Create efficient process flows to minimize waste and maximize productivity.
• Continuously analyse and improve existing processes to reduce costs, increase yield, and enhance quality.
• Design and procure necessary manufacturing equipment and tooling.
• Determine the required production capacity and allocate resources accordingly.
• Plan and design the manufacturing facility layout for optimal workflow and efficiency.
• Oversee pilot production runs to identify and address potential issues.
• Validate processes to ensure they meet product specifications and quality standards.
• Implement quality control measures to ensure product consistency.
• Drive continuous improvement initiatives to enhance product quality and process efficiency.
• Investigate and resolve quality issues.

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

Key Responsibilities

Continual improvement - Works on continual improvement projects for digital tool space
Communication - Internally Communicates complex information to others.
Troubleshooting - Provides guidance with troubleshooting gaining knowledge on issues and actions. Deployment, configuration, and propagation of DTs
Daily work - Maintains the FSS system, monitors alarms, propagates models, and adjusts model limits. Main point of contract for issue escalation at the site
Mentoring - Works with others on DT usage while gaining insite on tools, signals, and systems.

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline. Have some knowledge of Applied's products and applications.

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Job Scope:

1. Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

1. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them
2. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.
3. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Qualification:

1. Strong knowledge of M&E details, working drawings and local construction practices
2. Conversant with local codes and regulations
3. Is a good team player and is analytical and a problem solver
4. Excellent in communication skills, both verbal and writing skills, with a high level of attention to detail
5. Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
6. Proficient Microsoft Office and other IT software

Make a meaningful difference to patients around the world. At Edwards Lifesciences facilities around the world, our Manufacturing teams create the tools, technologies, and devices that transform patients’ lives. As part of our sewing, assembly, delivery, and distribution teams, your attention to detail and commitment to continuous improvement will help us turn innovative ideas into reality. Your purpose-driven work will help leave lasting and positive impacts on patient lives.

Key Responsibilities:

• Supervise employees and manufacturing activities pertaining to the production of products and/or manufacturing processes in - and with manufacturing/technical knowledge of - 1 or more production areas, depending on the complexity of the areas
• Conduct performance reviews, including resolving performance issues
• Oversee the scheduling of work orders and team performance metrics
• Accountable to ensure staff is appropriately trained to perform assigned work
• Accountable for productivity, quality, and training metrics of staff, and provide regular progress reports and manufacturing metrics to management and cross-functional stakeholders
• Ensure appropriate staffing for all positions
• May participate in improvement projects, partner with engineering on investigations and/or corrective actions, perform non-conformance investigations for review with engineering, assures documentation content is valid
• Other incidental duties

Education and Experience:

• Other: in Diploma, 5 years relevant experience
• with internship or substantial technical knowledge and experience in related manufacturing, and/or quality
• Experience working in multi-cultural teams with cultural sensitivity
• Experience working in a medical device industry Required

Additional Skills:

• Proven expertise in Microsoft Office Suite with working knowledge of Enterprise Resource Planning (ERP) system, preferably JDE
• Excellent communication and interpersonal relationship skills; possessing strong collaboration skills in partnering with cross functional stakeholders in order to achieve objectives
• Full understanding of manufacturing procedures
• Ability to supervise/lead employees in a manufacturing environment
• Ability to analyze and identify potential line/operation layouts adjustments to improve efficiency
• Basic understanding of processes and equipment used in assigned work
• Ability to work and excel within a fast paced, dynamic, and constantly changing work environment
• Ability to lead teams, provide coaching and feedback, including responsibility for all employee actions including hire/fire authority and partnering with HR on all aspects of employee relations
• Knowledge of Lean Manufacturing concepts and Six Sigma
• Must be able to promote and work in an inter-departmental team environment
• Successful completion of ongoing job training of manufacturing process steps
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control
• Able to work Monday to Friday, 3.30pm to 12am. 2-ways transport will be provided.

Key Responsibilities

• Perform tool build, integration, testing and troubleshooting
• Ensure tool remains up for Process and other hardware qualifications.
• Work with Clean Room Facilities group to specify facilities requirements.
• Understand facilities availability and needs of the tool and work with the facilities group to manage & troubleshoot any facilities related issues.
• High level technical knowledge in at least one R&D discipline (Optic, Electronic, Motion, SEM): (1) Support R&D module owner in “Off & On Tool” Module Integration, Calibration and Qualification (2) Qualify Module performance to spec (on & off tool) (3) Support R&D Development (C&F) activities
• Qualification of non-system components (isolated from application)
• Define & execute Qualification plans; Define, execute and qualify calibration procedures (off and on tool).
• Performs all standard service activities through Tier I. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to customer tool issues by communicating with other engineers and participating in escalation conference calls.
• May participate in projects to reduce costs and increase uptime.
• Verifies operational quality of system equipment. Assists senior engineers as needed.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.
• Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Assumes responsibility for complete customer satisfaction within work area.
• Assists in planning, communicating, and coordinating support plans with customer management.
• Manage external customers and support tool issues at customer site
• Complies with all safety procedures and consistently demonstrates safety as a value.

Requirements

• Prior hands-on experiences in Wafer Fabrication Semiconductor tools (CVD, PVD, Etch)
• Relevant education qualification in Engineering
• Ability to work with deadlines and with all levels of internal and external stakeholders including customers
• Ability to work in cleanroom work environment

Work Location

• Science Park II

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Summary

A Senior Geotechnical Engineer position is available with Fugro Marine Geotechnical Team. The Marine Geotechnical service line is responsible for acquiring and interpreting accurate geotechnical data which enables our clients to make informed decisions during the engineering, design and construction phases of infrastructure development projects, ultimately reducing project risk and costs.

Reporting to a Principal Geotechnical Engineer / Engineering Manager, the Senior Geotechnical Engineer will take responsibility for independently delivering the findings of offshore site characterisation projects whilst managing a small engineering team in the future. From time to time you will also lead site based teams which is predominantly on dedicated geotechnical drilling vessels.

This position will be based in the Singapore office and serving all projects in the Asia Pacific Region.

About the Role

• Assisting the Engineering and Reporting Manager and Principal Engineers in the technical direction, resource management, planning, mentoring and training of a team of geotechnical engineers
• Communicate directly with Clients and Fugro’s project management team to ensure requirements are met
• Technically manage a portfolio of various sized projects, ensuring compliance with the specification, and delivery of projects to programme dates and within budget
• Perform offshore stints either as a Lead Geotechnical Engineer or for the purposes of training and mentoring junior staff
• Delegate and distribute project responsibilities to junior staff and oversee their work
• Provide geotechnical consultancy services
• Review and approval of data provided by laboratory and geotechnical engineers

About you

• A degree in Civil Engineering, Engineering Geology, Geotechnical Engineering
• Demonstrable experience within the Geotechnical Engineering profession, with relevant experience within the onshore or marine sector
• Willingness and ability to be part of offshore data acquisition campaigns
• Computer literate, capable of using spreadsheets preferably including macros and SharePoint
• Capable of generating a safe, productive and quality-based culture within the team
• Strong communication skills, both written and verbal
• A good team player and able to form working relationships with clients and colleagues at all levels

What we offer

Competitive salary with Annual Wage Supplement

Generous paid-leave

Career & training opportunities (international opportunities possible)

Company shuttle from various pick-up at MRT stations across Singapore

Collective health insurance and outpatient benefits;

Employee Assistance Programme (EAP) to provide help when you need extra support.

Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘Creating a safe and liveable world together’ – and to each other.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

- Attend to and perform daily support, maintenance and troubleshooting onsite and offsite

• Provide on site support for various systems, network and desktop troubleshooting, to ensure that the service meets the SLA

• To work with product team on any system enhancement or troubleshooting.

Requirements:

• Diploma in IT or relevant discipline.

• Prefer experience in desktop support and good working knowledge in Windows OS, Basic Networking.

• Experience in customer support environment will be advantageous.

• Good technical, analytical and troubleshooting skills, with strong customer-oriented attitude and inter-personal skills,

• Willing to travel to multiple sites

• Willing to work alternate shift hours: 2 days work and 2 days off rotational shift (AM Shift: 8AM to 8PM; PM Shift 8PM to 8AM)

• Perform product assembly, equipment and machine sub-module assembly according to specifications
• Generate require documentation from Bill of Materials (BOM) and assembly drawings
• Running simulations or conducting basic analyses to support design decisions.
• Assisting engineers in creating and updating technical drawings, schematics, and other design documents.
• Support and involvement in PD, NPI and MP phases
• Generate PFMEA, technical reports and perform Failure Analysis (FA) on products
• Hand on electrical hard wiring & components installation
• Conducting research on new technologies, materials, or manufacturing processes that could benefit the project.
• Maintaining organized records of design documents, test results, and other relevant paperwork.
• Liaising with other departments such as manufacturing, quality assurance, and supply chain to ensure smooth collaboration.
• Perform 5S and ad hoc duties as requested

Join the Inkjet Systems Pte Ltd Family!

Are you looking for a stable, rewarding career with a company that values its employees? Inkjet Systems Pte Ltd is the place for you!

Why Work With Us?

At Inkjet Systems Pte Ltd, we believe in rewarding hard work with progressive wages and providing a safe, supportive work environment.

What We Offer:

• Full-Time Employment: Enjoy the security of CPF contributions and paid insurance.
• Compliance Assured: MOM-compliant workplace standards.
• Comfortable Work Environment: Work in a cool, airy, spacious, well-lit, and well-ventilated setting designed for productivity and comfort.
• Work-Life Balance: A five-day work week, so you have time for what matters most.

What We’re Looking For:
We’re seeking motivated team players who meet the following requirements:

• Reside within a 30-minute bus ride from our facility at 56 Loyang Way, Singapore 508775.
• Committed to punctuality, responsibility, and teamwork.

Your Next Step:
Become part of our innovative and forward-thinking team!

Apply Now:
Submit your resume to [email protected] or visit us at ecosam.sg to learn more.

Take the next step in your career with Inkjet Systems Pte Ltd—where your growth is our priority!

As the Senior System Software Engineer, you will be the technical lead for our scientific instrument system software development. You will be working closely with hardware/mechatronics engineers to define and develop low level communication protocol, motion control and device drivers and firmware to support our scientific instrument system design, development, test, and manufacturing. You also work closely with hardware/firmware/software engineers to define and develop the automated system to support our cutting-edge virus identification equipment. This opportunity will allow you to grow and command the system software design and development of one of the most innovative and leading scientific instruments in the industry.

Roles and Responsibilities

• Design and develop system software architecture for Borries instrument system.
• Work very closely with the system hardware engineering team on dissecting system requirements, conducting system analysis, design, and review, to ensure our system design can best meet the requirements in term of functionality, performance and reliability.
• Responsible for defining and documenting the system software requirement, architecture, design, unit test, integration test, and development plan to ensure our system software design and development plan can best meet the requirements.
• Responsible for implementing and testing the system software, tracking its issues until its resolution, to ensure our product can best meet customers’ requirements and delivery timeline.

Qualifications

Bachelor or Master’s degree in Computer Engineering, Computer Science or similar field.

Job Requirements / Special Skill sets

• Solid knowledge and extensive working experience in low level communication protocol, motion control, device drivers and firmware.
• Solid programming skills in C/C++/C#
• Familiar with Python, Linux and Qt would be an advantage.
• Background in image processing/computer vision/machine learning including programming new image processing algorithm and machine learning tools would be an advantage.
• Solid knowledge and extensive working experience in GUI software design would be an advantage.
• Strong analytical and presentation skills, as well as high creativity, flexibility, and ability to think 'out of the box'.
• Strong oral and written communication skills.
• Ability to work with other functional teams, especially in a multi-site environment.
• At least 3 years of experience with system/architecture development on an equipment system.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.