As a Global FE Central Planning Capital Engineer in Micron, you are part of the Global FE team responsible for managing the capital budgeting, funding and savings process.

In this role, you will work closely with Manufacturing Central Team resources, Fab resources, Global Procurement and Finance. You need to have good communication and presentation skills, and able to provide clear and qualitative data analysis to facilitate decision making. You should possess detailed understanding on capital expenditures and able to identify opportunities for capital optimization.

Capital System Project

• Contribute and provide subject matter expert guidance and requirement feedback in Capital Asset Lifecycle Management (CALM) project – to set up the end-to-end CALM system in SAP replacing MICAP for budget and fund.
  
• Communicate status of tasks, report issues, risks, changes, and quality concerns to the project manager and team.
  
• Establish reports to monitor Capital Health.
  
• Discuss and propose metrics and the action plans required.
  

Monthly Capital and Cash Flow Review Process

• Facilitate the monthly capital review process for Micron’s Front End (FE) Operations. Define, sustain, and continually improve the processes to enable the budgeting, funding, savings and GR/cash flow compliance of Micron’s FE Operations.
  
• Provide support and technical expertise to the various stakeholders to deliver an effective capital request to the executive teams for approval.
  
• Collaborate with site planning and other Teams to ensure used assets are considered before the commitment of any new capital expenditures, and identify opportunities for capital optimization.
  
• Balance the need to push for optimized capital plans against the monthly capital cycle deadlines.
  
• Act as a liaison between the sites and other Central groups, to establish and enforce business processes for a sustained and effective capital cycle, and help resolve conflicts as and when required.
  

Executive Capital Review

• Generate Biweekly and Monthly Capital cash flow update to leadership based on MOR, Loading scenarios, Cashflow adjustments and Projects activities.
  
• Validate Micron Capital Ledger and work closely with Finance team and other organizations/team to roll up Board of Directors reporting and Earnings Call data.
  
• Generate Wafer Fab Equipment (WFE) data based on validated Finance cash flow reports for Industrial benchmarking analysis
  

Requirements :

• Masters/Bachelors’ Degree in Engineering.
  
• Strong verbal communication and presentation skills
  
• Ability to work closely and effectively with others in a team environment
  
• Strong data validation skills and reporting skills
  
• Strong ability to perform data analysis and problem solving
  
• Ability to map relevant conclusions to support decisions making
  
• Exceptional customer focus
  
• Knowledge and practical application of statistics, data analysis and problem solving
  
• Independence and high determination to complete tasks in a timely manner
  

As the Global Facilities Regional Engineering Electrical Engineer you will be responsible for providing technical support, expertise, and lead business process alignment on construction project design, management, schedule, cost control, testing & commissioning, operational and maintenance programs for the facility Electrical systems at all manufacturing sites in your location / region.

As a global team member residing in your current site/geography, you will represent all facility design standard alignment, construction project management, O&M BKM alignment initiatives. You will also support the Global Facilities Central Engineering Team, Construction Team , Line Planning Team and O&M Team in providing critical design standard alignment, supplier quality improvement, operational and maintenance input and support construction projects.

Critical metrics include construction project management, schedule, cost control, safety index, and facilities system reliability improvement program in eliminating production events that minimize lost moves and scrap.

Responsibilities and tasks:

• Project
• Design and construction of regional green field project with alignment to global standards and collaboration with central sustainability, cost, construction and line planning team.
• Engineering support for site projects, Alpha to Beta technology transfer and sustainability projects
• Review and approve site capacity expansion and sustainability capex
• Review priority and make business driven decision on Facilities Reliability Improvement project capex
• Reliability
• Engineering support for site system improvement projects (System Reliability Improvements, Quality Improvement and Equipment EOL replacements)
• Oversee regional efforts and identify opportunities to align strategic program (eg BCP, Critical spec, Quality Defense line)
• Engineering support for major SIPP review
• Regional events lesson learnt sharing and influence of global standards development
• Communication
• Single point of contact for regional sites and GFC central teams
• Provide alignment on metrics reporting
• Engineering, O&M and Others
• Expert understanding of each sites Electrical systems operational and maintenance capabilities in order to provide critical support
• In addition to your global Electrical engineering role you will also provide site/regional support for global facility initiatives at your location/region
• Technically lead a global cross functional team focused on project, design, construction, operational excellence with the site Electrical systems engineers
• Provide support to all sites including on site presence for construction project and critical Electrical failures of
• Actively involved in TPM implementation and alignment along with ongoing support for Electrical systems
• Drive improvement in the quality of our utilities through variation reduction (SPC).
• Drive the alignment for common methodologies including SPC, conformance, SIPP’s, MOC and 8D problem solving throughout the network for Electrical systems
• Identify and deploy cost reduction efforts while optimizing and reducing energy usage for Electrical systems throughout the network
• Assess and insure effective and consistent PM and predictive maintenance programs, procedures and checklists across the network
• Regular communication with the site engineering and O&M teams on status and performance
• Analyze and benchmark equipment performance.
• Identify and develop training and certification programs that support global and site efforts
• Develop appropriate metrics to drive improvement (On time PM’s, MTTF, MTTR etc.)
• Send out regular updates with key items of focus and initiatives.
• You will review FIPA/METS events and provide recommendations to drive the reduction of critical Electrical impact events.
• Collaborate with the construction / engineering team to insure alignment on projects
• Support the network effort to implement, monitor and drive continuous improvement for success of Micron’s Sustainability programs in alignment with the long-term Sustainability strategy
• Benchmark system performance and drive Best-In-Class approach (BICs) across network
• In depth review of site sustainability projects and sustainability data monitoring to support site’s and company’s sustainability targets.
• Provide technical advice and support to overcome challenges and roadblocks in project planning & execution
• Support sustainability projects achievement data acquisition and validation in central tracking depository.
• Conduct, Analyze and create improvement actions based on electrical systems studies using design software tools such as SKM or ETAP.

Education Required

• Bachelor’s Degree or equivalent experience in Electrical Engineering or any related field of study

Experience Required

• 10+ years of Facility Engineering experience and preferred with Semiconductor Industry experience.

Experience Desired

• Lead or actively involved in global facility engineering efforts

As a Micron Singapore Construction Electrical Engineer, you will play a key role in the design, installation, and commissioning of electrical systems in semiconductor manufacturing facilities. This role requires strong technical expertise, project management skills, and the ability to collaborate effectively with cross-functional teams to deliver projects on time and within budget.

Electrical Distribution

Key Responsibilities:

Electrical System Design & Engineering:
- Develop and review detailed electrical designs, including schematics, wiring diagrams, and system layouts, ensuring they meet the specific needs for manufacturing, cleanrooms and process areas.
- Perform load calculations, short circuit analysis, and system capacity planning to ensure electrical infrastructure is robust and reliable.
- Work with the general contractor to specify and select electrical equipment, such as switchgear, transformers, distribution panels, and backup power systems, ensuring compliance with industry standards.
- Collaborate with other engineering disciplines (mechanical, structural, etc.) to ensure the electrical design is integrated with other building systems.

Construction Support & Installation Oversight:
- Provide technical guidance to construction teams during the installation of electrical systems, ensuring adherence to design specifications, safety standards, and project timelines.
- Review and approve electrical submittals, shop drawings, and contractor work plans.
- Conduct regular site inspections to monitor progress, troubleshoot issues, and verify that electrical work is performed in compliance with codes and regulations.
- Work with the general contractor to manage and coordinate with subcontractors and suppliers for the procurement, delivery, and installation of electrical components.

Testing, Commissioning, & Handover:
- Oversee and participate in the testing and commissioning of electrical systems, including power distribution, lighting, emergency power, and control systems.
- Work with the general contractor and/or sub contractors to perform or oversee functional testing, troubleshooting, and adjustments to ensure systems operate according to design and client requirements.
- Review documentation for system handover, including as-built drawings, test reports, and operating manuals.
- Lead or support the transition to facilities operations, providing technical expertise during the ramp-up phase and ongoing support as needed.

Compliance, Safety, & Continuous Improvement:
- Ensure all electrical installations comply with relevant codes (e.g., NEC, IEEE), safety standards (NFPA, OSHA, MOM), and environmental regulations.
- Implement best practices for energy efficiency, sustainability, and electrical safety within semiconductor environments.
- Stay updated with the latest advancements in electrical engineering and semiconductor manufacturing technologies, recommending improvements or innovative solutions for future projects.
- Participate in post-project reviews and implement lessons learned to improve electrical designs and processes in subsequent projects.


Qualifications:

Education: Bachelor’s degree in Electrical Engineering or related field.
Experience: Minimum 5 years of experience in electrical engineering, preferably within the semiconductor or high-tech manufacturing sector.
Skills: Proficiency in electrical design software (AutoCAD, Revit, ETAP), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

Working Conditions:
This position requires working in both office environments and active construction sites, with occasional travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Description:-

• Report to R&D Manager
• Design and prepare manufacturing drawings of electrical switchboards
• Assemble modular drawings base on the panel design
• Perform Weight, Heat loss calculations and Air Flow simulations as required
• Prepare Material Order List for Mechanical parts
• Liaise with vendors for Material enquires
• Work closely with Manufacturing & Production team
• Perform other duties as directed by supervisor

Requirements:-

• Minimum Diploma/Higher NITEC/NITEC in Mechanical Engineering
• Knowledge in BIM, VertexG4 and AutoCAD M&E 3D drawings
• Mechnical background with 2D and 3D drafting skills
• Able to read and interpret manufacturing blueprints and specifications, recognize and identify different types of materials/sheet metals used in switchboards
• Proficient in 3D software, flat pattern development, PC skills and able to learn new software applications quickly
• Attentive to details with capability of self-checking for accuracy

As a Micron Singapore Construction ELV Engineer, for the design, installation, and commissioning of ELV systems in semiconductor manufacturing facilities. This role involves ensuring that the critical systems for communication, security, and control are properly integrated and functional to meet project requirements.

Extra Low Voltage Systems

Design & Engineering of ELV Systems:
- Design and develop ELV systems such as Life Safety System (LSS), fire alarms, CCTV, access control, public address systems, structured cabling, and building management systems (BMS).
- Perform detailed ELV system layout, cabling schedules, and interface drawings to ensure smooth integration with electrical and mechanical systems.
- Select and specify appropriate ELV components and devices, ensuring they meet project specifications and comply with local and international standards.
- Collaborate with other engineers (electrical, mechanical, etc.) to coordinate ELV designs with other building services.

Project Execution & Installation Oversight:
- Supervise and provide technical support during the installation of ELV systems, ensuring work is performed according to approved designs and specifications.
- Coordinate with contractors and subcontractors for the proper installation of cabling, devices, and control systems.
- Review shop drawings, submittals, and material selections from contractors to ensure compliance with project requirements.
- Conduct regular site inspections to monitor ELV installation progress, identify any issues, and ensure adherence to safety standards.

Testing, Commissioning, & Integration:
- Oversee and conduct system testing and commissioning of all ELV systems to verify they function as per design specifications and operational requirements.
- Ensure seamless integration of ELV systems with other building systems, such as HVAC, lighting controls, and security systems.
- Troubleshoot and resolve any technical issues during the testing and commissioning phases.
- Review as-built documentation, operation manuals, and test reports for handover to the client or facility operations team.

Compliance, Safety, & Continuous Improvement:
- Ensure all ELV installations comply with relevant codes and standards (e.g., NFPA, BICSI, TIA/EIA) and that safety protocols are strictly followed.
- Implement energy-efficient and scalable solutions for ELV systems, considering the evolving needs of semiconductor manufacturing facilities.
- Stay updated on advancements in ELV technologies, recommending system upgrades or improvements where applicable.
- Participate in post-project evaluations to gather lessons learned and apply best practices to future projects.

Qualifications:

Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field.
Experience: Minimum 5 years of experience in ELV systems design and installation, preferably within semiconductor or high-tech construction environments.
Certifications: Profinet certification is required,
Skills: Strong knowledge of ELV systems, proficient in AutoCAD, Revit, or similar design tools; excellent problem-solving and communication skills.

Working Conditions:
This position involves working in both office settings and on active construction sites, with the potential for travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education & Experience:

• Bachelor's or Master's degree in Mechanical Engineering, Mechatronics, or a related field.
• Proven experience in designing and improving mechanical systems, preferably in the food and beverage or automation industry.

Technical Skills:

• Strong understanding of mechanical design principles and optimization techniques.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
• Knowledge of materials science and its application to juice extraction mechanisms.
• Familiarity with automated vending machines or juicing equipment will be advantageous

Problem-Solving & Innovation:

• Demonstrate ability to identify inefficiencies and develop innovative solutions.
• Analytical mindset with attention to detail and a passion for continuous improvement.

Communication & Collaboration:

• Excellent communication skills to present technical concepts to diverse audiences.
• Strong team player with the ability to work collaboratively across departments.
• Willingness to travel occasionally for factory visits or international collaborations.

Job Requirements:

Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.

Experience:

• Minimum 3–5 years of relevant experience in construction project management in Singapore.
• Hands-on experience with local construction projects and regulatory requirements.

Skills:

• Proficiency in project management tools (e.g., MS Project, Primavera) and CAD software.
• Strong understanding of construction methods, materials, and local building regulations.
• Excellent leadership, problem-solving, and time-management abilities.
• Effective communication skills to liaise with stakeholders at all levels.

Key Responsibilities:

• Plan and execute construction projects, including budgeting, scheduling, and resource management.
• Collaborate with architects, contractors, and consultants to ensure project alignment with design specifications.
• Supervise on-site activities to ensure adherence to safety, quality, and compliance standards.
• Resolve technical and operational challenges during project execution.
• Prepare and present progress reports to stakeholders.
• Ensure compliance with Singapore's building codes, safety regulations, and environmental standards.

Responsible for creating, improving, and protecting our immediate environment. They plan and oversee construction and rebuilding, as well as the maintenance of roads, bridges, tunnels, railways, dams, harbors, power plants, and airports.Managing, designing, developing, creating and maintaining construction projects,Conducting on-site investigations and analyzing data,Assessing potential risks, materials and costs.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever!

We need someone who is passionate about detecting problems, making changes for the better, and seek out innovative ways in how predict device performance! We are an equal opportunity company who values of People, Innovation, Customer Focus, Tenacity and Collaboration.

As Yield Failure Analysis Engineer in Micron NAND Technology Integration (NTI) Singapore department, you will be responsible for providing yield analysis for next-generation Micron products. In this exciting role, you will become a domain expert on physical failure analysis methods for any given electrical failure! You will also participate in the identification and communication of yield issues, assist with the root cause analysis for process deviations, characterize, probe, parametric, and fabrication data to identify the sources of failures.

Your responsibilities will include, but are not limited to, the following:

Perform Failure analysis which includes conducting electrical characterization, perform electrical verification to confirm failures, and understanding PFA techniques available for de-processing failures

Drive failure analysis initiatives for the yield enhancement team. Create and deliver new methodologies, capabilities, and innovative ways for failure analysis de-processing failures

Participate in global meetings and present results to Product Development and Process Integrations teams

Collaborate with metrology and RDA team to re-define and validate inline detection capability

Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Understand and follow all health, safety, and environmental procedures and requirements.

Successful candidates for this position will have:

• Experience in the semiconductor industry in the areas of Process Integration, Yield Enhancement, Failure Analysis, Data Science, or Unit Process.
• In-depth knowledge and direct experience with nonvolatile memories
• Minimum 4 years of related work experience in yield analysis
• Good understanding of the process flow, and interaction of process and device.
• Poses theoretical and/or operational knowledge of scanning electron microscopes (SEM), focused ion beam (FIB), Transmission emission microscopes (TEM), and Elemental Analysis (EDS, EELS).
• Fluency in Python, JavaScript, C or C++ is Windows, Linux, JMP statistic software is desirable.
• Ability to be self-motivated and self-governing with confirmed ability to work in a demanding and dynamic environment.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.

Education:

B.S., M.S., or Ph.D. in Electrical Engineering, Microelectronics, Materials Science, Chemical Engineering, Physics, or a related field. We also consider applicants with equivalent experience.

Responsibilities

• Documenting and definng the Factory & Production processes and procedures across the Group
• Recommend and implement improvements to process and process automation
• Deploy and implement the Production processes and procedures in Singapore and overseas
• Manage the next-gen production system for switchgear manufacturing and assembly
• Responsible for the Audit and Compliance of Factory and Process Engineering across the Group
• Any other duties related to operations and process engineering

Requirement

• Degree/Diploma in Electrical, Mechanical Engineering or related field
• At least 2 years of relevant working experience in process engineering in the manufacturing environment
• Have initiative, able to work independently
• Possess strong analytical and problem solving skills
• Good communication and written and presentation skills
• Able to travel overseas

Roles & Resonsibilities

1. Attending site meetings

2. To co-ordinate and correspond with suppliers and consultants.

3. Supervision and quality checking

4. Manage and ensure workers in compliance

5. Send workers to/from project site/office/dorm daily basis

6. Arrange Materials and Manpower of Projects

Requirements:

1. Mininum Degree in Civil Engineering or related education diploma

2. Certificate in Managing Work at Height Course (MWAH) and Certificate in Assess Confined Space for Safe Entry and work is a plus.

3. Mininum 5 years related working experience in Singapore is a must.

4. Class 3 driving license

5. Good interpersonal, analytical and high level of problem-solving skill.

6. Able to work independently.

7. PC Skill

8. Long Working Hour, night shift might be required.

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

Job Description:

• Support Sales Manager to develop comprehensive BMS estimation which include preparation of tender submission and marketing materials during tender and follow up stage.
• Understand technical drawings and specification requirements.
• Establish good relationship with vendors and negotiate with them.
• All other ad hoc duties as assigned.

Requirements:

• At least Higher Nitec/ Diploma in Engineering Discipline
• Preferably some technical knowledge of BMS System
• Good communication skills and able to speak English well
• Well versed with Microsoft Office including Excel, Words, Powerpoint
• Team player
• Able to prioritizes, organized and multitasking
• Fresh graduates are welcome to apply. Training will be provided.

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.

Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• 2-3 years of experience in Semiconductor Equipment/Process development is preferable
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

This position will require the candidate to perform the tests of Instruments with Embedded and Networked subsystems using both automated and manual testing techniques.

The successful candidate will display a strong sense of ownership, motivation, and attention to detail.

Responsibilities:

• Responsible for designing, developing, and implementing robust white box test cases to ensure the quality and reliability of our software products.
• Write and execute manual and automated firmware tests by using Python. Carefully analyze and document test results.
• Support Illumina’s Diagnostics/Clinical platforms.
• Contribute to the test automation effort on multiple instruments and networked subsystems that power Illumina’s industry-leading DNA sequencing devices.
• Responsible for test reporting, quantitative and qualitative analysis of test data.
• Conduct testing of FPGA designs using various tools, identify issues, and collaborate with the development team for efficient debugging.
• Work with firmware senior testers and developers to drive all aspects of the firmware testing process for the team in Agile environment.
• Learn and have fun with some of the smartest cross functional engineers in Product Development

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Education:

• BS, MS in CS, EE, ME, Biomed., Bioeng., Bioinformatics, or related engineering field, or equivalent experience

Requirements:

• 0 - 2 years of experience in V&V, the software test/development field, with firmware/embedded SW experience.
• Experience in knowing embedded software test concepts, developing test cases, and using engineering analysis to test the edge conditions.
• Experience in white box testing using Python programs or knowing Pytest to perform firmware tests with TCP/IP interface.
• Able to understand firmware written in C
• Some experience with RTOS and OS: Linux and Windows
• Able to read PCB schematics and troubleshoot problems using lab equipment including JTAG tools, Wireshark, multi meters, oscilloscopes, etc.
• Able to understand the firmware requirement and architecture related to firmware tests.
• Knowledge of FPGA technologies and FPGA testing methodologies.
• Good problem solving and troubleshooting skills.
• Knowledge of Linux application test with shell scripts and test automation is a plus

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Job Description:

• Design, implement and optimize algorithms (e.g. SLAM) for real-time, high-precision localization of autonomous vehicles using sensor fusion of GNSS/IMU/DR, LiDAR, cameras, HD Map, and other sensors.
• Develop and maintain high-definition (HD) maps for autonomous driving applications. Work on the creation, updating, and management of detailed maps that include lane information, road geometry, traffic lights/signs, and other relevant features.
• Improve perception models for feature detection and tracking. Use deep learning and computer vision techniques to detect key features such as road boundaries, obstacles, and dynamic objects to enhance mapping and localization accuracy.
• Develop test plans, perform validation, and run simulations and testing to ensure the accuracy, reliability, and safety of mapping and localization systems in both controlled and real-world environments.
• Stay up to date with the latest advancements in localization, mapping, and autonomous driving technologies. Lead efforts to continuously improve the performance and capabilities of our mapping and localization systems.
• Write professional design and technical documentation.

Job Requirements:

• Master’s or Ph.D. degree in Robotics, Computer Science, Electrical and Electronic Engineering, Computer Vision, Deep Learning and AI, or a related field.
• Working experience in localization, mapping, or autonomous driving systems is preferred.
• Expertise in key mapping and localization techniques including GNSS/IMU/INS, SLAM, and especially deep learning-based perception and sensor fusion.
• Strong analytical and problem-solving skills, strong programming skills in Linux C/C++, excellent communication skills, ability to work collaboratively with the team, etc.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

As the Global Facilities Regional Engineering I&C Engineer we are looking for someone to be responsible for providing technical support, expertise, and lead business process alignment on construction project design, management, schedule, cost control, testing & commissioning, and operational and maintenance programs for the facility systems. This includes I&C, SCADA, Life Safety system, Toxic Gas Monitoring, Telecom, Security, IoT systems at all manufacturing sites in your location / region. As a distributed team member residing in your current site/geography, you will represent all facility design standard alignment, construction project management, and O&M BKM alignment initiatives!

You will also support the Global Facilities Central Engineering Team, Construction Team, Line Planning Team and O&M Team in providing critical design standard alignment, supplier quality improvement, operational and maintenance input, and support construction projects!

Critical metrics include construction project management, schedule, cost control, safety index, and facilities system reliability improvement program in eliminating production events that minimize lost moves and scrap.

Design and Plan Systems and Buildings

• Provide system designs for safe operations and maintenance.
• Develop, review, and maintain systems specifications and standards for the corporation.
• Engineering support for site system improvement projects (System Reliability Improvements, Quality Improvement and Equipment EOL replacements)
• Lead all aspects of regional efforts and find opportunities to align strategic program (eg BCP, Critical spec, Quality Defense line).
• Ensure designs align with all applicable standards, codes, and regulations.
• Review and advise sites on periodic system status presentations.
• Review and approve site capacity expansion and make business driven decisions on Facilities Reliability Improvement project capex.

Provide Project Support

• Provide Micron specifications and standards to Design Firms and review detailed designs and specifications for the installation of new facilities infrastructure.
• Provide support for cost and schedule estimates and justification for approval.
• Provide supervision and coordination of consultant resources.
• Ensure appropriate communication with local facilities, Design, Construction, Procurement and manufacturing partners as required to deliver project objectives.
• Responsible for the timely review of design packages and providing detailed comments and feedback as necessary.

Project Management/Planning

• Managing projects to ensure work is completed within the required scope, schedule, and budget.
• Preparing project Basis of design (BOD) documentation for bidding by third parties.
• Tracking system capacities and future loading to ensure upgrades are completed on time.
• Review and approval of project design drawings and 3D models and field installations during construction.
• Review and approval of equipment and component submittals, RFI's, and commissioned systems.

Provide Technical Support and Expertise

• Very knowledgeable of each sites Facility I&C / SCADA / IoT / Toxic Gas Monitoring, and Life Safety systems operational and maintenance capabilities in order to provide critical support.
• Provide site/regional support for global facility initiatives.
• Technically lead a global multi-functional team focused on project, design, construction, operational excellence.
• Provide support to all sites including on site presence for construction project and critical I&C failures of Facility systems.
• Actively involved in TPM implementation and alignment along with ongoing support for I&C systems.
• Drive improvement in the quality of our utilities through variation reduction (SPC).
• Drive the alignment for common methodologies including SPC, conformance, SIPP’s, MOC and 8D problem solving throughout the network for I&C systems
• Identify and deploy cost reduction efforts while optimizing and reducing energy usage. for I&C systems throughout the network.
• Assess and insure effective and consistent PM and predictive maintenance programs, procedures and checklists across the network
• Regular communication with the site engineering and O&M teams on status and performance
• Analyze and benchmark equipment performance.
• Identify and develop training and certification programs that support global and site efforts.
• Develop appropriate metrics to drive improvement (On time PM’s, MTTF, MTTR etc.).
• Send out regular updates with key items of focus and initiatives.
• You will review FIPA/METS events and provide recommendations to drive the reduction of critical I&C impact events.
• Collaborate with the construction/engineering team to insure alignment on projects.
• Support the network effort to implement, supervise and drive continuous improvement for success of Micron’s Sustainability programs in alignment with the long-term Sustainability strategy.
• Benchmark system performance and drive outstanding approach (BICs) across network.
• In depth review of site sustainability projects and sustainability data supervising to support site’s and company’s sustainability targets.
• Provide technical advice and support to overcome challenges and roadblocks in project planning & execution.

Job Requirements:

• Bachelor’s Degree in Electronics Engineering.
• Minimum 9 years of Facility I&C / SCADA / IoT / TGM systems Engineering experience.
• Familiarity with semiconductor manufacturing and facilities systems.
• Certified PROFINET Engineer
• AVEVA Application Developer

As a Micron Singapore Construction Facilities Mechanical (Dry System) Engineer, you will be designing, operating, and troubleshooting various Semiconductor Mechanical Dry systems. Engineering assignments usually include equipment or systems design and development, equipment/material testing, preparation of specifications, process study, research investigations, report preparation, and other activities requiring a good knowledge of mechanical, electrical, control principles and techniques.

Roles & Responsibilities

• Design, operate and fix HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Perform work, which involves conventional engineering practices including a variety of sophisticated features, such as conflicting design requirements, incompatibility of conventional materials, and difficult coordination requirements.
• Attend and participate in factory acceptance tests, (FAT), site acceptance tests (SAT) & equipment commissioning.
• Sustain operations, production personnel and construction trades to provide detailed designs and specifications for installing new capital equipment and systems.
• Conduct engineering and supervisory duties; coordinating outside consulting resources
• Assist in cost estimates and analysis for proposed projects; and providing support for starting up new equipment, which includes ensuring that all equipment connects with other mechanical and electrical systems seamlessly.
• Provide engineering services and review facilities work orders, maintain various administrative and engineering databases used for job tracking, engineering data, capital equipment facilitation, and critical system loads and capacities.
• Specify critical components for design projects and ensuring designs meet all applicable codes and rules.
• Provide code review and analysis using NFPA, FM, UBC, UFC, UMC, IBC, IMC, IFC, and NEC; perform research and development on emerging facilities and technologies to support innovative and groundbreaking semiconductor processes.
• Participate in mid to long-term infrastructure planning, ensuring facilities supports the overall company plan.
• Carry out all work in accordance with company safety guidelines
• Maintain good communication with the Mechanical Engineering organization, as well as other engineering teams and all customers throughout the organization.
• Collaborate with global facilities during the construction phase to ensure that lessons learnt are incorporated into the design where applicable.

Requirements:

• Education: Bachelor Degree in Mechanical Engineering or any related field is required.
• Experience: Minimum 3 years of experience in HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Detailed understanding of Semiconductor Mechanical Dry systems.
• Proficiency in digital literacy including word processing, spreadsheet, and database packages.
• Good team work and organizational skills.
• Excellent problem-solving and communication skills.'
• Able to work on multiple tasks concurrently and prioritize and schedule workload.
• Experience in semiconductor industry or high-tech construction environments are preferred!

Working Location:

Woodlands, 1 North Coast Drive, F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

As a Central PIE Yield Engineer / Senior Engineer / Principal Engineer at Micron Technology, Inc., you will be responsible for providing leadership to the global Micron network to drive yield, product quality improvement, new product introduction (NPI) through technical expertise, business process management and project execution.

This role needs to centralize the project information, including achievements, design requirements and testing difficulties from multiple departments located in Japan, Taiwan, Singapore, US; and drive the project to meet specs within defined tight schedule.

Responsibilities and Tasks

• Promote worldwide alignment for improved benchmark performance and efficiency gains through global project management and execution, network BKM leveraging and enhancement, and business process creation and re-engineering.
• Drives yield breakthroughs by understanding the comprehensive test flow across steps, testing conditions, product design/operation and propose an effective solution for yield versus reliability requirements.
• Foster innovation to solve yield issues with the help of generating ideas from characterizing the device fail-modes using the deeper expertise in device architecture, physics, and available testing knobs.
• Lead a multi-functional team to build frontiers in the areas of yield improvement by demonstrating the knowledge of test flow, device, bench characterization, fab process and technologies.
• Strong collaboration with Product, Test, Quality and Fab Engineering to develop best in class process, BKMs and work towards alignment across fabs, tech-nodes and technologies to achieve benchmark yield performance.
• Maintain and improve knowledge and technical expertise, explore innovation opportunities with critical thinking and detailed approach.
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Fab, Technology and Development, Product, Test and Quality Engineering.
• Communicate and respond to issues in a timely manner.
• Demonstrate ability to give effective presentations to both small and large groups on project updates and new initiative proposals.
• Periodically follow up with manager to ensure all type of goals are met and get assistance to remove obstacles.
• Travel to Micron Fab locations as necessary for face-to-face work.

Requirements

• Bachelor’s / Masters / PhD in Electrical Engineering, Microelectronics, Physics, or related field of study.
• Knowledge in Semiconductor Device Physics, DRAM/NAND/Logic product operations, parametric/electrical test, and probe yield.
• Experience in Product, Test, Yield, Design Engineering will be added advantage.
• Experience on DRAM High Bandwidth Memory will be a plus to this job position.
• Good data analysis, debugging, problem solving, reporting and presentation skills.
• Good multi-tasking, verbal, and written communication skills.
• Strong interpersonal skills and customer/co-worker relationships. Validated teamwork skills with a strong focus on developing good team dynamics.
• Good organizational capabilities and ability to work effectively with minimal direction.
• Intermediate to advanced PC skills including Microsoft Office.
• Ability to be flexible with job responsibilities and take the initiative to assume added responsibilities.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Roles & Resonsibilities

1. Attending site meetings.

2. To co-ordinate and correspond with suppliers and consultants.

3. Supervision and quality checking.

4. Manage and ensure workers in compliance.

5. Send workers to/from project site/office/dorm daily basis.

6. Arrange Materials and Manpower of Projects.

Requirements:

1. Mininum Degree in Civil Engineering or related education diploma

2. Certificate in Managing Work at Height Course (MWAH) and Certificate in Assess Confined Space for Safe Entry and work is a plus.

3. Mininum 9 year related working experience in Singapore is a must.

4. Class 3 driving license.

5. Good interpersonal, analytical and high level of problem-solving skill

6. Able to work independently.

7. PC Skill

8. Long Working Hour, night shift might be required

Job Summary

· To develop Motion Control Solutions and algorithm for precision stages and robotic applications

· To develop R&D product development integration with motion control solutions

· Evaluation of R&D product performance

Job Responsibilities

1. Development of Motion Control with complex motion profile requirement for jerk reduction, vibration control

and force control

2. Development of R&D products in accordance to motion control solutions

3. Technical review of motion control products, including controllers, drivers, encoders and any peripherals

4. Provide technical support for product range including motion controllers, PLC, HMI, motor drives, DDT motors

and actuators, encoders and robotic arms.

5. Diverse a vibration monitoring system for predictive maintenance investigation

People Requirements

1. PhD/Degree / Diploma in any Mechatronics, Electrical, Electronic, Control or relevant Engineering discipline

2. Familiar and knowledgeable in Closed-loop Control systems and precision engineering

3. Knowledgeable in control systems principles and electrical fundamentals

4. Programing in C#

5. Self-motivated and good communication skills

Description

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Diffusion team on the key technology issues that need Technology Development (TD) breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise TD Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
• Ownership of module business process

Requirements

• PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are welcomed to apply.
• Minimum 4 years of relevant experience in Diffusion process development.
• A deep understanding of flow dynamics , thermodynamics, physical phenomena and their direct application to Diffusion deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2 - 4 months at a stretch to work on technology development

We are looking for a highly motivated, ambitious, result driven individual with strong work ethic and integrity to join us as a Photolithography Process Development Engineer/Senior Engineer in NAND Technology Integration (NTI) R&D group. You will be using state of the art equipment to support activities associated with rapid deployment of technology nodes, process margin improvement activities and ensure extended engagement with manufacturing on the upcoming technology nodes.

You are responsible for, but are not limited to, the following:

• Develop and optimize lithography processes to meet yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing photolithography team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Collaborate with Boise R&D peers on technology adaptation and cost optimization towards upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Possess the above qualities ? Join Us !

Responsibilities:

• Review and analyze experimental process flows: Identify defect anomalies and quarantine out-of-control process tools.
• Embrace continuous improvement: Seek ways to enhance operations
• Raise awareness of process anomalies: Recognize and communicate issues promptly.
• Leverage inline process signals: Drive process improvements using real-time data.
• Explore new inspection tools and strategies: Aim for earlier problem detection and source identification.
• Innovate with existing tools: Develop techniques to identify relevant process issues.
• Manage image classification models: Enable automated reporting systems.
• Collaborate with the global network to develop best-known methods and maintain alignment between sites.

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)