ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

Job Overview:
The Service Engineer plays a critical role in managing and executing complex maintenance tasks and troubleshooting for our fire protection systems. This role involves technical expertise and close collaboration with the service team to ensure system functionality and client satisfaction.

Key Responsibilities:

• Conduct in-depth inspections, diagnostics, and repairs on advanced fire protection equipment.
• Provide technical guidance and support to the service team, ensuring high-quality service delivery.
• Document and report service activities, system performance, and client feedback.
• Initiate project meeting and work schedules.
• Assist Service Team manager in monitoring and managing the day- to-day operations of project.
• Assist in training junior technicians on system maintenance and troubleshooting.
• Adhere to all safety guidelines and industry standards in field operations.

Requirements:

• Min Diploma in engineering or a related field, or equivalent experience.
• 2 - 3 years of relevant experience in servicing, commissioning or engineering or related field
• Experience with fire protection system (eg fire alarm panel) will be in advantage
• Strong technical knowledge and problem-solving skills.
• Excellent communication and teamwork abilities.
• Detailed oriented, multi –tasking and able to handle stress

Job Descriptions:

• Prepares detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.
• Reviews and understands bidding employer’s requirement documents, project specifications, and process data.
• Translates employer requirements into effective contractor solutions that align with project goals.
• Works closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidates and integrates collected information into comprehensive bid proposals.
• Conducts internal reporting of tender solutions to secure management approval for bid submissions.
• Provides timely and accurate updates on bid progress to the tender manager.
• Support engineering tasks about technical proposals.
• Evaluates subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrates subcontractor solutions into the company’s bid proposals effectively.

Requirements:

• Minimum Diploma or Bachelor’s degree in engineering, or a related field.
• Prior experience and knowledge in offshore wind projects is highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Job Title: Application Engineer

Department: Sales & Solutions, Global

Report to: Solutions Lead

Xnergy is a multi-VC funded and Sovereign-backed, global deeptech leader in high power universal wireless charging for global electrified mobility. With deployment presence in close to 40 countries, adopted by almost 100 autonomous robot companies, Xnergy was voted an APAC 25 company in 2020 by Cleantech Group.

* The APAC 25 is an annual list of 25 private sustainable innovation companies that are regarded as having the potential to make a significant impact in a five-to-ten-year time frame.

With its HQ in Singapore, Xnergy is expanding its physical offices beyond its current Suzhou subsidiary branch, into new markets of Korea, US/LATAM, EU & Japan over the next 2 years.

An Application Engineer serves as the technical liaison between a company and its clients, ensuring software or hardware solutions are effectively implemented and tailored to meet customer needs. This role combines engineering expertise, problem-solving skills, and customer interaction to deliver and support high-quality solutions.

Essential Functions/Responsibilities

1. Technical Support & Troubleshooting

o Collaborate with clients to identify and resolve technical issues.

o Analyze system requirements and recommend tailored solutions.

o Debug, diagnose, and fix application or performance issues in local and remotely.

2. Product Development & Customization

o Adapt existing software or hardware to meet specific client requirements.

o Assist in the design, testing, and deployment of custom applications.

o Provide feedback to product teams for continuous improvement.

3. Customer Interaction

o Work closely with clients to understand their business processes and technical needs.

o Conduct training sessions and workshops to help clients use solutions effectively.

o Build strong relationships to ensure customer satisfaction and retention.

4. Project Management

o Collaborate with cross-functional teams to ensure timely delivery of projects.

o Manage client expectations, timelines, and deliverables.

o Create documentation and reports for stakeholders.

5. Sales and Pre-Sales Support

o Provide technical expertise during the sales process, including demos and presentations.

o Assist in drafting proposals and technical requirements for potential clients.

Education and Experience

1. Fresh graduate/ Diploma in engineering (e.g., software, mechanical, electrical) is welcome to apply.

2. Understanding of programming languages (e.g., Python, C, C++), systems, or platforms relevant to the role.

3. Prior experience in robotic, automation or battery system is a plus.

4. Experience with application development, troubleshooting, or support.

5. Excellent communication and interpersonal skills for working with clients and teams.

6. Analytical mindset with strong problem-solving capabilities.

7. Oversea travelling is expected for global clients support.

Job Description:

• Familiar with HVAC offshore / marine regulations and rules, such as, SOLAS, ABS, DNV, NORSOK, ASHRAE, ISO 7547, 8861 etc.
• Preparation of cooling load calculation, ventilation system design, air conditioning design, pressure drop calculation, duct sizing, grille/diffuser sizing, material take off etc.
• Responsible for HVAC equipment sizing and selection.
• Preparation of P&ID, D&ID and ducting layout drawings etc.
• Preparation of electrical single line diagram, cable block diagram, control diagram, termination diagram, electrical load calculation HVAC system logic diagram, HVAC Cable schedule etc.
• Ensure the HVAC system design and equipment selection are compliance with client specification, class regulation and hazardous area classification.
• Submission of HVAC/Architectural Design document and drawings for class approval.
• Technical submission (drawings and document) checking and revision control.
• Preparation of technical specification, technical bid evaluations.
• Interface with other disciplines and provide necessary guidance on HVAC/Architectural installation.
• Technical Clarification with Client and Vendor.
• Involved actively and monitoring the engineering, procurement, construction and commissioning HVAC system and architectural work.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Instruct supervisors/foreman on a day-to-day basis for work progress.
• Liaise with representatives, classification society surveyors and other to comply with inspection requirements.
• Resolve any technical problems or issues faced at work site.
• Monitors progress and instruct supervisors and foreman on safety and quality.
• Maintain the file copy of all latest revision drawings, approved procedures, client site instruction, project specifications, raised AFI and client signed reports for materialreceiving inspection and mechanical works for internal and external audits.
• Prepare Red-Line Mark-up as per site changes and submit to Engineering Dept to prepare as-built.

Job Requirement:

• Diploma/Degree in Mechanical Engineering
• At least 5 year experiences in Bolt Torque and Flange Management in Marine shipyard
• Experience in Marine HVAC installation and testing
• Experience in troubling shooting HVAC system and equipments

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Role Overview:

We are seeking an experienced QA Engineer with a strong background in the oil and gas sector, specifically in FPSO projects. The QA Engineer will be responsible for ensuring that all quality assurance and quality control procedures are in place, adhered to, and continuously improved throughout the project lifecycle.

Key Responsibilities:

1. Quality Management System (QMS):
   Develop, implement, and maintain the project-specific Quality Management System in alignment with ISO standards.
   Ensure compliance with company policies, client requirements, and regulatory standards.
2. Project QA Oversight:
   Conduct regular quality audits, inspections, and surveillance activities on FPSO project sites.
   Identify and document non-conformances, and lead the resolution process to prevent recurrence.
   Ensure that all QA documentation is properly maintained and accessible.
3. Supplier and Vendor Quality Control:
   Review and approve vendor QA/QC documentation.
   Conduct supplier audits to ensure compliance with project quality requirements.
   Coordinate with procurement teams to ensure that materials and equipment meet quality specifications.
4. Engineering & Fabrication Quality Assurance:
   Ensure that engineering designs, drawings, and specifications comply with quality requirements.
   Monitor fabrication and construction activities to ensure they are carried out according to approved procedures and quality standards.
5. Testing & Commissioning:
   Oversee testing and commissioning processes to ensure systems meet quality standards before handover.
   Verify that all test procedures and results are properly documented.
6. Risk Management:
   Identify potential quality risks and implement mitigating measures.
   Participate in risk assessments and HSE (Health, Safety, and Environment) meetings.
7. Training and Continuous Improvement:
   Provide training to project teams on quality processes and best practices.
   Promote a culture of continuous improvement by identifying opportunities for process optimization.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 5 years of experience in a QA role within the oil and gas industry, with specific experience in FPSO projects.
• In-depth knowledge of quality management systems (e.g., ISO 9001) and industry standards.
• Strong understanding of fabrication, construction, and commissioning processes for FPSOs.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership skills.
• Certification in quality auditing (e.g., ISO 9001 Lead Auditor) is an advantage.

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Addcel has been delivering deep value to clients across Semi-con, Pharmaceutical, Data Centers & Oil & Gas industries since 2010.

Specialising in Design & Build of process utility systems, prefabrication/ DFMA, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

The Process Engineer reports to the Tender Manager and is responsible for the below:

• Design and develop industrial processes to improve efficiency and safety.
• Perform calculations for flow rates, pump sizing, temperature, and pressure.
• Develop and review process design documents and specifications.
• Utilize process simulation software to model and optimize processes.
• Collaborate with cross-functional teams, including operations, maintenance, and project management.
• Provide technical support and troubleshooting for process-related issues.
• Ensure compliance with industry standards and regulations.
• Conduct risk assessments and implement safety measures.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Min. 3 - 5 years of relevant working experience, preferably in Semi-con, Data-centre, Pharma & Oil & Gas.
• Strong knowledge of process design principles and methodologies.
• Experience in the oil & gas, chemical, or manufacturing industries.
• Experience in extracting BOQ from layout and P&ID drawings for tender preparation.
• Experience in attending technical clarification meetings and presentation
• Familiarity with Distributed Control Systems (DCS) and instrumentation.
• Strong knowledge of process utilities design (Chilled Water, Steam, Process Cooling Water, and CDA systems).
• Proficient in pipe sizing, stress analysis, pump head, and hydraulic calculations.
• Familiarity with proposal costing and tendering processes in EPC projects.
• Strong communication skills with the ability to propose alternative technical solutions.
• Detail-oriented and proficient in Excel.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work effectively in a team environment.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Unlock your potential with us! Join us as a Technical Sales Engineer who will be involved primarily in high temperature and corrosion resistant (nickel alloy) materials supporting the petrochemical, aviation, waste to energy, pharmaceutical sector. Your positivity and energy will thrive in this new, rewarding opportunity.

Responsibilities

• Work with well-established customers base in the petrochemical | pharmaceutical | aviation, and OEM industries in Singapore
• Interpret customer requirements
• Understand industry standards and specifications
• Read customer drawings and generate bill of materials
• Formulate sales proposals and negotiate directly with end users to close orders
• Negotiate procurement of materials, parts, sub-contract services and logistics

Requirements

• Degree or Diploma in an engineering discipline
• Working knowledge of industrial piping and related hardware
• Reward driven with a real desire to improve sales and business margins
• Proficient with MS Excel

Advantages

The following optional skills or work experience would be an advantage

• Familiarity with ASME | DIN | JIS and similar material specifications
• Previous experience in a plant or on-site maintenance or engineering role

Additional Information

*The position will be in an office based working environment. No outdoor sales required.

*Applicants without prior sales experience but with engineering background may be considered.

*Monthly Salary Range shown excludes commission component.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

Job Title: Procurement Engineer - Electrical & Instrumentation (E&I)

Main Responsibilities:

1. Supplier Sourcing & RFQs:Source potential suppliers in line with project specifications. Send out Requests for Quotation (RFQs) to suppliers and evaluate responses.
2. Vendor Management:Evaluate new and existing suppliers for inclusion in the Approved Vendor List (AVL). Coordinate with vendors for technical clarifications and requirements.
3. Negotiations & Purchase Orders:Perform negotiations with shortlisted suppliers to obtain the best price while ensuring timely delivery. Ensure that appropriate terms and conditions are included in the purchase orders. Prepare Bidtabs for internal approval. Prepare Purchaser’s Terms & Conditions for purchases over SGD 150K.
4. Project Coordination:Coordinate with the Project Team and suppliers for all procurement-related issues. Manage urgent purchases and ensure timely order processing. Ensure coordination with Material/Logistic Controllers for Goods Receipt/Issue (GR/GI) issues.
5. Vendor Training & Product Presentation:Organize training sessions and product presentations from vendors to ensure project teams are informed of key product specifications and details.
6. Delivery & Expediting:Monitor and ensure the timely delivery of materials and equipment from vendors. Assist in expediting deliveries when required and coordinate with Finance for invoice-related issues.
7. Return & Replacement:Coordinate with vendors for returns or replacements of defective materials. Issue Purchase Orders (PO) for replacements, as necessary.
8. Documentation & Reporting:Maintain accurate records of procurement activities and report to Supervisor on progress. Ensure all procurement documents are archived and accessible as per company requirements.

Qualifications & Skills:

• Diploma / Bachelor's degree in Engineering, Supply Chain Management, or a related field.
• Proven experience in procurement and supply chain management, especially in Electrical & Instrumentation (E&I).
• Strong negotiation skills and vendor relationship management.
• Proficient in procurement software and MS Office (Excel, Word, PowerPoint).
• Ability to work in a team and handle multiple tasks simultaneously.
• Strong organizational and communication skills.
• Knowledge of industry standards and regulations in procurement.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system